The SIOCATMARK ioctl takes an argument which should be a
pointer to an integer where the kernel will write the result.
We were incorrectly declaring it as TYPE_NULL which would mean
it would always fail (with EFAULT) when it should succeed.
Correct the type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TIOCGPTN and related terminal control ioctls were not converted to the guest ioctl format on x86_64 targets. Convert these ioctls to enable terminal functionality on x86_64 guests.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add some new blk ioctls (these are 0x12,119 through
to 0x12,127). Several of these are used by mke2fs; this silences
the warnings:
mke2fs 1.42.12 (29-Aug-2014)
Unsupported ioctl: cmd=0x127b
Unsupported ioctl: cmd=0x127a
warning: Unable to get device geometry for /dev/loop5
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x1277
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If userspace specifies a short buffer for a target sockaddr,
the kernel will only copy in as much as it has space for
(or none at all if the length is zero) -- see the kernel
move_addr_to_user() function. Mimic this in QEMU's
host_to_target_sockaddr() routine.
In particular, this fixes a segfault running the LTP
recvfrom01 test, where the guest makes a recvfrom()
call with a bad buffer pointer and other parameters which
cause the kernel to set the addrlen to zero; because we
did not skip the attempt to swap the sa_family field we
segfaulted on the bad address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Commit 655ed67c2a which switched synchronous signals to
benig recorded in ts->sync_signal rather than in a queue
with every other signal had a bug: we failed to clear
the flag indicating that a synchronous signal was pending
when we delivered it. This meant that we would take the signal
again and again every time the guest made a syscall.
(This is a bug introduced in my refactoring of Timothy Baldwin's
original code.)
Fix this by passing in the struct emulated_sigtable* to
handle_pending_signal(), so that we clear the pending flag
in the ts->sync_signal struct when handling a synchronous signal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The LOOP_GET_STATUS and LOOP_GET_STATUS64 ioctls were incorrectly
defined as IOC_W rather than IOC_R, which meant we weren't
correctly copying the information back from the kernel to the guest.
The loop_info64 structure definition was also missing a member
and using the wrong type for several 32-bit fields.
In particular, this meant that "kpartx -d image.img" didn't work
and "losetup -a" behaved strangely. Correct the ioctl type definitions.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The BLKSSZGET ioctl takes an argument which is a pointer to an int.
We were incorrectly declaring it to take a pointer to a long, which
meant that we would incorrectly write to memory which we should not
if the guest is a 64-bit architecture.
In particular, kpartx uses this ioctl to write to an int on the
stack, which tends to result in it crashing immediately.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the /dev/loop-control ioctls:
LOOP_CTL_ADD
LOOP_CTL_REMOVE
LOOP_CTL_GET_FREE
[RV: fixed to apply to new header guards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Many syscalls which take a sigset_t argument also take an argument
giving the size of the sigset_t. The kernel insists that this
matches its idea of the type size and fails EINVAL if it is not.
Implement this logic in QEMU. (This mostly just means some LTP test
cases which check error cases now pass.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Nested types are used by the kernel to send link information and
protocol properties.
We can see following errors with "ip link show":
Unimplemented nested type 26
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
This patch implements nested types 18 (IFLA_LINKINFO) and
26 (IFLA_AF_SPEC).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As we convert sockaddr for AF_PACKET family for sendto() (target to
host) we need also to convert this for getsockname() (host to target).
arping uses getsockname() to get the the interface address and uses
this address with sendto().
Tested with:
/sbin/arping -D -q -c2 -I eno1 192.168.122.88
...
getsockname(3, {sa_family=AF_PACKET, proto=0x806, if2,
pkttype=PACKET_HOST, addr(6)={1, 10c37b6b9a76}, [18]) = 0
...
sendto(3, "..." 28, 0,
{sa_family=AF_PACKET, proto=0x806, if2, pkttype=PACKET_HOST,
addr(6)={1, ffffffffffff}, 20) = 28
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Netlink is byte-swapping data in the guest memory (it's bad).
It's ok when the data come from the host as they are generated by the
host.
But it doesn't work when data come from the guest: the guest can
try to reuse these data whereas they have been byte-swapped.
This is what happens in glibc:
glibc generates a sequence number in nlh.nlmsg_seq and calls
sendto() with this nlh. In sendto(), we byte-swap nlmsg.seq.
Later, after the recvmsg(), glibc compares nlh.nlmsg_seq with
sequence number given in return, and of course it fails (hangs),
because nlh.nlmsg_seq is not valid anymore.
The involved code in glibc is:
sysdeps/unix/sysv/linux/check_pf.c:make_request()
...
req.nlh.nlmsg_seq = time (NULL);
...
if (TEMP_FAILURE_RETRY (__sendto (fd, (void *) &req, sizeof (req), 0,
(struct sockaddr *) &nladdr,
sizeof (nladdr))) < 0)
<here req.nlh.nlmsg_seq has been byte-swapped>
...
do
{
...
ssize_t read_len = TEMP_FAILURE_RETRY (__recvmsg (fd, &msg, 0));
...
struct nlmsghdr *nlmh;
for (nlmh = (struct nlmsghdr *) buf;
NLMSG_OK (nlmh, (size_t) read_len);
nlmh = (struct nlmsghdr *) NLMSG_NEXT (nlmh, read_len))
{
<we compare nlmh->nlmsg_seq with corrupted req.nlh.nlmsg_seq>
if (nladdr.nl_pid != 0 || (pid_t) nlmh->nlmsg_pid != pid
|| nlmh->nlmsg_seq != req.nlh.nlmsg_seq)
continue;
...
else if (nlmh->nlmsg_type == NLMSG_DONE)
/* We found the end, leave the loop. */
done = true;
}
}
while (! done);
As we have a continue on "nlmh->nlmsg_seq != req.nlh.nlmsg_seq",
"done" cannot be set to "true" and we have an infinite loop.
It's why commands like "apt-get update" or "dnf update hangs".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
fd_trans_target_to_host_data() and fd_trans_host_to_target_data() must
return the length of processed data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=40ci
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20160718.0' into staging
VFIO update 2016-07-18
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
# gpg: Signature made Mon 18 Jul 2016 18:02:27 BST
# gpg: using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-update-20160718.0:
vfio/pci: Hide ARI capability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Due to changes in flush behaviour clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands
started to fail.
This change adds additional DMA writes to affected tests before sending
flush commands so that bdrv_flush actually generates flush_to_disk event.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
The following sequence of tests discovered a problem in IDE emulation:
1. Send DMA write to IDE device 0
2. Send CMD_FLUSH_CACHE to same IDE device which will be failed by block
layer using blkdebug script in tests/ide-test:test_retry_flush
When doing DMA request ide/core.c will set s->retry_unit to s->unit in
ide_start_dma. When dma completes ide_set_inactive sets retry_unit to -1.
After that ide_flush_cache runs and fails thanks to blkdebug.
ide_flush_cb calls ide_handle_rw_error which asserts that s->retry_unit
== s->unit. But s->retry_unit is still -1 after previous DMA completion
and flush does not use anything related to retry.
This patch restricts retry unit assertion only to ops that actually use
retry logic.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Code to set and clear state associated with retry in moved into
ide_set_retry and ide_clear_retry to make adding retry setups easier.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Events with the 'vcpu' property are conditionally emitted according to
their per-vCPU state. Other events are emitted normally based on their
global tracing state.
Note that the per-vCPU condition check applies to all tracing backends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A new event attribute 'cpu_id' is added to have a separate ID
space ('TRACE_VCPU_*') for all events with the 'vcpu' property.
These are later used to identify which events are enabled on each vCPU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
Also fixed coding style on for(;;) and else statement as suggested by
Eric Blake <eblake@redhat.com> since the patch modifies these lines or
close enough.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860252322.30668.18276041739086338328.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU supports ARI on downstream ports and assigned devices may support
ARI in their extended capabilities. The endpoint ARI capability
specifies the next function, such that the OS doesn't need to walk
each possible function, however this next function is relative to the
host, not the guest. This leads to device discovery issues when we
combine separate functions into virtual multi-function packages in a
guest. For example, SR-IOV VFs are not enumerated by simply probing
the function address space, therefore the ARI next-function field is
zero. When we combine multiple VFs together as a multi-function
device in the guest, the guest OS identifies ARI is enabled, relies on
this next-function field, and stops looking for additional function
after the first is found.
Long term we should expose the ARI capability to the guest to enable
configurations with more than 8 functions per slot, but this requires
additional QEMU PCI infrastructure to manage the next-function field
for multiple, otherwise independent devices. In the short term,
hiding this capability allows equivalent functionality to what we
currently have on non-express chipsets.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This file is actually the header for async.c and aio-*.c., so add it to
the same section.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468826387-10473-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No need duplicate the judgment, there is one in function entry.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468814749-14510-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Renames look like this with git-diff(1) when diff.renames = true is set:
diff --git a/a b/b
similarity index 100%
rename from a
rename to b
This raises the "Does not appear to be a unified-diff format patch"
error because checkpatch.pl only considers a diff valid if it contains
at least one "@@" hunk.
This patch accepts renames and copies too so that checkpatch.pl exits
successfully when a diff only renames/copies files. The git diff
extended header format is described on the git-diff(1) man page.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468576014-28788-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Parameter **errp of aio_context_setup() is useless, remove it
and clean up the related code.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468578524-23433-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Invoking io_setup(MAX_EVENTS) we ask kernel to create ring buffer for us
with specified number of events. But kernel ring buffer allocation logic
is a bit tricky (ring buffer is page size aligned + some percpu allocation
are required) so eventually more than requested events number is allocated.
From a userspace side we have to follow the convention and should not try
to io_submit() more or logic, which consumes completed events, should be
changed accordingly. The pitfall is in the following sequence:
MAX_EVENTS = 128
io_setup(MAX_EVENTS)
io_submit(MAX_EVENTS)
io_submit(MAX_EVENTS)
/* now 256 events are in-flight */
io_getevents(MAX_EVENTS) = 128
/* we can handle only 128 events at once, to be sure
* that nothing is pended the io_getevents(MAX_EVENTS)
* call must be invoked once more or hang will happen. */
To prevent the hang or reiteration of io_getevents() call this patch
restricts the number of in-flights, which is now limited to MAX_EVENTS.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468415004-31755-1-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This has better performance because it executes fewer system calls
and does not use a bottom half per disk.
Originally proposed by Ming Lei.
[Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix
build error as reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467650000-51385-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
squash! linux-aio: share one LinuxAioState within an AioContext
We have only one flag for now - Empty Image flag. The patch fixes unused
bits specification and marks bit 1 as usused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K5vl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160718' into staging
ppc patch queue 2016-07-18
Here's what ought to be the final ppc pull request before the 2.7 hard
freeze. This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.
# gpg: Signature made Mon 18 Jul 2016 05:35:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160718:
ppc: Yet another fix for the huge page support detection mechanism
target-ppc: fix left shift overflow in hpte_page_shift
ppc/mmu-hash64: Remove duplicated #include statement
ppc: abort if compat property contains an unknown value
spapr: Ensure CPU cores are added contiguously and removed in LIFO order
vfio/spapr: Remove stale ioctl() call
ppc: Fix support for odd MSR combinations
dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
dbdma: fix load_word/store_word value endianness
dbdma: fix endian of DBDMA_CMDPTR_LO during branch
dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
spapr: fix core unplug crash
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 86b50f2e1b ("Disable huge page support if it is not available
for main RAM") already made sure that huge page support is not announced
to the guest if the normal RAM of non-NUMA configurations is not backed
by a huge page filesystem. However, there is one more case that can go
wrong: NUMA is enabled, but the RAM of the NUMA nodes are not configured
with huge page support (and only the memory of a DIMM is configured with
it). When QEMU is started with the following command line for example,
the Linux guest currently crashes because it is trying to use huge pages
on a memory region that does not support huge pages:
qemu-system-ppc64 -enable-kvm ... -m 1G,slots=4,maxmem=32G -object \
memory-backend-file,policy=default,mem-path=/hugepages,size=1G,id=mem-mem1 \
-device pc-dimm,id=dimm-mem1,memdev=mem-mem1 -smp 2 \
-numa node,nodeid=0 -numa node,nodeid=1
To fix this issue, we've got to make sure to disable huge page support,
too, when there is a NUMA node that is not using a memory backend with
huge page support.
Fixes: 86b50f2e1b
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ps->pte_enc is a 32-bit value, which is shifted left and then compared
to a 64-bit value. It needs a cast before the shift.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is not possible to set the compat property to an unknown value with
powerpc_set_compat(). Something must have gone terribly wrong in QEMU,
if we detect an "Internal error" in powerpc_get_compat(). Let's abort then.
This patch also drops the "max_compat ? *max_compat : -1" construct. It is
useless since max_compat is dereferenced a few lines above.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If CPU core addition or removal is allowed in random order leading to
holes in the core id range (and hence in the cpu_index range), migration
can fail as migration with holes in cpu_index range isn't yet handled
correctly.
Prevent this situation by enforcing the addition in contiguous order
and removal in LIFO order so that we never end up with holes in
cpu_index range.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This ioctl() call to VFIO_IOMMU_SPAPR_TCE_REMOVE was left over from an
earlier version of the code and has since been folded into
vfio_spapr_remove_window().
It wasn't caught because although the argument structure has been removed,
the libc function remove() means this didn't trigger a compile failure.
The ioctl() was also almost certain to fail silently and harmlessly with
the bogus argument, so this wasn't caught in testing.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
MacOS uses an architecturally illegal MSR combination that
seems nonetheless supported by 32-bit processors, which is
to have MSR[PR]=1 and one or more of MSR[DR/IR/EE]=0.
This adds support for it. To work properly we need to also
properly include support for PR=1,{I,D}R=0 to the MMU index
used by the qemu TLB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Otherwise MacOS 9 hangs upon shutdown.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
