Commit Graph

2179 Commits

Author SHA1 Message Date
Salvador Fandino e144a605a6 qemu_set_log_filename: filename argument may be NULL
NULL is a valid log filename used to indicate we want to use stderr
but qemu_set_log_filename (which is called by bsd-user/main.c) was not
handling it correctly.

That also made redundant a couple of NULL checks in calling code which
have been removed.

Signed-off-by: Salvador Fandino <salvador@qindel.com>
Message-Id: <20200123193626.19956-1-salvador@qindel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30 21:33:50 +00:00
Damien Hedde 751b4b7b4b vl: replace deprecated qbus_reset_all registration
Replace deprecated qbus_reset_all by resettable_cold_reset_fn for
the sysbus reset registration.

Apart for the raspi machines, this does not impact the behavior
because:
+ at this point resettable just calls the old reset methods of devices
  and buses in the same order as qdev/qbus.
+ resettable handlers registered with qemu_register_reset are
  serialized; there is no interleaving.
+ eventual explicit calls to legacy reset API (device_reset or
  qdev/qbus_reset) inside this reset handler will not be masked out
  by resettable mechanism; they do not go through resettable api.

For the raspi machines, during the sysbus reset the sd-card is not
reset twice anymore but only once. This is a consequence of switching
both sysbus reset and changing parent to resettable; it detects the
second reset is not needed. This has no impact on the state after
reset; the sd-card reset method only reset local state and query
information from the block backend.

The raspi reset change can be observed by using the following command
(reset will occurs, then do Ctrl-C to end qemu; no firmware is
given here).
qemu-system-aarch64 -M raspi3 \
    -trace resettable_phase_hold_exec \
    -trace qdev_update_parent_bus \
    -trace resettable_change_parent \
    -trace qdev_reset -trace qbus_reset

Before the patch, the qdev/qbus_reset traces show when reset method are
called. After the patch, the resettable_phase_hold_exec show when reset
method are called.

The traced reset order of the raspi3 is listed below. I've added empty
lines and the tree structure.

 +->bcm2835-peripherals reset
 |
 |       +->sd-card reset
 |   +->sd-bus reset
 +->bcm2835_gpio reset
 |      -> dev_update_parent_bus (move the sd-card on the sdhci-bus)
 |      -> resettable_change_parent
 |
 +->bcm2835-dma reset
 |
 |   +->bcm2835-sdhost-bus reset
 +->bcm2835-sdhost reset
 |
 |       +->sd-card (reset ONLY BEFORE BEFORE THE PATCH)
 |   +->sdhci-bus reset
 +->generic-sdhci reset
 |
 +->bcm2835-rng reset
 +->bcm2835-property reset
 +->bcm2835-fb reset
 +->bcm2835-mbox reset
 +->bcm2835-aux reset
 +->pl011 reset
 +->bcm2835-ic reset
 +->bcm2836-control reset
System reset

In both case, the sd-card is reset (being on bcm2835_gpio/sd-bus) then moved
to generic-sdhci/sdhci-bus by the bcm2835_gpio reset method.

Before the patch, it is then reset again being part of generic-sdhci/sdhci-bus.
After the patch, it considered again for reset but its reset method is not
called because it is already flagged as reset.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-11-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30 16:02:05 +00:00
Peter Maydell 760df0d121 * Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
 * virtio-scsi fix (Pan Nengyuan)
 * Tweak Skylake-v3 model id (Kashyap)
 * x86 UCODE_REV support and nested live migration fix (myself)
 * Advisory mode for pvpanic (Zhenwei)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
 uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
 +a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
 myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
 uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
 ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
 =TD0Y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)

# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (58 commits)
  build-sys: clean up flags included in the linker command line
  target/i386: Add the 'model-id' for Skylake -v3 CPU models
  qdev: use object_property_help()
  qapi/qmp: add ObjectPropertyInfo.default-value
  qom: introduce object_property_help()
  qom: simplify qmp_device_list_properties()
  vl: print default value in object help
  qdev: register properties as class properties
  qdev: move instance properties to class properties
  qdev: rename DeviceClass.props
  qdev: set properties with device_class_set_props()
  object: return self in object_ref()
  object: release all props
  object: add object_class_property_add_link()
  object: express const link with link property
  object: add direct link flag
  object: rename link "child" to "target"
  object: check strong flag with &
  object: do not free class properties
  object: add object_property_set_default
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-27 09:44:04 +00:00
Philippe Mathieu-Daudé 4f7f589381 accel: Replace current_machine->accelerator by current_accel() wrapper
We actually want to access the accelerator, not the machine, so
use the current_accel() wrapper instead.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:11 +01:00
zhenwei pi 7dc58deea7 pvpanic: implement crashloaded event handling
Handle bit 1 write, then post event to monitor.

Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.

In advance for extention, add GuestPanicInformation in event message.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:07 +01:00
Richard Henderson 755ee1f301 vl: Only choose enabled accelerators in configure_accelerators
By choosing "tcg:kvm" when kvm is not enabled, we generate
an incorrect warning: "invalid accelerator kvm".

At the same time, use g_str_has_suffix rather than open-coding
the same operation.

Presumably the inverse is also true with --disable-tcg.

Fixes: 28a0961757
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21 14:18:24 -10:00
Richard Henderson a024b09067 vl: Remove useless test in configure_accelerators
The result of g_strsplit is never NULL.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21 14:18:24 -10:00
Richard Henderson 60ee355276 vl: Reduce scope of variables in configure_accelerators
The accel_list and tmp variables are only used when manufacturing
-machine accel, options based on -accel.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21 14:18:24 -10:00
Richard Henderson 7970dc12e9 vl: Remove unused variable in configure_accelerators
The accel_initialised variable no longer has any setters.

Fixes: 6f6e1698a6
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-21 14:18:24 -10:00
Laurent Vivier ddad81bd28 runstate: ignore finishmigrate -> prelaunch transition
Commit 1bd71dce4b tries to prevent a finishmigrate -> prelaunch
transition by exiting at the beginning of the main_loop_should_exit()
function if the state is already finishmigrate.

As the finishmigrate state is set in the migration thread it can
happen concurrently to the function. The migration thread and the
function are normally protected by the iothread mutex and thus the
state should no evolve between the start of the function and its end.

Unfortunately during the function life the lock is released by
pause_all_vcpus() just before the point we need to be sure we are
not in finishmigrate state and if the migration thread is waiting
for the lock it will take the opportunity to change the state
to finishmigrate.

The only way to be sure we are not in the finishmigrate state when
we need is to check the state after the pause_all_vcpus() function.

Fixes: 1bd71dce4b ("runstate: ignore exit request in finish migrate state")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20 09:10:22 +01:00
Thomas Huth c388f408b5 ui: Print available display backends with '-display help'
We already print availabled devices with "-device help", or available
backends with "-netdev help" or "-chardev help". Let's provide a way
for the users to query the available display backends, too.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200108144702.29969-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-14 07:26:36 +01:00
Peter Maydell abd5f8bb95 Fix some uninitialized variable warnings,
some memory leak warnings and update MAINTAINERS file.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl4V/QMSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748jsIP/iYNeDRLcur9XqW2j8MRGS6bhPFQv6jU
 INqEqxkVpdBykcE8IeqNpY8R8tFSvPdzUcYd7n5o752XQNrXXOzsBRT6J2VVLVPG
 /t6sx+yLD78WV/n4w5KWeXHwLv4ZdR7TuZP9slGygc6XiH1PerjCfh/ol3NkqFkI
 wk9zoCL95fMB3KEkmdUrQM1aX/ANlAQNBkgDKFLU+BPZJ7LaAh/4O96ONdNOtz1d
 nJ0TDQ0IaqtrclP1bODh9J72PT2dUFOZca7JfaDiIB0rvRpDyhPV6bjxkPi5Bfoc
 pVeF7Kc2H8wRqhgMDgqQioweQJWzrNWqpyYjQXznKldg2zdq3/ZqPVhPFi1hz81x
 XngPu8LoBCSZtgEdjiHoHFB56SWJ5MBSsQmBMIH/B3iaBaxVM8qFmv0VvpNU1fWx
 /x/5/DmLyQy334Aka5ZRqcat2tD8tAWzvppKzjIT+9QNXpr+n9Kdgkbkv39eJGoe
 2eIxhuhXZDtcmC8lMd1jUoFnaJ5pv34mHgTq/RfHYmXftwPx5wERT8GFUU/bQPCR
 mRtbXEqVl6QPSXdlFKFAV5eIBcPHU7n618+rmXTQqOvTIxV8CzhTV3jByUSX66JW
 PF9U+p4IYG/SrWdYFJH16pcyIPqU87cO8qNd7+HWHiVJvNHc4Yr5nR9I7rL0nZ4Q
 SKkUYkqlfcs3
 =An/0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Fix some uninitialized variable warnings,
some memory leak warnings and update MAINTAINERS file.

# gpg: Signature made Wed 08 Jan 2020 16:02:11 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  vl: fix memory leak in configure_accelerators
  arm/translate-a64: fix uninitialized variable warning
  nbd: fix uninitialized variable warning
  util/module: fix a memory leak
  MAINTAINERS: Update Yuval Shaia's email address

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-13 09:50:48 +00:00
Keith Packard 8de702cb67 semihosting: add qemu_semihosting_console_inc for SYS_READC
Provides a blocking call to read a character from the console using
semihosting.chardev, if specified. This takes some careful command
line options to use stdio successfully as the serial ports, monitor
and semihost all want to use stdio. Here's a sample set of command
line options which share stdio between semihost, monitor and serial
ports:

	qemu \
	-chardev stdio,mux=on,id=stdio0 \
	-serial chardev:stdio0 \
	-semihosting-config enable=on,chardev=stdio0 \
	-mon chardev=stdio0,mode=readline

This creates a chardev hooked to stdio and then connects all of the
subsystems to it. A shorter mechanism would be good to hear about.

Signed-off-by: Keith Packard <keithp@keithp.com>
Message-Id: <20191104204230.12249-1-keithp@keithp.com>
[AJB: fixed up deadlock, minor commit title reword]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-09 11:41:29 +00:00
Chen Qun adb464ff67 vl: fix memory leak in configure_accelerators
The accel_list forgot to free, the asan output:

Direct leak of 16 byte(s) in 1 object(s) allocated from:
    #0 0xffff919331cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
    #1 0xffff913f7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
    #2 0xffff91413d9b in g_strsplit (/lib64/libglib-2.0.so.0+0x73d9b)
    #3 0xaaab42fb58e7 in configure_accelerators /qemu/vl.c:2777
    #4 0xaaab42fb58e7 in main /qemu/vl.c:4121
    #5 0xffff8f9b0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
    #6 0xaaab42fc1dab  (/qemu/build/aarch64-softmmu/qemu-system-aarch64+0x8b1dab)

Indirect leak of 4 byte(s) in 1 object(s) allocated from:
    #0 0xffff919331cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
    #1 0xffff913f7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
    #2 0xffff9141243b in g_strdup (/lib64/libglib-2.0.so.0+0x7243b)
    #3 0xffff91413e6f in g_strsplit (/lib64/libglib-2.0.so.0+0x73e6f)
    #4 0xaaab42fb58e7 in configure_accelerators /qemu/vl.c:2777
    #5 0xaaab42fb58e7 in main /qemu/vl.c:4121
    #6 0xffff8f9b0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
    #7 0xaaab42fc1dab  (/qemu/build/aarch64-softmmu/qemu-system-aarch64+0x8b1dab)

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200108114207.58084-1-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-01-08 16:12:39 +01:00
Peter Maydell 4800819827 * More uses of RCU_READ_LOCK_GUARD (Dave, myself)
* QOM doc improvments (Greg)
 * Cleanups from the Meson conversion (Marc-André)
 * Support for multiple -accel options (myself)
 * Many x86 machine cleanup (Philippe, myself)
 * tests/migration-test cleanup (Juan)
 * PC machine removal and next round of deprecation (Thomas)
 * kernel-doc integration (Peter, myself)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJd+YJGAAoJEL/70l94x66D0YYIAIZpS6i6NYJC8KHCl49fjI7U
 qHDN7MiKYTU+l3i0+iGmQL6XN5ClAY0pXkY5LBFIDpsohHR5f4jdrIKjyvcHzuIM
 gx/NLsiA45/niHYrn/hEo0P7CwGTrrdWL+SVmScnKcwYiBzMO/uYblxlbUBKLPNn
 eGaKQmEkvlUBR9GS6S1+jYg8234ZRZ4+12t5dqqADBQ7Kc0wn6KC5yebIoQxCgVc
 9F5Ezdkl7befrTI7El3EC6aT18bKhIBZIs1PT/hzqzlGFhBuKM7uKDb43Yx8c7XQ
 bk5vzHmblPAgQyK4OETQ+DM745AOk6vBiJZbR9nrDUXWvUkrEXTQZMJKU0FXdlE=
 =hyYX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* More uses of RCU_READ_LOCK_GUARD (Dave, myself)
* QOM doc improvments (Greg)
* Cleanups from the Meson conversion (Marc-André)
* Support for multiple -accel options (myself)
* Many x86 machine cleanup (Philippe, myself)
* tests/migration-test cleanup (Juan)
* PC machine removal and next round of deprecation (Thomas)
* kernel-doc integration (Peter, myself)

# gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (87 commits)
  vga: cleanup mapping of VRAM for non-PCI VGA
  hw/display: Remove "rombar" hack from vga-pci and vmware_vga
  hw/pci: Remove the "command_serr_enable" property
  hw/audio: Remove the "use_broken_id" hack from the AC97 device
  hw/i386: Remove the deprecated machines 0.12 up to 0.15
  hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge
  hw/pci-host/i440fx: Extract the IGD passthrough host bridge device
  hw/pci-host/i440fx: Use definitions instead of magic values
  hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE()
  hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h"
  hw/pci-host/i440fx: Correct the header description
  Fix some comment spelling errors.
  target/i386: remove unused pci-assign codes
  WHPX: refactor load library
  migration: check length directly to make sure the range is aligned
  memory: include MemoryListener documentation and some missing function parameters
  docs: add memory API reference
  memory.h: Silence kernel-doc complaints
  docs: Create bitops.rst as example of kernel-docs
  bitops.h: Silence kernel-doc complaints
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20 11:20:25 +00:00
Markus Armbruster deda497b84 error: Fix -msg timestamp default
-msg parameter "timestamp" defaults to "off" if you don't specify msg,
and to "on" if you do.  Messed up right in commit 5e2ac51917 "add
timestamp to error_report()".  Mostly harmless, because "timestamp" is
the only parameter, so "if you do" is "-msg ''", which nobody does.

Change the default to "off" no matter what.

While there, rename enable_timestamp_msg to error_with_timestamp, and
polish documentation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191010081508.8978-1-armbru@redhat.com>
2019-12-18 08:36:15 +01:00
Paolo Bonzini 11bc4a13d1 kvm: convert "-machine kernel_irqchip" to an accelerator property
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:46 +01:00
Paolo Bonzini 23b0898e44 kvm: convert "-machine kvm_shadow_mem" to an accelerator property
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:27 +01:00
Paolo Bonzini 46472d8232 xen: convert "-machine igd-passthru" to an accelerator property
The first machine property to fall is Xen's Intel integrated graphics
passthrough.  The "-machine igd-passthru" option does not set anymore
a property on the machine object, but desugars to a GlobalProperty on
accelerator objects.

The setter is very simple, since the value ends up in a
global variable, so this patch also provides an example before the more
complicated cases that follow it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:27 +01:00
Paolo Bonzini fe17413247 tcg: add "-accel tcg,tb-size" and deprecate "-tb-size"
-tb-size fits nicely in the new framework for accelerator-specific options.  It
is a very niche option, so insta-deprecate it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:27 +01:00
Paolo Bonzini 12ceaef6ae tcg: convert "-accel threads" to a QOM property
Replace the ad-hoc qemu_tcg_configure with generic code invoking QOM
property getters and setters.  More properties (and thus more valid
-accel suboptions) will be added in the next patches, which will move
accelerator-related "-machine" options to accelerators.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:27 +01:00
Paolo Bonzini fc5cf82621 accel: pass object to accel_init_machine
We will have to set QOM properties before accel_init_machine, based on the
options provided to -accel.  Construct the object outside it so that it
will be possible to iterate on properties between object_new_with_class
and accel_init_machine.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:27 +01:00
Paolo Bonzini 3c75e12ea6 qom: add object_new_with_class
Similar to CPU and machine classes, "-accel" class names are mangled,
so we have to first get a class via accel_find and then instantiate it.
Provide a new function to instantiate a class without going through
object_class_get_name, and use it for CPUs and machines already.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:26 +01:00
Paolo Bonzini 1fff3c206f qom: introduce object_register_sugar_prop
Similar to the existing "-rtc driftfix" option, we will convert some
legacy "-machine" command line options to global properties on accelerators.
Because accelerators are not devices, we cannot use qdev_prop_register_global.
Instead, provide a slot in the generic object_compat_props arrays for
command line syntactic sugar.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:26 +01:00
Paolo Bonzini 8b90f1c5ac vl: warn for unavailable accelerators, clarify messages
So far, specifying an accelerator that was not compiled in did not result
in an error; fix that.

While at it, clarify the mysterious "Back to TCG" message.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:26 +01:00
Paolo Bonzini 6f6e1698a6 vl: configure accelerators from -accel options
Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.

This has a semantic change due to removing merge_lists from -accel.
For example:

- "-accel kvm -accel tcg" all but ignored "-accel kvm".  This is a bugfix.

- "-accel kvm -accel thread=single" ignored "thread=single", since it
  applied the option to KVM.  Now it fails due to not specifying the
  accelerator on "-accel thread=single".

- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
  it will fail due to not specifying the accelerator on "-accel
  thread=single".

Also, "-machine accel" and "-accel" become incompatible.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:26 +01:00
Paolo Bonzini e5db4bd863 vl: introduce object_parse_property_opt
We will reuse the parsing loop of machine_set_property soon for "-accel",
but we do not want the "_" -> "-" conversion since "-accel" can just
standardize on dashes.  We will also add a bunch of legacy option handling
to keep the QOM machine object clean.  Extract the loop into a separate
function, and keep the legacy handling in machine_set_property.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:26 +01:00
Paolo Bonzini 28a0961757 vl: merge -accel processing into configure_accelerators
The next step is to move the parsing of "-machine accel=..." into vl.c,
unifying it with the configure_accelerators() function that has just
been introduced.  This way, we will be able to desugar it into multiple
"-accel" options, without polluting accel/accel.c.

The CONFIG_TCG and CONFIG_KVM symbols are not available in vl.c, but
we can use accel_find instead to find their value at runtime.  Once we
know that the binary has one of TCG or KVM, the default accelerator
can be expressed simply as "tcg:kvm", because TCG never fails to initialize.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:25 +01:00
Paolo Bonzini deda73e89f vl: extract accelerator option processing to a separate function
As a first step towards supporting multiple "-accel" options, push the
late processing of -icount and -accel into a new function, and use
qemu_opts_foreach to retrieve -accel options instead of stashing
them into globals.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:25 +01:00
Paolo Bonzini 7f8b6126e7 vl: move icount configuration earlier
Once qemu_tcg_configure is turned into a QOM property setter, it will not
be able to set a default value for mttcg_enabled.  Setting the default will
move to the TCG instance_init function, which currently runs before "-icount"
is processed.

However, it is harmless to do configure_icount for all accelerators; we will
just fail later if a non-TCG accelerator is selected.  So do that.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:25 +01:00
Thomas Huth 1d4ffe8dc7 Remove the core bluetooth code
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.

I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.

Even worse for the emulated device: When running

 qemu-system-x86_64 -bt device:keyboard

QEMU crashes once you hit a key.

So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.

Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.

Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17 09:01:14 +01:00
Thomas Huth b3e2bb9458 virtfs: Remove the deprecated "-virtfs_synth" option
It's been marked as deprecated since QEMU v4.1, time to remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
2019-12-09 18:00:35 +01:00
Peter Maydell 68d8ef4ec5 TCG Plugins initial implementation
- use --enable-plugins @ configure
   - low impact introspection (-plugin empty.so to measure overhead)
   - plugins cannot alter guest state
   - example plugins included in source tree (tests/plugins)
   - -d plugin to enable plugin output in logs
   - check-tcg runs extra tests when plugins enabled
   - documentation in docs/devel/plugins.rst
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
 KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
 ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
 KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
 Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
 5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
 V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
 =UXR/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging

TCG Plugins initial implementation

  - use --enable-plugins @ configure
  - low impact introspection (-plugin empty.so to measure overhead)
  - plugins cannot alter guest state
  - example plugins included in source tree (tests/plugins)
  - -d plugin to enable plugin output in logs
  - check-tcg runs extra tests when plugins enabled
  - documentation in docs/devel/plugins.rst

# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
  travis.yml: enable linux-gcc-debug-tcg cache
  MAINTAINERS: add me for the TCG plugins code
  scripts/checkpatch.pl: don't complain about (foo, /* empty */)
  .travis.yml: add --enable-plugins tests
  include/exec: wrap cpu_ldst.h in CONFIG_TCG
  accel/stubs: reduce headers from tcg-stub
  tests/plugin: add hotpages to analyse memory access patterns
  tests/plugin: add instruction execution breakdown
  tests/plugin: add a hotblocks plugin
  tests/tcg: enable plugin testing
  tests/tcg: drop test-i386-fprem from TESTS when not SLOW
  tests/tcg: move "virtual" tests to EXTRA_TESTS
  tests/tcg: set QEMU_OPTS for all cris runs
  tests/tcg/Makefile.target: fix path to config-host.mak
  tests/plugin: add sample plugins
  linux-user: support -plugin option
  vl: support -plugin option
  plugin: add qemu_plugin_outs helper
  plugin: add qemu_plugin_insn_disas helper
  plugin: expand the plugin_init function to include an info block
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-30 14:10:32 +00:00
Jens Freimann f3a8505656 qdev/qbus: add hidden device support
This adds support for hiding a device to the qbus and qdev APIs.  The
first user of this will be the virtio-net failover feature but the API
introduced with this patch could be used to implement other features as
well, for example hiding pci devices when a pci bus is powered off.

qdev_device_add() is modified to check for a failover_pair_id
argument in the option string. A DeviceListener callback
should_be_hidden() is added. It can be used by a standby device to
inform qdev that this device should not be added now. The standby device
handler can store the device options to plug the device in at a later
point in time.

One reason for hiding the device is that we don't want to expose both
devices to the guest kernel until the respective virtio feature bit
VIRTIO_NET_F_STANDBY was negotiated and we know that the devices will be
handled correctly by the guest.

More information on the kernel feature this is using:
 https://www.kernel.org/doc/html/latest/networking/net_failover.html

An example where the primary device is a vfio-pci device and the standby
device is a virtio-net device:

A device is hidden when it has an "failover_pair_id" option, e.g.

 -device virtio-net-pci,...,failover=on,...
 -device vfio-pci,...,failover_pair_id=net1,...

Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-2-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 18:55:26 -04:00
Peter Maydell f724de8dde Add Macintosh Quadra 800 machine in hw/m68k
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl23MAESHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748UPQQAIfzpB0KRb7InPFNUgGvShoCwKXQmbZm
 wkYoPdDnzgy3FBdbkFM0YcvvSH7Cnbq1njwaTOp8li+NBBiyZCqbCMBKLOusKqhR
 tlP/vF/Jj+o7pbggS+ruSYTtT0+4Q8T5AKEmWmm6ga+PhpT8kFCL+jC8j5bUTmDX
 0lTGwzANDNjGllP+aS6qhY1j9PEWcUpOWr42hW9ZXhAStsPOSzaV7SAZ2XZKPVJz
 KSdnsCPHJVzF4Ps6QK9iMw8szVGat/fq8UU/9w1o2HkmkTRNRW6vuagxmAG1iheW
 fPSpxNnXtoZqTY/qSP9/mMv8cntOtV5YjA/fAeSBa24vY/JFE/zstOrWUY0yhV2y
 CdllFzd/4duR5EThIatJZ4CE3ye89O4or73706l6fnpCI6+UADbneI+0I6VV0fyJ
 I+BxokoI4IgheYOkxD/oxGVx14Ax5vI+R4DkJ09m2koL9h/mALXKeKjb277sJJA/
 GrRx9ttdCGYp7beD84u38aSvNZ9Cs3foljBIYKH6/GqUY5Hl1FlFPE5cDRa+p/yR
 UA/ZDZ4FnJkyhg6Y5mrE8Fx7dvax+9QapKhPqeC9uEuLvUz8yPquMcICx8ehRnNx
 bl0IISTDZvIJwb8ZzemvWHPz63GfQzD1nJjxLZ8c4Q4XYtktETr45tYJd61vuV8x
 gzf/MzaBXSkX
 =HLjK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' into staging

Add Macintosh Quadra 800 machine in hw/m68k

# gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/q800-branch-pull-request:
  BootLinuxConsoleTest: Test the Quadra 800
  hw/m68k: define Macintosh Quadra 800
  hw/m68k: add a dummy SWIM floppy controller
  hw/m68k: add Nubus macfb video card
  hw/m68k: add Nubus support
  hw/m68k: implement ADB bus support for via
  hw/m68k: add VIA support
  dp8393x: manage big endian bus
  esp: add pseudo-DMA as used by Macintosh
  esp: move get_cmd() post-DMA code to get_cmd_cb()
  esp: move handle_ti_cmd() cleanup code to esp_do_dma().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29 16:27:48 +00:00
Laurent Vivier 8ac919a065 hw/m68k: add Nubus macfb video card
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.

It is accessed as a framebuffer but the color palette can be set.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
2019-10-28 19:06:49 +01:00
Lluís Vilanova 42229a7539 vl: support -plugin option
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
[ cota: s/instrument/plugin ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-10-28 15:12:38 +00:00
Laurent Vivier 1bd71dce4b runstate: ignore exit request in finish migrate state
Trying to reboot a VM while a migration is running can
move to the prelaunch state (because of the reset) while
the runstate is in finish migrate state.
As the logical step after the finish migrate is postmigrate,
this can create an invalid state transition from prelaunch state
to postmigrate state and this raises an error and aborts:

    invalid runstate transition: 'prelaunch' -> 'postmigrate'

As we are not able to manage reset in finish migrate state the
best we can do is to ignore any changes and delay them until
the next state which should be postmigrate and which should allow
this kind of transition.

Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191017101806.3644-1-lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-23 17:50:27 +02:00
Kevin Wolf 3e9297f365 vl: Split off user_creatable_print_help()
Printing help for --object is something that we not only want in the
system emulator, but also in tools that support --object. Move it into a
separate function in qom/object_interfaces.c to make the code accessible
for tools.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-10-14 17:12:48 +02:00
Pavel Dovgalyuk ae25dccb7d replay: finish record/replay before closing the disks
After recent updates block devices cannot be closed on qemu exit.
This happens due to the block request polling when replay is not finished.
Therefore now we stop execution recording before closing the block devices.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-14 17:12:48 +02:00
Pavel Dovgalyuk 2586397544 replay: disable default snapshot for record/replay
This patch disables setting '-snapshot' option on by default
in record/replay mode. This is needed for creating vmstates in record
and replay modes.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-14 17:12:48 +02:00
Antonios Motakis 1a6ed33cc5 9p: Added virtfs option 'multidevs=remap|forbid|warn'
'warn' (default): Only log an error message (once) on host if more than one
device is shared by same export, except of that just ignore this config
error though. This is the default behaviour for not breaking existing
installations implying that they really know what they are doing.

'forbid': Like 'warn', but except of just logging an error this
also denies access of guest to additional devices.

'remap': Allows to share more than one device per export by remapping
inodes from host to guest appropriately. To support multiple devices on the
9p share, and avoid qid path collisions we take the device id as input to
generate a unique QID path. The lowest 48 bits of the path will be set
equal to the file inode, and the top bits will be uniquely assigned based
on the top 16 bits of the inode and the device id.

Signed-off-by: Antonios Motakis <antonios.motakis@huawei.com>
[CS: - Rebased to https://github.com/gkurz/qemu/commits/9p-next
       (SHA1 7fc4c49e91).
     - Added virtfs option 'multidevs', original patch simply did the inode
       remapping without being asked.
     - Updated hash calls to new xxhash API.
     - Updated docs for new option 'multidevs'.
     - Fixed v9fs_do_readdir() not having remapped inodes.
     - Log error message when running out of prefixes in
       qid_path_prefixmap().
     - Fixed definition of QPATH_INO_MASK.
     - Wrapped qpp_table initialization to dedicated qpp_table_init()
       function.
     - Dropped unnecessary parantheses in qpp_lookup_func().
     - Dropped unnecessary g_malloc0() result checks. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
[groug: - Moved "multidevs" parsing to the local backend.
        - Added hint to invalid multidevs option error.
	- Turn "remap" into "x-remap". ]
Signed-off-by: Greg Kurz <groug@kaod.org>
2019-10-10 11:36:05 +02:00
Thomas Huth 3d5e90a50b Disallow colons in the parameter of "-accel"
Everybody who used something like "-machine accel=kvm:tcg" in the past
might be tempted to specify a similar list with the -accel parameter,
too, for example "-accel kvm:tcg". However, this is not how this
options is thought to be used, since each "-accel" should only take care
of one specific accelerator.

In the long run, we really should rework the "-accel" code completely,
so that it does not set "-machine accel=..." anymore internally, but
is completely independent from "-machine". For the short run, let's
make sure that users cannot use "-accel xyz:tcg", so that we avoid
that we have to deal with such cases in the wild later.

Message-Id: <20190930123505.11607-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-10-01 11:54:17 +02:00
Peter Maydell fe066b4848 Various trivial fixes
-----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl1dKK8SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748WhUP93YZ60SfAFhFLkAexO3fJSMzzb02Zvy3
 6Q0UyR56xigESPhlfD3rPtPdMpQRnROtIsS1qWcd6x/ejKINh08xyx1HkWLfMKOn
 F1Cc43AdkSqsuEbIfYVJbL/Yz7H6SnD7B9ghV6B2S+nDnDXGMzObAb6QXUtlnMV+
 4as6pawKOLZiP0zFb+98m1as1gjjuQA/3jrQjWPfF3pzYAaBQPh/pHgDhUSVWjsi
 G7KWu4iljKio15WhhRlzKylhSD8Z4u1OD5x/3pbPnborVnOzvryWQ1hiRQ1feB/h
 NUaWs3A2KcgM54LIZN0dC4APGdPlLohwNhakaZR8EnJD9eik2kRO3JBmzorkSHua
 y0UBpNkjeIR/Cv4ayZv6NtrNFmuEJRRcusPBHg7sg0IBUtd4YdXrfE5d2tcYS3Hu
 WoZaYLME1FmbuByJFs+cQhMw88ISYvGD5PkzfkZuQC9/nM/zd6pJyRCAhgchIkfh
 G5iCtOMK8gs5xZjr22pOx/XYLFRzFsOIsGx3kcHH3vSJVS5K3QYFt2xH47YmQZHk
 1k3wQfc8ePFPFpR2rnWqg+iYbPgl8FpOsEfz4fuPRwBeRGFRRzfkpXLQ2DJww59/
 8pd2UAWgdwrvtimmykfEmTu+LUuZKwNFJNH3KfNputbBqjnv1KkbmsPqnElj3deo
 a7LJ72Z1k4Q=
 =dzAT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Various trivial fixes

# gpg: Signature made Wed 21 Aug 2019 12:19:11 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/display: Compile various display devices as common object
  hw/display/sm501: Remove unused include
  spapr_events: Rewrite a fall through comment
  vl: Rewrite a fall through comment
  target/ppc: Rewrite a fall through comment
  hw/ipmi: Rewrite a fall through comment
  hw/dma/omap_dma: Move switch 'fall through' comment to correct place
  json: Move switch 'fall through' comment to correct place
  hw/net/e1000: Fix erroneous comment
  .gitignore: ignore some vhost-user* related files
  configure: fix sdl detection using sdl2-config
  configure: remove obsoleted $sparc_cpu variable
  misc: fix naming scheme of compatiblity arrays
  test: Use g_strndup instead of plain strndup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21 16:59:22 +01:00
Philippe Mathieu-Daudé 4e8de60623 vl: Rewrite a fall through comment
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:

  vl.c: In function ‘qemu_ref_timedate’:
  vl.c:773:15: error: this statement may fall through [-Werror=implicit-fallthrough=]
    773 |         value -= rtc_realtime_clock_offset;
        |         ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
  vl.c:775:5: note: here
    775 |     case QEMU_CLOCK_VIRTUAL:
        |     ^~~~
  cc1: all warnings being treated as errors

Rewrite the comment using 'fall through' which is recognized by
GCC and static analyzers.

Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20190719131425.10835-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 10:58:25 +02:00
Nicholas Piggin c508bd12f6 i386: use machine class ->wakeup method
Move the i386 suspend_wakeup logic out of the fallback path, and into
the new ->wakeup method.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190722061752.22114-1-npiggin@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21 17:17:39 +10:00
Nicholas Piggin 4b5e06c946 machine: Add wakeup method to MachineClass
Waking from suspend is not logically a machine reset on all machines,
particularly in the paravirtualized case rather than hardware
emulated. The ppc spapr machine for example just invokes hypervisor
to suspend, and expects that call to return with the machine in the
same state (modulo some possible migration and reconfiguration
details).

Implement a machine ->wakeup method and use that if it exists.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190722053215.20808-2-npiggin@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21 17:17:39 +10:00
Peter Maydell 95a9457fd4 Header cleanup patches for 2019-08-13
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl1WleASHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTBBYQALQLzIYb2Zux95bAxoJdhqNuEOGLfxeu
 gx0i0roPe6SBleHozUK+gf7kVYyw7he58n2dZURGqrpqktgZOFcea2a6Dq1rnVw6
 JMJ2Oy7V326bHwJT0Np9rW4n+FHsMQZoAUEHjl9EeGCZfO/zy2aSWPsD8mbcbm0g
 hUW5Jr4+cpm28BCL8I+2HhWFazB6G2IPAF9oEXmNsOM6J1Ho8WGrTAjASe0Il5Yi
 m2B4QWG+4uz77WYnkttnssm41K1S95HYyaKluIVyNwTnsPTN303V/sUj+wdRaooL
 k1O6WqaavGhal7QeRqy+vCpF8m6qLq7NaYCzSCOrrkkuC8TAnpVn7Xmi9qI+vb6O
 kGBpDWhq5wOnphsEhnFvhPZgD+WZo3mwTgW4h0d3UhB6orOTPTMvWKEwFJ1j/O6/
 gntV61o542c9gpZjS133221HRmNjteHF/5/TFzmX/G50sgivJn+WOP87naM2aBAz
 8MW5HatTox+qQqYD4VMUIVnVkguxHDVhFRBunYu0HvZZ1Rud+Lc6Xzi6H4jDlZ81
 vtOmAlMU3dbp97gNvJrAVqV4JIL3puOWbu0MMaQWoG53Kcdfu46LIr57TTg3dw61
 R9e7HSOQjYILChoodwELlyeAsVeZo3IzX9vPX8aw7MoHvneyTUNqtha/rHsLEwsb
 97G19dydGEC6
 =eSUz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
  sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
  sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
  Include sysemu/sysemu.h a lot less
  Clean up inclusion of sysemu/sysemu.h
  numa: Move remaining NUMA declarations from sysemu.h to numa.h
  Include sysemu/hostmem.h less
  numa: Don't include hw/boards.h into sysemu/numa.h
  Include hw/boards.h a bit less
  Include hw/qdev-properties.h less
  Include qemu/main-loop.h less
  Include qemu/queue.h slightly less
  Include hw/hw.h exactly where needed
  Include qom/object.h slightly less
  Include exec/memory.h slightly less
  Include migration/vmstate.h less
  migration: Move the VMStateDescription typedef to typedefs.h
  Clean up inclusion of exec/cpu-common.h
  Include hw/irq.h a lot less
  typedefs: Separate incomplete types and function types
  ide: Include hw/ide/internal a bit less outside hw/ide/
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 14:53:43 +01:00
Markus Armbruster 54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster 2f780b6a91 sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).

Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry.  Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there.  Drop the now
superfluous includes of sysemu/sysemu.h from headers.

Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:53 +02:00