Move floating interrupt handling into the flic. Floating interrupts
will now be considered by all CPUs, not just CPU #0. While at it, convert
I/O interrupts to use a list and make sure we properly consider I/O
sub-classes in s390_cpu_has_io_int().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a preparation for floating interrupt support and only applies to
MTTCG, single threaded TCG works just fine. If a floating interrupt wakes
up a VCPU and the CPU thinks it can run (clearing cs->halted), at
the point where the interrupt would be delivered, already another VCPU
might have picked up the interrupt, resulting in a wakeup without an
interrupt (executing wrong code).
It is wrong to let the VCPU continue to execute (the WAIT PSW). Instead,
we have to put the VCPU back to sleep.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let the flic device handle it internally. This will allow us to later
on store floating interrupts in the flic for the TCG case.
This now also simplifies kvm.c. All that's left is the fallback
interface for floating interrupts, which is now triggered directly via
the flic in case anything goes wrong.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently only support CRW machine checks. This is a preparation for
real floating interrupt support.
Get rid of the queue and handle it via the bit INTERRUPT_MCHK. We don't
rename it for now, as it will be soon gone (when moving crw machine checks
into the flic).
Please note that this is the same way also KVM handles it: only one
instance of a machine check can be pending at a time. So no need for a
queue.
While at it, make sure we try to deliver only if env->cregs[14]
actually indicates that CRWs are accepted.
Drop two unused defines on the way (we already have PSW_MASK_...).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have to consider all deliverable interrupts.
We now have to take care of the special scenario, where we first
inject an interrupt with a WAIT PSW, followed by a !WAIT PSW. (very
unlikely but possible)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implements the WHPX accelerator cpu enlightenments to actually use the whpx-all
accelerator on Windows platforms.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-5-git-send-email-juterry@microsoft.com>
[Register/unregister VCPU thread with RCU. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implements the Windows Hypervisor Platform accelerator (WHPX) target. Which
acts as a hypervisor accelerator for QEMU on the Windows platform. This enables
QEMU much greater speed over the emulated x86_64 path's that are taken on
Windows today.
1. Adds support for vPartition management.
2. Adds support for vCPU management.
3. Adds support for MMIO/PortIO.
4. Registers the WHPX ACCEL_CLASS.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-4-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's a preparation for follow-up patch to call region_del() in
memory_listener_unregister(), otherwise all device addr attached with
kvm_devices_head will be reset before calling kvm_arm_set_device_addr.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180122060244.29368-3-peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to enable TCE operations support in KVM, we have to inform
the KVM about VFIO groups being attached to specific LIOBNs;
the necessary bits are implemented already by IOMMU MR and VFIO.
This defines get_attr() for the SPAPR TCE IOMMU MR which makes VFIO
call the KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE ioctl and establish
LIOBN-to-IOMMU link.
This changes spapr_tce_set_need_vfio() to avoid TCE table reallocation
if the kernel supports the TCE acceleration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
[aw - remove unnecessary sys/ioctl.h include]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
hvf.c and vmx.h contain code from hvdos.c that is released as public domain:
from hvdos github: https://github.com/mist64/hvdos
"License
See LICENSE.txt (2-clause-BSD).
In order to simplify use of this code as a template, you can consider any parts from "hvdos.c" and "interface.h" as being in the public domain."
Signed-off-by: Izik Eidus <izik@veertu.com>
Message-Id: <20180123123639.35255-2-izik@veertu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We masked the wrong bits, which prevented some of the
32-bit R registers. E.g. "fcnvxf,sgl,sgl fr22R,fr6R".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is an extension to the base ISA, but we can use this in
the kernel idle loop to reduce the host cpu time consumed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP-UX 10.20 CD contains "add r0, r0, r27" in a delay slot,
which uses at least 5 temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unknown why this works, but if we return EXCP_ITLB_MISS we
will triple-fault the first userland instruction fetch.
Is it something to do with having a combined I/DTLB?
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linux sets sr4-sr7 all to the same value, which means that we
need not do any runtime computation to find out what space to
use in forming the GVA.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Real hardware would use an external device to control the power.
But for the moment let's invent instructions in reserved space,
to be used by our custom firmware.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
However since HPPA has a software-managed TLB, and the relevant
TLB manipulation instructions are not implemented, this does not
actually do anything.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Any one TB will have only one space value. If we change spaces,
we change TBs. Thus BE and BEV must exit the TB immediately.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These instructions force the destination privilege level
of the branch destination to be no higher than current.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This changes the system virtual address width to 64-bit and
incorporates the space registers into load/store operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the E bit is only used for pa2.0 mfctl,w from sar,
the otherwise reserved bit does not appear to be decoded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most aspects of privilege are not yet handled. But this
gives us the start from which to begin checking.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For system mode, we will need 64-bit virtual addresses even when
we have 32-bit register sizes. Since the rest of QEMU equates
TARGET_LONG_BITS with the address size, redefine everything
related to register size in terms of a new TARGET_REGISTER_BITS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
