Add support of escape sequence "\e[5n" and "\e[6n" to console.
"\e[5n" reports status of console and it always succeed
in virtual console.
"\e[6n" reports now cursor position in console.
Signed-off-by: Ren Kimura <rkx1209dev@gmail.com>
Message-id: 1457466681-7714-2-git-send-email-rkx1209dev@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
buffer_find_nonzero_offset() is a hot function during live migration.
Now it use SSE2 instructions for optimization. For platform supports
AVX2 instructions, use AVX2 instructions for optimization can help
to improve the performance of buffer_find_nonzero_offset() about 30%
comparing to SSE2.
Live migration can be faster with this optimization, the test result
shows that for an 8GiB RAM idle guest just boots, this patch can help
to shorten the total live migration time about 6%.
This patch use the ifunc mechanism to select the proper function when
running, for platform supports AVX2, execute the AVX2 instructions,
else, execute the original instructions.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1457416397-26671-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Detect if the compiler can support the ifun and avx2, if so, set
CONFIG_AVX2_OPT which will be used to turn on the avx2 instruction
optimization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1457416397-26671-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
I'd missed the sync count off in the postcopy case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 1456394631-18010-1-git-send-email-dgilbert@redhat.com
Message-Id: <1456394631-18010-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Maintain a list of all input devices. Add an option to make grab
work across all devices (so toggling grab on the keybard can switch
over the mouse too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1457087116-4379-3-git-send-email-kraxel@redhat.com
This patch adds support for reading input events directly from linux
evdev devices and forward them to the guest. Unlike virtio-input-host
which simply passes on all events to the guest without looking at them
this will interpret the events and feed them into the qemu input
subsystem.
Therefore this is limited to what the qemu input subsystem and the
emulated input devices are able to handle. Also there is no support for
absolute coordinates (tablet/touchscreen). So we are talking here about
basic mouse and keyboard support.
The advantage is that it'll work without virtio-input drivers in the
guest, the events are delivered to the usual ps/2 or usb input devices
(depending on what the machine happens to have). And for keyboards
qemu is able to switch the keyboard between guest and host on hotkey.
The hotkey is hard-coded for now (both control keys), initialy the
guest owns the keyboard.
Probably most useful when assigning vga devices with vfio and using a
physical monitor instead of vnc/spice/gtk as guest display.
Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command
line. Note that udev has rules which populate /dev/input/by-{id,path}
with static names, which might be more convinient to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
Add a fw_cfg device node to the ACPI DSDT. This is mostly
informational, as the authoritative fw_cfg MMIO region(s)
are listed in the Device Tree. However, since we are building
ACPI tables, we might as well be thorough while at it...
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1455906029-25565-5-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a fw_cfg device node to the ACPI DSDT. While the guest-side
firmware can't utilize this information (since it has to access
the hard-coded fw_cfg device to extract ACPI tables to begin with),
having fw_cfg listed in ACPI will help the guest kernel keep a more
accurate inventory of in-use IO port regions.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1455906029-25565-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move BIOS_CFG_IOPORT define from pc.c to pc.h, and rename
it to FW_CFG_IO_BASE.
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1455906029-25565-3-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJW3oNAAAoJEO8Ells5jWIRCNIH/iJ7ZKfnhSxQB4/dJdPNA72N
V8QA4Ta+FTV0yiEXBgoK1QyCOgs+GsJ8Ip6jBPz3B+tPhYaQl2L7QlqS3fdn73P6
9MwdzJp4LTB6txOw7YsxCEz3yRSNAfxPsAouIyeYROwuNnD8IOI4XxNTt7cig6Ku
jm6KTNk5p4dacJD3HIFPzkqw63XkyyGpLzOjJWW7s3ZwafVlPKVLZCTXGIMmHE5L
USQdR7Le5I9HsrsygdrDaXo1fopKdt56efPVm2lhpL1IJBkR21ixYqcdVGrOKwo2
KofLtUY/cHvGtluufU0FMih5OCg1q/Pz0NdTv29afWMQ0hiIuB5GhfptRdNdHKI=
=ozGZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 08 Mar 2016 07:46:08 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: check packet payload length
filter-buffer: Add status_changed callback processing
filter: Add 'status' property for filter object
rocker: allow user to specify rocker world by property
rocker: add name field into WorldOps ale let world specify its name
rocker: return -ENOMEM in case of some world alloc fails
rocker: forbid to change world type
net: netmap: probe netmap interface for virtio-net header
net: simplify net_init_tap_one logic
MAINTAINERS: Add entries for include/net/ files
net: filter: correctly remove filter from the list during finalization
net: ne2000: check ring buffer control registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the size of the control register (FW_CFG_CTL_SIZE) in fw_cfg.h.
Add comment to fw_cfg_io_realize() pointing out that since the
8-bit data register is always subsumed by the 16-bit control
register in the port I/O case, we use the control register width
as the *total* width of the (classic, non-DMA) port I/O region reserved
for the device.
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Message-id: 1455906029-25565-2-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If you have hardware cursor and you are reconnecting the VNC client
you need to send the cursor. Failing to do so make the cursor invisible
till is changed.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 1456929142-14033-1-git-send-email-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While computing IP checksum, 'net_checksum_calculate' reads
payload length from the packet. It could exceed the given 'data'
buffer size. Add a check to avoid it.
Reported-by: Liu Ling <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While the status of filter-buffer changing from 'on' to 'off',
it need to release all the buffered packets, and delete the related
timer, while switch from 'off' to 'on', it need to resume the release
packets timer.
Here, we extract the process of setup timer into a new helper,
which will be used in the new status_changed callback.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.
For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.
We will skip the disabled ('off') filter when delivering packets in net layer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add property to specify rocker world. All ports will be assigned to this
world.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Until now, 0 is returned in this error case. Fix it ro return -ENOMEM.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Port to world assignment should be permitted only by qemu user. Driver
should not be able to do it, so forbid that possibility.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previous implementation of has_ufo, has_vnet_hdr, has_vnet_hdr_len, etc.
did not really probe for virtio-net header support for the netmap
interface attached to the backend. These callbacks were correct for
VALE ports, but incorrect for hardware NICs, pipes, monitors, etc.
This patch fixes the implementation to work properly with all kinds
of netmap ports.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_init_tap_one receives in vhostfdname a fd name from vhostfd= or
vhostfds=, or NULL if there is no vhostfd=/vhostfds=. It is simpler
to just check vhostfdname, than it is to check for vhostfd= or
vhostfds=. This also calms down Coverity, which otherwise thinks
that monitor_fd_param could dereference a NULL vhostfdname.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The include/net/ files correspond to the files in the net/ directory,
thus there should be corresponding entries in the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Qemu may crash when we want to add two filters on the same netdev but
the initialization of second fails (e.g missing parameters):
./qemu-system-x86_64 -netdev user,id=un0 \
-object filter-buffer,id=f0,netdev=un0,interval=10 \
-object filter-buffer,id=f1,netdev=un0
Segmentation fault (core dumped)
This is because we don't check whether or not the filter was in the
list of netdev. This patch fixes this.
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. Registers PSTART & PSTOP
define ring buffer size & location. Setting these registers
to invalid values could lead to infinite loop or OOB r/w
access issues. Add check to avoid it.
Reported-by: Yang Hongke <yanghongke@huawei.com>
Tested-by: Yang Hongke <yanghongke@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QSIMPLEQ supports appending to tail in O(1) and is intrusive so
it doesn't require extra memory allocations for the bookkeeping
data.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1457010971-24771-1-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
* mru_section optimization from Fam
* memory.txt improvements from Peter and Xiaoqiang
* i8257 fix from Hervé
* -daemonize fix
* Cleanups and small fixes from Alex, Praneith, Wei
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW3bWrAAoJEL/70l94x66De2oH/ik70S43ooJVPLePPspWefAm
9CuMmv6PK8KhMKqhmZWfneOdjwRYx7U1OYa9KsZErLlSmCul7p8o4JV/Nx+nGgUP
L4LCJIutEsEyZ1U8dG0jPuq5DyHScCRHPF7IpSid5dpOK5VA4MCmBZgHd4JvwJhi
VE1xl/5w9xgIkuxQSC8ybLr7SVLeS9qOaDZxci6mRC3ZAJ2NtqR7IpmpmghsXNtP
iY69a6lSzbfYvJ+ToPFhx1KwcjbZUrV5UNC4ceQ9tYihj89Oi+DOjh5mZ5IuumEb
OjKMFoKNaHUbY3nPTYqmlHamT8OZnQf1NhCXkd9EMqPGiHywsYbWzIOy7mxVQ68=
=H40p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* RAMBlock vs. MemoryRegion cleanups from Fam
* mru_section optimization from Fam
* memory.txt improvements from Peter and Xiaoqiang
* i8257 fix from Hervé
* -daemonize fix
* Cleanups and small fixes from Alex, Praneith, Wei
# gpg: Signature made Mon 07 Mar 2016 17:08:59 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
scsi-bus: Remove tape command from scsi_req_xfer
kvm/irqchip: use bitmap utility for gsi tracking
MAINTAINERS: Add entry for include/sysemu/kvm*.h
doc/memory.txt: correct description of MemoryRegionOps fields
doc/memory.txt: correct a logic error
icount: possible options for sleep are on or off
exec: Introduce AddressSpaceDispatch.mru_section
exec: Factor out section_covers_addr
exec: Pass RAMBlock pointer to qemu_ram_free
memory: Drop MemoryRegion.ram_addr
memory: Implement memory_region_get_ram_addr with mr->ram_block
memory: Move assignment to ram_block to memory_region_init_*
exec: Return RAMBlock pointer from allocating functions
i8257: fix Terminal Count status
log: do not log if QEMU is daemonized but without -D
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the RECOVER_BUFFERED_DATA command from the list of commands that
are handled by scsi_req_xfer(). Given that this command is
tape-specific, it should be handled only by scsi_stream_req_xfer().
Signed-off-by: Alex Pyrgiotis <apyrgio@arrikto.com>
Message-Id: <1457365822-22435-1-git-send-email-apyrgio@arrikto.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By using utilities in bitops and bitmap, this patch tries to make it more
friendly to audience. No functional change.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Message-Id: <1457229445-25954-1-git-send-email-richard.weiyang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The include/sysemu/kvm*.h header files should be part of
the overall KVM section.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1456403605-26587-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probably what happened was that when the API was being designed it
started off with an 'aligned' field, and then later the field name
and semantics were changed but the docs weren't updated to match.
Similarly, cpu_register_io_memory() does not exist anymore, so
clarify the documentation for .old_mmio.
Reported-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the regions overlap example, region B has a higher priority thus
should has a larger priority number than C.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1456476051-15121-1-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
icount sleep takes on or off as options. A few places mention sleep=no
which is not accepted. This patch corrects them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <1456499811-16819-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Under heavy workloads the lookup will likely end up with the same
MemoryRegionSection from last time. Using a pointer to cache the result,
like ram_list.mru_block, significantly reduces cost of
address_space_translate.
During address space topology update, as->dispatch will be reallocated
so the pointer is invalidated automatically.
Perf reports a visible drop on the cpu usage, because phys_page_find is
not called. Before:
2.35% qemu-system-x86_64 [.] phys_page_find
0.97% qemu-system-x86_64 [.] address_space_translate_internal
0.95% qemu-system-x86_64 [.] address_space_translate
0.55% qemu-system-x86_64 [.] address_space_lookup_region
After:
0.97% qemu-system-x86_64 [.] address_space_translate_internal
0.97% qemu-system-x86_64 [.] address_space_lookup_region
0.84% qemu-system-x86_64 [.] address_space_translate
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-8-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be shared by the next patch.
Also add a comment explaining the unobvious condition on "size.hi".
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-7-git-send-email-famz@redhat.com>
[Small change to the comment. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only caller now knows exactly which RAMBlock to free, so it's not
necessary to do the lookup.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-6-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All references to mr->ram_addr are replaced by
memory_region_get_ram_addr(mr) (except for a few assertions that are
replaced with mr->ram_block).
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-5-git-send-email-famz@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't force "const" qualifiers with pointers in QEMU, but it's still
good to keep a clean function interface. Assigning to mr->ram_block is
in this sense ugly - one initializer mutating its owning object's state.
Move it to memory_region_init_*, where mr->ram_addr is assigned.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously we return RAMBlock.offset; now return the pointer to the
whole structure.
ram_block_add returns void now, error is completely passed with errp.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a DMA transfer is done (ie all bytes have been transfered), the corresponding
Terminal Count bit must be set in the status register.
This bit is already cleared in i8257_read_cont and i8257_write_cont when required.
This fixes (at least) floppy transfer in IBM 40p firmware, which checks in DMA
controller if everything went fine.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1456404332-31556-1-git-send-email-hpoussin@reactos.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 96c33a4 ("log: Redirect stderr to logfile if deamonized",
2016-02-22) wanted to move stderr of a daemonized QEMU to the file
specified with -D.
However, if -D was not passed, the patch had the side effect of not
redirecting stderr to /dev/null. This happened because qemu_logfile
was set to stderr rather than the expected value of NULL. The fix
is simply in the "if" condition of do_qemu_set_log; the "if" for
closing the file is also changed to match.
Reported-by: Jan Tomko <jtomko@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
