Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Supervisor Mode Execution Prevention (SMEP) and
Supervisor Mode Access Prevention (SMAP) for x86. The purpose of the
patch, obviously, is to help kernel developers debug the support for
those features.
A fair bit of the code relates to the handling of CPUID features. The
CPUID code probably would get greatly simplified if all the feature
bit words were unified into a single vector object, but in the
interest of producing a minimal patch for SMEP/SMAP, and because I had
very limited time for this project, I followed the existing style.
[ v2: don't change the definition of the qemu64 CPU shorthand, since
that breaks loading old snapshots. Per Anthony Liguori this can be
fixed once the CPU feature set is snapshot.
Change the coding style slightly to conform to checkpatch.pl. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
target-i386: move tcg initialization into x86_cpu_initfn()
cleanup cpu_set_debug_excp_handler
target-xtensa: drop usage of prev_debug_excp_handler
target-i386: drop usage of prev_debug_excp_handler
MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.
This patch:
- moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
- stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
- uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP
patch is based on Jan Kiszka's proposal:
http://thread.gmane.org/gmane.comp.emulators.qemu/100806
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().
Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In order to make cpu object not depended on external ad-hoc
initialization routines, move tcg initialization from cpu_x86_init
inside cpu object "x86_cpu_initfn()".
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Chains of exception handlers are currently unused feature, drop it
for now so as not to expose prev_debug_excp_handler at global
scope when moving tcg initialization into target-i386/cpu.c
Later we probably could re-invent better interface for this.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
In commit 1bba0dc932 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Turn cpu_init macro into a static inline function returning CPUX86State
for backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Allows to use cpu_reset() in place of cpu_state_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Commit de024815e3 (target-i386: QOM'ify
CPU init) moved mce_init() call from helper.c:cpu_x86_init() into
X86CPU's cpu.c:x86_cpu_initfn().
mce_init() checks for a family >= 6 though, so we could end up with a
sequence such as for -cpu somecpu,family=6:
x86_cpu_initfn => X86CPU::family == 5
mce_init => no-op
cpu_x86_register => X86CPU::family = 6
=> MCE unexpectedly not init'ed
or for -cpu someothercpu,family=5:
x86_cpu_initfn => X86CPU::family == 6
mce_init => init'ed
cpu_x86_register => X86CPU::family = 5
=> MCE unexpectedly init'ed
Therefore partially revert the above commit. To avoid moving
mce_init() back into helper.c, foresightedly move it into a
new x86_cpu_realize() function and, in lack of ObjectClass::realize,
call it directly from cpu_x86_init().
While at it, move the qemu_init_vcpu() call that used to follow
mce_init() in cpu_x86_init() into the new realizefn as well.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Avoids an x86_env_get_cpu() call there, to work with QOM properties.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Move code from cpu_x86_init() to new QOM x86_cpu_initfn().
Also move mce_init() to cpu.c since it's used nowhere else.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed CPUX86State as first member of X86CPU.
Distinguish between "x86_64-cpu" and "i386-cpu".
Drop cpu_x86_close() in favor of calling object_delete() directly.
For now let CPUClass::reset() call cpu_state_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Scripted conversion:
sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc]
sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
This was a long pending bug, now revealed by the assert in
phys_page_find that stumbled over the large page index returned by
cpu_get_phys_page_debug for NX-marked pages: We need to mask out NX and
all user-definable bits 52..62 from PDEs and the final PTE to avoid
corrupting physical addresses.
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'upstream' of git://qemu.weilnetz.de/qemu:
Move definition of HOST_LONG_BITS to qemu-common.h
target-xtensa: Clean includes
target-unicore32: Clean includes
target-sh4: Clean includes
target-s390x: Clean includes
target-ppc: Clean includes
target-mips: Clean includes
target-microblaze: Clean includes
target-m68k: Clean includes
target-lm32: Clean includes
target-i386: Clean includes
target-cris: Clean includes
target-arm: Clean includes
target-alpha: Clean includes
Remove macro HOST_LONG_SIZE
This will allow the APIC core to file a TPR access report. Depending on
the accelerator and kernel irqchip mode, it will either be delivered
right away or queued for later reporting.
In TCG mode, we can restart the triggering instruction and can therefore
forward the event directly. KVM does not allows us to restart, so we
postpone the delivery of events recording in the user space APIC until
the current instruction is completed.
Note that KVM without in-kernel irqchip will report the address after
the instruction that triggered the access.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
apic id returned to guest kernel in ebx for cpuid(function=1) depends on
CPUX86State->cpuid_apic_id which gets populated after the cpuid information
is cached in the host kernel. This results in broken CPU topology in guest.
Fix this by setting cpuid_apic_id before cpuid information is passed to
the host kernel. This is done by moving the setting of cpuid_apic_id
to cpu_x86_init() where it will work for both KVM as well as TCG modes.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bharata B Rao <bharata.rao@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's needed for its default value - bit 0 specifies that "rep movs" is
good enough for memcpy, and Linux may use a slower memcpu if it is not set,
depending on cpu family/model.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that target-i386 uses softfloat, floatx80 is always available and
there is no need anymore to have code handling both float64 and floax80.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use CPU_LDoubleU in cpu_dump_state() instead of redefining a union for
doing the conversion.
Based on a patch from Laurent Vivier <laurent@vivier.eu>.
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Conforming to the Intel spec, set the power-on value of PAT also on
reset, but save it across INIT.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This switches KVM's MCE injection path to cpu_x86_inject_mce, both for
SIGBUS and monitor initiated events. This means we prepare the MCA MSRs
in the VCPUState also for KVM.
We have to drop the MSRs writeback restrictions for this purpose which
is now safe as every uncoordinated MSR injection is removed with this
patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We will use the current TCG-only MCE injection path for KVM as well, and
then this read-modify-write of the target VCPU state has to be performed
synchronously in the corresponding thread.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Allow to tell cpu_x86_inject_mce that it should ignore Action Optional
MCE events when the target VCPU is still processing another one. This
will be used by KVM soon.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As this service is used by the human monitor, make sure that errors get
reported to the right channel, and also raise the verbosity.
This requires to move Monitor typedef in qemu-common.h to resolve the
include dependency.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When broadcasting MCEs, we need to set MCIP and RIPV in mcg_status like
it is done for KVM. Use the symbolic constants at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Introduce the cpu_dump_state flag CPU_DUMP_CODE and implement it for
x86. This writes out the code bytes around the current instruction
pointer. Make use of this feature in KVM to help debugging fatal vm
exits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add function for checking whether current CPU support mca broadcast.
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When the following test case is injected with mce command, maybe user could not
get the expected result.
DATA
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Expected Result
panic type: "Fatal Machine check"
That is because each mce command can only inject the given cpu and could not
inject mce interrupt to other cpus. So user will get the following result:
panic type: "Fatal machine check on current CPU"
"broadcast" option is used for injecting dummy data into other cpus. Injecting
mce with this option the expected result could be gotten.
Usage:
Broadcast[on]
command broadcast cpu bank status mcg_status addr misc
(qemu) mce -b 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Broadcast[off]
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Clean up cpu_inject_x86_mce() for later patch.
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Only bits 8..23 of the segment flags contain valid data, so only dump
those when printing the CPU state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Port qemu-kvm's
commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef
Author: Huang Ying <ying.huang@intel.com>
Date: Mon Sep 21 10:43:25 2009 +0800
MCE: Relay UCR MCE to guest
UCR (uncorrected recovery) MCE is supported in recent Intel CPUs,
where some hardware error such as some memory error can be reported
without PCC (processor context corrupted). To recover from such MCE,
the corresponding memory will be unmapped, and all processes accessing
the memory will be killed via SIGBUS.
For KVM, if QEMU/KVM is killed, all guest processes will be killed
too. So we relay SIGBUS from host OS to guest system via a UCR MCE
injection. Then guest OS can isolate corresponding memory and kill
necessary guest processes only. SIGBUS sent to main thread (not VCPU
threads) will be broadcast to all VCPU threads as UCR MCE.
aliguori: fix build
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Port qemu-kvm's MCE support
commit c68b2374c9048812f488e00ffb95db66c0bc07a7
Author: Huang Ying <ying.huang@intel.com>
Date: Mon Jul 20 10:00:53 2009 +0800
Add MCE simulation support to qemu/kvm
KVM ioctls are used to initialize MCE simulation and inject MCE. The
real MCE simulation is implemented in Linux kernel. The Kernel part
has been merged.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This fixes a regression of 0e26b7b892: Reset halted also on INIT.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With argument checking for cpu_fprintf, gcc throws this warning:
CC i386-softmmu/helper.o
cc1: warnings being treated as errors
/qemu/ar7/target-i386/helper.c: In function ‘cpu_x86_dump_seg_cache’:
/qemu/ar7/target-i386/helper.c:220: error: format not a string literal and no format arguments
The code is correct, but current gcc versions don't detect this.
Therefore the patch rewrites the statement to satisfy the compiler.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
about half of target-i386/helper.c consist of CPUID related functions.
Only one of them is a real TCG helper function. So move the whole
CPUID stuff out of this into a separate file to get better
maintainable parts.
This is only code reordering and should not affect QEMU's
functionality.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If you make use of hw breakpoints on a 32bit x86 linux host, qemu
will segmentation fault when processing the exception.
The problem is that the value of env is stored in $ebp in the op_helper
raise_exception() function, and it can have the wrong value when
calling it from non generated code.
It is possible to work around the problem by restoring the value of
env before calling raise_exception() using a new helper function that
takes (CPUState *) as one of the arguments.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
helper.o(.text+0x11e0): In function `listflags':
/src/qemu/target-i386/helper.c:661: warning: sprintf() is often misused, please use snprintf()
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Initialize KVM paravirt cpuid leaf and allow user to control guest
visible PV features through -cpu flag.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now, if we inject a fatal MCE into guest OS, for example Linux, Linux
will go panic and then reboot. But if we inject another MCE now,
system will reset directly instead of go panic firstly, because
MCG_STATUS.MCIP is set to 1 and not cleared after reboot. This is does
not follow the behavior in real hardware.
This patch fixes this via set env->mcg_status to 0 during system reset.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The CPUID features QEMU presented to the guest were not up-to-date
with QEMU's emulated feature set.
Add the missing bits of recent (and not so recent) additions to
QEMU's emulation engine.
For stability reasons only the user mode usable bits are exposed for
now, features like Monitor or CR8LEG are left out.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The multicore CPUID code detects whether the guest is an Intel or an
AMD CPU, because the Linux kernel is picky about the CmpLegacy bit.
KVM by default passes through the host's vendor, which was not
catched by the code. So fork out the vendor determining bits into a
separate function to be used from both places and always get the real
vendor.
This fixes KVM's multicore setup on Intel CPUs.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is absolutely no need to call reset functions when initializing
devices. Since we are already registering them, calling qemu_system_reset()
should suffice. Actually, it is what happens when we reboot the machine,
and using the same process instead of a special case semantics will even
allow us to find bugs easier.
Furthermore, the fact that we initialize things like the cpu quite early,
leads to the need to introduce synchronization stuff like qemu_system_cond.
This patch removes it entirely. All we need to do is call qemu_system_reset()
only when we're already sure the system is up and running
I tested it with qemu (with and without io-thread) and qemu-kvm, and it
seems to be doing okay - although qemu-kvm uses a slightly different patch.
[ v2: user mode still needs cpu_reset, so put it in ifdef. ]
[ v3: leave qemu_system_cond for now. ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
mce_banks is always MCE_BANKS_DEF * 4 in size, value never change
CC: Huang Ying <ying.huang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes the savevm code correct, and sign extensins gives us exactly
what we need (namely, sign extend to 64 bits when used with 64bit addresess.
Once there, change 0x100000 for 1 << 20, that maks all a20 use the same syntax.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Direct call to kvm_arch_get_registers() bypass logic in
cpu_synchronize_state()
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In addition to the TCG based qemu64 type let's introduce a kvm64 CPU type,
which is the least common denominator of all KVM-capable x86-CPUs
(based on Intel Pentium 4 Prescott). It can be used as a base type
for migration.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The CPUID level determines how many CPUID leafs are exposed to the guest.
Some features (like multi-core) cannot be propagated without the proper
level, but guests maybe confused by bogus entries in some leafs.
So add level= and xlevel= to the list of -cpu options to allow the user to
override the default settings. While at it, merge unnecessary local
variables into one and allow hexadecimal arguments.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Controlled by the enhanced -smp option set the CPUID bits to present the
guest the desired topology. This is vendor specific, but (with the exception
of the CMP_LEGACY bit) not conflicting, so we set all bits everytime.
There is no real multithreading support for AMD CPUs, so report cores
instead.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Intel CPUs store the number of cores in CPUID leaf 4. So push
the maxleaf value to 4 to allow the guests access to this leaf.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since we recently do not disable 3DNOW! support anymore, we should
avoid setting the bits in the default qemu64 CPU model to ease
migration. TCG does not support it anyway and even AMD deprecates
it's usage nowadays.
If you want to use it in KVM, use the phenom, athlon or host CPU
model.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to set segment registers via gdb also in system emulation
mode. Basic sanity checks are applied and nothing is changed if they
fail. But screwing up the target via this interface will never be
complicated, so I avoided being too paranoid here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.
aliguori: fix build for linux-user
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KVM provides an in-kernel feature to disable CPUID bits that are not
present in the current host. So there is no need here to duplicate this
work. Additionally allows 3DNow! on capable processors, since the
restriction seems to apply to QEMU/TCG only.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If we want to trim the user provided CPUID bits for KVM to be not greater
than that of the host, we should not remove the bits _after_ we sent
them to the kernel.
This fixes the masking of features that are not present on the host by
moving the trim function and it's call from helper.c to kvm.c.
It helps to use -cpu host.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although the guest's CPUID bits can be controlled in a fine grained way
in QEMU, a simple way to inject the host CPU is missing. This is handy
for KVM desktop virtualization, where one wants the guest to support the
full host feature set.
Introduce another CPU type called 'host', which will propagate the host's
CPUID bits to the guest. Unwanted bits can still be turned off by using
the existing syntax (-cpu host,-skinit)
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KVM defaults to the hypervisor CPUID bit to be set, whereas pure
QEMU clears it. On some occasions one wants to set or clear it the
other way round (for instance to get HyperV running inside a guest).
Move the bit-set to be done before the command line parsing and
enable it by default. One can disable it by using: -cpu qemu64,-hypervisor
Fix some whitespace damage on the way.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should fix compilation problem in case of CONFIG_USER_ONLY.
Currently INIT/SIPI is handled in the context of CPU that sends IPI.
This patch changes this to handle them like all other events in a main
cpu exec loop. When KVM will gain thread per vcpu capability it will
be much more clear to handle those event by cpu thread itself and not
modify one cpu's state from the context of the other.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As per the IA32 processor manual, the accessed bit is set to 1 in the
processor state after reset. qemu pc cpu_reset code was missing this
accessed bit setting.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KVM-enabled QEMU will always report the vendor ID of the physical CPU it is
running on. Allow to override this if explicitly requested on the
command line. It will not suffice to name a CPU type (like -cpu phenom),
but you have to explicitly set the vendor: -cpu phenom,vendor=AuthenticAMD
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include assert.h from qemu-common.h and remove other direct uses.
cpu-all.h still need to include it because of the dyngen-exec.h hacks
Signed-off-by: Paul Brook <paul@codesourcery.com>
Remove cpu features that are not supported by kvm from the cpuid features
reported to the guest.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU allows adding or removing cpu features by using the syntax '-cpu +feature'
or '-cpu -feature'. Some cpuid features cause more than one bit to be set or
cleared; but QEMU stops after just one bit has been modified, causing the
feature bits to be inconsistent.
Fix by allowing all feature bits corresponding to a given name to be set.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Parse the descriptor flags that segment registers refer to and show the
result in a more human-friendly format. The output of info registers eg.
then looks like this:
[...]
ES =007b 00000000 ffffffff 00cff300 DPL=3 DS [-WA]
CS =0060 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0068 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
DS =007b 00000000 ffffffff 00cff300 DPL=3 DS [-WA]
FS =0000 00000000 00000000 00000000
GS =0033 b7dd66c0 ffffffff b7dff3dd DPL=3 DS [-WA]
LDT=0000 00000000 00000000 00008200 DPL=0 LDT
TR =0080 c06da700 0000206b 00008900 DPL=0 TSS32-avl
[...]
Changes in this version:
- refactoring so that only a single helper is used for dumping the
segment descriptor cache
- tiny typo fixed that broke 64-bit segment type names
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7179 c046a42c-6fe2-441c-8c8c-71466251a162
Peter Maydell
H. Peter Anvin
Blue Swirl
Igor Mammedov
Andreas Färber
Jan Kiszka
Stefan Weil
Bharata B Rao
Avi Kivity
Anthony Liguori
Alexandre Raymond
Aurelien Jarno
Jan Kiszka
Jin Dongming
Stefan Weil
Marcelo Tosatti
Paul Brook
Andre Przywara
Jason Wessel
john cooper
Gleb Natapov
Huang Ying
Glauber Costa
Juan Quintela
malc
Nitin A Kamble
aliguori
blueswir1