Current QEMU cannot detect vhost-user backend disconnection. The
patch adds ability to know it.
To know disconnection, add watcher to detect G_IO_HUP event. When
G_IO_HUP event is detected, the disconnected socket will be read
to cause a CHR_EVENT_CLOSED.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fix SID verification failure when IOMMU IR is enabled with PCI
bridges. Existing pci_requester_id() is more like getting BDF info
only. Renaming it to pci_get_bdf(). Meanwhile, we provide the correct
implementation to get requester ID. VT-d spec 5.1.1 is a good reference
to go, though it talks only about interrupt delivery, the rule works
exactly the same for non-interrupt cases.
Currently, there are three use cases for pci_requester_id():
- PCIX status bits: here we need BDF only, not requester ID. Replacing
with pci_get_bdf().
- PCIe Error injection and MSI delivery: for both these cases, we are
looking for requester IDs. Here we should use the new impl.
To avoid a PCI walk every time we send MSI message, one requester_id
cache field is added to PCIDevice to cache the result when initialize
PCI device.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Neon instructions VCVTA, VCVTM, VCVTN, VCVTP, VRINTA, VRINTM,
VRINTN, VRINTP, VRINTX, and VRINTZ were only introduced with ARMv8,
so they need a guard to make them UNDEF if the CPU only supports ARMv7.
(We got this right for all the other new-in-v8 insns, but forgot
it for these Neon 2-reg-misc ops.)
Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465492511-9333-1-git-send-email-peter.maydell@linaro.org
This adds the DP and the DPDMA to the Zynq MP platform.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the implementation of the DisplayPort.
It has an aux-bus to access dpcd and edid.
Graphic plane is connected to the channel 3.
Video plane is connected to the channel 0.
Audio stream are connected to the channels 4 and 5.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-9-git-send-email-fred.konrad@greensocs.com
[PMM: fixed format strings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the implementation of the DPDMA.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement an I2C slave which implements DDC and returns the
EDID data for an attached monitor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com
- Rebased on the current master.
- Modified for QOM.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
[PMM: actually wire up the vmstate to dc->vmsd]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces dpcd module.
It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces a new bus: aux-bus.
It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the control flow logic between send and recv (error checking
etc) is the same. Factor this out into a common send_recv() API.
This is then usable by clients, where the control logic for send
and receive differs only by a boolean. E.g.
if (send)
i2c_send(...):
else
i2c_recv(...);
becomes:
i2c_send_recv(... , send);
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com
Changes from FK:
* Rebased on master.
* Rebased on my i2c broadcast patch.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This does a write to every slaves when the I2C bus get a write to address 0.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dev field in i2cbus is not used.
So just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
split the old SysBus init function into an instance_init
and a Device realize function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-13-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
split the old SysBus init function into an instance_init
and a Device realize function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-12-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-8-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge the pl061_initfn into pl061_init
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Split the old SysBus init into an instance_init and
DeviceClass::realize function
* Drop the SysBus init function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Split the omap_i2c_init into an instance_init and realize function
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Rename the exynos4210_i2c_realize to exynos4210_i2c_init
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465746713-30414-5-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create two variants of DEFINE_VIRT_MACHINE. One, just called
DEFINE_VIRT_MACHINE, that does not set properties that only
the latest machine type should have, and another that does.
This will hopefully reduce potential for errors when adding
new versions.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465746713-30414-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use DEFINE_VIRT_MACHINE to generate versioned machine type info.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465746713-30414-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename machvirt_info (which is specifically for 2.6 TypeInfo)
to machvirt_2_6_info, and separate the type registration of the
abstract machine type from the versioned type.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465746713-30414-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6459b94c26 broke reset and migration of the AArch32
TTBCR(S) register if the guest used non-LPAE page tables. This is
because the AArch32 TTBCR register definition is marked as ARM_CP_ALIAS,
meaning that the AArch64 variant has to handle migration and reset.
Although AArch64 TCR_EL3 doesn't need to care about the mask and
base_mask fields, AArch32 may do so, and so we must use the special
TTBCR reset and raw write functions to ensure they are set correctly.
This doesn't affect TCR_EL2, because the AArch32 equivalent of that
is HTCR, which never uses the non-LPAE page table variant.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pranith Kumar <bobby.prani+qemu@gmail.com>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1465488181-31977-1-git-send-email-peter.maydell@linaro.org
Add PMU IRQ number in ACPI table, then we can use PMU in guest through
ACPI.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a virtual PMU device for virt machine while use PPI 7 for PMU
overflow interrupt number.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check if kvm supports guest PMUv3. If so, set the corresponding feature
bit for vcpu.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
If qdev_try_create() is passed NULL for the bus, it will automatically
put the newly created device onto the default system bus. However
if the device is not actually a SysBusDevice then this will result
in later crashes (for instance when running the monitor "info qtree"
command) because code reasonably assumes that all devices on the system
bus are system bus devices.
Generally the mistake is that the calling code should create the
object with object_new(TYPE_FOO) rather than qdev_create(NULL, TYPE_FOO);
see commit 6749695eaa for an example of fixing this bug.
Assert in qdev_try_create() if the device isn't suitable to put on
the system bus, so that this mistake results in failure earlier
and more reliably.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The current algorithm for I/O interrupts would result in a wrong
interrupt type for subchannel numbers fffe and ffff. In addition
a non adapter interrupt might look like an adapter interrupt for
any subchannel number that has the 0x0400 bit set.
No kernel has ever used the type outside logging - and the logging
was wrong all the time. For everything else the kernel used the
interrupt parameters.
Let's use the KVM_S390_INT_IO macro as for adapter interrupts.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The sclp scp read info call fills in a buffer with information about the
system. With more than 248 CPUs we overflow the 4k buffer of the SCCB,
leading to random data corruption. Basically ALL guest operating systems
call scp read info, so let's limit the machines to 248 CPUs to make it
obvious that >=249 does not work.
As KVM also limits itself to 248 and TCG on s390 does not support
SMP, this should cause no regression for any user as no VMs with more
than 248 VCPUs were ever possible.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This allows to trace changes in the summary and queue indicators
for the non-irqfd case. For irqfd, kernel traces are needed instead.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's introduce a CssDevId to handle device ids of the xx.x.xxxx
type used for channel devices. This has some benefits:
- We can use them in virtio-ccw and split the validity checks for
a channel device id in general from the constraint checking
within the virtio-ccw scope.
- We can reuse the device id type for future non-virtio channel
devices.
While we're at it, improve the validity checks and disallow e.g.
trailing characters.
Suggested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
According to the Principles of Operation (more precisely the subsection
'Channel-Report Word'), a subchannel put into the installed parameters
initialized state is in the same state as after an I/O system reset (just
parameters possibly changed). This implies that any I/O interrupts for that
subchannel are no longer pending (as I/O system resets clear I/O
interrupts). Therefore, we need an interface to clear pending I/O
interrupts. Make css_generate_sch_crws clear the pending IO interrupts for
the subchannel.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
According to the platform specification, under certain conditions,
pending IO interruptions have to be cleared. Let's add an interface
for that.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Latest patch queue for ppc.
* Allow qemu to support a generic architecture 2.07 (POWER8-era)
compatibility mode. This is useful for guests which are POWER8
aware, but don't know about the specific POWER8 variant that
qemu (and/or KVM) is emulating. (Thomas Huth)
* Fix a bug where macio wasn't removing DMA mappings (Mark Cave-Ayland)
* Add a workaround for Linux guest's miscalculation of maximum
memory address (including hotplugged memory), which could break
when hotplug memory was combined with VFIO. The previous
approach was technically correct by spec, but differed from
PowerVM's behaviour enough to trip a guest kernel bug. This
works around the bug, while remaining correct-to-spec. (Bharata Rao)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e1PQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160614' into staging
ppc patch queue for 2016-06-14
Latest patch queue for ppc.
* Allow qemu to support a generic architecture 2.07 (POWER8-era)
compatibility mode. This is useful for guests which are POWER8
aware, but don't know about the specific POWER8 variant that
qemu (and/or KVM) is emulating. (Thomas Huth)
* Fix a bug where macio wasn't removing DMA mappings (Mark Cave-Ayland)
* Add a workaround for Linux guest's miscalculation of maximum
memory address (including hotplugged memory), which could break
when hotplug memory was combined with VFIO. The previous
approach was technically correct by spec, but differed from
PowerVM's behaviour enough to trip a guest kernel bug. This
works around the bug, while remaining correct-to-spec. (Bharata Rao)
# gpg: Signature made Tue 14 Jun 2016 06:53:58 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160614:
spapr: Ensure all LMBs are represented in ibm,dynamic-memory
macio: call dma_memory_unmap() at the end of each DMA transfer
Add PowerPC AT_HWCAP2 definitions
ppc: Add PowerISA 2.07 compatibility mode
ppc: Improve PCR bit selection in ppc_set_compat()
ppc: Provide function to get CPU class of the host CPU
ppc: Split pcr_mask settings into supported bits and the register mask
ppc/spapr: Refactor h_client_architecture_support() CPU parsing code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Memory hotplug can fail for some combinations of RAM and maxmem when
DDW is enabled in the presence of devices like nec-usb-xhci. DDW depends
on maximum addressable memory returned by guest and this value is currently
being calculated wrongly by the guest kernel routine memory_hotplug_max().
While there is an attempt to fix the guest kernel, this patch works
around the problem within QEMU itself.
memory_hotplug_max() routine in the guest kernel arrives at max
addressable memory by multiplying lmb-size with the lmb-count obtained
from ibm,dynamic-memory property. There are two assumptions here:
- All LMBs are part of ibm,dynamic memory: This is not true for PowerKVM
where only hot-pluggable LMBs are present in this property.
- The memory area comprising of RAM and hotplug region is contiguous: This
needn't be true always for PowerKVM as there can be gap between
boot time RAM and hotplug region.
To work around this guest kernel bug, ensure that ibm,dynamic-memory
has information about all the LMBs (RMA, boot-time LMBs, future
hotpluggable LMBs, and dummy LMBs to cover the gap between RAM and
hotpluggable region).
RMA is represented separately by memory@0 node. Hence mark RMA LMBs
and also the LMBs for the gap b/n RAM and hotpluggable region as
reserved and as having no valid DRC so that these LMBs are not considered
by the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This ensures that the underlying memory is marked dirty once the transfer
is complete and resolves cache coherency problems under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We need the PPC_FEATURE2_HAS_HTM bit in a subsequent patch, so
add the PowerPC AT_HWCAP2 definitions.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that guests can use the PowerISA 2.07 CPU sPAPR
compatibility mode when they request it and the target CPU
supports it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using an olderr PowerISA level, all the upper compatibility
bits have to be enabled, too. For example when we want to run
something in PowerISA 2.05 compatibility mode on POWER8, the bit
for 2.06 has to be set beside the bit for 2.05.
Additionally, to make sure that we do not set bits that are not
supported by the host, we apply a mask with the known-to-be-good
bits here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Added some #ifs to fix compile on 32-bit targets]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
