The only client of hbitmap_serialization_granularity() is dirty-bitmap's
bdrv_dirty_bitmap_serialization_align(). Keeping the two names consistent
is worthwhile, and the shorter name is more representative of what the
function returns (the required alignment to be used for start/count of
other serialization functions, where violating the alignment causes
assertion failures).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With NOUSER=1 the container runs code as root, which may create
privileged files that will not be be accssible next time. Skip ccache
dir mount in this case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170925075458.18047-1-famz@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Report error and exit upon compiling error, otherwise the iotests output
will be pure noise.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170926110134.2786-1-famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The usual behaviour of /etc/profile is to set the default PATH for
users. This runs into problems when we have updated PATH in our
dockerfile e.g. to access a cross-compiler in a non-standard
location. It shouldn't be needed anyway as we inherit the env from the
image when it was setup.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170926133622.14991-1-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Feature "dtc" is explicitly required by test-mingw, but is not detected
by the run script since we switched to archive-source.sh in b7f404201e.
Since it isn't available in the Fedora image which runs this test on
patchew, the way we get dtc is still from submodule.
archive-source.sh takes care of bundling the submodule files already, so
what we need to do is just checking if files are there. Makefile is
chosen because it is one that is unlikely to get renamed in the future.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170925082913.22089-1-famz@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Basic test that "make install" works; this requires msgfmt so add
gettext to the packages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1506095371-23160-1-git-send-email-pbonzini@redhat.com>
[Rebase to master. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
-----BEGIN PGP SIGNATURE-----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=/+LV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging
Migration pull 2017-09-27
# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170927a:
migration: Route more error paths
migration: Route errors up through vmstate_save
migration: wire vmstate_save_state errors up to vmstate_subsection_save
migration: Check field save returns
migration: check pre_save return in vmstate_save_state
migration: pre_save return int
migration: disable auto-converge during bulk block migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZylugAAoJEH8JsnLIjy/Wp1QP/jtwre8WwtlX3SZ82cyiwonc
fODcokF6iEsX7vs9vMr8lkbwF4mjxaU2Xf/knC98J/6rCxM8DRP/MW4BZttTxDI9
++U926cIHHzjtSDalcjfTKnJD7PikHbLXz3SJ+u9hPnIeGs56hybCU6iHrrIcOTs
YSMtD3eUQ8B8JaoegKgNyqkhvfhEdHlWFCq9/T2YEWwYMzGt1jvSTRqe3vr8vIu3
v7QKvh35gm965yaUTGpv7Ej7TOBTWOaYBo9D1TBKNEZOFTBjqyldciyBoDhCF2P9
+4EsNTkZ7u20Rko41dzsZPzhjG10gm/lNZNj3Cul9ta4kQ0hGeOjEujd9L9ANTGl
gwnPPHKwgax5O+ctCPmrU7yHG+XIQD3gckC69qQeRXnPYQ4Jeo/LqhwjU+FcZfHs
97Lz6CHQHgtBP9JJwBMtUp77HJ58KPnnWIxGkb9u2vm4CpvRFkMrx5ekmj//9klX
5niRiqkNdrkEUnu/FIXOXxSmwnlhedAGQNq7ALSoW95El1QCy8Mm0eKEvmHyvZzd
z2gSufLX6ynOaG4x5oY5eezKm6F4Hxwt+w8Svj9PHXIrmrEIop11LG5MVsDGDjyh
XKiLddEIVKTYGwffX0CGTLYA34m2uHPkVVrMOIEvni3G6byXkb10+4pBpuTu/O/h
wQPFraquH1I2B5YETsMa
=7Bt2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 26 Sep 2017 14:52:32 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (24 commits)
block/qcow2-bitmap: fix use of uninitialized pointer
qemu-iotests: add shrinking image test
qcow2: add shrink image support
qcow2: add qcow2_cache_discard
qemu-img: add --shrink flag for resize
iotests: fix 181: enable postcopy-ram capability on target
qemu-iotests: Test change-backing-file command
block: Fix permissions after bdrv_reopen()
block: reopen: Queue children after their parents
block: Base permissions on rw state after reopen
block: Add reopen queue to bdrv_check_perm()
block: Add reopen_queue to bdrv_child_perm()
qemu-io: Drop write permissions before read-only reopen
block: Clean up some bad code in the vvfat driver
block/throttle-groups.c: allocate RestartData on the heap
throttle: Assert that bkt->max is valid in throttle_compute_wait()
iotests: Print full path of bad output if mismatch
iotests: use virtio aliases for 067
iotests: use -ccw on s390x for 051
iotests: use -ccw on s390x for 040, 139, and 182
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-5-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The flag is additional precaution against data loss. Perhaps in the future the
operation shrink without this flag will be blocked for all formats, but for now
we need to maintain compatibility with raw.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-2-pbutsykin@virtuozzo.com
[mreitz: Added a missing space to a warning]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Migration capabilities should be enabled on both source and
destination qemu processes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This involves a temporary read-write reopen if the backing file link in
the middle of a backing file chain should be changed and is therefore a
good test for the latest bdrv_reopen() vs. op blockers fixes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io provides a 'reopen' command that allows switching from writable
to read-only access. We need to make sure that we don't try to keep
write permissions to a BlockBackend that becomes read-only, otherwise
things are going to fail.
This requires a bdrv_drain() call because otherwise in-flight AIO
write requests could issue new internal requests while the permission
has already gone away, which would cause assertion failures. Draining
the queue doesn't break AIO requests in any new way, bdrv_reopen() would
drain it anyway only a few lines later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x.
Using virtio-scsi will implicitly pick the right device, so just
switch to that for simplicity.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x, so use the -ccw instead of the -pci versions of virtio
devices on s390x.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x, so use the -ccw instead of the -pci versions of virtio
devices on s390x.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A basic set of qemu options is initialised in ./common:
export QEMU_OPTIONS="-nodefaults -machine accel=qtest"
However, two test cases (172 and 186) overwrite QEMU_OPTIONS and neglect
to manually set '-machine accel=qtest'. Add the missing option for 172.
186 probably only copied the code from 172, it doesn't actually need to
overwrite QEMU_OPTIONS, so remove that in 186.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
If QEMU has been compiled with the flags --enable-tcg-interpreter and
--enable-debug, the guest is running incredibly slow. The pxe boot test
can take up to 400 seconds when testing the pseries ppc64 machine. While
we should still look for ways to speed up the test on the pseries machine,
it's better to increase the timeout in this test to 600 seconds anyway to
allow the test to pass successfully now with this unusal configuration
already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The image is prepared following instructions as in:
https://wiki.qemu.org/Hosts/BSD
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
The image is prepared following instructions as in:
https://wiki.qemu.org/Hosts/BSD
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is the common code to implement a "VM test" to
1) Download and initialize a pre-defined VM that has necessary
dependencies to build QEMU and SSH access.
2) Archive $SRC_PATH to a .tar file.
3) Boot the VM, and pass the source tar file to the guest.
4) SSH into the VM, untar the source tarball, build from the source.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Some by default blocked syscalls are required to run tests for example
userfaultfd.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170905025614.579-4-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: 20170905021201.25684-1-famz@redhat.com
They both print a message and exit, but with different status code so
distinguish real test errors from env preparation failures.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170905025614.579-3-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: 20170905021201.25684-1-famz@redhat.com
Without "set -e", the "&&" makes sure that the return code reflects the
result status, and that make only runs if configure succeeds.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170905025614.579-2-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: 20170905021201.25684-1-famz@redhat.com
The 'run' script already creats src, build and install directories under
$TEST_DIR, use it in common.rc.
Also the tests always run from $QEMU_SRC/tests/docker, so use a relative
$CMD string.
Message-Id: <20170817035721.11064-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Base on the newer ubuntu-lts (16.06) and include more packages for
better build coverage.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907141245.31946-2-famz@redhat.com>
Set the DEBIAN_FRONTEND and locale env vars to stop apt complaining so
much as we build the image.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170725133425.436-7-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Installing the device-tree-compiler build-deps is a little extreme. We
only actually need the binary so include it with the other packages.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170725133425.436-6-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
If you invoke with NOCACHE=1 we pass --no-cache in the argv to
docker.py but may still not force a rebuild if the dockerfile checksum
hasn't changed. By testing for its presence we can force builds
without having to manually remove the docker image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170725133425.436-5-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
While adding the current user is a useful default behaviour for
creating new images it is not appropriate for Travis which already has
a default user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170725133425.436-2-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
We can use the drive_del test on s390x, too, to check that adding and
deleting also works fine with the virtio-ccw bus. But we have to make
sure that we use the devices with the "-ccw" suffix instead of the
"-pci" suffix for the virtio-ccw transport on s390x. Introduce a helper
function called qvirtio_get_dev_type() that returns the correct string
for the current architecture.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1504190408-11143-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The pixman submodule does not exist anymore, and its removal broke
docker-based tests. Fix it.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert any remaining uses of fprintf(stderr, "warning:"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i 's|fprintf(.*".*warning[,:] |warn_report("|Ig' {} +
The #include lines and chagnes to the test Makefile were manually
updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <2c94ac3bb116cc6b8ebbcd66a254920a69665515.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes
result in circular dependencies. To avoid these issues let's just
combine both into a single library that functions as both.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test provides its own mocks, so do not use the "standard"
stubs in libqemustub.a or the event loop implementation in
libqemuutil.a.
This is required on OS X, which otherwise brings in qemu-timer.o,
async.o and main-loop.o from libqemuutil.a.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
