In x86/ACPI world, linux distros are using predictable
network interface naming since systemd v197. Which on
QEMU based VMs results into path based naming scheme,
that names network interfaces based on PCI topology.
With itm on has to plug NIC in exactly the same bus/slot,
which was used when disk image was first provisioned/configured
or one risks to loose network configuration due to NIC being
renamed to actually used topology.
That also restricts freedom to reshape PCI configuration of
VM without need to reconfigure used guest image.
systemd also offers "onboard" naming scheme which is
preferred over PCI slot/topology one, provided that
firmware implements:
"
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
"
that allows to assign user defined index to PCI device,
which systemd will use to name NIC. For example, using
-device e1000,acpi-index=100
guest will rename NIC to 'eno100', where 'eno' is default
prefix for "onboard" naming scheme. This doesn't require
any advance configuration on guest side to com in effect
at 'onboard' scheme takes priority over path based naming.
Hope is that 'acpi-index' it will be easier to consume by
management layer, compared to forcing specific PCI topology
and/or having several disk image templates for different
topologies and will help to simplify process of spawning
VM from the same template without need to reconfigure
guest NIC.
This patch adds, 'acpi-index'* property and wires up
a 32bit register on top of pci hotplug register block
to pass index value to AML code at runtime.
Following patch will add corresponding _DSM code and
wire it up to PCI devices described in ACPI.
*) name comes from linux kernel terminology
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ret in virtio_pmem_resp is a uint32_t variable, which should be assigned
using virtio_stl_p.
The kernel side driver does not guarantee virtio_pmem_resp to be initialized
to zero in advance, So sometimes the flush operation will fail.
Signed-off-by: Wang Liang <wangliangzz@inspur.com>
Message-Id: <20210317024145.271212-1-wangliangzz@126.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that everything is in place, have the nested event loop to monitor
the slave channel. The source in the main event loop is destroyed and
recreated to ensure any pending even for the slave channel that was
previously detected is purged. This guarantees that the main loop
wont invoke slave_read() based on an event that was already handled
by the nested loop.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-7-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A deadlock condition potentially exists if a vhost-user process needs
to request something to QEMU on the slave channel while processing a
vhost-user message.
This doesn't seem to affect any vhost-user implementation so far, but
this is currently biting the upcoming enablement of DAX with virtio-fs.
The issue is being observed when the guest does an emergency reboot while
a mapping still exits in the DAX window, which is very easy to get with
a busy enough workload (e.g. as simulated by blogbench [1]) :
- QEMU sends VHOST_USER_GET_VRING_BASE to virtiofsd.
- In order to complete the request, virtiofsd then asks QEMU to remove
the mapping on the slave channel.
All these dialogs are synchronous, hence the deadlock.
As pointed out by Stefan Hajnoczi:
When QEMU's vhost-user master implementation sends a vhost-user protocol
message, vhost_user_read() does a "blocking" read during which slave_fd
is not monitored by QEMU.
The natural solution for this issue is an event loop. The main event
loop cannot be nested though since we have no guarantees that its
fd handlers are prepared for re-entrancy.
Introduce a new event loop that only monitors the chardev I/O for now
in vhost_user_read() and push the actual reading to a one-shot handler.
A subsequent patch will teach the loop to monitor and process messages
from the slave channel as well.
[1] https://github.com/jedisct1/Blogbench
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-6-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The slave channel is implemented with socketpair() : QEMU creates
the pair, passes one of the socket to virtiofsd and monitors the
other one with the main event loop using qemu_set_fd_handler().
In order to fix a potential deadlock between QEMU and a vhost-user
external process (e.g. virtiofsd with DAX), we want to be able to
monitor and service the slave channel while handling vhost-user
requests.
Prepare ground for this by converting the slave channel to be a
QIOChannelSocket. This will make monitoring of the slave channel
as simple as calling qio_channel_add_watch_source(). Since the
connection is already established between the two sockets, only
incoming I/O (G_IO_IN) and disconnect (G_IO_HUP) need to be
serviced.
This also allows to get rid of the ancillary data parsing since
QIOChannelSocket can do this for us. Note that the MSG_CTRUNC
check is dropped on the way because QIOChannelSocket ignores this
case. This isn't a problem since slave_read() provisions space for
8 file descriptors, but affected vhost-user slave protocol messages
generally only convey one. If for some reason a buggy implementation
passes more file descriptors, no need to break the connection, just
like we don't break it if some other type of ancillary data is
received : this isn't explicitely violating the protocol per-se so
it seems better to ignore it.
The current code errors out on short reads and writes. Use the
qio_channel_*_all() variants to address this on the way.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-5-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-4-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Some message types, e.g. VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG,
can convey file descriptors. These must be closed before returning
from slave_read() to avoid being leaked. This can currently be done
in two different places:
[1] just after the request has been processed
[2] on the error path, under the goto label err:
These path are supposed to be mutually exclusive but they are not
actually. If the VHOST_USER_NEED_REPLY_MASK flag was passed and the
sending of the reply fails, both [1] and [2] are performed with the
same descriptor values. This can potentially cause subtle bugs if one
of the descriptor was recycled by some other thread in the meantime.
This code duplication complicates rollback for no real good benefit.
Do the closing in a unique place, under a new fdcleanup: goto label
at the end of the function.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-3-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
slave_read() checks EAGAIN when reading or writing to the socket
fails. This gives the impression that the slave channel is in
non-blocking mode, which is certainly not the case with the current
code base. And the rest of the code isn't actually ready to cope
with non-blocking I/O.
Just drop the checks everywhere in this function for the sake of
clarity.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210312092212.782255-2-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Both functions don't check the personality of the interface (legacy or
modern) before accessing the configuration memory and always use
virtio_config_readX()/virtio_config_writeX().
With this patch, they now check the personality and in legacy mode
call virtio_config_readX()/virtio_config_writeX(), otherwise call
virtio_config_modern_readX()/virtio_config_modern_writeX().
This change has been tested with virtio-mmio guests (virt stretch/armhf and
virt sid/m68k) and virtio-pci guests (pseries RHEL-7.3/ppc64 and /ppc64le).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210314200300.3259170-1-laurent@vivier.eu>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FreeBSD 12.1 has reached end of life. Use 12.2 instead so that FreeBSD's
project's packages will work. Update which timezone to pick. Work around a QEMU
bug that incorrectly raises an exception on a CRC32 instruction with the FPU
disabled. The qemu bug is described here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg784158.html
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210307155654.993-2-imp@bsdimp.com>
[thuth: Disable gnutls to work-around a problem with libtasn1]
Signed-off-by: Thomas Huth <thuth@redhat.com>
sun is a macro on these systems, thus renaming the variables on the
client and server.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqzHPG5ezqY-YxbA+tMoadA3VDFWBX8_LaLC5YsQOMrz+A@mail.gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
local directive make the configure fails on these systems.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqy95D8X-QvBcEfL=a-Rkgy6aJtheskkqZwQkreru+T_Wg@mail.gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When building qemu with GCC 11, test-block-iothread produces the following
warning:
../tests/unit/test-block-iothread.c:148:11: error: ‘buf’ may be used
uninitialized [-Werror=maybe-uninitialized]
This is caused by buf[512] left uninitialized and passed to
bdrv_save_vmstate() that expects a const uint8_t *, so the compiler
assumes it will be read and expects the parameter to be initialized.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210319112218.49609-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the recent move of the unit tests to tests/unit directory some
instructions under the "Unit tests" section became imprecise, which
are fixed by this change.
Fixes: da668aa15b ("tests: Move unit tests into a separate directory")
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210318174407.2299930-1-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Policy "crash" calls abort() when deprecated input is received.
Bugs in integration tests may mask the error from policy "reject".
Provide a larger hammer: crash outright. Masking that seems unlikely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-12-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
Without this stub, the next commit fails to link. I suspect the real
cause is 947e47448d "monitor: Use getter/setter functions for
cur_mon".
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-9-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command query-qmp-schema:
suppress information on deprecated commands, events and object type
members, i.e. anything that has the special feature flag "deprecated".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-8-armbru@redhat.com>
QMP commands return their response as a generated QAPI type, which the
monitor core converts to JSON via QObject.
query-qmp-schema's response is the generated introspection data. This
is a QLitObject since commit 7d0f982bfb "qapi: generate a literal
qobject for introspection", v2.12). Before, it was a string. Instead
of converting QLitObject / string -> QObject -> QAPI type
SchemaInfoList -> QObject -> JSON, we take a shortcut: the command is
'gen': false, so it can return the QObject instead of the QAPI type.
Slightly simpler and more efficient.
The next commit will filter the response for output policy, and this
is easier in the SchemaInfoList representation. Drop the shortcut.
This replaces the manual command registration by a generated one. The
manual registration makes the command available before the machine is
built by passing flag QCO_ALLOW_PRECONFIG. To keep it available
there, we need need to add 'allow-preconfig': true to its definition
in the schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-7-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP event data: suppress
deprecated members.
No QMP event data is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-6-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP events: suppress
deprecated ones.
No QMP event is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-5-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
libqemuutil has two definitions of qemu_set_fd_handler. This
is not needed since the only users of the function are
qemu-io.c and the emulators, both of which already include
util/main-loop.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <d0c5aa88-029e-4328-7a53-482a3010c5f8@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210318155519.1224118-2-armbru@redhat.com>
Clean up the writes to the configuration space and the PM region, and
rename the test to lpc-ich9-test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Almost all QOM type names consist only of letters, digits, '-', '_',
and '.'. Just two contain ':': "qemu:memory-region" and
"qemu:iommu-memory-region". Neither can be plugged with -object.
Rename them to "memory-region" and "iommu-memory-region".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-3-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate
-drive with bogus interface type" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-5-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The previous commit rendered the name fdctrl_connect_drives() somewhat
misleading. Get rid of it by inlining the (now pretty simple)
function into its only caller.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-4-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Drop the crap deprecated in commit 4a27a638e7 "fdc: Deprecate
configuring floppies with -global isa-fdc" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-3-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Commit 4a27a638e7 "fdc: Deprecate configuring floppies with -global
isa-fdc" actually deprecated any use of floppy controller driver
properties, not just with -global. Correct the deprecation note
accordingly.
Fixes: 4a27a638e7
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-2-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
qemu-fuzz-i386-target-generic-fuzz-sdhci-v3 uses -drive=sd where it
should use -drive if=none instead. This prints a deprecation warning:
$ ./build-oss-fuzz/DEST_DIR/qemu-fuzz-i386-target-generic-fuzz-sdhci-v3 -runs=1 -seed=1
[ASan warnings snipped...]
--> i386: -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive: warning: bogus if=sd is deprecated, use if=none
INFO: Seed: 1
[More normal output snipped...]
Support for this usage will be gone soon. Adjust the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210319132008.1830950-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some compiler versions are smart enough to detect a potentially
uninitialized variable, but are not smart enough to detect that this
cannot happen due to the code flow:
../hw/intc/i8259.c: In function ‘pic_read_irq’:
../hw/intc/i8259.c:203:13: error: ‘irq2’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
203 | irq = irq2 + 8;
| ~~~~^~~~~~~~~~
Restrict irq2 variable use to the inner statement.
Fixes: 78ef2b6989 ("i8259: Reorder intack in pic_read_irq")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210318163059.3686596-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM doesn't fully support Hyper-V reenlightenment notifications on
migration. In particular, it doesn't support emulating TSC frequency
of the source host by trapping all TSC accesses so unless TSC scaling
is supported on the destination host and KVM_SET_TSC_KHZ succeeds, it
is unsafe to proceed with migration.
KVM_SET_TSC_KHZ is called from two sites: kvm_arch_init_vcpu() and
kvm_arch_put_registers(). The later (intentionally) doesn't propagate
errors allowing migrations to succeed even when TSC scaling is not
supported on the destination. This doesn't suit 're-enlightenment'
use-case as we have to guarantee that TSC frequency stays constant.
Require 'tsc-frequency=' command line option to be specified for successful
migration when re-enlightenment was enabled by the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210319123801.1111090-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even the name of this section is 'cpu/msr_hyperv_hypercall',
'hypercall_hypercall' is clearly a typo.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318160249.1084178-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
env->error_code is only 32-bits wide, so the high 32 bits of EXITINFO1
are being lost. However, even though saving guest state and restoring
host state must be delayed to do_vmexit, because they might take tb_lock,
it is always possible to write to the VMCB. So do this for the exit
code and EXITINFO1, just like it is already being done for EXITINFO2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we have added help support for object_add, the help is
printed on stdout. Switch to qemu_printf so that it goes to
the monitor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- QAPIfy object-add and --object
- stream: Fail gracefully if permission is denied
- storage-daemon: Fix crash on quit when job is still running
- curl: Fix use after free
- char: Deprecate backend aliases, fix QMP query-chardev-backends
- Fix image creation option defaults that exist in both the format and
the protocol layer (e.g. 'cluster_size' in qcow2 and rbd; the qcow2
default was incorrectly applied to the rbd layer)
-----BEGIN PGP SIGNATURE-----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=zZCm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches and object-add QAPIfication
- QAPIfy object-add and --object
- stream: Fail gracefully if permission is denied
- storage-daemon: Fix crash on quit when job is still running
- curl: Fix use after free
- char: Deprecate backend aliases, fix QMP query-chardev-backends
- Fix image creation option defaults that exist in both the format and
the protocol layer (e.g. 'cluster_size' in qcow2 and rbd; the qcow2
default was incorrectly applied to the rbd layer)
# gpg: Signature made Fri 19 Mar 2021 09:18:22 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
vl: allow passing JSON to -object
qom: move user_creatable_add_opts logic to vl.c and QAPIfy it
tests: convert check-qom-proplist to keyval
qom: Support JSON in HMP object_add and tools --object
char: Simplify chardev_name_foreach()
char: Deprecate backend aliases 'tty' and 'parport'
char: Skip CLI aliases in query-chardev-backends
qom: Add user_creatable_parse_str()
hmp: QAPIfy object_add
qemu-img: Use user_creatable_process_cmdline() for --object
qom: Add user_creatable_add_from_str()
qemu-nbd: Use user_creatable_process_cmdline() for --object
qemu-io: Use user_creatable_process_cmdline() for --object
qom: Factor out user_creatable_process_cmdline()
qom: Remove user_creatable_add_dict()
qemu-storage-daemon: Implement --object with qmp_object_add()
qom: Make "object" QemuOptsList optional
qapi/qom: QAPIfy object-add
qapi/qom: Add ObjectOptions for x-remote-object
qapi/qom: Add ObjectOptions for input-*
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the ObjectOption code that was added in the previous patch to
enable passing JSON to -object. Even though we cannot yet add
non-scalar properties with the human-friendly comma-separated syntax,
they can now be added as JSON.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-4-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emulators are currently using OptsVisitor (via user_creatable_add_opts)
to parse the -object command line option. This has one extra feature,
compared to keyval, which is automatic conversion of integers to lists
as well as support for lists as repeated options:
-object memory-backend-ram,id=pc.ram,size=1048576000,host-nodes=0,policy=bind
So we cannot replace OptsVisitor with keyval right now. Still, this
patch moves the user_creatable_add_opts logic to vl.c since it is
not needed anywhere else, and makes it go through user_creatable_add_qapi.
In order to minimize code changes, the predicate still takes a string.
This can be changed later to use the ObjectType QAPI enum directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-3-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The command-line creation test is using QemuOpts. Switch it to keyval,
since the emulator has some special needs and thus the last user of
user_creatable_add_opts will go away with the next patch.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-2-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support JSON for --object in all tools and in HMP object_add in the same
way as it is supported in qobject_input_visitor_new_str().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210312131921.421023-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Igor Mammedov
Wang Liang
Greg Kurz
Laurent Vivier
Peter Maydell
Warner Losh
David CARLIER
Emanuele Giuseppe Esposito
Wainer dos Santos Moschetta
Markus Armbruster
Paolo Bonzini
Philippe Mathieu-Daudé
Vitaly Kuznetsov
Kevin Wolf