The bulk of the work here, beyond base HPD, is defining the
TTBCR2 register. In addition we must check TTBCR.T2E, which
is not present (RES0) for AArch64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the TCR_*.HPD bits were RES0 in ARMv8.0, we can simply
interpret the bits as if ARMv8.1-HPD is present without checking.
We will need a slightly different check for hpd for aarch32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because EL3 has a fixed execution mode, we can properly decide
which of the bits are RES{0,1}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The enable for TGE has already occurred within arm_hcr_el2_amo
and friends. Moreover, when E2H is also set, the sense is
supposed to be reversed, which has also already occurred within
the helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the same time, define the fields for these registers,
and use those defines in arm_pamax().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed up typo (s/achf/ahcf/) belatedly spotted by RTH]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hyp mode is an exception to the general rule that each AArch32
mode has its own r13, r14 and SPSR -- it has a banked r13 and
SPSR but shares its r14 with User and System mode. We were
incorrectly implementing it as banked, which meant that on
entry to Hyp mode r14 was 0 rather than the USR/SYS r14.
We provide a new function r14_bank_number() which is like
the existing bank_number() but provides the index into
env->banked_r14[]; bank_number() provides the index to use
for env->banked_r13[] and env->banked_cpsr[].
All the points in the code that were using bank_number()
to index into env->banked_r14[] are updated for consintency:
* switch_mode() -- this is the only place where we fix
an actual bug
* aarch64_sync_32_to_64() and aarch64_sync_64_to_32():
no behavioural change as we already special-cased Hyp R14
* kvm32.c: no behavioural change since the guest can't ever
be in Hyp mode, but conceptually the right thing to do
* msr_banked()/mrs_banked(): we can never get to the case
that accesses banked_r14[] with tgtmode == ARM_CPU_MODE_HYP,
so no behavioural change
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109173553.22341-2-peter.maydell@linaro.org
In commit 8a0fc3a29f we tried to implement HCR_EL2.{VI,VF},
but we got it wrong and had to revert it.
In that commit we implemented them as simply tracking whether there
is a pending virtual IRQ or virtual FIQ. This is not correct -- these
bits cause a software-generated VIRQ/VFIQ, which is distinct from
whether there is a hardware-generated VIRQ/VFIQ caused by the
external interrupt controller. So we need to track separately
the HCR_EL2 bit state and the external virq/vfiq line state, and
OR the two together to get the actual pending VIRQ/VFIQ state.
Fixes: 8a0fc3a29f
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181109134731.11605-4-peter.maydell@linaro.org
This reverts commit 8a0fc3a29f.
The implementation of HCR.VI and VF in that commit is not
correct -- they do not track the overall "is there a pending
VIRQ or VFIQ" status, but whether there is a pending interrupt
due to "this mechanism", ie the hypervisor having set the VI/VF
bits. The overall pending state for VIRQ and VFIQ is effectively
the logical OR of the inbound lines from the GIC with the
VI and VF bits. Commit 8a0fc3a29f would result in pending
VIRQ/VFIQ possibly being lost when the hypervisor wrote to HCR.
As a preliminary to implementing the HCR.VI/VF feature properly,
revert the broken one entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109134731.11605-2-peter.maydell@linaro.org
This would cause an infinite recursion or loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181110121711.15257-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove a TODO comment about implementing the vectored interrupt
controller. We have had an implementation of that for a decade;
it's in hw/intc/pl190.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181106164118.16184-1-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Before we supported direct execution from MMIO regions, we
implemented workarounds in commit 7204243599
which let us avoid doing so, even if the SAU or MPU region
was less than page-sized.
Once we implemented execute-from-MMIO, we removed part
of those workarounds in commit d4b6275df320cee76; but
we forgot the one in get_phys_addr_pmsav8() which
suppressed use of small SAU regions in executable regions.
Remove that workaround now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181106163801.14474-1-peter.maydell@linaro.org
ATS1HR and ATS1HW (which allow AArch32 EL2 to do address translations
on the EL2 translation regime) were implemented in commit 14db7fe09a.
However, we got them wrong: these should do stage 1 address translations
as defined for NS-EL2, which is ARMMMUIdx_S1E2. We were incorrectly
making them perform stage 2 translations.
A few years later in commit 1313e2d7e2 we forgot entirely that
we'd implemented ATS1Hx, and added a comment that ATS1Hx were
"not supported yet". Remove the comment; there is no extra code
needed to handle these operations in do_ats_write(), because
arm_s1_regime_using_lpae_format() returns true for ARMMMUIdx_S1E2,
which forces 64-bit PAR format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-3-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In do_ats_write() we construct a PAR value based on the result
of the translation. A comment says "S2WLK and FSTAGE are always
zero, because we don't implement virtualization".
Since we do in fact now implement virtualization, add the missing
code that sets these bits based on the reported ARMMMUFaultInfo.
(These bits are named PTW and S in ARMv8, so we follow that
convention in the new comments in this patch.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-2-peter.maydell@linaro.org
Since QEMU does not implement ASIDs, changes to the ASID must flush the
tlb. However, if the ASID does not change there is no reason to flush.
In testing a boot of the Ubuntu installer to the first menu, this reduces
the number of flushes by 30%, or nearly 600k instances.
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181019015617.22583-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL3 version of this register does not include an ASID,
and so the tlb_flush performed by vmsa_ttbr_write is not needed.
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181019015617.22583-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome
provided in HSR has more information than is reported to AArch64.
Specifically, there are extra fields TA and coproc which indicate
whether the trapped instruction was FP or SIMD. Add this extra
information to the syndromes we construct, and mask it out when
taking the exception to AArch64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-11-peter.maydell@linaro.org
For the v7 version of the Arm architecture, the IL bit in
syndrome register values where the field is not valid was
defined to be UNK/SBZP. In v8 this is RES1, which is what
QEMU currently implements. Handle the desired v7 behaviour
by squashing the IL bit for the affected cases:
* EC == EC_UNCATEGORIZED
* prefetch aborts
* data aborts where ISV is 0
(The fourth case listed in the v8 Arm ARM DDI 0487C.a in
section G7.2.70, "illegal state exception", can't happen
on a v7 CPU.)
This deals with a corner case noted in a comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-10-peter.maydell@linaro.org
Create and use a utility function to extract the EC field
from a syndrome, rather than open-coding the shift.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-9-peter.maydell@linaro.org
If the HCR_EL2 PTW virtualizaiton configuration register bit
is set, then this means that a stage 2 Permission fault must
be generated if a stage 1 translation table access is made
to an address that is mapped as Device memory in stage 2.
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-8-peter.maydell@linaro.org
The HCR_EL2 VI and VF bits are supposed to track whether there is
a pending virtual IRQ or virtual FIQ. For QEMU we store the
pending VIRQ/VFIQ status in cs->interrupt_request, so this means:
* if the register is read we must get these bit values from
cs->interrupt_request
* if the register is written then we must write the bit
values back into cs->interrupt_request
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-7-peter.maydell@linaro.org
The A/I/F bits in ISR_EL1 should track the virtual interrupt
status, not the physical interrupt status, if the associated
HCR_EL2.AMO/IMO/FMO bit is set. Implement this, rather than
always showing the physical interrupt status.
We don't currently implement anything to do with external
aborts, so this applies only to the I and F bits (though it
ought to be possible for the outer guest to present a virtual
external abort to the inner guest, even if QEMU doesn't
emulate physical external aborts, so there is missing
functionality in this area).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-6-peter.maydell@linaro.org
The HCR.DC virtualization configuration register bit has the
following effects:
* SCTLR.M behaves as if it is 0 for all purposes except
direct reads of the bit
* HCR.VM behaves as if it is 1 for all purposes except
direct reads of the bit
* the memory type produced by the first stage of the EL1&EL0
translation regime is Normal Non-Shareable,
Inner Write-Back Read-Allocate Write-Allocate,
Outer Write-Back Read-Allocate Write-Allocate.
Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-5-peter.maydell@linaro.org
The HCR.FB virtualization configuration register bit requests that
TLB maintenance, branch predictor invalidate-all and icache
invalidate-all operations performed in NS EL1 should be upgraded
from "local CPU only to "broadcast within Inner Shareable domain".
For QEMU we NOP the branch predictor and icache operations, so
we only need to upgrade the TLB invalidates:
AArch32 TLBIALL, TLBIMVA, TLBIASID, DTLBIALL, DTLBIMVA, DTLBIASID,
ITLBIALL, ITLBIMVA, ITLBIASID, TLBIMVAA, TLBIMVAL, TLBIMVAAL
AArch64 TLBI VMALLE1, TLBI VAE1, TLBI ASIDE1, TLBI VAAE1,
TLBI VALE1, TLBI VAALE1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-4-peter.maydell@linaro.org
The switch_mode() function is defined in target/arm/helper.c and used
only in that file and nowhere else, so we can make it file-local
rather than global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-3-peter.maydell@linaro.org
For AArch32, exception return happens through certain kinds
of CPSR write. We don't currently have any CPU_LOG_INT logging
of these events (unlike AArch64, where we log in the ERET
instruction). Add some suitable logging.
This will log exception returns like this:
Exception return from AArch32 hyp to usr PC 0x80100374
paralleling the existing logging in the exception_return
helper for AArch64 exception returns:
Exception return from AArch64 EL2 to AArch64 EL0 PC 0x8003045c
Exception return from AArch64 EL2 to AArch32 EL0 PC 0x8003045c
(Note that an AArch32 exception return can only be
AArch32->AArch32, never to AArch64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-2-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create struct ARMISARegisters, to be accessed during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The get_phys_addr() functions take a pointer to an ARMMMUFaultInfo
struct, which they fill in only if a fault occurs. This means that
the caller must always zero-initialize the struct before passing
it in. We forgot to do this in v7m_stack_read() and v7m_stack_write().
Correct the error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011172057.9466-1-peter.maydell@linaro.org
This is an amendment to my earlier patch:
commit 7ece99b17e
Author: Aaron Lindsay <alindsay@codeaurora.org>
Date: Thu Apr 26 11:04:39 2018 +0100
target/arm: Mask PMU register writes based on PMCR_EL0.N
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-3-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I previously fixed this for PMINTENSET_EL1, but missed these.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-2-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present we assert:
arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.
The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible. Add an extra argument to provide
it from the surrounding context.
Fixes: 0ab5953b00
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updating the NS stack pointer via MSR to SP_NS should include
a check whether the new SP value is below the stack limit.
No other kinds of update to the various stack pointer and
limit registers via MSR should perform a check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-14-peter.maydell@linaro.org
Check the v8M stack limits when pushing the frame for a
non-secure function call via BLXNS.
In order to be able to generate the exception we need to
promote raise_exception() from being local to op_helper.c
so we can call it from helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-8-peter.maydell@linaro.org
Add checks for breaches of the v8M stack limit when the
stack pointer is decremented to push the exception frame
for exception entry.
Note that the exception-entry case is unique in that the
stack pointer is updated to be the limit value if the limit
is hit (per rule R_ZLZG).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-7-peter.maydell@linaro.org
We're going to want v7m_using_psp() in op_helper.c in the
next patch, so move it from helper.c to internals.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-4-peter.maydell@linaro.org
Define EXCP_STKOF, and arrange for it to cause us to take
a UsageFault with CFSR.STKOF set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-3-peter.maydell@linaro.org
The Arm v8M architecture includes hardware stack limit checking.
When certain instructions update the stack pointer, if the new
value of SP is below the limit set in the associated limit register
then an exception is taken. Add a TB flag that tracks whether
the limit-checking code needs to be emitted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181002163556.10279-2-peter.maydell@linaro.org
Use the existing helpers to determine if (1) the fpu is enabled,
(2) sve state is enabled, and (3) the current sve vector length.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE vector length can change when changing EL, or when writing
to one of the ZCR_ELn registers.
For correctness, our implementation requires that predicate bits
that are inaccessible are never set. Which means noticing length
changes and zeroing the appropriate register bits.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to want to determine whether sve is enabled
for EL other than current.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for EL3 before testing CPTR_EL3.EZ. Return 0 when the exception
should be routed via AdvSIMDFPAccessTrap. Mirror the structure of
CheckSVEEnabled more closely.
Fixes: 5be5e8eda7
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that the only field defined for this new register may only
be 0, we don't actually need to change anything except the name.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A cut-and-paste error meant we were reading r4 from the v8M
callee-saves exception stack frame twice. This is harmless
since it just meant we did two memory accesses to the same
location, but it's unnecessary. Delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002150304.2287-1-peter.maydell@linaro.org
In v7m_exception_taken() we were incorrectly using a
"LR bit EXCRET.ES is 1" check when it should be 0
(compare the pseudocode ExceptionTaken() function).
This meant we didn't stack the callee-saved registers
when tailchaining from a NonSecure to a Secure exception.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002145940.30931-1-peter.maydell@linaro.org
Not only are the sve-related tb_flags fields unused when SVE is
disabled, but not all of the cpu registers are initialized properly
for computing same. This can corrupt other fields by ORing in -1,
which might result in QEMU crashing.
This bug was not present in 3.0, but this patch is cc'd to
stable because adf92eab90 where the bug was
introduced was marked for stable.
Fixes: adf92eab90
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On 32-bit exception entry, CPSR.J must always be set to 0
(see v7A Arm ARM DDI0406C.c B1.8.5). CPSR.IL must also
be cleared on 32-bit exception entry (see v8A Arm ARM
DDI0487C.a G1.10).
Clear these bits. (This fixes a bug which will never be noticed
by non-buggy guests.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-6-peter.maydell@linaro.org
Implement the necessary support code for taking exceptions
to Hyp mode in AArch32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-5-peter.maydell@linaro.org
Factor out the code which changes the CPU state so as to
actually take an exception to AArch32. We're going to want
to use this for handling exception entry to Hyp mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-4-peter.maydell@linaro.org
The AArch32 HCR and HCR2 registers alias HCR_EL2
bits [31:0] and [63:32]; implement them.
Since HCR2 exists in ARMv8 but not ARMv7, we need new
regdef arrays for "we have EL3, not EL2, we're ARMv8"
and "we have EL2, we're ARMv8" to hold the definitions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-3-peter.maydell@linaro.org
Richard Henderson
Peter Maydell
Aaron Lindsay