Commit Graph

51 Commits

Author SHA1 Message Date
Blue Swirl c9a43af9af Fix Sparc64 build
952760bb7b missed one change.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 20:37:50 +00:00
Michael S. Tsirkin 63e6f31d1b apc_pci: simplify using rwhandler
Use rwhandler to simplify apb_pci.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-22 21:23:11 +00:00
Michael S. Tsirkin 8414f45cb0 apb_pci: minor cleanup
pci_data_write ignores high 8 bit in address,
so there seems to be no need to set them
in apb_pci.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-22 21:02:46 +00:00
Blue Swirl 9fe52c7f48 sparc64: use PCI accessors for APB/PBM
Remove useless set to zero lines. Latency programming should be
done by BIOS, reset value is zero.

Add revision to APB, don't enable PCI_COMMAND_MASTER and set status
according to APB specification.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-14 08:27:19 +00:00
Blue Swirl 95819af015 sparc64: implement basic IOMMU/interrupt handling
Also add reset control.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-30 19:48:12 +00:00
Blue Swirl a4d5f62ceb Sparc64: byte swap IO port access
This requires an updated OpenBIOS image.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-29 18:15:21 +00:00
Blue Swirl 776e1bbb6c PCI: fix bridge configuration
PCI bridges' qdev info structures must indicate bridge header type,
otherwise critical bridge registers (esp. PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-26 21:59:57 +00:00
Blue Swirl 204c7a39d0 Sparc64: fix PCI probe problems
Byte swap PCI config values.

Remove old bogus PCI config mechanism so that device 0:0.0 can be probed.
This requires OpenBIOS r667.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-22 18:39:49 +00:00
Blue Swirl 3eb26cc216 Sparc64: Fix PCI config accessor order
Fix by Igor Kovalenko.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-12 20:04:53 +00:00
Blue Swirl 5a5d4a7651 Sparc64: enable real access to PCI configuration space
Leave the bogus access method used by OpenBIOS in place for now.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-11 21:20:53 +00:00
Blue Swirl bae7b517a2 Sparc64: increase APB register range
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-10 18:25:48 +00:00
Blue Swirl f6b6f1bc80 Sparc64: move APB PCI memory base to correct location
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-27 20:52:39 +00:00
Michael S. Tsirkin d6318738c3 pci: move apb specific stuff to apb_pci.c
pci code had a TODO to move apb specific
pci bridge initialization to apb_pci.
Implement this and remove the TODO.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-02 08:57:42 -06:00
Isaku Yamahata f08b32fe95 pci: shorten pci_host_{conf, data}_register_xxx function a bit.
pci_host_data_register_io_memory and its variants are too long a bit.
So shorten them. Now they are
pci_host_{conf, data}_register_{mmio, mmio_noswap, ioport}()

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 17:51:37 +02:00
Michael S. Tsirkin 18e08a5529 pci: pci.h cleanup: move out stuff not in pci.c
pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 17:51:04 +02:00
Isaku Yamahata a455783bb6 pci_host: consolidate pci config address access.
consolidate pci_config address access into pci_host.c

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:08 -06:00
Isaku Yamahata 4f5e19e6c5 pci_host.h: move functions in pci_host.h into .c file.
split static functions in pci_host.h into pci_host.c and
pci_host_template.h.
Later a structures declared in pci_host.h, PCIHostState, will be used.
However pci_host.h doesn't allow to include itself easily. This patches
addresses it.

pci_host.h includes functions which are instantiated in .c by including
pci_host.h with typedefing pci_addr_t.
pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio
or target_phys_addr_t for mmio in .c file.
That prevents from including pci_host.h to use PCIHostState because of
requiring type, pci_addr_t.

Its purpose to include is to instantiate io function for mmio or ioio
depending on which pci host bridge requires ioio or mmio.
To avoid including code, we always instantiate both version.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:07 -06:00
Isaku Yamahata 2217dcfff5 pci: use PCI_SLOT() and PCI_FUNC().
use PCI_SLOT() and PCI_FUNC() where appropriate instead of
direct use of bit operation.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:04 -06:00
Blue Swirl 930f3fe11f Add some chipset doc links
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-13 18:56:27 +00:00
Markus Armbruster e23a1b33b5 New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07 08:54:54 -05:00
Anthony Liguori c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc 99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Blue Swirl afcea8cbde ioports: remove unused env parameter and compile only once
The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 16:05:47 +00:00
Blue Swirl c5ff6d5472 Sparc64: make system bus parent of PCI bus
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-13 08:32:40 +00:00
Juan Quintela 5d4e84c8b9 We want the argument pass to set_irq to be opaque
piix_pci want to pass more things that the pic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:23 -05:00
Gerd Hoffmann 81a322d4a1 qdev: add return value to init() callbacks.
Sorry folks, but it has to be.  One more of these invasive qdev patches.

We have a serious design bug in the qdev interface:  device init
callbacks can't signal failure because the init() callback has no
return value.  This patch fixes it.

We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault.  This patch fixes it.

With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:28 -05:00
Blue Swirl d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Blue Swirl 72f44c8cc7 Sparc64: convert APB to qdev
Thanks to Igor Kovalenko for a bugfix.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-21 08:53:35 +00:00
Blue Swirl 110c50fd31 Revert "Fix the PCI header type of APB"
This reverts commit e8d2a88755.
2009-07-11 08:38:39 +00:00
Isaku Yamahata d56dd6cf03 use constant IOPORTS_MASK instead of 0xffff.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:06:39 -05:00
Blue Swirl e8d2a88755 Fix the PCI header type of APB
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-05 20:33:02 +00:00
Avi Kivity 1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Paul Brook 02e2da45c4 Add common BusState
Implement and use a common device bus state.  The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations.  For legacy code we allow a NULL parent, but that
should go away eventually.

Also tweak creation code to veriry theat a device in on the right bus.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-23 00:13:41 +01:00
Blue Swirl 001faf3269 Replace gcc variadic macro extension with C99 version
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-13 17:53:17 +00:00
Isaku Yamahata 6407f37373 use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-05-03 19:03:00 +00:00
blueswir1 173a543b36 Add and use #defines for PCI device classes
This patch adds and uses #defines for PCI device classes and subclases,
using a new pci_config_set_class() function, similar to the recently
added pci_config_set_vendor_id() and pci_config_set_device_id().

Change since v1: fixed compilation of hw/sun4u.c

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01 19:26:20 +00:00
blueswir1 480b9f24d7 Add Simba device ID
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6465 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-27 19:15:31 +00:00
aliguori deb54399df Define PCI vendor and device IDs in pci.h (Stuart Brady)
This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.

Change from v1:
  Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
  accessors as suggested by Anthony Liguori.

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26 15:37:35 +00:00
blueswir1 c190ea0729 Add EBUS bridge
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6266 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-10 11:33:32 +00:00
blueswir1 a94fd955eb Fix APB
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6265 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-09 20:53:30 +00:00
blueswir1 1d6198c3b0 Remove unnecessary trailing newlines
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13 09:32:43 +00:00
blueswir1 77f193daa8 Wrap long lines
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4440 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-12 16:13:33 +00:00
pbrook 87ecb68bdf Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17 17:14:51 +00:00
blueswir1 f930d07eda More detabification
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3338 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-06 11:28:21 +00:00
ths 5fafdf24ef find -type f | xargs sed -i 's/[\t ]$//g' # on most files
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16 21:08:06 +00:00
blueswir1 fdf41d225e Replace target_ulong with target_phys_addr_t
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2899 c046a42c-6fe2-441c-8c8c-71466251a162
2007-05-30 18:54:40 +00:00
pbrook d537cf6c86 Unify IRQ handling.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2635 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-07 18:14:41 +00:00
pbrook 4258b780af Sparc64 build fix (Igor Kovalenko).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2269 c046a42c-6fe2-441c-8c8c-71466251a162
2006-12-22 22:35:25 +00:00
pbrook 80b3ada7dd Implement sun4u PCI IRQ routing.
Allow multiple PCI busses and PCI-PCI bridges.
Fix bugs in Versatile PCI implementation.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2166 c046a42c-6fe2-441c-8c8c-71466251a162
2006-09-24 17:01:44 +00:00
pbrook d2b5931756 PCI shared IRQ fix (original patch by andrzej zaborowski).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2165 c046a42c-6fe2-441c-8c8c-71466251a162
2006-09-24 00:16:34 +00:00