MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.
This fixes a MIPS Jazz regression introduced in c658b94f6e.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an assigned device is initialized it copies the device config
space into the emulated config space. Unfortunately multifunction is
setup prior to the device initfn and gets clobbered. We need to
restore it just like pci-assign does.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":
(1) a fw_cfg file is removed with this patch. This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.
(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.
The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).
The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.
Thus keep the code simple, and pretend it was never broken.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.
SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.
The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Peter Lieven
# Via Juan Quintela
* quintela/migration.next:
migration: drop MADVISE_DONT_NEED for incoming zero pages
Message-id: 1384878412-23521-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-ia64-17:
tcg-ia64: Introduce tcg_opc_bswap64_i
tcg-ia64: Introduce tcg_opc_ext_i
tcg-ia64: Introduce tcg_opc_movi_a
tcg-ia64: Introduce tcg_opc_mov_a
tcg-ia64: Use A3 form of logical operations
tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction
tcg-ia64: Use ADDS for small addition
tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu
tcg-ia64: Move AREG0 to R32
tcg-ia64: Simplify brcond
tcg-ia64: Handle constant calls
tcg-ia64: Use shortcuts for nop insns
tcg-ia64: Use TCGMemOp within qemu_ldst routines
Message-id: 1384811395-7097-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSif5+AAoJECgfDbjSjVRpHNAH/RQO8v2FYOQ7opGhOqzMwXwR
lbsaeaNtHUVV1MHeFtww04Oslp8tdsvcKq4ORGu38sG60dKHSZjdLnrsJCOKeEO/
3Luqx5kAJabSKDPHhYc+sZqQPx2aZT0s16bXuDyWXe+IEPpwO6e39VI7J+ulJjyI
VdDWqumusGtyqFoXri4SS5pcPVowfgKQFhJIkzXfcmzNAT0rXP87CYe1gl9W19rc
aD5VxHXdMvB7wfJAdtGzpc/MuEDG/MgCiUqgiLvC5zM0JUTmdPwgBGl56Er01BZ9
Rudeg8LXi/nhL1rZuQaNK1AnL/jg4mjKByLw5nQjjxPN9Hj0J6Zh4Asu5eYlS3w=
=c2GL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc last minute fixes for 1.8
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Amos Kong (1) and Igor Mammedov (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
doc: fix hardcoded helper path
pc: disable pci-info
Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=Dvpg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block fixes for 1.7.0
# gpg: Signature made Fri 15 Nov 2013 09:51:25 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Max Reitz (3) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
block: Fail if requested driver is not available
MAINTAINERS: add block driver sub-maintainers
qemu-img: Fix overwriting 'ret' before using
qemu-iotests: Test qcow2 count_contiguous_clusters()
qcow2: fix possible corruption when reading multiple clusters
qmp: access the local QemuOptsLists for drive option
MAINTAINERS: add block tree repo URLs
qemu-iotests: Extend 041 for unbacked mirroring
block/drive-mirror: Check for NULL backing_hd
qapi-schema: Update description for NewImageMode
block: Print its file name if backing file opening failed
Message-id: 1384537999-5972-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Amos Kong (1) and Sebastian Huber (1)
# Via Stefan Hajnoczi
* stefanha/net:
virtio-net: fix the memory leak in rxfilter_notify()
smc91c111: Fix receive starvation
Message-id: 1384532032-19057-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=6SSx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream-1.7' into staging
Patch queue for ppc - 2013-11-08
These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.
# gpg: Signature made Thu 07 Nov 2013 07:34:54 PM PST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
# By Alexey Kardashevskiy
# Via Alexander Graf
* agraf/tags/signed-ppc-for-upstream-1.7:
pseries: Update SLOF firmware image
spapr: add vio-bus devices to categories
Message-id: 1383881766-13958-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The madvise for zeroed out pages was introduced when every transferred
zero page was memset to zero and thus allocated. Since commit
211ea740 we check for zeroness of a target page before we memset
it to zero. Additionally we memmap target memory so it is essentially
zero initialized (except for e.g. option roms and bios which are loaded
into target memory although they shouldn't).
It was reported recently that this madvise causes a performance degradation
in some situations. As the madvise should only be called rarely and if it's called
it is likely on a busy page (it was non-zero and changed to zero during migration)
drop it completely.
Reported-By: Zhang Haoyu <haoyu.zhang@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Save the result of the call to object_get_canonical_path()
so we can free it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids each test needing to add it to suppress windows popping up.
[Commit 7ceeedd016 ("blockdev-test: add
test case for drive_add duplicate IDs") and commit
43cd209803 ("qdev-monitor-test: add
device_add leak test cases") added qtest tests without specifying
-display none.
As a result, "make check" now tries to use graphics (GTK or SDL). Since
graphics are not used by the test and inappropriate for headless "make
check" runs, add the missing -display none.
This fixes "make check" in the QEMU buildbot.
-- Stefan]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
object_get_canonical_path() returns a gchar*, it should be freed by the
caller.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.
DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Being able to "extend" from 64-bits (with a mov) simplifies
a few places where the conditional breaks the train of thought.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can and/or/xor/andcm small constants, saving one cycle.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can subtract from more small constants that just 0 with one insn,
and we can add the negative for most small constants.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoids a wasted cycle loading up small constants.
Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since the move away from the global areg0, we're no longer globally
reserving areg0. Which means our use of R7 clobbers a call-saved
register. Shift areg0 into the windowed registers. Indeed, choose
the incoming parameter register that it comes to us by.
This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare. This lead to
the usage of an extra bundle in which to perform the compare. The extra
bundle left room for constants to be loaded for use with the compare insn.
If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants. At which point we
can eliminate half the function by not handling them.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits. By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's no need to go through the full opcode-to-insn function call
to generate nops. This makes the source a bit more readable.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
$(PYTHON) is a Make variable which is set by configure.
In all other places over the tree, .py files are run from
Makefiles using this variable, except of a single leftover
in hw/i386/Makefile.obj (and a nearby place in there uses
$(PYTHON) correctly). Fix this leftover too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by:: Stefan Weil <sw@weilnetz.de>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.
Following patch changes the command so it works with systemd, upstart and SysV
With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
shutdown -P +0 "..."
shutdown -H +0 "..."
shutdown -r +0 "..."
SysV equivalents for these are:
shutdown -h -P +0 "..."
shutdown -h -H +0 "..."
shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.
According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
shutdown -p +0 "..."
shutdown -h +0 "..."
shutdown -r +0 "..."
shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format
Signed-off-by: Michael Avdienko <whitearchey@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a number of contributors who maintain block drivers (image
formats and protocols). They should be listed in the MAINTAINERS file
so that get_maintainer.pl lists them.
Note that commits are still merged through Kevin or Stefan's block tree
but the block driver sub-maintainers are usually the ones to review
patches.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jeff Cody <jcody@redhat.com>
Acked-by: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch moves ret assignment after reporting original error.
We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.
In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.
In the other if branch, currently the output error is always -4:
strerror(-4) -> Unknown error -4
Added regression test in case 048.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
In case the smc91c111 interface signals that it cannot receive more
packets the packets are queued and further reception will be disabled.
In case the interface is again ready to receive packets notify the upper
layer.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if multiple sectors spanning multiple clusters are read the
function count_contiguous_clusters should ensure that the
cluster type should not change between the clusters.
Especially the for-loop should break when we have one
or more normal clusters followed by a compressed cluster.
Unfortunately the wrong macro was used in the mask to
compare the flags.
This was discovered while debugging a data corruption
issue when converting a compressed qcow2 image to raw.
qemu-img reads 2MB chunks which span multiple clusters.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to execute the QMP "drive-mirror" command in
"none" sync mode and "absolute-paths" mode even for block devices
lacking a backing file.
"absolute-paths" does in fact not require a backing file to be present,
as can be seen from the "top" sync mode code path. "top" basically
states that the device should indeed have a backing file - however, the
current code catches the case if it doesn't and then simply treats it as
"full" sync mode, creating a target image without a backing file (in
"absolute-paths" mode). Thus, "absolute-paths" does not imply the target
file must indeed have a backing file.
Therefore, the target file may be left unbacked in case of "none" sync
mode as well, if the specified device is not backed either. Currently,
qemu will crash trying to dereference the backing file pointer since it
assumes that it will always be non-NULL in that case ("none" with
"absolute-paths").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
