The sg driver currently has a hardcoded limit of commands it
can handle simultaneously. When this limit is reached the
driver will return -EDOM. So we need to capture this to
enable proper return values here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
scsi_req_parse() already provides for a data direction setting,
so we should be using it to check for correct direction.
And we should return the sense code 'INVALID FIELD IN CDB'
in these cases.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The get_sense callback copies existing sense information into
the provided buffer. This is required if sense information
should be transferred together with the command response.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
... and remove some SCSIDevice variables or fields that now become unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the common part of scsi-disk.c and scsi-generic.c to the SCSI layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The SCSI spec has a quite detailed list of sense codes available.
It even mandates the use of specific ones for some failure cases.
The current implementation just has one type of generic error
which is actually a violation of the spec in certain cases.
This patch introduces various predefined sense codes to have the
sense code reporting more in line with the spec.
On top of Hannes's patch I fixed the reply to REQUEST SENSE commands
with DESC=0 and a small (<18) length.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is for when the request must be dropped in the void,
but still memory should be freed. To this end, the devices
register a second callback in SCSIBusOps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This covers the case of canceling a request's I/O and still
completing it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The code for canceling requests upon reset is already the same. Clean
it up and move it to scsi-bus.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently the SCSIRequest structure is abstracted away and cannot accessed
directly from the driver. This requires the handler to do a lookup on
an abstract 'tag' which identifies the SCSIRequest structure.
With this patch the SCSIRequest structure is exposed to the driver. This
allows use to use it directly as an argument to the SCSIDeviceInfo
callback functions and remove the lookup.
A new callback function 'alloc_req' is introduced matching 'free
req'; unref'ing to free up resources after use is moved into the
scsi_command_complete callbacks.
This temporarily introduces a leak of requests that are cancelled,
when they are removed from the queue and not from the driver. This
is fixed later by introducing scsi_req_cancel. That patch in turn
depends on this one, because the argument to scsi_req_cancel is a
SCSIRequest.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
With the next patch, a device may hold SCSIRequest for an indefinite
time. Split a rather big patch, and protect against access errors,
by reference counting them.
There is some ugliness in scsi_send_command implementation due to
the need to unref the request when it fails. This will go away
with the next patches, which move the unref'ing to the devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
If a request is canceled after it has been completed, scsi_cancel_io
would pass a stale aiocb to bdrv_aio_cancel. Avoid this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
There are more operations than a SCSI bus can handle, besides completing
commands. One example, which this series will introduce, is cleaning up
after a request is cancelled.
More long term, a "SCSI bus" can represent the LUNs attached to a
target; in this case, while all commands will ultimately reach a logical
unit, it is the target who is in charge of answering REPORT LUNs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
This abstracts calling the command_complete callback, reducing churn
in the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
scsi-generic scsi_read_complete() should not -both- call the client
complete callback with SCSI_REASON_DATA -and- call
scsi_command_complete(). The former will cause the client to queue a
new read or write request, while the later will free the request data
structure, thus causing the new read or write request to use a
freed/stale structure when it completes.
This patch fixes the bug, fixing a crash with scsi-generic & RHEL5.5
installer.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
Fix a bug in mtsr/mtsrin emulation on ppc64
pSeries: Clean up write-only variables
w32: Fix compilation and replace non-portable usage of ulong
The SDIO specification introduces new commands 52 and 53.
Handle as illegal command but do not complain on stderr,
as SDIO-aware OSes (including Linux) may legitimately use
these in their probing for presence of an SDIO card.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove a duplicate #include of sysbus.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If pic_irq is greater than 7, the irq level is always 0 on 32bits.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
A few pieces of the pSeries emulation code have variables which are set
but never used, which causes warnings on gcc 4.6. This patch removes
these instances.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
the s390 memory detection has a 16bit field that specifies the amount of
increments. This patch adopts the memory size to always fit into that
scheme. This also fixes virtio detection for these guests, since the
descriptor page is located after the main memory.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390x virtio bus keeps management information on virtio after the top
of the guest's RAM. We need to be able to tell the guest the size of its
RAM (without virtio stuff), but also be able to trap when the guest accesses
RAM outside of its scope (including virtio stuff).
So we need a variable telling us the size of the virtio stuff, so we can
calculate the highest available RAM address from that.
While at it, also increase the maximum number of virtio pages, so we play
along well with more recent kernels that spawn a ridiculous number of virtio
console adapters.
Signed-off-by: Alexander Graf <agraf@suse.de>
AHCI provides two ways of reading/writing data:
1) NCQ
2) ATA commands with the LBA in the command FIS
In the second code path, we didn't handle any LBAs that were bigger than
16 bits, so whenever a guest that used high LBA numbers wanted to access
data, the LBA got truncated down to 16 bits, giving the guest garbage.
This patch adds support for LBAs higher than 16 bits. I've tested that it
works just fine with SeaBIOS and Linux guests. This patch also unbreaks
the often reported grub errors people have seen with AHCI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch makes qemu ignore unplug requests from the guest for pci
devices which are tagged as non-hotpluggable. Trouble spot is the
piix4 chipset with the ISA bridge. Requests to unplug that one will
make it go away together with all ISA bus devices, which are not
prepared to be unplugged and thus don't cleanup, leaving active
qemu timers behind in free'ed memory.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. Unlike
DriveInfo, BlockDriverState should be about the host part only.
One of the remaining guest bits there is the "type hint". -drive
option media sets it, and qdevs "ide-drive", "scsi-disk" and non-qdev
IF_XEN devices check it to pick HD vs. CD.
Communicate -drive option media via new DriveInfo member media_cd
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A "scsi-disk" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "scsi-hd" and "scsi-cd" to model disk vs. CD in
the guest part.
Keep scsi-disk for backward compatibility.
Don't copy scsi-disk property removable to scsi-cd. It's not used and
always zero(!) there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An "ide-drive" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "ide-hd" and "ide-cd" to model disk vs. CD in
the guest part.
Keep ide-drive for backward compatibility.
"ide-disk" would perhaps be a nicer name than "ide-hd", but there's
already "scsi-disk", which is like "ide-drive", and will be likewise
split in the next commit. {ide,scsi}-{hd,cd} is the best consistent
set of names I could find within the backward compatibility
straightjacket.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If ahci_dma_set_inactive is called a while there is still a pending BH
from a previous run, we will crash on the second run of
ahci_check_cmd_bh as it overwrites AHCIDevice::check_bh. Avoid this
broken and redundant duplicate registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These printfs aren't really debug messages, but clearly indicate a bug if they
ever become effective. Noone uses DEBUG_IDE, let's re-enable the check
unconditionally and make it an assertion instead of printfs in the device
emulation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
cppcheck report:
hw/xen_disk.c:309: style:
Variable 'len' is assigned a value that is never used
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix regression of 667bb59: ahci_init initializes ahci.mem, so we have to
move bar registration after it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
The e500 PCI controller isn't qdev'ified yet. This leads to severe issues
when running with -drive.
To be able to use a virtio disk with an e500 VM, let's convert the PCI
controller over to qdev.
Reviewed-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have some nice helpers that can find us a TLB entry, let's
use that on the machine initialization code, so we don't need to know
about the internals of the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPC8544DS board emulation was only used with KVM so far, so some
parts of the code didn't provide proper values for non-KVM execution.
This patch makes the machine work without KVM enabled. To actually use
this, you also need proper e500v2 MMU emulation.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPC8544DS board emulation code ignored the user defined -cpu switch.
This patch enables it to only provide a sane default, not force an e500v2
CPU inside.
Signed-off-by: Alexander Graf <agraf@suse.de>
