C99 7.15.1: Each invocation of the va_start and va_copy macros shall
be matched by a corresponding invocation of the va_end macro in the
same function.
Spotted by Coverity. Harmless on the (common) systems where va_end()
does nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
I'm getting:
could not configure /dev/net/tun (tap%d): Operation not permitted
When the ioctl() fails, ifr.ifr_name will most likely not be overwritten.
So we better only use it when ifname contains a string.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Use QLIST_INSERT_HEAD_RCU and rcu_read_lock/unlock instead of rwlocks.
Use v9fs_synth_mutex as a write-only mutex to handle concurrent writers.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
SynthFS needs a QLIST_INSERT_HEAD_RCU to make sure list instructions are not
re-ordered and therefore avoiding a crash. There may be parallel readers which
should be allowed for lock-free access and this variant allows us to get rid
of rwlocks used by readers.
SynthFS is a special case where we dont really need full RCU capabilities as
it doesnt allow list entry deletion but concurrent readers/writers and
instruction re-ordering should not result in a crash.
Also, once the real rcu is available, dummy rcu macro definitions will go away
and the code will still work as expected.
This patchwork is based on inputs from Paolo Bonzini.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line
mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint>
Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below
qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node);
qemu_v9fs_synth_add_file(node, 0777, "testfile",
my_test_read, NULL, NULL);
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
To implement synthetic file system in Qemu we may not really
require file descriptor and Dir *. Make generic code use
V9fsFidOpenState instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
According to David Gibson for some compiler/libc combinations, open_by_handle_at
test in configure isn't quite right: because the file_handle pointer is never
dereferenced, gcc doesn't complain even if it is undefined. Change the test
as suggested by him.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Instantiate the PL041 audio on the Versatile Express and
Realview board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This driver emulates the ARM AACI interface (PL041) connected to a LM4549 codec.
It enables audio playback for the Versatile/PB platform.
Limitations:
- Supports only a playback on one channel (Versatile/Vexpress)
- Supports only one TX FIFO in compact-mode or non-compact mode.
- Supports playback of 12, 16, 18 and 20 bits samples.
- Record is not supported.
- The PL041 is hardwired to a LM4549 codec.
Versatile/PB test build:
linux-2.6.38.5
buildroot-2010.11
alsa-lib-1.0.22
alsa-utils-1.0.22
mpg123-0.66
Qemu host: Ubuntu 10.04 in Vmware/OS X
Playback tested successfully with speaker-test/aplay/mpg123.
Signed-off-by: Mathieu Sonet <contact@elasticsheep.com>
[Peter Maydell: fixed typo in code clearing SL1RXBUSY/SL2RXBUSY
bits, as spotted by Andrzej Zaborowski]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
If the deposit replaces the entire word, optimize to a move.
If we're inserting to the top of the word, avoid the mask of arg2
as we'll be shifting out all of the garbage and shifting in zeros.
If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit
when possible.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adding an offset to a void pointer works with gcc but is not allowed
by the current C standards. With -pedantic, gcc complains:
exec-all.h:344: error: pointer of type ‘void *’ used in arithmetic
Fix this, and also replace (unsigned long) by (uintptr_t) in the same
statement.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
linux-headers/asm is a symlink generated during configure. It should not,
therefore be committed to git, nor show up in git diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
scsi-block is a new device that supports device passthrough of Linux
block devices (i.e. /dev/sda, not /dev/sg0). It uses SG_IO for commands
other than I/O commands, and regular AIO read/writes for I/O commands.
Besides being simpler to configure (no mapping required to scsi-generic
device names), this removes the need for a large bounce buffer and,
in the future, will get scatter/gather support for free from scsi-disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The request restart mechanism is generic and could be reused for
scsi-generic. In the meanwhile, pushing it to SCSIDevice avoids
that scsi_dma_restart_bh looks at SCSIGenericReqs when working on
a scsi-block device.
The code is the same that is already in hw/scsi-disk.c, with
the type flags replaced by req->cmd.mode and a more generic way to
requeue SCSI_XFER_NONE commands.
I also added a missing call to qemu_del_vm_change_state_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In some cases a request may be canceled before the completion callback
runs. Keep a reference to the request between starting an AIO operation
and the corresponding scsi_req_cancel or scsi_*_complete.
When a request has to be retried, the request can be dropped because
scsi_dma_restart_bh only looks at requests that are enqueued. As such,
they always have at least a reference.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, if cancellation is "faked" by the AIO layer and goes
through qemu_aio_flush, the whole request is completed synchronously
during scsi_req_cancel.
Using the enqueued flag would work here, but not in the next patches,
so I'm introducing a new io_canceled flag. That's because scsi_req_data
is a synchronous callback and the enqueued flag might be reset by the
time it returns. scsi-disk cannot unref the request until after calling
scsi_req_data.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let scsi-block choose between passthrough and emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also delete a stale occurrence of SCSIReqOps inside SCSIDeviceInfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The field is only in scsi-disk for now. Moving it up to SCSIDevice makes
it easier to reuse the scsi-generic reqops elsewhere.
At the same time, make scsi-generic get max_lba from snooped READ CAPACITY
commands as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set s->removable, s->qdev.blocksize and s->qdev.type in the callers
of scsi_initfn.
With this in place, s->qdev.type is allowed, and we can just reuse it
as the first byte in VPD data (just like we do in standard INQUIRY data).
Also set s->removable is set consistently and we can use it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field is redundant, and having it makes it more complicated
to share reqops between the upcoming scsi-block and scsi-generic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Same as for scsi-generic, avoid duplication even if it causes longer
lines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of "guessing" the block size when there is no medium in the
drive, wait for the guest to send a READ CAPACITY command and snoop
it from there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass down the host status so that failing transport can be detected
by the guest. Similar treatment of host status could be done in
virtio-blk, too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A succeeding ioctl does not imply that the SCSI command succeeded.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is not needed anymore, since asynchronous ioctls were introduced
by commit 221f715 (new scsi-generic abstraction, use SG_IO, 2009-03-28).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not needed, because s->bs is already stored in SCSIDevice, and
can be reached from the conf.bs member.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Flush does not go anymore through scsi_disk_emulate_command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested by the Windows Logo Kit SCSI Compliance test. From SBC-3, paragraph
5.25: "The LOGICAL BLOCK ADDRESS field shall be set to zero if the PMI
bit is set to zero. If the PMI bit is set to zero and the LOGICAL BLOCK
ADDRESS field is not set to zero, then the device server shall terminate
the command with CHECK CONDITION status with the sense key set to ILLEGAL
REQUEST and the additional sense code set to INVALID FIELD IN CDB".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This also requires little more than adding the new argument to
scsi_device_find, and the qdev property. All devices by default
end up on channel 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This only requires changes in two places: in SCSIBus, we need to look
for a free LUN if somebody creates a device with a pre-existing scsi-id
but the default LUN (-1, meaning "search for a free spot"); in vSCSI,
we need to actually parse the LUN according to the SCSI spec.
For vSCSI, max_target/max_lun are set according to the logical unit
addressing format in SAM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the devs array into a linked list, and add a scsi_device_find
function to navigate the children list instead. This lets the SCSI
bus use more complex addressing, and HBAs can talk to the correct device
when there are multiple LUNs per target.
scsi_device_find may return another LUN on the same target if none is
found that matches exactly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI buses will need to read the children list first-to-last. This
requires using a QTAILQ, because hell breaks loose if you just try
inserting at the tail (thus reversing the order of all existing
visits from last-to-first to first-to-tail).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
