qemu-iotests 063 left t.raw.raw1 behind in the scratch directory because
it used the wrong suffix. Make sure to clean it up after completing the
test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 162 left qemu-nbd.pid behind in the scratch directory, and
potentially a file called '42' in the current directory. Make sure to
clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 153 left t.qcow2.c behind in the scratch directory. Make
sure to clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 141 attempted to use brace expansion to remove all images
with a single command. However, for this to work, the braces shouldn't
be quoted.
With this fix, the tests correctly cleans up its scratch images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 074 and 179 left a blkdebug.conf behind in the scratch
directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 041 left quorum_snapshot.img and target.img behind in the
scratch directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new test 190 ensures we don't regress back to an infinite loop when
measuring the size of a 2T+ qcow2 image. I did not append to test 178,
because that test is also designed to run with format 'raw'; also, this
gives us some coverage of the measure command under the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We had a bug for multiple releases where dirty-bitmap count was
documented in bytes but reported in sectors; enhance the testsuite
to add coverage of DirtyBitmapInfo to ensure we do not regress again.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without redirecting qemu's stderr to stdout, _filter_qemu will not apply
to warnings. This results in $QEMU_PROG not being replaced by QEMU_PROG
which is not great if your qemu executable is not called
qemu-system-x86_64 (e.g. qemu-system-i386).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On one hand, the _make_test_img invocation for creating the target image
was missing a -u because its backing file is not supposed to exist at
that point.
On the other hand, nobody noticed probably because the backing file is
created later on and _cleanup failed to remove it: The quotation marks
were misplaced so bash tried to delete a file literally called
"$TEST_IMG{,.target}..." instead of performing brace expansion. Thus, the
files stayed around after the first run and qemu-img create did not
complain about a missing backing file on any run but the first.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allow a one liner from fresh repository clone, i.e.:
./configure && make -j check-qtest-aarch64
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If slirp is disabled, it will fail with:
qemu-system-x86_64: -netdev user,id=qtest-bn0: Parameter 'type' expects a netdev backend type
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
user_creatable_add_opts() returns a reference (the other reference is
for the root parent/child link).
Leak introduced in commit a1af255f06.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commits 70f17a1 ('error: Revert unwanted change of warning messages')
and e1824e5 ('qemu-iotests: Test 'info block'') had a semantic merge
conflict, which results in failure for qemu-iotests case 186. Fix the
reference output to consider the changes of 70f17a1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1500973176-29235-1-git-send-email-kwolf@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test cases 030, 041 and 055 used to sleep for a second after calling
block-job-pause to make sure that the block job had time to actually
get into paused state. We can instead poll its status and use that one
second only as a timeout.
The tests also slept a second for checking that the block jobs don't
make progress while being paused. Half a second is more than enough for
this.
These changes reduce the total time for the three tests by 25 seconds on
my laptop (from 155 seconds to 130).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
A run of './check -qcow2 -g quick' on my machine produced only
two tests that took longer than 5 seconds; 178 took 18, and
189 took 7. Remove them from the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name). BlockdevRef
value "" is special: "no block device should be referenced." It's
actually interpreted that way in just one place: optional member
@backing of COW formats. Semantics:
* Present means "use this block device" as backing storage
* Absent means "default to the one stored in the image"
* Except "" means "don't use backing storage at all"
The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is not a value block device ID.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist. I also find it
ugly.
To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing. This commit implements
the latter: add JSON null to the values of @backing, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null. Works, because BlockdevRef
occurs only within arguments of blockdev-add. The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null. Add a TODO comment for
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
test_visitor_in_alternate() tests UserDefAlternate with inadmissible
input. test_visitor_in_fail_alternate() does basically the same.
Drop the former, keep the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
I expect the 'null' type to be useful mostly for members of alternate
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make visit_type_null() take an @obj argument like its buddies. This
helps keep the next commit simple.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Tweaks from Paolo for J=x Travis compiles
Bunch of updated cross-compile targets from Philippe
Additional debug tools in travis image from Me
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZbdw6AAoJEPvQ2wlanipEd3UH/0z2oPZanlGonjPtmS2DjLmU
xvf5EgCNYE0VwBYqycSeXd5pVSVtfkAXi9EBIBzF64FjySV131k3T9iUGVnMHC8w
RzwSk/6FDldUhJWIeXRsMC1zwJuOyhe2PTZ228zmeCr+gMJ8v5znfWFG7bt7xPxm
ACfDxA+bWfwyfObmWWBGiqemTAnPYK9eZLoTFWKp7fjSlnhR+Vwl4nksdAs0P/sm
BOZ2QO8AqRd8z8vV7r+DKYmxLltLHGds8Bq1UOfPcoCqGlEcX8enWUG7lLPS530c
41RRGlWPEiTgat0PBAembxShCHHltY8jPr7C7hcwo42GIWIL97LxApM6K4FXcAQ=
=Pk5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2' into staging
Final CI updates for soft-freeze
Tweaks from Paolo for J=x Travis compiles
Bunch of updated cross-compile targets from Philippe
Additional debug tools in travis image from Me
# gpg: Signature made Tue 18 Jul 2017 11:00:26 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2: (32 commits)
docker: install clang since Shippable setup_ve() verify it is available
docker: warn users to use newer debian8/debian9 base image
docker: add debian Ports base image
shippable: add win32/64 targets
docker: add MXE (M cross environment) base image for MinGW-w64
shippable: add mips64el targets
docker: add debian/mips64el image
shippable: use debian/mips[eb] targets
docker: add debian/mips[eb] images
shippable: add powerpc target
docker: add debian/powerpc based on Jessie
docker: add 'apt-fake' script which generate fake debian packages
docker: add qemu:debian-jessie based on outdated jessie release
shippable: add x86_64 targets
shippable: add ppc64el targets
shippable: add armel targets
docker: enable nettle to extend code coverage on arm64
docker: enable gcrypt to extend code coverage on amd64
docker: enable netmap to extend code coverage on amd64
docker: enable virgl to extend code coverage on amd64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In various places in our test makefiles and scripts we use the
shell $RANDOM to create a random number. This is a bash
specific extension, and doesn't work on other shells.
With dash the shell doesn't complain, it just effectively
always evaluates $RANDOM to 0:
echo $((RANDOM + 32768)) => 32768
However, on NetBSD the shell will complain:
"-sh: arith: syntax error: "RANDOM + 32768"
which means that "make check" fails.
Switch to using "${RANDOM:-0}" instead of $RANDOM,
which will portably either give us a random number or zero.
This means that on non-bash shells we don't get such
good test coverage via the MALLOC_PERTURB_ setting, but
we were already in that situation for non-bash shells.
Our only other uses of $RANDOM (in tests/qemu-iotests/check
and tests/qemu-iotests/162) are in shell scripts which use
a #!/bin/bash line so they are always run under bash.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1500029117-6387-1-git-send-email-peter.maydell@linaro.org
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
glibc used to have:
typedef struct ucontext { ... } ucontext_t;
glibc now has:
typedef struct ucontext_t { ... } ucontext_t;
(See https://sourceware.org/bugzilla/show_bug.cgi?id=21457
for detail and rationale for the glibc change)
However, QEMU used "struct ucontext" in declarations. This is a
private name and compatibility cannot be guaranteed. Switch to
only using the standardized type name.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Message-id: 20170628204452.41230-1-raj.khem@gmail.com
Cc: Kamil Rytarowski <kamil@netbsd.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: Rewrote commit message, based mostly on the one from
Nathaniel McCallum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=2c6k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 18 Jul 2017 14:29:59 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (21 commits)
qemu-img: Check for backing image if specified during create
blockdev: move BDRV_O_NO_BACKING option forward
block/vvfat: Fix compiler warning with gcc 7
vvfat: initialize memory after allocating it
vvfat: correctly parse non-ASCII short and long file names
vvfat: add a constant for bootsector name
vvfat: add constants for special values of name[0]
qemu-iotests: Test unplug of -device without drive
qemu-iotests: Test 'info block'
scsi-disk: bdrv_attach_dev() for empty CD-ROM
ide: bdrv_attach_dev() for empty CD-ROM
block: List anonymous device BBs in query-block
block/qapi: Use blk_all_next() for query-block
block: Make blk_all_next() public
block/qapi: Add qdev device name to query-block
block: Make blk_get_attached_dev_id() public
block/vpc.c: Handle write failures in get_image_offset()
block/vmdk: Report failures in vmdk_read_cid()
block: remove timer canceling in throttle_config()
block: add clock_type field to ThrottleGroup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add a hmac speed benchmark, it helps us to
measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-hmac" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch add a hash speed benchmark, it helps us to
measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-hash" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now we have two qcrypto backends, libiary-backend and afalg-backend,
but which one is faster? This patch add a cipher speed benchmark, it
helps us to measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-cipher" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The migration tests used two VMs each with -m 1024 this caused
problems when run in some small, pessimistic test VMs (netbsd).
We can just be meaner with the amount of RAM in the test and use -m 384
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20170714152820.24034-1-dgilbert@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Vt6Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-07-17
# gpg: Signature made Mon 17 Jul 2017 19:46:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
qmp: Include parent type on 'qom-list-types' output
qmp: Include 'abstract' field on 'qom-list-types' output
tests: Simplify abstract-interfaces check with a helper
i386: add Skylake-Server cpu model
i386: Update comment about XSAVES on Skylake-Client
i386: expose "TCGTCGTCGTCG" in the 0x40000000 CPUID leaf
fw_cfg: move QOM type defines and fw_cfg types into fw_cfg.h
fw_cfg: move qdev_init_nofail() from fw_cfg_init1() to callers
fw_cfg: switch fw_cfg_find() to locate the fw_cfg device by type rather than path
qom: Fix ambiguous path detection when ambiguous=NULL
Revert "machine: Convert abstract typename on compat_props to subclass names"
test-qdev-global-props: Test global property ordering
qdev: fix the order compat and global properties are applied
tests: Test case for object_resolve_path*()
device-crash-test: Fix regexp on whitelist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.
It may not always be possible, as in the existing case when a filesize
for the new image was not specified.
This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.
Sorry for the heinous looking diffstat, but it's mostly whitespace.
Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This caused an assertion failure until recently because the BlockBackend
would be detached on unplug, but was in fact never attached in the first
place. Add a regression test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This test makes sure that all block devices show up on 'info block',
with all of the expected information, in different configurations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
With -blockdev/-device, users can indirectly create anonymous
BlockBackends, while the state of such backends is still of interest. As
a preparation for making such BBs visible in query-block, make sure that
they can be identified even without a name by adding the ID/QOM path of
their qdev device to BlockInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* new command: qemu-get-osinfo
* build fix for OpenBSD
* better error-reporting for failure on keyfile dump
* remove redundant initialization of qa_state global
* include libpcre in w32 package
* w32 localization fixes for service installation/registration
v2:
* fix build issue with older GCCs introduced with guest_get_osinfo
* relocated some declarations in guest_get_osinfo
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZbeh9AAoJEDNTyc7xCLWE3hgH/2n5tn4kqkZ4fNLWiXRQgzmC
Sp6lXMS1iqRwAQTWcI0+C74k6rP9ByytzxYv6UmmdpTUGmk+v26xMaJlV4LysDWx
8ilOd75s4Fmu+pWOaJTXrA8bWKEeoq7RPhl5samtY1u27v2QbCWdqViwhjzbxzNJ
QmomyOkUAKdEpC70XBtEbkSyKqB4aM6nPzlTli8m3/0CNXmtwBmq7g9VPV1alLxp
U567tJu0IQKuu8WsqMTPUQTHQ8ATvl0NLaF5Mpux1/B/FBui1v/9swNXPnbD9YXg
+ZWxjtCep9PWq3WVylU9O2tikttxMW2vXdgB2lYM1agjQZEX+AXOj8WzhF9d4bw=
=UFcD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2017-07-17-v2-tag' into staging
qemu-ga patch queue
* new command: qemu-get-osinfo
* build fix for OpenBSD
* better error-reporting for failure on keyfile dump
* remove redundant initialization of qa_state global
* include libpcre in w32 package
* w32 localization fixes for service installation/registration
v2:
* fix build issue with older GCCs introduced with guest_get_osinfo
* relocated some declarations in guest_get_osinfo
# gpg: Signature made Tue 18 Jul 2017 11:52:45 BST
# gpg: using RSA key 0x3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2017-07-17-v2-tag:
test-qga: add test for guest-get-osinfo
test-qga: pass environemnt to qemu-ga
qemu-ga: add guest-get-osinfo command
qga: report error on keyfile dump error
qga-win32: remove a redundancy code
qemu-ga: check if utmpx.h is available on the system
qemu-ga: add missing libpcre to MSI build
qga-win: fix installation on localized windows
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add test for guest-get-osinfo command.
Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If
the variable is defined it is interpreted as path to the os-release file
and it is parsed instead of the default paths.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* move declarations to beginning of functions
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: split from merged patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By itself this doesn't add much to our coverage. However later patches
will extend this image to include more bleeding edge libraries which
are not yet widely available in distros.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We'll also want to support some older Debian combinations for
architectures that didn't make the Debian 9 cut.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When a test fails/hangs you don't want the hassle of getting the debug
tools installed. Lets install them on our image by default so we can
debug when we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Although the upstream Travis images don't need this library our
"travis-lite" scripts are written in python. This allows us to do:
make docker-travis@travis J=10
and approximate a travis run on their default image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is useful so that we can do builds at higher than -j3 when running
travis.py locally.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 8ecaeae8 changed the way the client requests an NBD export,
and in the process also changed the resulting error message when
the export is not present, breaking a couple of iotests. The error
message is now directly given by the server (a failed NBD_OPT_GO)
instead of implied by the client (after exhausting NBD_OPT_LIST),
but looking at the testsuite changes, it proves worthwhile to
reword the error message to be slightly less verbose (as this is
one particular error message likely to be hit by a user).
Note that the error message is now sensitive to which binary is
running the server as well as the client (since the expected
output is replaying a message received from the server - for that
matter, it depends on a server new enough to understand NBD_OPT_GO);
in general iotests are run on client and server from the same source
code base so the default setup will pass; but if it proves
problematic for people overriding QEMU_PROG, QEMU_IMG_PROG,
QEMU_IO_PROG, and QEMU_NBD_PROG to point across multiple builds for
cross-version integration testing, we may have to later tweak or
sanitize the output somehow.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717142310.17048-1-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Include name of parent type of each type on 'qom-list-types' output.
Without this, there's no way to figure out the parents of a given type
without making additional 'qom-list-types' queries.
In addition to the test case for the new feature, update the
abstract-interface test case to use the new field and avoid the
"qom-list-types implements=object" trick.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A client may be interested in getting the list of both abstract and
non-abstract types. Instead of requiring them to make multiple queries
with different filter arguments, just return an 'abstract' field in
'qom-list-types'.
In addition to the new test code for validating this field, update the
abstract-interfaces test case to query for all 'interface' subtypes
(including abstract ones), and to look at the 'abstract' field directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new type_list_find() helper to device-introspect-test.c, to
simplify the code at test_abstract_interfaces().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
object_resolve_path*() ambiguous path detection breaks when
ambiguous==NULL and the object tree have 3 objects of the same type and
only 2 of them are under the same parent. e.g.:
/container/obj1 (TYPE_FOO)
/container/obj2 (TYPE_FOO)
/obj2 (TYPE_FOO)
With the above tree, object_resolve_path_type("", TYPE_FOO, NULL) will
incorrectly return /obj2, because the search inside "/container" will
return NULL, and the match at "/obj2" won't be detected as ambiguous.
Fix that by always calling object_resolve_partial_path() with a non-NULL
ambiguous parameter.
Test case included.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707213052.13087-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Test case to detect the bug fixed by commit
"qdev: fix the order compat and global properties are applied".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170711004303.3902-3-ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Test for partial path lookup using object_resolve_path*().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707213052.13087-2-ehabkost@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Every vCPU now uses a separate set of TBs for each set of dynamic
tracing event state values. Each set of TBs can be used by any number of
vCPUs to maximize TB reuse when vCPUs have the same tracing state.
This feature is later used by tracetool to optimize tracing of guest
code events.
The maximum number of TB sets is defined as 2^E, where E is the number
of events that have the 'vcpu' property (their state is stored in
CPUState->trace_dstate).
For this to work, a change on the dynamic tracing state of a vCPU will
force it to flush its virtual TB cache (which is only indexed by
address), and fall back to the physical TB cache (which now contains the
vCPU's dynamic tracing state as part of the hashing function).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915775266.6295.10060144081246467690.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A few error handlings are missing because we ignore the subprocess exit
code, for example "docker build" errors are currently ignored.
Introduce _do_check() aside the existing _do() method and use it in a
few places.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-3-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The **kwargs can do this just well.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
When trying to debug problems with tests it is natural to set
DEBUG=1 when starting the docker environment. Unfortunately
this has a side-effect of enabling an eth0 network interface
in the container, which changes the operating environment of
the test suite. IOW tests with fail may suddenly start
working again if DEBUG=1 is set, due to changed network setup.
Add a separate NETWORK variable to allow enablement of
networking separately from DEBUG=1. This can be used in two
ways. To enable the default docker network backend
make docker-test-build@fedora NETWORK=1
while to enable a specific network backend, eg join the network
associated with the container 'wibble':
make docker-test-build@fedora NETWORK=container:wibble
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170713144352.2212-1-berrange@redhat.com>
[Drop the superfluous second $(subst ...). - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
There's no requirement for RSDP to be installed last
by the firmware, so in rare cases vmgen id test hits
a race: RSDP is there but VM GEN ID isn't.
To fix, switch to common boot sector infrastructure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Message-id: 1500046217-24597-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-file
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-9-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
makes it possible to test the existing chardev-udp
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-8-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this is only not a problem if the test is last in a suite,
otherwise it makes the following main_loop() calls to fail
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-7-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests produce format-dependent output. Either the difference is
filtered out and ignored, or the test case is format-specific so we
don't need to worry about per-format output differences.
There is a third case: the test script is the same for all image formats
and the format-dependent output is relevant. An ugly workaround is to
copy-paste the test into multiple per-format test cases. This
duplicates code and is not maintainable.
This patch allows test cases to add per-format golden output files so a
single test case can work correctly when format-dependent output must be
checked:
123.out.qcow2
123.out.raw
123.out.vmdk
...
This naming scheme is not composable with 123.out.nocache or 123.pc.out,
two other scenarios where output files are split. I don't think it
matters since few test cases need these features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-9-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A user may specify a relative path for accessing qemu, qemu-img, etc.
through environment variables ($QEMU_PROG and friends) or a symlink.
If a test decides to change its working directory, relative paths will
cease to work, however. Work around this by making all of the paths to
programs that should undergo testing absolute. Besides "realpath", we
also have to use "type -p" to support programs in $PATH.
As a side effect, this fixes specifying these programs as symlinks for
out-of-tree builds: Before, you would have to create two symlinks, one
in the build and one in the source tree (the first one for common.config
to find, the second one for the iotest to use). Now it is sufficient to
create one in the build tree because common.config will resolve it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for sha224, sha512, sha384 and ripemd160 hash
algorithms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default the PBKDF algorithm used with LUKS is tuned
based on the number of iterations to produce 1 second
of running time. This makes running the I/O test with
the LUKS format orders of magnitude slower than with
qcow2/raw formats.
When creating LUKS images, set the iteration time to
a 10ms to reduce the time overhead for LUKS, since
security does not matter in I/O tests.
Previously a full 'check -luks' would take
$ time ./check -luks
Passed all 22 tests
real 23m9.988s
user 21m46.223s
sys 0m22.841s
Now it takes
$ time ./check -luks
Passed all 22 tests
real 4m39.235s
user 3m29.590s
sys 0m24.234s
Still slow compared to qcow2/raw, but much improved
none the less.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the qemu-img dd command does accept --image-opts
this is not sufficient to make it work with the LUKS
image yet. This is because bdrv_create() still always
requires the non-image-opts syntax.
Thus we must skip 159/170 with luks for now
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test that hbitmap iter is resistant to bitmap resetting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 181 only works for formats which support live migration (naturally,
as it is a live migration test). Disable it for all formats which do
not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170621131157.16584-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 138 and 158 iotests exercise the legacy qcow2 aes encryption
code path and they work fine with qcow v1 too.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-16-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This extends the 087 iotest to cover LUKS encryption when doing
blockdev-add.
Two further tests are added to validate read/write of LUKS
encrypted images with a single file and with a backing file.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-15-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 048 is designed to verify data preservation during an
image resize. The qcow (v1) format impl has never supported
resize so always fails.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 042 is designed to verify operation with zero sized images.
Such images are not supported with qcow (v1), so this test has
always failed.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that *file is valid if the return is not an error and
includes BDRV_BLOCK_OFFSET_VALID, but forgot to obey this contract
when a driver (such as blkdebug) lacks a callback. Messed up in
commit 67a0fd2 (v2.6), when we added the file parameter.
Enhance qemu-iotest 177 to cover this, using a sequence that would
print garbage or even SEGV, because it was dererefencing through
uninitialized memory. [The resulting test output shows that we
have less-than-ideal block status from the blkdebug driver, but
that's a separate fix coming up soon.]
Setting *file on all paths that return BDRV_BLOCK_OFFSET_VALID is
enough to fix the crash, but we can go one step further: always
setting *file, even on error, means that a broken caller that
blindly dereferences file without checking for error is now more
likely to get a reliable SEGV instead of randomly acting on garbage,
making it easier to diagnose such buggy callers. Adding an
assertion that file is set where expected doesn't hurt either.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In QEMU's main_loop() we used to check whether we should do
a nonblocking call to main_loop(); this was deleted in commit e330c118f2,
because now that vCPUs always drop the I/O thread lock it is an unnecessary
optimization.
The loop in test-char.c copied the old QEMU main_loop() code, but
here the nonblocking check has never been necessary because this
standalone test case doesn't hold the I/O lock anyway. Remove it,
so we can drop the main_loop_wait() return value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1498584769-12439-2-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We dropped some dead code, update extected table binaries.
Fixes: 4d7e7f2702 ("hw/acpi: remove dead acpi code")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following tests are implemented:
* test that a GUID passed in by command line is propagated to the guest.
Read the GUID from guest memory
* test that the "auto" argument to the GUID generates a valid GUID, as
seen by the guest.
* test that a GUID passed in can be queried from the monitor
This patch is loosely based on a previous patch from:
Gal Hammer <ghammer@redhat.com> and Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJZVlttEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaSJQf/
aKBxpeES6l4zYoa09+x7eJwjQXj6RdIpUNL5N4a/dhUsVJ2keWo6lPcjC/kcbwPR
TJ4zYplm+suVzbNZG4XJGXLryo6ODIaHhpa/Ctsf3i6vQkRipxManpTbqqnyjt/e
fAnwdFu0dFKbnqJECujDQgaZo1qWLuyZP++ZFt2kiZgOX/OdHpnQPH2U4l+22Cp6
LB2FAFv0TwDjxmzM6EuOjsuLr9Rq3ckx7CVoyCnZuWkcaqn3/2cXhdNDErUB1nl7
Pa/N3khz6PJs1Q8/H3GPH+BJHfORLRFR6dZ/eD8JU6qqBJfguvkSmi9cQUlbVsko
KEBqUmL+bKJaK257lkUkfg==
=wO2z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-pull-request' into staging
# gpg: Signature made Fri 30 Jun 2017 15:08:45 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-pull-request:
block: Exploit BDRV_BLOCK_EOF for larger zero blocks
block: Add BDRV_BLOCK_EOF to bdrv_get_block_status()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new used ring APIs instead of assuming ISR being set means the
request has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Existing tests do not touch the virtqueue used ring. Instead they poll
the virtqueue ISR register and peek into their request's device-specific
status field.
It turns out that the virtqueue ISR register can be set to 1 more than
once for a single notification (see commit
83d768b564 "virtio: set ISR on dataplane
notifications"). This causes problems for tests that assume a 1:1
correspondence between the ISR being 1 and request completion.
Peeking at device-specific status fields is also problematic if the
device has no field that can be abused for EINPROGRESS polling
semantics. This is the case if all the field's values may be set by the
device; there's no magic constant left for polling.
It's time to process the used ring for completed requests, just like a
real virtio guest driver. This patch adds the necessary APIs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
Perform the savevm/loadvm test with both iothread on and off. This
covers the recently found savevm/loadvm hang when iothread is enabled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The legacy -hda option does not support -drive/-device parameters. They
will be required by the next patch that extends this test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu is exited, all running jobs should be cancelled successfully.
This adds a test for this for all types of block jobs that currently
exist in qemu.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
After _cleanup_qemu(), test cases should be able to start the next qemu
process and call _cleanup_qemu() for that one as well. For this to work
cleanly, we need to improve the cleanup so that the second invocation
doesn't try to kill the qemu instances from the first invocation a
second time (which would result in error messages).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We add the following cross-compile targets:
- mipsel-softmmu,mipsel-linux-user,mips64el-linux-user
- armeb-linux-user
While I was rolling I discovered we could also back out a bunch of the
emdebian hacks as the newly released stretch handles cross compilers
as first class citizens. Unfortunately this also meant I had to drop
the powerpc support as that is no longer in Debian stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZSn4uAAoJEPvQ2wlanipE8+wH/jdr1A3AUrxvQh5PNivAxKr7
FnDBNl41egWqmGSjE+pjJ5lZIVozg5cs8/WZnrOKcjnBk+eCitWI8cbE1nvJRMRL
71MVdy4bYgNCX1iVSbl/OmZqMdunmIrQXb9YxdIkbOOjAIFAacd16xorRcgtOPS/
/3H1zkBOnn16tHjGpQENBZQK3h0Rh5pKGQg8cG5d81i/38DTIlDO2vdgs0Hb7yHK
WZwrlQctkb6MvPTp0vvNj17Z0KYeLqXBKxvKVNEmLoqSt4e1Tocz9kukWyPInocY
u575XM3haUSuPqUD8EO1db4G52iWsOIz4M4S/1Rzr6/W4QWGXScvUauEJDZGvNA=
=g+BN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-210617-2' into staging
This is mostly Philippe's updates
We add the following cross-compile targets:
- mipsel-softmmu,mipsel-linux-user,mips64el-linux-user
- armeb-linux-user
While I was rolling I discovered we could also back out a bunch of the
emdebian hacks as the newly released stretch handles cross compilers
as first class citizens. Unfortunately this also meant I had to drop
the powerpc support as that is no longer in Debian stable.
# gpg: Signature made Wed 21 Jun 2017 15:09:50 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-ci-updates-210617-2: (21 commits)
MAINTAINERS: self-appoint me as reviewer in build/test automation
MAINTAINERS: add Shippable automation platform URL
shippable: add mipsel target
shippable: add armeb-linux-user target
shippable: be verbose while building docker images
shippable: do not initialize submodules automatically
shippable: build using all available cpus
shippable: use C locale to simplify console output
docker: add mipsel build target
docker: add extra libs to s390x target to extend codebase coverage
docker: add extra libs to arm64 target to extend codebase coverage
docker: add extra libs to armhf target to extend codebase coverage
docker: use eatmydata in debian arm64 image
docker: use eatmydata in debian armhf image
docker: use eatmydata, install common build packages in base image
docker: use better regex to generate deb-src entries
docker: install ca-certificates package in base image
docker: rebuild image if 'extra files' checksum does not match
docker: add --include-files argument to 'build' command
docker: let _copy_with_mkdir() sub_path argument be optional
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZSRWrAAoJEDhwtADrkYZTVOQP/RK8br2A1Cn7LeVG6jnKz5hJ
OqyII77x8I2RachWvnwxQeHPMEVDuz3y2WjL+80s6peXlpR6y/13w7oX0f6aiJuo
+T9khTqMv2I7HsM5UCsXAJpFPHT7r90b4x8nstY80YLGe7lA7L6yk6PGyCxHThwA
mOiTKDw6/Xb/yZGrS2Favrun7juNpAs0Ec1IAkaA8xsEgVkd6tDv281rmHqvibl/
//90VfJp3nHFZ12FCQ1HzA42Eigtmo/fIk9LnAzBoYG0zw0cnzjuv0BNzs/JwuUZ
/VskeD1cViQ4yzFnPpjOavjYjTN854/JTJzm7gZ7dTQ6/l3ykoY6NDE8p1BLuHlC
p2RKkg20EeZlpOEtMQ4g6iyG6EUxaKcEiXmQ31LqN/LJwxTYbo5B5nCHMjrt4gxe
MqFBJQSNsJ7QjZ7Qa7pADMCi/G0m7/0dN8vBqSr4vcbLVvdbw/yb/9s33wXGrUj1
PyXM2ymi+vvSqcXtNXKshsJLxJSJxO1tm2tRIANDTabQ00yxs8dOYnQnbQFR94fp
6nrE2PnjZqgqk69aNDJEbngj6Tgx44nyTr1+Q17juZf9nTCE5QmBE1J0IRoykCJn
E8+T63ZxtIxVV2yLi5xBjmZaZtPyJRGGeUXunA10SuWrHzupEcBuhFhFYd2MFM5L
fsojALN2K3Gdx2+CmAo2
=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The common build packages are: build-essential clang git bison flex
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixups following stretch update]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixed up following dropping emdebian]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Debian has now released Stretch as its new stable. As we track
debian:stable-slim this has a few consequences. For one thing we can
now drop the emdebian hacks as cross compilers are part of the
official repositories now. However we do loose the ability to build
against powerpc (not ppc64) since that is no longer a release
architecture.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Version: GnuPG v2
iQEtBAABCAAXBQJZQyPmEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaWrgf/
SCAHpi4gzWbr7AN03jP16Qy/kqNik6F7LTNSqrRbvBPb3TNchDd4z44SAghK5m/r
+IlYQc20sBZ60tRHIHAUSF2WNcea2pj1v3ZVgjrI7hiJ3DXPiqqt/dAR/W/BLIDO
tAHAVF6Pnrjm9DC4d2zATLDHvcHMzWOsnePh7XcOm44REbwUr3GDg6bf2+j+5yfS
9ewmXfh8z4w1IvSn+f5B+IeCvGvJNA1D55dqcGo8Ivlg9PnElziXFaXO2s7UiLIM
mF3eTSIbJQNNN+E+0lpRpnqQiq+Txxggu61Q4f8bOTBhEOPa3etj1ydnXMVbvX25
6SUuBfGh51tyOIZOJz3GtA==
=9b+J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging
# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
block: make accounting thread-safe
block: split BlockAcctStats creation and setup
block: introduce block_account_one_io
block: protect modification of dirty bitmaps with a mutex
migration/block: reset dirty bitmap before reading
block: introduce dirty_bitmap_mutex
block: protect tracked_requests and flush_queue with reqs_lock
block: access write_gen with atomics
block: use Stat64 for wr_highest_offset
util: add stats64 module
throttle-groups: protect throttled requests with a CoMutex
throttle-groups: do not use qemu_co_enter_next
throttle-groups: only start one coroutine from drained_begin
block: access io_plugged with atomic ops
block: access wakeup with atomic ops
block: access serialising_in_flight with atomic ops
block: access io_limits_disabled with atomic ops
block: access quiesce_counter with atomic ops
block: access copy_on_read with atomic ops
docker: Add flex and bison to centos6 image
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to use QNum/uint where appropriate to remove i64 limitation.
The input visitor will cast i64 input to u64 for compatibility
reasons (existing json QMP client already use negative i64 for large
u64, and expect an implicit cast in qemu).
Note: before the patch, uint64_t values above INT64_MAX are sent over
json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the
patch, they are sent unmodified. Clearly a bug fix, but we have to
consider compatibility issues anyway. libvirt should cope fine,
because its parsing of unsigned integers accepts negative values
modulo 2^64. There's hope that other clients will, too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com>
[check_native_list() tweaked for consistency with signed case]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Switch strtoll() usage to qemu_strtoi64() helper while at it.
Add a few tests for large numbers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-11-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In order to store integer values between INT64_MAX and UINT64_MAX, add
a uint64_t internal representation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The tests aren't really useful, or already covered by other simple tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before the previous commit, parameter promote_int = true made
visit_start_alternate() with an input visitor avoid QTYPE_QINT
variants and create QTYPE_QFLOAT variants instead. This was used
where QTYPE_QINT variants were invalid.
The previous commit fused QTYPE_QINT with QTYPE_QFLOAT, rendering
promote_int useless and unused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Alternates with both a 'number' and an 'int' branch will become
invalid when the next patch merges of QFloat and QInt into QNum.
More sophisticated alternate code could keep them valid, but since
we have no users outside tests, simply drop the tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These checks verify that the guest RAM turns from read-write to
"blackhole" when crossing the low boundary of the TSEG. Both the standard
1MB/2MB/8MB TSEG sizes and an extended (16MB) TSEG size are tested.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A test program can start up QEMU several times, with different command
lines. For such cases, qtest_start() and qtest_end() are called from
within the individual test functions. Examples: "virtio-console-test.c",
"numa-test.c", and many others.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently there are warnings about flex and bison being missing when
building in the centos6 image:
make[1]: flex: Command not found
BISON dtc-parser.tab.c
make[1]: bison: Command not found
Add them.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170524005206.31916-1-famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
It is used by qemu-iotests.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-3-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We've used --add-current-user to create a user in the image, use it to
run tests, because root has too much priviledge, and can surprise test
cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This ensures that the request is unref'ed properly, and avoids a
segmentation fault in the new qtest testcase that is added.
This is CVE-2017-9503.
Reported-by: Zhangyanyu <zyy4013@stu.ouc.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZOZ+4AAoJECgfDbjSjVRpToYH/1vHgbv2dLtZTJm3BdBRKYWS
9oWt4drT9TdbzYL6u3zxQd6oT0FPLXKkx3ruhBtfc3GoEGO2UWGgJLEXWCLSH/pK
71iKgCB9Yr4IErjI569/fyeKS48wFEsZihzj+iQBns7gQGTbUO/GewaWV8q6CRzC
nKY8g9Z1ajH/eufgV6iSitnReAoaere4kod/5Qa5R0i/JvEx010Pe6kjQT1TYCcB
GhSe0hSIInqOYWkMt8v+2LQlAGXdopjmjcaYD/b1/IVKu2xdVPRvXNYmW9CBbMrx
xVWXQ8pNzjrJdfJZTZhAW/lkhx+AlG4KIAzOnMslTYuZ8E84ioafkmumNFPHrBw=
=TjdI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, vhost: fixes
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jun 2017 20:04:24 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pcie: fix the generic pcie root port to support migration
nvdimm acpi: fix region format interface code
vhost-user-bridge: fix iov_restore_front() warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>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=CXN6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/char-pull-request' into staging
# gpg: Signature made Thu 08 Jun 2017 15:12:11 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/char-pull-request:
test-char: start a /char/serial test
chardev: don't use alias names in parse_compat()
char: fix alias devices regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CC tests/vhost-user-bridge.o
/home/dgilbert/git/qemu-world3/tests/vhost-user-bridge.c:228:23: warning: variables 'front' and 'iov' used in loop condition not modified in loop body [-Wfor-loop-analysis]
for (cur = front; front != iov; cur++) {
^~~~~ ~~~
1 warning generated.
Fix the loop, document the function, and fix some related assert().
In practice, the loop bug was harmless because the front sg buffer is
enough to discard/restore the header size.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Jens Freimann <jfreiman@redhat.com>
Quite limited test, to check that the chardev can be created with a
path and with the tty alias.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It tests the accuracy of rtc periodic timer which is recently
improved & fixed by commit 7ffcb539a3 ("mc146818rtc: precisely count
the clock for periodic timer", 2017-05-19).
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170527025301.23499-1-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0C6J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-06-05
# gpg: Signature made Mon 05 Jun 2017 19:58:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
scripts: Test script to look for -device crashes
qemu.py: Add QEMUMachine.exitcode() method
qemu.py: Don't set _popen=None on error/shutdown
spapr: cleanup spapr_fixup_cpu_numa_dt() usage
numa: move numa_node from CPUState into target specific classes
numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result
numa: make sure that all cpus have has_node_id set if numa is enabled
numa: move default mapping init to machine
numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr
pc: Use "min-[x]level" on compat_props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently objects specified on the command-line are only partially
cleaned up when 'object_del' is issued in either HMP or QMP: the
object itself is fully finalized, but the QemuOpts are not removed.
This results in the following behavior:
x86_64-softmmu/qemu-system-x86_64 -monitor stdio \
-object memory-backend-ram,id=ram1,size=256M
QEMU 2.7.91 monitor - type 'help' for more information
(qemu) object_del ram1
(qemu) object_del ram1
object 'ram1' not found
(qemu) object_add memory-backend-ram,id=ram1,size=256M
Duplicate ID 'ram1' for object
Try "help object_add" for more information
which can be an issue for use-cases like memory hotplug.
This happens on the HMP side because hmp_object_add() attempts to
create a temporary QemuOpts entry with ID 'ram1', which ends up
conflicting with the command-line-created entry, since it was never
cleaned up during the previous hmp_object_del() call.
We address this by adding a check in user_creatable_del(), which
is called by both qmp_object_del() and hmp_object_del() to handle
the actual object cleanup, to determine whether an option group entry
matching the object's ID is present and removing it if it is.
Note that qmp_object_add() never attempts to create a temporary
QemuOpts entry, so it does not encounter the duplicate ID error,
which is why this isn't generally visible in libvirt.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Daniel Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1496531612-22166-3-git-send-email-mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
check-qom-proplist originally added tests for verifying that
object-creation helpers object_new_with_{props,propv} behaved in
similar fashion to the "traditional" method involving setting each
individual property separately after object creation rather than
via a single call.
Another similar "helper" for creating Objects exists in the form of
objects specified via -object command-line parameters. By that
rationale, we extend check-qom-proplist to include similar checks
for command-line-created objects by employing the same
qemu_opts_parse()-based parsing the vl.c employs.
This parser has a side-effect of parsing the object's options into
a QemuOpt structure and registering this in the global QemuOptsList
using the Object's ID. This can conflict with future Object instances
that attempt to use the same ID if we don't ensure this is cleaned
up as part of Object finalization, so we include a FIXME stub to test
for this case, which will then be resolved in a subsequent patch.
Suggested-by: Daniel Berrange <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Daniel Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1496531612-22166-2-git-send-email-mdroth@linux.vnet.ibm.com>
[Comment formatting tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1494327362-30727-3-git-send-email-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Since the automatic cpuid-level code was introduced in commit
c39c0edf9b ("target-i386: Automatically
set level/xlevel/xlevel2 when needed"), the CPU model tables just define
the default CPUID level code (set using "min-level"). Setting
"[x]level" forces CPUID level to a specific value and disable the
automatic-level logic.
But the PC compat code was not updated and the existing "[x]level"
compat properties broke compatibility for people using features that
triggered the auto-level code. To keep previous behavior, we should set
"min-[x]level" instead of "[x]level" on compat_props.
This was not a problem for most cases, because old machine-types don't
have full-cpuid-auto-level enabled. The only common use case it broke
was the CPUID[7] auto-level code, that was already enabled since the
first CPUID[7] feature was introduced (in QEMU 1.4.0).
This causes the regression reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1454641
Change the PC compat code to use "min-[x]level" instead of "[x]level" on
compat_props, and add new test cases to ensure we don't break this
again.
Reported-by: "Guo, Zhiyi" <zhguo@redhat.com>
Fixes: c39c0edf9b ("target-i386: Automatically set level/xlevel/xlevel2 when needed")
Cc: qemu-stable@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>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=5eL6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into staging
# gpg: Signature made Fri 02 Jun 2017 20:12:48 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chrfe-pull-request:
char: move char devices to chardev/
char: make chr_fe_deinit() optionaly delete backend
char: rename functions that are not part of fe
char: move CharBackend handling in char-fe unit
char: generalize qemu_chr_write_all()
be-hci: use backend functions
chardev: serial & parallel declaration to own headers
chardev: move headers to include/chardev
Remove/replace sysemu/char.h inclusion
char-win: close file handle except with console
char-win: rename hcom->file
char-win: rename win_chr_init/poll win_chr_serial_init/poll
char-win: remove WinChardev.len
char-win: simplify win_chr_read()
char: cast ARRAY_SIZE() as signed to silent warning on empty array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To quiet patchew, add an assert for fwrite's return value.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When you currently try to run a test directly from the command line
without setting the QTEST_QEMU_BINARY environment variable first,
you are presented with an unhelpful assertion message like this:
ERROR:tests/libqtest.c:163:qtest_init_without_qmp_handshake:
assertion failed: (qemu_binary != NULL)
Aborted (core dumped)
Let's replace the assert() with a more user friendly error message
instead.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----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=tEkM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170601' into staging
migration/next for 20170601
# gpg: Signature made Thu 01 Jun 2017 17:51:04 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170601:
migration: Move include/migration/block.h into migration/
migration: Export ram.c functions in its own file
migration: Create include for migration snapshots
migration: Export rdma.c functions in its own file
migration: Export tls.c functions in its own file
migration: Export socket.c functions in its own file
migration: Export fd.c functions in its own file
migration: Export exec.c functions in its own file
migration: Split qemu-file.h
migration: Remove unneeded includes of migration/vmstate.h
migration: shut src return path unconditionally
migration: fix leak of src file on dst
migration: Remove section_id parameter from vmstate_load
migration: loadvm handlers are not used
migration: Use savevm_handlers instead of loadvm copy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).
NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Split the file into public and internal interfaces. I have to rename
the external one because we can't have two include files with the same
name in the same directory. Build system gets confused. The only
exported functions are the ones that handle basic types.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
