Make qmp_pc_dimm_device_list() return sorted by start address
list of devices so that it could be reused in places that
would need sorted list*. Reuse existing pc_dimm_built_list()
to get sorted list.
While at it hide recursive callbacks from callers, so that:
qmp_pc_dimm_device_list(qdev_get_machine(), &list);
could be replaced with simpler:
list = qmp_pc_dimm_device_list();
* follow up patch will use it in build_srat()
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using log unimp is more appropriate for these messages and this also
silences them by default so they won't clobber make check output when
tests are added for this board.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the new "--nic" command line parameter option, the "old" way of
specifying a NIC model via the nd_table[] is becoming more prominent
again. But for the pseries "spapr-vlan" device, there is a confusing
discrepancy between the model name that is used for "--device" (i.e.
"spapr-vlan") and the model name that has to be used for "--net nic"
or the new "--nic" parameter (i.e. "ibmveth"). Since "spapr-vlan" is
the "real" name of the device, let's allow "spapr-vlan" to be used
as model name for the nd_table[] entries, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch moves the gap between u-boot and kernel at the correct location.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The global hack for creating SCSI devices has recently been removed,
but this apparently broke SCSI devices on some boards that were not
ready for this change yet. For the 40p machine you now get:
$ ppc64-softmmu/qemu-system-ppc64 -M 40p -cdrom x.iso
qemu-system-ppc64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2
Fix it by providing a lsi53c810_create() function that takes care
of calling scsi_bus_legacy_handle_cmdline() after creating the
corresponding SCSI controller.
Fixes: 1454509726
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
This adds a possibility for the platform to tell VFIO not to emulate MSIX
so MMIO memory regions do not get split into chunks in flatview and
the entire page can be registered as a KVM memory slot and make direct
MMIO access possible for the guest.
This enables the entire MSIX BAR mapping to the guest for the pseries
platform in order to achieve the maximum MMIO preformance for certain
devices.
Tested on:
LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since the PC87312 inherits this abstract model, we remove the I8042
instance in the PREP machine.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180308223946.26784-14-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-6-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-4-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After reviewing a patch from Philippe that removes block-backend.h
from hw/lm32/milkymist.c, I noticed that this header is included
unnecessarily in a lot of other files, too. Remove those unneeded
includes to speed up the compilation process a little bit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the hard-coded list of PCI NIC names; instead, fill an array
using all PCI devices listed under DEVICE_CATEGORY_NETWORK. Keep
the old shortcut "virtio" for virtio-net-pci.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes an incorrect behavior when the -kernel argument has been
specified without -bios. In this case the kernel was loaded twice. At address
32M as a raw image and afterwards by load_elf/load_uimage at the
corresponding load address. In this case the region for the device tree and
the raw kernel image may overlap.
The patch fixes the behavior by loading the kernel image once with
load_elf/load_uimage and skips loading the raw image.
When here do not use bios_name/size for the kernel and use a more generic
name called payload_name/size.
New in v3: dtb must be stored between kernel and initrd because Linux can
handle the dtb only within the first 64MB. Add a comment to
clarify the behavior.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Linux kernel commit 2a9d832cc9aae21ea827520fef635b6c49a06c6d
(of: Add bindings for chosen node, stdout-path) deprecated chosen property
"linux,stdout-path" and "stdout".
Introduce the new property "stdout-path" and continue supporting the older
property to remain compatible with existing/older firmware. This older property
can be deprecated after 5 years.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sxxm (speculative execution exploit mitigation) machine type is a
variant of the 2.12 machine type with workarounds for speculative
execution vulnerabilities enabled by default.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert cap-ibs (indirect branch speculation) to a custom spapr-cap
type.
All tristate caps have now been converted to custom spapr-caps, so
remove the remaining support for them.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Don't explicitly list "?"/help option, trust convention]
[dwg: Fold tristate removal into here, to not break bisect]
[dwg: Fix minor style problems]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are currently 2 implemented types of spapr-caps, boolean and
tristate. However there may be a need for caps which don't fit either of
these options. Add a custom capability type for which a list of custom
valid strings can be specified and implement the get/set functions for
these. Also add a field for help text to describe the available options.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Change "help" option to "?" matching qemu conventions]
[dwg: Add ATTRIBUTE_UNUSED to avoid breaking bisect]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the remaining comment into macio.c for reference, then remove the
macio_init() function and instantiate the macio devices for both Old World
and New World machines via qdev_init_nofail() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also switch macio_newworld_realize() over to use it rather than using the pic_mem
memory region directly.
Now that both Old World and New World macio devices no longer make use of the
pic_mem memory region directly, we can remove it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is needed before the next patch because the target-dependent kvm stub
uses the existing kvm_openpic_connect_vcpu() declaration, making it impossible
to move the device-specific declarations into the same file without breaking
ppc-linux-user compilation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also switch macio_oldworld_realize() over to use it rather than using the pic_mem
memory region directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This enables the device to be made available during the setup of the Old World
machine. In order to pass back the previous set of IRQs we temporarily introduce
a new pic_irqs parameter until it can be removed.
An additional benefit of this change is that it is also possible to remove the
pic_mem pointer used for macio by accessing the memory region via sysbus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the ESCC device is instantiated directly via qdev, move it to within
the macio device and wire up the IRQs and memory regions using the sysbus API.
This enables to remove the now-obsolete escc_mem parameter to the macio_init()
function.
(Note this patch also contains small touch-ups to the formatting in
macio_escc_legacy_setup() and ppc_heathrow_init() in order to keep checkpatch
happy)
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VSMT must be set in order to compute VCPU ids. This means that the
following functions must not be called before spapr_set_vsmt_mode()
was called:
- spapr_vcpu_id()
- spapr_is_thread0_in_vcore()
- xics_max_server_number()
We had a recent regression where the latter would be called before VSMT
was set, and broke migration of some old machine types. This patch
adds assert() in the above functions to avoid problems in the future.
Also, since VSMT is really a CPU related thing, spapr_set_vsmt_mode() is
now called from spapr_init_cpus(), just before the first VSMT user.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some older machine types create more ICPs than needed. We hence
need to register up to xics_max_server_number() dummy ICPs to
accomodate the migration of these machine types.
Recent VSMT rework changed xics_max_server_number() to return
DIV_ROUND_UP(max_cpus * spapr->vsmt, smp_threads)
instead of
DIV_ROUND_UP(max_cpus * kvmppc_smt_threads(), smp_threads);
The change is okay but it requires spapr->vsmt to be set, which
isn't the case with the current code. This causes the formula to
return zero and we don't create dummy ICPs. This breaks migration
of older guests as reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1549087
The dummy ICP workaround doesn't really have a dependency on XICS
itself. But it does depend on proper VCPU id numbering and it must
be applied before creating vCPUs (ie, creating real ICPs). So this
patch moves the workaround to spapr_init_cpus(), which already
assumes VSMT to be set.
Fixes: 72194664c8 ("spapr: use spapr->vsmt to compute VCPU ids")
Reported-by: Lukas Doktor <ldoktor@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the PCIX controller found in newer 440 core SoCs e.g. the
AMMC 460EX. The device tree refers to this as plb-pcix compared to
the plb-pci controller in older 440 SoCs.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Remove hwaddr from trace-events, that doesn't work with some
trace backends]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 5d0fb1508e "spapr: consolidate the VCPU id numbering logic
in a single place" introduced a helper to detect thread0 of a virtual
core based on its VCPU id. This is used to create CPU core nodes in
the DT, but it is broken in TCG.
$ qemu-system-ppc64 -nographic -accel tcg -machine dumpdtb=dtb.bin \
-smp cores=16,maxcpus=16,threads=1
$ dtc -f -O dts dtb.bin | grep POWER8
PowerPC,POWER8@0 {
PowerPC,POWER8@8 {
instead of the expected 16 cores that we get with KVM:
$ dtc -f -O dts dtb.bin | grep POWER8
PowerPC,POWER8@0 {
PowerPC,POWER8@8 {
PowerPC,POWER8@10 {
PowerPC,POWER8@18 {
PowerPC,POWER8@20 {
PowerPC,POWER8@28 {
PowerPC,POWER8@30 {
PowerPC,POWER8@38 {
PowerPC,POWER8@40 {
PowerPC,POWER8@48 {
PowerPC,POWER8@50 {
PowerPC,POWER8@58 {
PowerPC,POWER8@60 {
PowerPC,POWER8@68 {
PowerPC,POWER8@70 {
PowerPC,POWER8@78 {
This happens because spapr_get_vcpu_id() maps VCPU ids to
cs->cpu_index in TCG mode. This confuses the code in
spapr_is_thread0_in_vcore(), since it assumes thread0 VCPU
ids to have a spapr->vsmt spacing.
spapr_get_vcpu_id(cpu) % spapr->vsmt == 0
Actually, there's no real reason to expose cs->cpu_index instead
of the VCPU id, since we also generate it with TCG. Also we already
set it explicitly in spapr_set_vcpu_id(), so there's no real reason
either to call kvm_arch_vcpu_id() with KVM.
This patch unifies spapr_get_vcpu_id() to always return the computed
VCPU id both in TCG and KVM. This is one step forward towards KVM<->TCG
migration.
Fixes: 5d0fb1508e
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
These devices are found in newer SoCs based on 440 core e.g. the 460EX
(http://www.embeddeddeveloper.com/assets/processors/amcc/datasheets/
PP460EX_DS2063.pdf)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr-cap cap-ibs can only have values broken or fixed as there is
no explicit workaround required. Currently setting the value workaround
for this cap will hit an assert if the guest makes the hcall
h_get_cpu_characteristics.
Report an error when attempting to apply the setting with a more helpful
error message.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several places in the code need to calculate a VCPU id:
(cpu_index / smp_threads) * spapr->vsmt + cpu_index % smp_threads
(core_id / smp_threads) * spapr->vsmt (1 user)
index * spapr->vsmt (2 users)
or guess that the VCPU id of a given VCPU is the first thread of a virtual
core:
index % spapr->vsmt != 0
Even if the numbering logic isn't that complex, it is rather fragile to
have these assumptions open-coded in several places. FWIW this was
proved with recent issues related to VSMT.
This patch moves the VCPU id formula to a single function to be called
everywhere the code needs to compute one. It also adds an helper to
guess if a VCPU is the first thread of a VCORE.
Signed-off-by: Greg Kurz <groug@kaod.org>
[dwg: Rename spapr_is_vcore() to spapr_is_thread0_in_vcore() for clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr_vcpu_id() function is an accessor actually. Let's rename it
for symmetry with the recently added spapr_set_vcpu_id() helper.
The motivation behind this is that a later patch will consolidate
the VCPU id formula in a function and spapr_vcpu_id looks like an
appropriate name.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The VCPU ids are currently computed and assigned to each individual
CPU threads in spapr_cpu_core_realize(). But the numbering logic
of VCPU ids is actually a machine-level concept, and many places
in hw/ppc/spapr.c also have to compute VCPU ids out of CPU indexes.
The current formula used in spapr_cpu_core_realize() is:
vcpu_id = (cc->core_id * spapr->vsmt / smp_threads) + i
where:
cc->core_id is a multiple of smp_threads
cpu_index = cc->core_id + i
0 <= i < smp_threads
So we have:
cpu_index % smp_threads == i
cc->core_id / smp_threads == cpu_index / smp_threads
hence:
vcpu_id =
(cpu_index / smp_threads) * spapr->vsmt + cpu_index % smp_threads;
This formula was used before VSMT at the time VCPU ids where computed
at the target emulation level. It has the advantage of being useable
to derive a VPCU id out of a CPU index only. It is fitted for all the
places where the machine code has to compute a VCPU id.
This patch introduces an accessor to set the VCPU id in a PowerPCCPU object
using the above formula. It is a first step to consolidate all the VCPU id
logic in a single place.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the introduction of VSMT in 2.11, the spacing of VCPU ids
between cores is controllable through a machine property instead
of being only dictated by the SMT mode of the host:
cpu->vcpu_id = (cc->core_id * spapr->vsmt / smp_threads) + i
Until recently, the machine code would try to change the SMT mode
of the host to be equal to VSMT or exit. This allowed the rest of
the code to assume that kvmppc_smt_threads() == spapr->vsmt is
always true.
Recent commit "8904e5a75005 spapr: Adjust default VSMT value for
better migration compatibility" relaxed the rule. If the VSMT
mode cannot be set in KVM for some reasons, but the requested
CPU topology is compatible with the current SMT mode, then we
let the guest run with kvmppc_smt_threads() != spapr->vsmt.
This breaks quite a few places in the code, in particular when
calculating DRC indexes.
This is what happens on a POWER host with subcores-per-core=2 (ie,
supports up to SMT4) when passing the following topology:
-smp threads=4,maxcpus=16 \
-device host-spapr-cpu-core,core-id=4,id=core1 \
-device host-spapr-cpu-core,core-id=8,id=core2
qemu-system-ppc64: warning: Failed to set KVM's VSMT mode to 8 (errno -22)
This is expected since KVM is limited to SMT4, but the guest is started
anyway because this topology can run on SMT4 even with a VSMT8 spacing.
But when we look at the DT, things get nastier:
cpus {
...
ibm,drc-indexes = <0x4 0x10000000 0x10000004 0x10000008 0x1000000c>;
This means that we have the following association:
CPU core device | DRC | VCPU id
-----------------+------------+---------
boot core | 0x10000000 | 0
core1 | 0x10000004 | 4
core2 | 0x10000008 | 8
core3 | 0x1000000c | 12
But since the spacing of VCPU ids is 8, the DRC for core1 points to a
VCPU that doesn't exist, the DRC for core2 points to the first VCPU of
core1 and and so on...
...
PowerPC,POWER8@0 {
...
ibm,my-drc-index = <0x10000000>;
...
};
PowerPC,POWER8@8 {
...
ibm,my-drc-index = <0x10000008>;
...
};
PowerPC,POWER8@10 {
...
No ibm,my-drc-index property for this core since 0x10000010 doesn't
exist in ibm,drc-indexes above.
...
};
};
...
interrupt-controller {
...
ibm,interrupt-server-ranges = <0x0 0x10>;
With a spacing of 8, the highest VCPU id for the given topology should be:
16 * 8 / 4 = 32 and not 16
...
linux,phandle = <0x7e7323b8>;
interrupt-controller;
};
And CPU hot-plug/unplug is broken:
(qemu) device_del core1
pseries-hotplug-cpu: Cannot find CPU (drc index 10000004) to remove
(qemu) device_del core2
cpu 4 (hwid 8) Ready to die...
cpu 5 (hwid 9) Ready to die...
cpu 6 (hwid 10) Ready to die...
cpu 7 (hwid 11) Ready to die...
These are the VCPU ids of core1 actually
(qemu) device_add host-spapr-cpu-core,core-id=12,id=core3
(qemu) device_del core3
pseries-hotplug-cpu: Cannot find CPU (drc index 1000000c) to remove
This patches all the code in hw/ppc/spapr.c to assume the VSMT
spacing when manipulating VCPU ids.
Fixes: 8904e5a750
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Change the macro that generates the vmstate migration field and the needed
function for the spapr-caps to take the full spapr-cap name. This has
the benefit of meaning this instance will be picked up when greping
for the spapr-caps and making it more obvious what this macro is doing.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move necessary stuff in escc.h and update type names.
Remove slavio_serial_ms_kbd_init().
Fix code style problems reported by checkpatch.pl
Update mac_newworld, mac_oldworld and sun4m to use directly the
QDEV interface.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Newer kernels have a htab resize capability when adding or remove
memory. At these situations, the guest kernel might reallocate its
htab to a more suitable size based on the resulting memory.
However, we're not setting the new value back into the machine state
when a KVM guest resizes its htab. At first this doesn't seem harmful,
but when migrating or saving the guest state (via virsh managedsave,
for instance) this mismatch between the htab size of QEMU and the
kernel makes the guest hangs when trying to load its state.
Inside h_resize_hpt_commit, the hypercall that commits the hash page
resize changes, let's set spapr->htab_shift to the new value if we're
sure that kvmppc_resize_hpt_commit were successful.
While we're here, add a "not RADIX" sanity check as it is already done
in the related hypercall h_resize_hpt_prepare.
Fixes: https://github.com/open-power-host-os/qemu/issues/28
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the relevant hooks as required for the MacOS timer calibration and delayed
SR interrupt.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows us to more easily differentiate between the timebase frequency used
to calibrate the MacOS timers and the actual frequency of the hardware clock as
indicated by CUDA_TIMER_FREQ.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[dwg: Revert some extraneous changes which break compile]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We ignore silently the value of smp_threads when we set
the default VSMT value, and if smp_threads is greater than VSMT
kernel is going into trouble later.
Fixes: 8904e5a750
("spapr: Adjust default VSMT value for better migration compatibility")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit bcb5ce08cf ("spapr: Rename machine init functions for clarity")
renamed ppc_spapr_reset to spapr_machine_reset and ppc_spapr_init
to spapr_machine_init. Let's also rename the references in
comments.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Detected by Coverity (CID 1385702). This fixes the recently added hypercall
to let guests properly apply Spectre and Meltdown workarounds.
Fixes: c59704b254 "target/ppc/spapr: Add H-Call H_GET_CPU_CHARACTERISTICS"
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
