I have changed my name and email address. Update the MAINTAINERS file
to match, and .mailmap in case anyone wants to send me an email because
of some past commit I authored. (As suggested by Philippe, I put the
.mailmap line into the "preferred name forms" section, considering it
counts as a git author config change.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Setting environment variables can fail; check the return value
from g_setenv() and bail out if we couldn't set SDL_VIDEODRIVER.
Fixes: Coverity 1458798
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210809161424.32355-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The audio migration vmstate is empty, and always has been; we can't
just remove it though because an old qemu might send it us.
Changes with -audiodev now mean it's sometimes created when it didn't
used to be, and can confuse migration to old qemu.
Change it so that vmstate_audio is never sent; if it's received it
should still be accepted, and old qemu's shouldn't be too upset if it's
missing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210809170956.78536-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 584af1f1d9 ("ui/gtk: add a keyboard fifo to the VTE
consoles") changed the VTE chardev backend code to rely on the
chr_accept_input() callback function. The code expects a
chr_accept_input() call whenever qemu_chr_be_can_write() bytes
were written. It turns out this is wrong. Some chardev
frontends only call this callback after can_write was 0.
Change the code to send data until the keyboard fifo is empty
or qemu_chr_be_can_write() returns 0.
Fixes: 584af1f1d9 ("ui/gtk: add a keyboard fifo to the VTE consoles")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210810063257.17411-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the guest command fails to be spawned, then we would leak the decoded
base64 input used for the command's stdin feed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The version of GNUTLS in Fedora 34 has changed the order in which encodes
fields when generating new TLS certificates. This in turn changes the
order seen when querying the distinguished name. This ultimately breaks
the expected output in the NBD TLS iotests. We don't need to be
comparing the exact distinguished name text for the purpose of the test
though, so it is fine to filter it out.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210804180330.3469683-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fix the following build failure on musl raised since version 6.0.0 and
4ca37a96a7
because musl does not define FALLOC_FL_ZERO_RANGE:
../block/export/fuse.c: In function 'fuse_fallocate':
../block/export/fuse.c:563:23: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
563 | } else if (mode & FALLOC_FL_ZERO_RANGE) {
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/b96e3d364fd1f8bbfb18904a742e73327d308f64
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-Id: <20210809095101.1101336-1-fontaine.fabrice@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Coverity found that 'uuid', 'csi' and 'eui64' are uninitialized. While
we set most of the fields, we do not explicitly set the rsvd2 field in
the NvmeIdNsDescr header.
Fix this by explicitly zero-initializing the variables.
Reported-by: Coverity (CID 1458835, 1459295 and 1459580)
Fixes: 6870cfb814 ("hw/nvme: namespace parameter for EUI-64")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The logic before was
if not get_option('gnutls').auto() or have_system
Which is equivalent to
if get_option('gnutls').enabled() or get_option('gnutls').disabled() or have_system
This means that the check for gnutls is performed even if gnutls is
disabled, which means that the build system will insist on having
libtasn1 if gnutls is found, even if gnutls support is disabled.
When gnutls is disabled, the check for gnutls shouldn't be performed,
to ensure that further build system logic (like the check for
libtasn1) doesn't make decisions based on the presence of gnutls,
rather than the gnutls option.
After making this change, I can successfully ./configure --disable-gnutls
on my system with gnutls installed, but not libtasn1.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Message-Id: <20210806144947.321647-1-hi@alyssa.is>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Hi
Here are some bug fixes worthy for 6.1.
thanks
-----BEGIN PGP SIGNATURE-----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=KDK+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/chr-fix-pull-request' into staging
Chardev-related fixes
Hi
Here are some bug fixes worthy for 6.1.
thanks
# gpg: Signature made Thu 05 Aug 2021 13:52:03 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/chr-fix-pull-request:
chardev: report a simpler error about duplicated id
chardev: give some context on chardev-add error
chardev: fix qemu_chr_open_fd() with fd_in==fd_out
chardev: fix qemu_chr_open_fd() being called with fd=-1
chardev: fix fd_chr_add_watch() when in != out
chardev: mark explicitly first argument as poisoned
chardev/socket: print a more correct command-line address
util: fix abstract socket path copy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Report:
"Chardev with id 'char2' already exists"
Rather than:
"Failed to add chardev 'char2': duplicate yank instance"
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Description from Daniel P. Berrangé:
> The original code reported:
>
> "attempt to add duplicate property 'char2' to object (type 'container')"
>
> Since adding yank support, the current code reports
>
> "duplicate yank instance"
>
> With this patch applied it now reports:
>
> "Failed to add chardev 'char2': duplicate yank instance"
>
> This is marginally better, but still not great, not that the original
> error was great either.
>
> It would be nice if we could report
>
> "chardev with id 'char2' already exists"
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1984721
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The "serial" chardev calls qemu_chr_open_fd() with the same fd. This
may lead to double-close as each QIOChannel owns the fd.
Instead, share the reference to the same QIOChannel.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The "file" chardev may call qemu_chr_open_fd() with fd_in=-1. This may
cause invalid system calls, as the QIOChannel is assumed to be properly
initialized later on.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create child sources for the different streams, and dispatch on the
parent source with the synthesized conditions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 9894dc0cdc "char: convert
from GIOChannel to QIOChannel", the first argument to the watch callback
can actually be a QIOChannel, which is not a GIOChannel (but a QEMU
Object).
Even though we never used that pointer, change the callback type to warn
the users. Possibly a better fix later, we may want to store the
callback and call it from intermediary functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
setup_rt_frame() passes siginfo and ucontext host addresses to guest
signal handlers, causing problems when e.g. emulating x86_64 on s390x.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803171858.148394-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Better reflect the command line version of the socket address arguments,
following the now recommended long-form opt=on syntax.
Complement/fixes commit 9d902d51 "chardev: do not use short form boolean
options in non-QemuOpts character device descriptions".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 776b97d360 "qemu-sockets: add abstract UNIX domain socket
support" neglected to update socket_sockaddr_to_address_unix() and
copied the whole sun_path without taking "salen" into account.
Later, commit 3b14b4ec49 "sockets: Fix socket_sockaddr_to_address_unix()
for abstract sockets" handled the abstract UNIX path, by stripping the
leading \0 character and fixing address details, but didn't use salen
either.
Not taking "salen" into account may result in incorrect "path" being
returned in monitors commands, as we read past the address which is not
necessarily \0-terminated.
Fixes: 776b97d360
Fixes: 3b14b4ec49
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This does about the bare minimum, converting section headers to ReST
ones and adding an indent for code blocks.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210721165015.2180311-1-jsnow@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add clickables to many places.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720235619.2048797-4-jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly, add ``literal`` markers to a lot of things like C types, add
code blocks, and fix the way a few things render.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720235619.2048797-3-jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a very rudimentary conversion from .txt to .rst changing as
little as possible, but getting it to render somewhat nicely; without
using any Sphinx directives. (It is 'native' ReST.)
Further patches will add cross-references and Sphinx-specific extensions
to make it sparkle.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720235619.2048797-2-jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit 0cf8882fd0.
Which this commit, with aarch64 when using efi PCI devices with IO ports
do not work. The reason is that EFI creates I/O port mappings below
0x1000 (in fact, at 0). However Linux, for legacy reasons, does not
support I/O ports <= 0x1000 on PCI, so the I/O assignment created by EFI
is rejected.
EFI creates the mappings primarily for itself, and up until DSM #5
started to be enforced, all PCI resource allocations that existed at
boot were ignored by Linux and recreated from scratch.
Also, the commit in question looks dubious - it seems unlikely that
Linux would fail to create a resource tree. What does
happen is that BARs get moved around, which may cause trouble in some
cases: for instance, Linux had to add special code to the EFI framebuffer
driver to copy with framebuffer BARs being relocated.
DSM #5 has a long history of debate and misinterpretation.
Link: https://lore.kernel.org/r/20210724185234.GA2265457@roeck-us.net/
Fixes: 0cf8882fd0 ("acpi/gpex: Inform os to keep firmware resource map")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to commit ccee1a8140 ("acpi: Update _DSM method in expected files").
Allow changes to DSDT on ARM. Only configs with pci are
affected thus all virt variants but for microvm only the pcie variant.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit [1] switched PCI hotplug from native to ACPI one by default.
That however breaks hotplug on following CLI that used to work:
-nodefaults -machine q35 \
-device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \
-device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2
where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT], AE_NOT_FOUND (20201113/psargs-330)
ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531)
ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531)
ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)
cause is that QEMU's ACPI hotplug never supported functions other then 0
and due to bug it was generating notification entries for not described
functions.
Technically there is no reason not to describe cold-plugged bridges
(root ports) on functions other then 0, as they similarly to bridge
on function 0 are unpluggable.
So since we need to describe multifunction devices iterate over
fuctions as well. But describe only cold-plugged bridges[root ports]
on functions other than 0 as well.
1)
Fixes: 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210723090424.2092226-1-imammedo@redhat.com>
Fixes: 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35)<br>
Signed-off-by: Igor Mammedov <<a href="mailto:imammedo@redhat.com" target="_blank">imammedo@redhat.com</a>><br>
Reported-by: Laurent Vivier <<a href="mailto:lvivier@redhat.com" target="_blank">lvivier@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Q35 has now ACPI hotplug enabled by default for PCI(e) devices.
As opposed to native PCIe hotplug, guests like Fedora 34
will not assign IO range to pcie-root-ports not supporting
native hotplug, resulting into a regression.
Reproduce by:
qemu-bin -M q35 -device pcie-root-port,id=p1 -monitor stdio
device_add e1000,bus=p1
In the Guest OS the respective pcie-root-port will have the IO range
disabled.
Fix it by setting the "reserve-io" hint capability of the
pcie-root-ports so the firmware will allocate the IO range instead.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210802090057.1709775-1-marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OSS-Fuzz found sending illegal addresses when querying the write
protection bits triggers the assertion added in commit 84816fb63e
("hw/sd/sdcard: Assert if accessing an illegal group"):
qemu-fuzz-i386-target-generic-fuzz-sdhci-v3: ../hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t):
Assertion `wpnum < sd->wpgrps_size' failed.
#3 0x7f62a8b22c91 in __assert_fail
#4 0x5569adcec405 in sd_wpbits hw/sd/sd.c:824:9
#5 0x5569adce5f6d in sd_normal_command hw/sd/sd.c:1389:38
#6 0x5569adce3870 in sd_do_command hw/sd/sd.c:1737:17
#7 0x5569adcf1566 in sdbus_do_command hw/sd/core.c💯16
#8 0x5569adcfc192 in sdhci_send_command hw/sd/sdhci.c:337:12
#9 0x5569adcfa3a3 in sdhci_write hw/sd/sdhci.c:1186:9
#10 0x5569adfb3447 in memory_region_write_accessor softmmu/memory.c:492:5
It is legal for the CMD30 to query for out-of-range addresses.
Such invalid addresses are simply ignored in the response (write
protection bits set to 0).
In commit 84816fb63e ("hw/sd/sdcard: Assert if accessing an illegal
group") we misplaced the assertion *before* we test the address is
in range. Move it *after*.
Include the qtest reproducer provided by Alexander Bulekov:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed.
Cc: qemu-stable@nongnu.org
Reported-by: OSS-Fuzz (Issue 29225)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 84816fb63e ("hw/sd/sdcard: Assert if accessing an illegal group")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/495
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210802235524.3417739-3-f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Per the 'Physical Layer Simplified Specification Version 3.01',
Table 4-22: 'Block Oriented Write Protection Commands'
SEND_WRITE_PROT (CMD30)
If the card provides write protection features, this command asks
the card to send the status of the write protection bits [1].
[1] 32 write protection bits (representing 32 write protect groups
starting at the specified address) [...]
The last (least significant) bit of the protection bits corresponds
to the first addressed group. If the addresses of the last groups
are outside the valid range, then the corresponding write protection
bits shall be set to 0.
Split the if() statement (without changing the behaviour of the code)
to better position the description comment.
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210802235524.3417739-2-f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
When bdrv_pad_request() fails in bdrv_co_preadv_part(), bs->in_flight
has been increased, but is never decreased again. This leads to a hang
when trying to drain the block node.
This bug was observed with Windows guests which issue a request that
fully uses IOV_MAX during installation, so that when padding is
necessary (O_DIRECT with a 4k sector size block device on the host),
adding another entry causes failure.
Call bdrv_dec_in_flight() to fix this. There is a larger problem to
solve here because this request shouldn't even fail, but Windows doesn't
seem to care and with this minimal fix the installation succeeds. So
given that we're already in freeze, let's take this minimal fix for 6.1.
Fixes: 98ca45494f
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1972079
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210727154923.91067-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Message-Id: <20210709160459.4962-3-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently when a compare-and-trap instruction is executed, qemu will
always raise a SIGILL signal. On real hardware, a SIGFPE is raised.
Change the PGM_DATA case in cpu_loop to follow the behavior in
linux kernel /arch/s390/kernel/traps.c.
* Only raise SIGILL if DXC == 0
* If DXC matches a non-simulated IEEE exception, raise SIGFPE with
correct si_code
* Raise SIGFPE with si_code == 0 for everything else
When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes
crashes in the java jdk such as the linked bug.
Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1920913
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the
instruction, and at the instruction for other signals. Currently under
qemu-user for SIGFILL and SIGFPE it points at the instruction.
Fix by advancing psw.addr for these signals.
Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210705210434.45824-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hanna Reitz
Peter Maydell
Dr. David Alan Gilbert
Volker Rümelin
Daniel P. Berrangé
Fabrice Fontaine
Klaus Jensen
Alyssa Ross
Marc-André Lureau
Ilya Leoshkevich
John Snow
Markus Armbruster
Michael S. Tsirkin
Igor Mammedov
Marcel Apfelbaum
Philippe Mathieu-Daudé
Kevin Wolf
Jonathan Albrecht