Invariant TSC documentation mentions that "invariant TSC will run at a
constant rate in all ACPI P-, C-. and T-states".
This is not the case if migration to a host with different TSC frequency
is allowed, or if savevm is performed. So block migration/savevm.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[AF+mtosatti: Updated error message]
Signed-off-by: Andreas Färber <afaerber@suse.de>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
CS.RPL is not equal to the CPL in the few instructions between
setting CR0.PE and reloading CS. We get this right in the common
case, because writes to CR0 do not modify the CPL, but it would
not be enough if an SMI comes exactly during that brief period.
Were this to happen, the RSM instruction would erroneously set
CPL to the low two bits of the real-mode selector; and if they are
not 00, the next instruction fetch cannot access the code segment
and causes a triple fault.
However, SS.DPL *is* always equal to the CPL. In real processors
(AMD only) there is a weird case of SYSRET setting SS.DPL=SS.RPL
from the STAR register while forcing CPL=3, but we do not emulate
that.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The subsection already exists in one well-known enterprise Linux
distribution, but for some strange reason the fields were swapped
when forward-porting the patch to upstream.
Limit headaches for said enterprise Linux distributor when the
time will come to rebase their version of QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1396452782-21473-1-git-send-email-pbonzini@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx
This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add some MPX related definiation, and hardcode sizes and offsets
of xsave features 3 and 4. It also add corresponding part to
kvm_get/put_xsave, and vmstate.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent KVM patch adds IA32_FEATURE_CONTROL support. QEMU needs
to clear this MSR when reset vCPU and keep the value of it when
migration. This patch add this feature.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Older KVM version put invalid value in the segments registers dpl field for
real mode guests (0x3).
This breaks migration from those hosts to hosts with unrestricted guest support.
We detect it by checking CS dpl value for real mode guest and fix the dpl values
of all the segment registers.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Older KVM versions save CS dpl value to an invalid value for real mode guests
(0x3). This patch detect this situation when loading CPU state and set all the
segments dpl to zero.
This will allow migration from older KVM on host without unrestricted guest
to hosts with restricted guest support.
For example migration from a Penryn host (with kernel 2.6.32) to
a Westmere host (for real mode guest) will fail with "kvm: unhandled exit 80000021".
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Read and write steal time MSR, so that reporting is functional across
migration.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. Drop cpu_{save,load}().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implicit use of dr7 bit field is a little hard to understand,
so define constants for them and use them consistently.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUID.7.0.EBX[1]=1 indicates IA32_TSC_ADJUST MSR 0x3b is supported
Basic design is to emulate the MSR by allowing reads and writes to the
hypervisor vcpu specific locations to store the value of the emulated MSRs.
In this way the IA32_TSC_ADJUST value will be included in all reads to
the TSC MSR whether through rdmsr or rdtsc.
As this is a new MSR that the guest may access and modify its value needs
to be migrated along with the other MRSs. The changes here are specifically
for recognizing when IA32_TSC_ADJUST is enabled in CPUID and code added
for migrating its value.
Signed-off-by: Will Auld <will.auld@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Support get/set of new PV EOI MSR, for migration.
Add an optional section for MSR value - send it
out in case MSR was changed from the default value (0).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc]
sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
It's needed for its default value - bit 0 specifies that "rep movs" is
good enough for memcpy, and Linux may use a slower memcpu if it is not set,
depending on cpu family/model.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM add emulation of lapic tsc deadline timer for guest.
This patch is co-operation work at qemu side.
Use subsections to save/restore the field (mtosatti).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM add emulation of lapic tsc deadline timer for guest.
This patch is co-operation work at qemu side.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
These FPU states are properly maintained by KVM but not yet by TCG. So
far we unconditionally set them to 0 in the guest which may cause
state corruptions, though not with modern guests.
To avoid breaking backward migration, use a conditional subsection that
is only written if any of the three fields is non-zero. The guest's
FNINIT clears them frequently, and cleared IA32_MISC_ENABLE MSR[2]
reduces the probability of non-zero values further so that this
subsection is not expected to restrict migration in any common scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Now that target-i386 uses softfloat, floatx80 is always available and
there is no need anymore to have code handling both float64 and floax80.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reverts commit c995b495b9.
From Jan Kiszka:
Ouch, indeed. Moreover, CPU_SAVE_VERSION was not updated (likely the
reason for the breakage). Thanks for debugging this!
Anthony (or whoever), please revert this unneeded commit in qemu.git.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit ebbc8a3d8e76d0402f8a08c10c0f32e24715d41d.
As suggested by Jan Kiszka,
"It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now
saves/restores a useless field."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcelo correctly remarked that there are usage conflicts between QEMU
core code and KVM /wrt exception_index. So spend a separate field and
also save/restore it properly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, the msrs involved in setting up pvclock are not saved over
migration and/or save/restore. This patch puts their value in special
fields in our CPUState, and deal with them using vmstate.
kvm also has to account for it, by including them in the msr list
for the ioctls.
This is a backport from qemu-kvm.git
[v2: sucessfully build without kerneldir ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As KVM now makes use of exception_index to keep pending exceptions, we
have to save&restore this field as well.
NOTE: We have to nail the arch-independent exception_index down to a
certain bit width for proper vmstate processing, namely to 32 bit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing exception,
interrupt and NMI states.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop interrupt_bitmap from the cpustate and solely rely on the integer
interupt_injected. This prepares us for the new injected-interrupt
interface, which will deprecate the bitmap, while preserving
compatibility.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to define VMSTATE_SINGLE with VMSTATE_SINGLE_TEST
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There was a missmerge, and then we got a tail recursive call to cpu_post_load
without case base :)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
