This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.
Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.
This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Eliminate direct access to nd_table[] and nb_nics by processing the the
Xen and ISA NICs first and then calling pci_init_nic_devices() for the
rest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is a follow-up on commit 89965db43c "hw/isa/piix3: Avoid Xen-specific
variant of piix3_write_config()" which introduced
piix_intx_routing_notifier_xen(). This function is implemented in board code but
accesses the PCI configuration space of the PIIX ISA function to determine the
PCI interrupt routes. Avoid this by reusing pci_device_route_intx_to_irq() which
makes piix_intx_routing_notifier_xen() more device-agnostic.
One remaining improvement would be making piix_intx_routing_notifier_xen()
agnostic towards the number of PCI interrupt routes and move it to xen-hvm.
This might be useful for possible Q35 Xen efforts but remains a future exercise
for now.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240107231623.5282-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It's been marked as deprecated since QEMU 8.0, so it should be fine
to remove this now.
Message-ID: <20240118103759.130748-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With common function to add virtio in DSDT created now, update microvm
code also to use it instead of duplicate code.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The sgx_epc_get_section stub is reachable from cpu_x86_cpuid. It
should not assert, instead it should just return true just like
the "real" sgx_epc_get_section does when SGX is disabled.
Reported-by: Vladimír Beneš <vbenes@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20220201190941.106001-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231221031652.119827-32-richard.henderson@linaro.org>
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
-----BEGIN PGP SIGNATURE-----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=TA1/
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu into staging
* Add compat machines for QEMU 9.0
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY
# Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm
# QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs
# 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx
# KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj
# lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA
# s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s
# pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL
# TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK
# QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7
# FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I
# +VpInjUaPBQ=
# =TA1/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Dec 2023 04:36:11 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu:
tests/unit/test-qmp-event: Replace fixture by global variables
tests/unit/test-qmp-event: Simplify event emission check
tests/unit/test-qmp-event: Drop superfluous mutex
tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode
qemu-options: Clarify handling of commas in options parameters
tests/qtest/migration-test: Fix analyze-migration.py for s390x
qom/object: Limit type names to alphanumerical and some few special characters
tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name
memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name
hw: Replace anti-social QOM type names (again)
docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl"
target: Restrict 'sysemu/reset.h' to system emulation
hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header
hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header
hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header
system/qtest: Restrict QTest API to system emulation
system/qtest: Include missing 'hw/core/cpu.h' header
MAINTAINERS: Add some more vmware-related files to the corresponding section
hw: Add compat machines for 9.0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
`kvm_enabled()` is compiled down to `0` and short-circuit logic is
used to remove references to undefined symbols at the compile stage.
Some build configurations with some compilers don't attempt to
simplify this logic down in some cases (the pattern appears to be
that the literal false must be the first term) and this was causing
some builds to emit references to undefined symbols.
An example of such a configuration is clang 16.0.6 with the following
configure: ./configure --enable-debug --without-default-features
--target-list=x86_64-softmmu --enable-tcg-interpreter
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Message-Id: <20231119203116.3027230-1-dhoff749@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To support Xen guests using the Q35 chipset, the unplug protocol needs
to also remove AHCI disks.
Make pci_xen_ide_unplug() more generic, iterating over the children
of the PCI device and destroying the "ide-hd" devices. That works the
same for both AHCI and IDE, as does the detection of the primary disk
as unit 0 on the bus named "ide.0".
Then pci_xen_ide_unplug() can be used for both AHCI and IDE devices.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The default NIC creation seems a bit hackish to me. I don't understand
why each platform has to call pci_nic_init_nofail() from a point in the
code where it actually has a pointer to the PCI bus, and then we have
the special cases for things like ne2k_isa.
If qmp_device_add() can *find* the appropriate bus and instantiate
the device on it, why can't we just do that from generic code for
creating the default NICs too?
But that isn't a yak I want to shave today. Add a xenbus field to the
PCMachineState so that it can make its way from pc_basic_device_init()
to pc_nic_init() and be handled as a special case like ne2k_isa is.
Now we can launch emulated Xen guests with '-nic user'.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
When the Xen guest asks to unplug *emulated* NICs, it's kind of unhelpful
also to unplug the peer of the *Xen* PV NIC.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The primary console is special because the toolstack maps a page into
the guest for its ring, and also allocates the guest-side event channel.
The guest's grant table is even primed to export that page using a known
grant ref#. Add support for all that in emulated mode, so that we can
have a primary console.
For reasons unclear, the backends running under real Xen don't just use
a mapping of the well-known GNTTAB_RESERVED_CONSOLE grant ref (which
would also be in the ring-ref node in XenStore). Instead, the toolstack
sets the ring-ref node of the primary console to the GFN of the guest
page. The backend is expected to handle that special case and map it
with foreignmem operations instead.
We don't have an implementation of foreignmem ops for emulated Xen mode,
so just make it map GNTTAB_RESERVED_CONSOLE instead. This would probably
work for real Xen too, but we can't work out how to make real Xen create
a primary console of type "ioemu" to make QEMU drive it, so we can't
test that; might as well leave it as it is for now under Xen.
Now at last we can boot the Xen PV shim and run PV kernels in QEMU.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is kind of redundant since without being able to get these through
some other method (HVMOP_get_param) the guest wouldn't be able to access
XenStore in order to find them.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
... in order to advertise the XEN_HVM_CPUID_UPCALL_VECTOR feature,
which will come in a subsequent commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paul Durrant <paul@xen.org>
A previous implementation of this stuff used a 64-bit field for all of
the port information (vcpu/type/type_val) and did atomic exchanges on
them. When I implemented that in Qemu I regretted my life choices and
just kept it simple with locking instead.
So there's no need for the XenEvtchnPort to be so simplistic. We can
use a union for the pirq/virq/interdomain information, which lets us
keep a separate bit for the 'remote domain' in interdomain ports. A
single bit is enough since the only possible targets are loopback or
qemu itself.
So now we can ditch PORT_INFO_TYPEVAL_REMOTE_QEMU and the horrid
manual masking, although the in-memory representation is identical
so there's no change in the saved state ABI.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
-----BEGIN PGP SIGNATURE-----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=/Du0
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231106' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmVI+bIACgkQUaNDx8/7
# 7KHW4g/9FmgX0k2Elm1BAul3slJtuBT8/iHKfK19rhXICxhxS5xBWJA8FmosTWAT
# 91YqQJhOHARxLd9VROfv8Fq8sAo+Ys8bP3PTXh5satjY5gR9YtmMSVqvsAVLn7lv
# a/0xp7wPJt2UeKzvRNUqFXNr7yHPwxFxbJbmmAJbNte8p+TfE2qvojbJnu7BjJbg
# sTtS/vFWNJwtuNYTkMRoiZaUKEoEZ8LnslOqKUjgeO59g4i3Dq8e2JCmHANPFWUK
# cWmr7AqcXgXEnLSDWTtfN53bjcSCYkFVb4WV4Wv1/7hUF5jQ4UR0l3B64xWe0M3/
# Prak3bWOM/o7JwLBsgaWPngXA9V0WFBTXVF4x5qTwhuR1sSV8MxUvTKxI+qqiEzA
# FjU89oSZ+zXId/hEUuTL6vn1Th8/6mwD0L9ORchNOQUKzCjBzI4MVPB09nM3AdPC
# LGThlufsZktdoU2KjMHpc+gMIXQYsxkgvm07K5iZTZ5eJ4tV5KB0aPvTZppGUxe1
# YY9og9F3hxjDHQtEuSY2rzBQI7nrUpd1ZI5ut/3ZgDWkqD6aGRtMme4n4GsGsYb2
# Ht9+d2RL9S8uPUh+7rV8K/N3+vXgXRaEYTuAScKtflEbA7YnZA5nUdMng8x0kMTQ
# Y73XCd4UGWDfSSZsgaIHGkM/MRIHgmlrfcwPkWqWW9vF+92O6Hw=
# =/Du0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:35:30 HKT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231106' of https://github.com/legoater/qemu: (22 commits)
vfio/common: Move vfio_host_win_add/del into spapr.c
vfio/spapr: Make vfio_spapr_create/remove_window static
vfio/container: Move spapr specific init/deinit into spapr.c
vfio/container: Move vfio_container_add/del_section_window into spapr.c
vfio/container: Move IBM EEH related functions into spapr_pci_vfio.c
util/uuid: Define UUID_STR_LEN from UUID_NONE string
util/uuid: Remove UUID_FMT_LEN
vfio/pci: Fix buffer overrun when writing the VF token
util/uuid: Add UUID_STR_LEN definition
hw/pci: modify pci_setup_iommu() to set PCIIOMMUOps
test: Add some tests for range and resv-mem helpers
virtio-iommu: Consolidate host reserved regions and property set ones
virtio-iommu: Implement set_iova_ranges() callback
virtio-iommu: Record whether a probe request has been issued
range: Introduce range_inverse_array()
virtio-iommu: Introduce per IOMMUDevice reserved regions
util/reserved-region: Add new ReservedRegion helpers
range: Make range_compare() public
virtio-iommu: Rename reserved_regions into prop_resv_regions
vfio: Collect container iova range info
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
-----BEGIN PGP SIGNATURE-----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=RAb0
-----END PGP SIGNATURE-----
Merge tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory protocol driver.
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmVI81IACgkQUrHW6VHQ
# zgdzTgv+I5eV2R01YLOBBJhBjzxZ4/BUqkuUHNxHpfjuCqEIzPb7FIfoZ4ZyXZFT
# YJdSE4lPeTZLrmmi/Nt6G0rUKDvdCeIgkS2VLHFSsTV8IzcT71BTRGzV0zAjUF5v
# yDH6uzo6e9gmaziIalRjibUxSDjCQmoCifms2rS2DwazADudUp+naGfm+3uyA0gM
# raOfBfRkNZsDqhXg2ayuqPIES75xQONoON9xYPKDAthS48POEbqtWBKuFopr3kXY
# y0eph+NAw+RajCyLYKM3poIgaSu3l4WegInuKQffzqKR8dxrbwPdCmtgo6NSHx0W
# uDfl7FUBnGzrR18VU4ZfTSrF5SVscGwF9EL7uocJen15inJjl1q3G53uZgyGzHLC
# cw8fKMjucmE8njQR2qiMyX0b+T4+9nKO1rykBgTG/+c9prRUVoxYpFCF117Ei0U8
# QzLGACW1oK+LV41bekWAye7w9pShUtFaxffhPbJeZDDGh7q0x61R3Z3yKkA07p46
# /YWWFWUD
# =RAb0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:08:18 HKT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu:
MAINTAINERS: Add an entry for Hyper-V Dynamic Memory Protocol
hw/i386/pc: Support hv-balloon
qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query command
qapi: Add query-memory-devices support to hv-balloon
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) hot-add support
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) base
Add Hyper-V Dynamic Memory Protocol definitions
memory-device: Drop size alignment check
Revert "hw/virtio/virtio-pmem: Replace impossible check by assertion"
memory-device: Support empty memory devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We support only 3- and 4-level page-tables, which is firstly checked in
vtd_decide_config(), then setup in vtd_init(). Than level fields are
checked by vtd_is_level_supported().
So here we can't have level out from 1..4 inclusive range. Let's assert
it. That also explains Coverity that we are not going to overflow the
array.
CID: 1487158, 1487186
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-2-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary plumbing for the hv-balloon driver to the PC machine.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
The xen_evtchn_soft_reset() function requires the iothread mutex, but is
also called for the EVTCHNOP_reset hypercall. Ensure the mutex is taken
in that case.
Cc: qemu-stable@nongnu.org
Fixes: a15b10978f ("hw/xen: Implement EVTCHNOP_reset")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
When fire_watch_cb() found the response buffer empty, it would call
deliver_watch() to generate the XS_WATCH_EVENT message in the response
buffer and send an event channel notification to the guest… without
actually *copying* the response buffer into the ring. So there was
nothing for the guest to see. The pending response didn't actually get
processed into the ring until the guest next triggered some activity
from its side.
Add the missing call to put_rsp().
It might have been slightly nicer to call xen_xenstore_event() here,
which would *almost* have worked. Except for the fact that it calls
xen_be_evtchn_pending() to check that it really does have an event
pending (and clear the eventfd for next time). And under Xen it's
defined that setting that fd to O_NONBLOCK isn't guaranteed to work,
so the emu implementation follows suit.
This fixes Xen device hot-unplug.
Cc: qemu-stable@nongnu.org
Fixes: 0254c4d19d ("hw/xen: Add xenstore wire implementation and implementation stubs")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The refcounts actually correspond to 'active_ref' structures stored in a
GHashTable per "user" on the backend side (mostly, per XenDevice).
If we zero map_track[] on reset, then when the backend drivers get torn
down and release their mapping we hit the assert(s->map_track[ref] != 0)
in gnt_unref().
So leave them in place. Each backend driver will disconnect and reconnect
as the guest comes back up again and reconnects, and it all works out OK
in the end as the old refs get dropped.
Cc: qemu-stable@nongnu.org
Fixes: de26b26197 ("hw/xen: Implement soft reset for emulated gnttab")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
A guest which has configured the per-vCPU upcall vector may set the
HVM_PARAM_CALLBACK_IRQ param to fairly much anything other than zero.
For example, Linux v6.0+ after commit b1c3497e604 ("x86/xen: Add support
for HVMOP_set_evtchn_upcall_vector") will just do this after setting the
vector:
/* Trick toolstack to think we are enlightened. */
if (!cpu)
rc = xen_set_callback_via(1);
That's explicitly setting the delivery to GSI#1, but it's supposed to be
overridden by the per-vCPU vector setting. This mostly works in Qemu
*except* for the logic to enable the in-kernel handling of event channels,
which falsely determines that the kernel cannot accelerate GSI delivery
in this case.
Add a kvm_xen_has_vcpu_callback_vector() to report whether vCPU#0 has
the vector set, and use that in xen_evtchn_set_callback_param() to
enable the kernel acceleration features even when the param *appears*
to be set to target a GSI.
Preserve the Xen behaviour that when HVM_PARAM_CALLBACK_IRQ is set to
*zero* the event channel delivery is disabled completely. (Which is
what that bizarre guest behaviour is working round in the first place.)
Cc: qemu-stable@nongnu.org
Fixes: 91cce75617 ("hw/xen: Add xen_evtchn device for event channel emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
* Avoid recompiling libfdt in the FreeBSD VM
* Mark old pc machine types as deprecated
* Force IPv4 in the ipmi-bt-test
-----BEGIN PGP SIGNATURE-----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=A6CT
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-10-27' of https://gitlab.com/thuth/qemu into staging
* Fix global variable shadowing in test code
* Avoid recompiling libfdt in the FreeBSD VM
* Mark old pc machine types as deprecated
* Force IPv4 in the ipmi-bt-test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmU7g+wRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWzIQ//WkiEtXAB4zn/b8H0KfRF283FoFMstBPu
# xrF90WcXMidAPRK8iFhwlae0rVyo40V6A3+/0rntMZ6WPJ3pVvFhmM4zIQgX+1+F
# HT8To7ngngeEey5gJNbOs9GdAFSmF8HwB+HWnEGf2fjWsUvIWgm458ikPUWvhXaJ
# 08wH4V+bmEAKYgny8/ys70E1iFeMwfg+LKXHzVAavaQ8GjM9xFXOjRe8XEq2P7/8
# T99O+hn1iGJfrvZTdJ01awRuOUzA1YTKLCYNSzfRc/j0eYwI28CBm12/sZn4dUA8
# 4rV33ISPw55QmxdVLCfGhAJ6Ih0trOgf8eDBkhcgqWt26ymcKyVL/7kJHcuoY9Q2
# onaN3XT39lVz/HmcuTl9a0sePsZd4d7p0vRsccwTSisX8RpLDab8I8oU8Nvs3VQG
# t23K3XLrdSyMbxsbi9b5BdXJVgkz4irEKG1dX8laIGMGD5zVi/LX2BWjP6QaIOZi
# OyopRQN2uTi6cry5NmblpeLDNJwQdQVxJKlqcvDQQl8TjPXleNtIXL4dr+IpNC5T
# Uo8GJ6+b+AzUI4EaNFybVDPAYHFMJKxvN/QUEjExKV1QTP3V2V9jCbGCF8nio8pp
# ISo11Lo/Z4Z39NwDBH13UuSOdD1rlrU2uuq6LaiRTBfCOTYumzUMvlDTNYqGuSLr
# +1q1GTGsHO0=
# =A6CT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 27 Oct 2023 18:33:32 JST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-10-27' of https://gitlab.com/thuth/qemu:
ipmi-bt-test: force ipv4
tests/vm/freebsd: Add additional library paths for libfdt
docs/about: Mark the old pc-i440fx-2.0 - 2.3 machine types as deprecated
tests/coroutine: Clean up global variable shadowing
tests/aio: Clean up global variable shadowing
tests/npcm7xx_adc: Clean up global variable shadowing
tests/rtl8139: Clean up global variable shadowing
tests/cdrom-test: Clean up global variable shadowing in prepare_image()
tests/virtio-scsi: Clean up global variable shadowing
tests/throttle: Clean up global variable shadowing
system/qtest: Clean up global variable shadowing in qtest_server_init()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As we've seen in the past, it's useful for deprecating old machine
types to finally be able to get of legacy code or do other clean-ups
(see e.g. commit ea985d235b that was used to drop the PCI code in
the 128k bios binaries to free some precious space in those binaries).
So let's continue deprecating the oldest pc machine types. QEMU 2.3
has been released 8 years ago, so that's plenty of time since such
machine types have been used by default, thus deprecating pc-i440fx-2.0
up to pc-i440fx-2.3 should be fine nowadays.
Message-ID: <20231006075247.403364-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This was introduced in KVM in Linux 2.6.33, we can require it
unconditionally. KVM_CLOCK_TSC_STABLE was only added in Linux 4.9,
for now do not require it (though it would allow the removal of some
pretty yucky code).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
=ILek
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A generic X86IOMMUClass->int_remap function should not return VT-d
specific values; fix it to return 0 if the interrupt was successfully
translated or -EINVAL if not.
The VTD_FR_IR_xxx values are supposed to be used to actually raise
faults through the fault reporting mechanism, so do that instead for
the case where the IRQ is actually being injected.
There is more work to be done here, as pretranslations for the KVM IRQ
routing table can't fault; an untranslatable IRQ should be handled in
userspace and the fault raised only when the IRQ actually happens (if
indeed the IRTE is still not valid at that time). But we can work on
that later; we can at least raise faults for the direct case.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <31bbfc9041690449d3ac891f4431ec82174ee1b4.camel@infradead.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a simple _DSM call support for the ACPI0017 device to return fake QTG
ID values of 0 and 1 in all cases. This for _DSM plumbing testing from the OS.
Following edited for readability
Device (CXLM)
{
Name (_HID, "ACPI0017") // _HID: Hardware ID
...
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
If ((Arg0 == ToUUID ("f365f9a6-a7de-4071-a66a-b40c0b4f8e52")))
{
If ((Arg2 == Zero))
{
Return (Buffer (One) { 0x01 })
}
If ((Arg2 == One))
{
Return (Package (0x02)
{
One,
Package (0x02)
{
Zero,
One
}
})
}
}
}
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231012125623.21101-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_get_device_memory_range() finds the device memory size by calculating the
difference between maxram and ram sizes. This calculation makes sense only when
maxram is greater than the ram size. Make sure we check for that before calling
pc_get_device_memory_range().
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231011105335.42296-1-anisinha@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU's PIIX3 implementation actually models the real PIIX4, but with different
PCI IDs. Usually, guests deal just fine with it. Still, in order to provide a
more consistent illusion to guests, allow QEMU's PIIX4 implementation to be used
in the PC machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-30-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the PC machine, the PIT is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-22-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the PC machine, the PIC is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-21-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the PIIX3 and PIIX4 device models are sufficiently prepared, their
implementations can be merged into one file for further consolidation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-20-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The power management controller is an integral part of PIIX3 (function 3). So
create it as part of the south bridge.
Note that the ACPI function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-14-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The USB controller is an integral part of PIIX3 (function 2). So create
it as part of the south bridge.
Note that the USB function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-13-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IDE controller is an integral part of PIIX3 (function 1). So create it as
part of the south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-12-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bui Quang Minh
David Woodhouse
Greg Kurz
Peter Maydell
Bernhard Beschow
Thomas Huth
Sunil V L
Stefan Hajnoczi
Paolo Bonzini
Richard Henderson
Cornelia Huck
Cédric Le Goater
Daniel Hoffman
Kevin Wolf
Vladimir Sementsov-Ogievskiy
Maciej S. Szmigiero
Yi Liu
Dave Jiang
Ani Sinha