most of MEMORY_foo defines are not shared
with ASL anymore and are used only inside of
memory_hotplug_acpi_table.c, so move them
there and make them strings. As result we
can replace stringify(MEMORY_foo) with just
MEMORY_foo, which makes code a bit cleaner.
No AML change introduced by this patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition remove no longer needed acpi-dsdt-mem-hotplug.dsl.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
before consolidating memhp code in memory_hotplug_acpi_table.c
and for simplifying review, first factor out memhp code into
new function build_memory_devices() in i386/acpi-build.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
----
PS:
no functional change, only code movement.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
move remnants of MHPD device from DSDT into SSDT.
i.e. Device(MHPD), _UID, _HID
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI specification (minimally versions 1.0b through 6.0) define the
FADT.CENTURY field as:
The RTC CMOS RAM index to the century of data value (hundred and
thousand year decimals). If this field contains a zero, then the RTC
centenary feature is not supported. If this field has a non-zero value,
then this field contains an index into RTC RAM space that OSPM can use
to program the centenary field.
The x86 targets generate ACPI payload, emulate an RTC
(CONFIG_MC146818RTC), and that RTC supports the "centenary feature" (see
occurrences of RTC_CENTURY in cmos_ioport_write() and cmos_ioport_read()
in "hw/timer/mc146818rtc.c".)
However, FADT.CENTURY is left at zero currently:
[06Ch 0108 1] RTC Century Index : 00
which -- according to analysis done by Ruiyu Ni at Intel -- should cause
Linux and Windows 8+ to think the RTC centenary feature is unavailable,
and cause Windows 7 to (incorrectly) assume that the offset to use is
constant 0x32. (0x32 happens to be the right value on QEMU, but Windows 7
is wrong to assume anything at all).
Exposing the right nonzero offset in FADT.CENTURY informs Linux and
Windows 8+ about the right capabilities of the hardware, plus it retrofits
our FADT to Windows 7's behavior.
Regression tested with the following guests (all UEFI installs):
- i386 Q35: Fedora 21 ("Fedlet" edition)
- x86_64:
- i440fx:
- Fedora 21
- RHEL 6 and 7
- Windows 7 and 10
- Windows Server 2008 R2 and 2012 R2
- Q35:
- Fedora 22
- Windows 8.1
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard Henderson <rth@twiddle.net> (maintainer:X86)
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
it allows to express ShiftRight(A,B,C) syntax
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
it allows to express following ASL expression:
Add(arg1, arg2, result)
usecases that do not need to store result
should pass NULL as 3rd arg that would express
Add(arg1, arg2,)
construct.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info
- MEM DEV structure, it has the @handle which is used to associate specified
ACPI NVDIMM device we will introduce in later patch.
Also we can happily ignored the memory device's interleave, the real
nvdimm hardware access is hidden behind host
- DCR structure, it defines vendor ID used to associate specified vendor
nvdimm driver. Since we only implement PMEM mode this time, Command
window and Data window are not needed
The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1
It is disabled on default
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let build_header() support specified OEM table id so that we can build
multiple SSDT later
If the oem table id is not specified (aka, NULL), we use the default id
instead as the previous behavior
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add pc-i440fx-2.6 and pc-q35-2.6 machine classes.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Remove the redundant 'alias = NULL' and 'is_default = 0' lines
from older machine-types. pc_*_2_4_machine_options() already
clear those fields, so they don't need to be cleared by
pc_*_2_3_machine_options().
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Only old machine types which don't use the acpi builder (qemu 1.7 + older)
have to load that file for proper acpi support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The field is not used for anything.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Add bus property to PC machines and use it when looking
for primary PCI root bus (bus 0).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
A generic PCI Bus Expander doesn't necessary have a built-in PCI bridge.
Int this case the ACPI will include IO/MEM ranges per device. Try to merge
adjacent resources to reduce the ACPI tables length.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The property is read-only and not used for anything.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
enforce_aligned_dimm never changes after the machine is
initialized, so it can be simply set in PCMachineClass like all
the other compat fields.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we don't need code in pc_compat_*() functions to set the legacy
acpi_data_size value.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way we can set legacy_acpi_table_size on the machine_options()
functions, instead of requirng code in pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way the compat flags can be initialized in the machine_options()
function. This will help us to eventually eliminate the pc_compat_*()
functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add serialized method support so that explicit Mutex can be
avoided
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Read callbacks are now only invoked at item selection, before any
data is read. As such, the value of the offset argument passed to
the callback will always be 0. Also, the two callback instances
currently in use both leave their offset argument unused.
This patch removes the offset argument from the fw_cfg read callback
prototype, and from the currently available instances. The unused
(write) callback prototype is also removed (write support was removed
earlier, in commit 023e3148).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that qemu_hw_version() returns a fixed "2.5+" string instead
of QEMU_VERSION, we don't need to set hw_version on pc-*-2.5
explicitly.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in
c6bd8c706, or have snuck in since. Nuke them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
[Indentation tidied up, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
In this case we can get the same error from fopen(), so just use
strerror and errno there---which actually improves the error
message most of the time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commit 317b0a6d8 fixed an issue which caused by the outdated
env->tsc value, but the fix lead to 'cpu_synchronize_all_states()'
called twice during live migration. The 'cpu_synchronize_all_states()'
takes about 130us for a VM which has 4 vcpus, it's a bit expensive.
Synchronize the whole CPU context just for updating env->tsc is too
wasting, this patch use a new function to update the env->tsc.
Comparing to 'cpu_synchronize_all_states()', it only takes about 20us.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1446695464-27116-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 2012, QEMU had a bug where it exposed QEMU version information to the
guest, meaning a QEMU upgrade would expose different hardware to the
guest OS even if the same machine-type is being used.
The bug was fixed by commit 93bfef4c6e, on
all machines up to pc-1.0. But we kept introducing the same bug on all
newer machines since then. That means we are breaking guest ABI every
time QEMU was upgraded.
Fix this by setting the hw_version on all PC machines, making sure the
hardware won't change when upgrading QEMU.
Note that QEMU_VERSION was "1.0" in QEMU 1.0, but starting on QEMU
1.1.0, it started following the "x.y.0" pattern. We have to follow it,
to make sure we use the right QEMU_VERSION string from each QEMU
release.
The 2.5 machine classes could have hw_version unset, because the default
value for qemu_get_version() is QEMU_VERSION. But I decided to set it
explicitly to QEMU_VERSION so we don't forget to update it to "2.5.0"
after we release 2.5.0 and create a 2.6 machine class.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit aa8580cddf.
As described in
http://article.gmane.org/gmane.comp.emulators.qemu/371432
that commit causes linux guests to crash on memory hot-unplug.
The original problem it's trying to solve has now
been addressed within virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use realize to initialize the xen_platform device
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
=+G1+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc, virtio features, fixes, cleanups
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (37 commits)
hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
i386: keep cpu_model field in MachineState uptodate
vhost: set the correct queue index in case of migration with multiqueue
piix: fix resource leak reported by Coverity
seccomp: add memfd_create to whitelist
vhost-user-test: check ownership during migration
vhost-user-test: add live-migration test
vhost-user-test: learn to tweak various qemu arguments
vhost-user-test: wrap server in TestServer struct
vhost-user-test: remove useless static check
vhost-user-test: move wait_for_fds() out
vhost: add migration block if memfd failed
vhost-user: use an enum helper for features mask
vhost user: add rarp sending after live migration for legacy guest
vhost user: add support of live migration
net: add trace_vhost_user_event
vhost-user: document migration log
vhost: use a function for each call
vhost-user: add a migration blocker
vhost-user: send log shm fd along with log_base
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update cpu_model in MachineState for i386, so that the field can be used
for cpu hotplug, instead of using a static variable.
This patch is rebased on the latest master.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Enable the fw_cfg DMA interface for all the x86 platforms.
Based on Gerd Hoffman's initial implementation.
Signed-off-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The xen-platform code crashes on reset if the xen backend is not
initialized, because it calls xc_hvm_set_mem_type(). Ensure xen-platform
won't be created without initializing the xen backend.
The assert can't be triggered by the user because the device is not
hotpluggable, and the only code creating it (at pc_xen_hvm_init())
already checks xen_enabled().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Without this check, the xen-platform device will crash on reset
if using the accel option with anything other than xen (e.g.
"-machine xenfv,accel=kvm").
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.
This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.
x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For GICv3 ITS implementation we are going to use requester IDs in KVM IRQ
routing code. This patch introduces reusable convenient way to obtain this
ID from the device pointer. The new function is now used in some places,
where the same calculation was used.
MemTxAttrs.stream_id also renamed to requester_id in order to better
reflect semantics of the field.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <5814bcb03a297f198e796b13ed9c35059c52f89b.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use a hash table indexed on bus pointers to store information about buses
instead of using the bus numbers.
Bus pointers are stored in a new VTDBus struct together with the vector
of device address space pointers indexed by devfn.
- The bus number is still used for lookup for selective SID based invalidate,
in which case the bus number is lazily resolved from the bus hash table and
cached in a separate index.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If (setup_size+1)*512 is small enough, kernel_size -= setup_size can allocate
a huge amount of memory. Avoid that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This file does not exist on bionic libc and the functions it defines
are in fact not used by pci-assign.c. Remove it.
Reported-by: Houcheng Lin <houcheng@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After CPU hotplug has been converted to BUS-less hot-plug infrastructure,
the only function ICC bus performs is to propagate reset to LAPICs. However
LAPIC could be reset by registering its reset handler after all device are
initialized.
Do so and drop ~30LOC of not needed anymore ICCBus related code.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
During reset some devices (such as hpet, rtc) might send IRQ to APIC
which changes APIC's state from default one it's supposed to have
at machine startup time.
Fix this by resetting APIC after devices have been reset to cancel
any changes that qemu_devices_reset() might have done to its state.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When ICC bus/bridge is removed, APIC MMIO will be left
unmapped since it was mapped into system's address space
indirectly by ICC bridge.
Fix it by moving mapping into APIC code, so it would be
possible to remove ICC bus/bridge code later.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Convert the kvm_default_features and kvm_default_unset_features arrays
into a simple list of property/value pairs that will be applied to
X86CPU objects when using KVM.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In order to simplify arguments of function, introduce a new struct
named X86CPUTopoInfo.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
mapping DIMMs non contiguously allows to workaround
virtio bug reported earlier:
http://lists.nongnu.org/archive/html/qemu-devel/2015-08/msg00522.html
in this case guest kernel doesn't allocate buffers
that can cross DIMM boundary keeping each buffer
local to a DIMM.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
setting gap to TRUE will make sparse DIMM
address auto allocation, leaving gaps between
a new DIMM address and preceeding existing DIMM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_compat_2_4() doesn't exist, and we shouldn't create one. Add a
comment explaining why the function doesn't exist and why pc_compat_*()
functions are deprecated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off)
* NBD API upgrades from Daniel
* strtosz fixes from Marc-André
* improved support for readonly=on on scsi-generic devices
* new "info ioapic" and "info lapic" monitor commands
* Peter Crosthwaite's ELF_MACHINE cleanups
* docs patches from Thomas and Daniel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWBSAEAAoJEL/70l94x66DeL4H/21YR4GWCqo30f+W5kx24ZNo
by8H2kdZmWKRr/La1JlAReki9GCP1U8Q0cYC8V885gHLKcahWS/75UKwNbw0OSyg
2jj4uREc645TTFAvV5kQ+uAw9F/dchvkXylrVgOoUPipfmYibXY8JLu9AcVnZi6H
X5Rvpqo4Uhp2cbRG7rYWrwgpNL+VZmKc8LDdqdlXrkjjanhuAYO2E9NBKaE+xJQQ
FHcpkV92iSZFEZ0CB535BTIdNdDM/ae6bw1As27EF10YBTfneCQNazSeh13pLO2n
lHit2GZr2VeTSBrPkPsItToY/Gw38duVZK4QM5/wSkHBzyeUJY0ltQrf53veYfk=
=uc+I
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* First batch of MAINTAINERS updates
* IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off)
* NBD API upgrades from Daniel
* strtosz fixes from Marc-André
* improved support for readonly=on on scsi-generic devices
* new "info ioapic" and "info lapic" monitor commands
* Peter Crosthwaite's ELF_MACHINE cleanups
* docs patches from Thomas and Daniel
# gpg: Signature made Fri 25 Sep 2015 11:20:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (52 commits)
doc: Refresh URLs in the qemu-tech documentation
docs: describe the QEMU build system structure / design
typedef: add typedef for QemuOpts
i386: interrupt poll processing
i386: partial revert of interrupt poll fix
ppc: Rename ELF_MACHINE to be PPC specific
i386: Rename ELF_MACHINE to be x86 specific
alpha: Remove ELF_MACHINE from cpu.h
mips: Remove ELF_MACHINE from cpu.h
sparc: Remove ELF_MACHINE from cpu.h
s390: Remove ELF_MACHINE from cpu.h
sh4: Remove ELF_MACHINE from cpu.h
xtensa: Remove ELF_MACHINE from cpu.h
tricore: Remove ELF_MACHINE from cpu.h
or32: Remove ELF_MACHINE from cpu.h
lm32: Remove ELF_MACHINE from cpu.h
unicore: Remove ELF_MACHINE from cpu.h
moxie: Remove ELF_MACHINE from cpu.h
cris: Remove ELF_MACHINE from cpu.h
m68k: Remove ELF_MACHINE from cpu.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename ELF_MACHINE to be I386 specific. This is used as-is by the
multiboot loader.
Linux-user previously used this definition but will not anymore,
falling back to the default bahaviour of using ELF_ARCH as ELF_MACHINE.
This removes another architecture specific definition from the global
namespace.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The existing default_machine_opts and default_display settings will
still apply to future machine classes. So it makes sense to move them to
pc_i440fx_machine_options() instead of keeping them in a
version-specific machine_options function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The existing default_machine_opts, default_display, no_floppy, and
no_tco settings will still apply to future machine classes. So it makes
sense to move them to pc_q35_machine_options() instead of keeping them
in a version-specific machine_options function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7+ii
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging
xen-2015-09-10
# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
xen/pt: Don't slurp wholesale the PCI configuration registers
xen/pt: Check for return values for xen_host_pci_[get|set] in init
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
xen/pt: Make xen_pt_unregister_device idempotent
xen/pt: Log xen_host_pci_get/set errors in MSI code.
xen/pt: Log xen_host_pci_get in two init functions
xen/pt: Remove XenPTReg->data field.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
xen/pt: Sync up the dev.config and data values.
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
xen/pt/msi: Add the register value when printing logging and error messages
xen: use errno instead of rc for xc_domain_add_to_physmap
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
xen/pt: Make xen_pt_msi_set_enable static
xen/pt: Update comments with proper function name.
xen/HVM: atomically access pointers in bufioreq handling
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
xen, gfx passthrough: add opregion mapping
xen, gfx passthrough: register host bridge specific to passthrough
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently IGD drivers always need to access PCH by 1f.0. But we
don't want to poke that directly to get ID, and although in real
world different GPU should have different PCH. But actually the
different PCH DIDs likely map to different PCH SKUs. We do the
same thing for the GPU. For PCH, the different SKUs are going to
be all the same silicon design and implementation, just different
features turn on and off with fuses. The SW interfaces should be
consistent across all SKUs in a given family (eg LPT). But just
same features may not be supported.
Most of these different PCH features probably don't matter to the
Gfx driver, but obviously any difference in display port connections
will so it should be fine with any PCH in case of passthrough.
So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
scenarios, 0x9cc3 for BDW(Broadwell).
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
We will try to reuse assign_dev_load_option_rom in xen side, and
especially its a good beginning to unify pci assign codes both on
kvm and xen in the future.
[Fix build for Windows]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
it will prevent guests on old machines from seeing
inconsistent memory mapping in firmware/ACPI views.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
reserved-memory-end tells firmware address from which
it could start treating memory as PCI address space
and map PCI BARs after it to avoid collisions with
RAM.
Currently it is incorrectly pointing to address where
hotplugged memory range starts which could redirect
hotplugged RAM accesses to PCI BARs when firmware
maps them over RAM or viceverse.
Fix this by pointing reserved-memory-end to the end
of memory hotplug area.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is unused. cpu_exit now is almost exclusively an internal function
to the CPU execution loop. In a few patches, we'll change the remaining
occurrences to qemu_cpu_kick, making it truly internal.
Reviewed-by: Richard henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IGD passthrough wants to supply a different pci and
host devices, inheriting i440fx devices. Make types
configurable.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch adds support for SMBIOS 3.0 entry point. When caller invokes
smbios_set_defaults(), it can specify entry point as 2.1 or 3.0. Then
smbios_get_tables() will return the entry point table in right format.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1440615870-9518-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current smbios builds type 19 table from e820, which is x86 specific.
This patch removes smbios' dependency on e820 by passing an array
of memory area to smbios_get_tables().
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch extracts out the procedure of buidling x86 SMBIOS tables
into a dedicated function.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When building QEMU with Mingw64 toolchain I see a warning
CC x86_64-softmmu/hw/i386/acpi-build.o
hw/i386/acpi-build.c: In function 'acpi_build':
hw/i386/acpi-build.c:1138:9: warning: 'pm.cpu_hp_io_base' may be used uninitialized in this function [-Wmaybe-uninitialized]
aml_append(crs,
^
hw/i386/acpi-build.c:1666:16: note: 'pm.cpu_hp_io_base' was declared here
AcpiPmInfo pm;
^
In acpi_get_pm_info() some of the fields are pre-initialized
to 0, but this one was missed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will make the info readily available for the other initialization
functions, and will allow us to simplify their argument list.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_memory_init() already expects a PCMachineState object, there's no
point in upcasting it to MachineState before calling the function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_cmos_init() already expects a PCMachineState object, there's no point
in upcasting it to MachineState before calling the function.
While doing it, reorder the arguments so PCMachineState is the first
function argument.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only PC machines that didn't call pc_default_machine_options() were
isaps and xenfv. Both were already overwriting max_cpus, and only isapc
was not overwriting hot_add_cpu.
After making isapc set hot_add_cpu to NULL, we can move the
pc_default_machine_options() code the PC common class_init.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All TYPE_PC_MACHINE subclasses call pc_common_machine_options().
TYPE_PC_MACHINE can simply initialize the common options on class_init
directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make the code use the same variable name everywhere. "pcms" is already
being used in existing code and it's shorter.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No errors should happen when registering the properties, but we
shouldn't silently ignore them if they happen.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can use compat_props to keep CPUID feature compatibility, using
the boolean QOM properties for CPUID feature flags.
This simplifies the compatibility code, and reduces duplication between
pc_piix.c and pc_q35.c.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The old rules.mak loads dependency .d files using include directive
with file glob pattern "*.d". This breaks the build when build tree has
left-over *.d files from another build.
This patch fixes this by
- loading precise list of .d files made from *.o and *.mo.
- specifying explicit list of required dependency info files for
*.hex autogenerated sources.
Note that Makefile still includes some .d in root directory by including
"*.d".
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In rules like "bar/%.o: %.c" there is a difference between $(*D) and
$(@D). $(*D) expands to '.', while $(@D) expands to 'bar'. It is
cleaner to generate *.d in the same directory where appropriate *.o
resides. This allows precise including of dependency info from .d files.
As a hack, we also touch two sources for generated *.hex files. Without
this hack, anyone doing "git pull; make" will not get *.hex rebuilt
correctly since the dependency file would be missing.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 2332333c added a _STA method that hides the device. The fact
that the device is not shown in the gui make it harder to install its
Windows' device.
https://bugzilla.redhat.com/show_bug.cgi?id=1238141
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVo6kaAAoJECgfDbjSjVRpEvcH/jiNHGHD+AzFSJ6+vcKH8MHY
GVyWxvnFimyusnv74c7nwTsRGjRycKCPFy8GN/ZX+VWpIpPwK9mysBQ97zM45xeM
T+w1eT4zXafZESr6coAaUu6AvPnVPmsx2im6j5LxBnyIzj41D7dydOM0dU/OHOSI
gUS2DlhqqRPqkB2LscIrkkCmiWpizxTACzZzrko+AuTZ6YVTOEWcnRps9gqR+MWF
o24uppNPIkkmKoWBbXEiTfTqy7rcWydCb/BiM0UMo2cTOeXESNiaQNbKL2ED8K5d
187sL9XCkBrImh4NOFMy4ZKsJ7Uy9zg+zpk03XbjMF+7S155Fcacp2ahDtuCoDA=
=DITH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: fixes for 2.4
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3
Revert "virtio-net: enable virtio 1.0"
virtio-pci: don't crash on illegal length
qdev: fix 64 bit properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit fddd179ab9,
"pc: Convert *_MACHINE_OPTIONS macros into functions"
broke the chaining of *_machine_options() functions on
pc-i440fx-2.3, at:
-#define PC_I440FX_2_3_MACHINE_OPTIONS \
- PC_I440FX_2_4_MACHINE_OPTIONS, \
- .alias = NULL, \
- .is_default = 0
+static void pc_i440fx_2_3_machine_options(QEMUMachine *m)
+{
+ pc_i440fx_machine_options(m);
+ m->alias = NULL;
+ m->is_default = 0;
+}
I have replaced PC_I440FX_2_4_MACHINE_OPTIONS with a
pc_i440fx_machine_options() call, instead of calling
pc_i440fx_2_4_machine_options(). This broke the setting of default_machine_opts
and default_display on pc-i440fx-{2.0,2,1,2.2,2.3}.
Fix this by making pc_i440fx_2_3_machine_options() reuse
pc_i440fx_2_4_machine_options().
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVnO/3AAoJECgfDbjSjVRp6lAH/2RAlzoopHDNMCj5r3wHygnA
WD1rjugftcQNJ5HkL1Oe9heQnjUcx4jdaskrTyP8vElY1zheGPYYqtPYjMB3Kfsu
fIQUhjhU6lKjF+0Q9QeyOyz9uvHWgTwtiQsHdFj+fsw7qMpiiADgGmlXoin01ZF9
yGaGZ5GcLNEHXGWyzEpKOml1UxtMFZRe649KV1tqLBoOSLdw+c3SzrGvKYjUtGnG
luMHPAJcKS7khSTyCVJN8un6SjbC/aB22mlh7TgxeNBANsGJVCH09lLCmczkIKAJ
73sut/+2f2aS9qGaSJiI5ElENDhSlWlSjNG/x4dp07fvurxpojde+bYS9veSo3c=
=cQ0D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: fixes and updates
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Jul 8 10:40:07 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
tco-test: fix up config accesses and re-enable
virtio fix cfg endian-ness for BE targets
virtio-pci: implement cfg capability
virtio: define virtio_pci_cfg_cap in header.
pcie: Set the "link active" in the link status register
pci_regs.h: import from linux
virtio_net: reuse constants from linux
hw/i386/pc: don't carry FDC from pc_basic_device_init() to pc_cmos_init()
hw/i386/pc: reflect any FDC @ ioport 0x3f0 in the CMOS
hw/i386/pc: factor out pc_cmos_init_floppy()
ich9: implement strap SPKR pin logic
tests: add testcase for TCO watchdog emulation
ich9: add TCO interface emulation
acpi: split out ICH ACPI support
Revert "dataplane: allow virtio-1 devices"
dataplane: fix cross-endian issues
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thanks to the last patch, pc_cmos_init() doesn't need the (optional)
board-default FDC any longer as an input parameter. Update
pc_basic_device_init() not to hand it back to pc_init1() / pc_q35_init(),
and update the latter not to carry the FDC to pc_cmos_init(). This
simplifies the code.
pc_init1() | pc_q35_init()
pc_basic_device_init()
pc_cmos_init()
Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the pc-q35-2.4 machine type, if the user creates an ISA FDC manually:
-device isa-fdc,driveA=drive-fdc0-0-0 \
-drive file=...,if=none,id=drive-fdc0-0-0,format=raw
then the board-default FDC will be skipped, and only the explicitly
requested FDC will exist. qtree-wise, this is correct; however such an FDC
is currently not registered in the CMOS, because that code is only reached
for the board-default FDC.
The pc_cmos_init_late() one-shot reset handler -- one-shot because the
CMOS is not reprogrammed during warm reset -- should search for any ISA
FDC devices, created implicitly (by board code) or explicitly, and set the
CMOS accordingly to the ISA FDC(s) with iobase=0x3f0:
- if there is no such FDC, report both drives absent,
- if there is exactly one such FDC, report its drives in the CMOS,
- if there are more than one such FDCs, then pick one (it is not specified
which one), and print a warning about the ambiguity.
Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jan Tomko <jtomko@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract the pc_cmos_init_floppy() function from pc_cmos_init(). The
function sets two RTC registers: floppy drive types (0x10), overwriting
the earlier value in there), and REG_EQUIPMENT_BYTE (0x14), setting bits
in the prior value.
Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It needs to be the first one and it is not optional, that is the reason
why it is opencoded. For new machine types, it is required that machine
type name is the same in both sides.
It is just done right now for pc's.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This section would be sent:
a- for all new machine types
b- for old machine types if section state is different form {running,paused}
that were the only giving us troubles.
So, in new qemus: it is alwasy there. In old qemus: they are only
there if it an error has happened, basically stoping on target.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This interface provides some registers within a 32-byte range and can be
acessed through PCI-to-LPC bridge interface (PMBASE + 0x60).
It's commonly used as a watchdog timer to detect system lockups through
SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If
NO_REBOOT bit is not set in GCS (General Control and Status register),
the system will be resetted upon second timeout if TCO_RLD register
wasn't previously written to prevent timeout.
This patch adds support to TCO watchdog logic and few other features
like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection,
etc. are not implemented yet.
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The property can take values on, off or auto. The default is "off"
for KVM and pre-2.4 machines, otherwise "auto" (which makes it
available on TCG or on new-enough kernels).
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Q35's ACPI device is hard-coding SMM availability to KVM. Place the
logic where the board is created instead, so that it will be possible
to override it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will enable SMM even if KVM is in use. Rename the field and
arguments.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HotplugHandlerClass::plug() shouldn't fail and hence use error_abort
to abort if it fails.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
pc_dimm_plug() has code that will be needed for memory plug handlers
in other archs too. Extract code from pc_dimm_plug() into a generic
routine pc_dimm_memory_plug() that resides in pc-dimm.c. Also
correspondingly refactor re-usable unplug code into pc_dimm_memory_unplug().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move hotplug_memory_base and hotplug_memory fields of PCMachineState
into a separate structure so that the same can be made use of from
other architectures supporing memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
remove some code duplication in acpi-build.c and drop 5
ASL and binary blobs files with TPM ACPI device description,
replacing them with 1 small hunk written in AML API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
commit ea96bc629c doesn't match the patch
submitted by Laszlo to qemu-devel. We reuse pc_q35_2_4_machine_options()
inside pc_q35_2_3_machine_options(), so we need to undo the no_floppy
change in pc_q35_2_3_machine_options().
(This discrepancy was due to a bad merge.)
This restores the previous behavior where all the 2.3 and older machines
had no_floppy=0.
Reported-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1434646168-3100-1-git-send-email-ehabkost@redhat.com
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[PMM: mention that this was a merge issue, not a review issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next patch adds section footers; but we don't want to
break migration compatibility so disable them on older
machine types
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVeXakAAoJECgfDbjSjVRpyFAH/AwSJhBbQOxtqS66INnzoLRJ
MWD3cP8tj0PzXsLx0cuPxdTboHH60alhSp+iLGv4NgNw15okY71bY2eLhewxS66W
a0wzVCaqeeD5GAoQaSOlqNLrhBodsKS62BWD9y0kK9rtMJfCW2C1JP8Mpue1XMuE
UC72tF4Q6wVdBD/kTD9DZW/23roFu0SuieFSjbQNNi1lInXtDv79UGX0xUHaXlal
+qCtRIy/wNZF0z5arNV/Skq7LKqYl7KZtTapZByy+q6vu0L8mOeXgJ9DLh666htB
NQJJ+VhsgBKPHmZqf8h4mPlvyp03rkr5dIGk7iB2o44GPaEJ/RjZ4wULjxWD12s=
=UY/0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (42 commits)
i386/acpi-build: fix PXB workarounds for unsupported BIOSes
i386/acpi-build: more traditional _UID and _HID for PXB root buses
vhost-scsi: move qdev properties into vhost-scsi.c
virtio-9p-device: move qdev properties into virtio-9p-device.c
virtio-serial-bus: move qdev properties into virtio-serial-bus.c
virtio-rng: move qdev properties into virtio-rng.c
virtio-scsi: move qdev properties into virtio-scsi.c
virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
virtio-net: move qdev properties into virtio-net.c
virtio-input: emulated devices [pci]
virtio-input: core code & base class [pci]
pci: add PCI_CLASS_INPUT_*
virtio-pci: fill VirtIOPCIRegions early.
virtio-pci: drop identical virtio_pci_cap
virtio-pci: move cap type to VirtIOPCIRegion
virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
virtio-pci: add virtio_pci_modern_region_map()
virtio-pci: add virtio_pci_modern_regions_init()
virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
virtio-balloon: switch to virtio_add_feature
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch
apci: fix PXB behaviour if used with unsupported BIOS
uses the following condition to see if a "PXB mem/IO chunk" has *not* been
configured by the BIOS:
(!range_base || range_base > range_limit)
When this condition evaluates to true, said patch *omits* the
corresponding entry from the _CRS.
Later on the patch checks for the opposite condition (with the intent of
*adding* entries to the _CRS if the "PXB mem/IO chunks" *have* been
configured). Unfortunately, the condition was negated incorrectly: only
the first ! operator was removed, which led to the nonsensical expression
(range_base || range_base > range_limit)
leading to bogus entries in the _CRS, and causing BSOD in Windows Server
2012 R2 when it runs on OVMF.
The correct negative of the condition seen at the top is
(range_base && range_base <= range_limit)
Fix the expressions.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI specification permits the _HID and _UID objects to evaluate to
strings. (See "6.1.5 _HID (Hardware ID)" and "6.1.12 _UID (Unique ID)" in
the ACPI v6.0 spec.)
With regard to related standards, the UEFI specification can also express
a device address composed from string _HID and _UID identifiers, inside
the Expanded ACPI Device Path Node. (See "9.3.3 ACPI Device Path", Table
49, in the UEFI v2.5 spec.)
However, numeric (integer) contents for both _HID and _UID are more
traditional. They are recommended by the UEFI spec for size reasons:
[...] the ACPI Device Path node is smaller and should be used if
possible to reduce the size of device paths that may potentially be
stored in nonvolatile storage [...]
External tools support them better (for example the --acpi_hid and
--acpi_uid options of "efibootmgr" only take numeric identifiers).
Finally, numeric _HID and _UID contents are existing practice in the QEMU
source.
This patch was tested with a Fedora 20 LiveCD and a preexistent Windows
Server 2012 R2 guest. Using "acpidump" and "iasl" in the Fedora guest, we
get, in the SSDT:
> Scope (\_SB)
> {
> Device (PC04)
> {
> Name (_UID, 0x04) // _UID: Unique ID
> Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
=5AmP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vhost: logs sharing
hw/acpi: piix4_pm_init(): take fw_cfg object no more
hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
docs: Add PXB documentation
apci: fix PXB behaviour if used with unsupported BIOS
hw/pxb: add numa_node parameter
hw/pci: add support for NUMA nodes
hw/pxb: add map_irq func
hw/pci: inform bios if the system has extra pci root buses
hw/pci: introduce PCI Expander Bridge (PXB)
hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
hw/acpi: remove from root bus 0 the crs resources used by other buses.
hw/acpi: add _CRS method for extra root busses
hw/apci: add _PRT method for extra PCI root busses
hw/acpi: add support for i440fx 'snooping' root busses
hw/pci: extend PCI config access to support devices behind PXB
hw/i386: query only for q35/pc when looking for pci host bridge
hw/pci: made pci_bus_num a PCIBusClass method
...
Conflicts:
hw/i386/pc_piix.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVbvwjAAoJEL7lnXSkw9fbaFwIAIh6PN5v6fvuEjnPX5ijHZC2
7iJoFd0I2cYrxgLe4xONFX9qzV5vgdEAJfXCljVCKAmzu5RK7G0ZSW81sJ3t6Mp8
kA8buJeyTp2UcTlDrC3qji8ScEIj+g8I9tKGflNVI2uDAVumMBPqnJNSFhbaqYlu
SEq+4y/D3J6xPzr7NhyHliG0NmxJrIn6QCtux5djj3xO4KXfp1j2YQCPKhYjkRlW
wHfqeD7x9LX6875FX3csgfPsYIycW0WYtba2adTe0vbTsclOY0CU3ho8HPeXgHE6
WQj6KYGT8Fo0zmK8UV0Jmok7+hZoxXXInf6vY+sSY58oe71FgdxNwLvIC6N0eQc=
=AALk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-06-03' into staging
trivial patches for 2015-06-03
# gpg: Signature made Wed Jun 3 14:07:47 2015 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2015-06-03: (30 commits)
configure: postfix --extra-cflags to QEMU_CFLAGS
cadence_gem: Fix Rx buffer size field mask
slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
translate-all: delete prototype for non-existent function
Add -incoming help text
hw/display/tc6393xb.c: Fix misusing qemu_allocate_irqs for single irq
hw/arm/nseries.c: Fix misusing qemu_allocate_irqs for single irq
hw/alpha/typhoon.c: Fix misusing qemu_allocate_irqs for single irq
hw/unicore32/puv3.c: Fix misusing qemu_allocate_irqs for single irq
hw/lm32/milkymist.c: Fix misusing qemu_allocate_irqs for single irq
hw/lm32/lm32_boards.c: Fix misusing qemu_allocate_irqs for single irq
hw/ppc/prep.c: Fix misusing qemu_allocate_irqs for single irq
hw/sparc/sun4m.c: Fix misusing qemu_allocate_irqs for single irq
hw/timer/arm_timer.c: Fix misusing qemu_allocate_irqs for single irq
hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irq
hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irq
hw/i386/pc: Fix misusing qemu_allocate_irqs for single irq
hw/intc/exynos4210_gic.c: Fix memory leak by adjusting order
hw/arm/omap_sx1.c: Fix memory leak spotted by valgrind
hw/ppc/e500.c: Fix memory leak
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This PIIX4 init function has no more reason to receive a pointer to the
FwCfg object. Remove the parameter from the prototype, and update callers.
As a result, the pc_init1() function no longer needs to save the return
value of pc_memory_init() and xen_load_linux(), which makes it more
similar to pc_q35_init().
The return type & value of pc_memory_init() and xen_load_linux() are not
changed themselves; maybe we'll need their return values sometime later.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
PXB does not work with unsupported bioses, but should
not interfere with normal OS operation.
We don't ship them anymore, but it's reasonable
to keep the work-around until we update the bios in qemu.
Fix this by not adding PXB mem/IO chunks to _CRS
if they weren't configured by BIOS.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The pxb can be attach to and existing numa node by specifying
numa_node option that equals the desired numa nodeid.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The bios looks for 'etc/extra-pci-roots' to decide if
is going to scan further buses after bus 0 tree.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
If multiple root buses are used, root bus 0 cannot use all the
pci holes ranges. Remove the IO/mem ranges used by the other
primary buses.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Save the IO/mem/bus numbers ranges assigned to the extra root busses
to be removed from the root bus 0 range.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
If the machine has extra root busses that are snooping to
the i440fx host bridge, we need to add them to
acpi in order to be properly detected by guests.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE anymore.
On i386 arch we only have two pci hosts, so we can look only for them.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
commit 5cb18b3d7b
TPM2 ACPI table support
was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
hex files).
Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since pc_allocate_cpu_irq only requests one irq, so let it just call
qemu_allocate_irq.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
valgrind complains about:
==16447== 48 bytes in 2 blocks are definitely lost in loss record 2,033 of 3,310
==16447== at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447== by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447== by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447== by 0x53EC3F: qint_from_int (qint.c:33)
==16447== by 0x53B426: qmp_output_type_int (qmp-output-visitor.c:162)
==16447== by 0x539257: visit_type_uint32 (qapi-visit-core.c:147)
==16447== by 0x471D07: property_get_uint32_ptr (object.c:1651)
==16447== by 0x47000C: object_property_get (object.c:822)
==16447== by 0x472428: object_property_get_qobject (qom-qobject.c:37)
==16447== by 0x25701A: build_append_pci_bus_devices (acpi-build.c:520)
==16447== by 0x25902E: build_ssdt (acpi-build.c:1004)
==16447== by 0x25A0A8: acpi_build (acpi-build.c:1420)
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
valgrind complains about:
==16447== 8 bytes in 1 blocks are definitely lost in loss record 552 of 3,310
==16447== at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447== by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447== by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447== by 0x36FB47: qemu_extend_irqs (irq.c:55)
==16447== by 0x36FBD3: qemu_allocate_irqs (irq.c:64)
==16447== by 0x24E622: pc_init1 (pc_piix.c:287)
==16447== by 0x24E76A: pc_init_pci (pc_piix.c:310)
==16447== by 0x2E9360: main (vl.c:4226)
==16447== 128 bytes in 1 blocks are definitely lost in loss record 2,569 of 3,310
==16447== at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447== by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447== by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447== by 0x36FB47: qemu_extend_irqs (irq.c:55)
==16447== by 0x36FBD3: qemu_allocate_irqs (irq.c:64)
==16447== by 0x25BEB2: kvm_i8259_init (i8259.c:133)
==16447== by 0x24E1F1: pc_init1 (pc_piix.c:219)
==16447== by 0x24E76A: pc_init_pci (pc_piix.c:310)
==16447== by 0x2E9360: main (vl.c:4226)
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Setting the parent bus of a device increases its ref count, which we
ultimately want to level out. However it is only safe to do so after the
last reference to the device in local code, as qom-set or similar operations
might decrease the ref count.
Therefore move the object_unref() from pc_new_cpu() into its callers.
The APIC operations on the last CPU in pc_cpus_init() are still potentially
insecure, but that is beyond the scope of this code movement.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
commit 5cb18b3d7b
TPM2 ACPI table support
was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
hex files).
Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.
Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern
Machine type.
Hence, let us not instantiate the FDC when all of the following apply:
- the machine type is pc-q35-2.4 or later,
- "-device isa-fdc" is not passed on the command line (nor in the config
file),
- no "-drive if=floppy,..." is requested.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The "no_floppy = 1" machine class setting causes "default_floppy" in
main() to become zero. Consequently, default_drive() will not call
drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no
default floppy drive will be created for the virtual machine. In that
case, board code should also not insist on the creation of the
board-default FDC.
The board-default FDC will still be created if the user requests a floppy
drive with "-drive if=floppy".
Additionally, separate FDCs can be specified manually with "-device
isa-fdc". They allow the
-device isa-fdc,driveA=...
syntax that is more flexible than the one required by the board-default
FDC:
-global isa-fdc.driveA=...
This patch doesn't change the behavior observably, as all Q35 machine
types have "no_floppy = 0".
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Even if board code decides not to request the creation of the FDC (keyed
off board-level factors, to be determined later), we should create the FDC
nevertheless if the user passes '-drive if=floppy' on the command line.
Otherwise '-drive if=floppy' would break without explicit '-device
isa-fdc' on such boards.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This patch introduces no observable change, but it allows the callers of
pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or
not request) the creation of the FDC explicitly.
At the moment both callers pass constant create_fdctrl=true (hence no
observable change).
Assuming a board passes create_fdctrl=false, "floppy" will be NULL on
output, and (beyond the FDC not being created) that NULL will be passed on
to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
In the old times, we always had pvpanic in ACPI and a _STA method told
the guest not to use it. Automatic generation dropped the _STA method
as the specification says that missing _STA means enabled and working.
Some guests (Linux) had buggy drivers and this change made them unable
to utilize pvpanic.
A Linux patch is posted as well, but I think it's worth to make pvpanic
useable on old guests at the price of three lines and few bytes of SSDT.
The old _STA method was
Method (_STA, 0, NotSerialized) {
Store (PEST, Local0)
If (LEqual (Local0, Zero)) {
Return (Zero) }
Else {
Return (0x0F) }}
Igor pointed out that we don't need to use a method to return a constant
and that 0xB (don't show in UI) is the common definition now.
Also, the device used to be PEVT. (PEVT as in "panic event"?)
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All pc-i440fx and pc-q35 init functions simply call the corresponding
compat function and then call the main init function. Use a macro to
generate that code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function is not needed anymore, we can simply call pc_init1()
directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This looks like a step backwards, but it will allow pc-0.1[0123] and
isapc to follow the same compat+init pattern used by the other
machine-types, allowing us to generate all init function using the same
macro later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The helper is not needed anymore, as the PC machine classes are
registered using QOM directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have a DEFINE_PC_MACHINE helper macro that just requires an
initialization function, it is trivial to convert them to register a QOM
machine class directly, instead of using QEMUMachine.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will simplify the DEFINE_PC_MACHINE macro, and will help us to
implement reuse of PC_COMPAT_* macros through class_init function reuse,
in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By now the new functions will get QEMUMachine as argument, but they will
be later converted to initialize a MachineClass struct directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will automatically generate the existing QEMUMachine structs based
on the *_MACHINE_OPTIONS macros, and automatically add registration code
for them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Define a MACHINE_OPTIONS macro for each PC machine, and move every field
inside the QEMUMachine structs to the macros, except for name, init, and
compat_props.
This also ensures that all MACHINE_OPTIONS inherit the fields from the
next version, so their definitions carry only the changes that exist
between one version and the next one.
Comments about specific cases:
pc-*-2.1:
Existing PC_*_2_1_MACHINE_OPTIONS macros were defined as:
PC_*_MACHINE_OPTIONS,
.default_machine_opts = "firmware=bios-256k.bin"
PC_*_2_2_MACHINE_OPTIONS is:
PC_*_2_3_MACHINE_OPTIONS
which is expanded to:
PC_*_MACHINE_OPTIONS,
.default_machine_opts = "firmware=bios-256k.bin",
.default_display = "std"
The only difference between 2_1 and 2_2 is .default_display, that's why
we didn't reuse PC_*_2_2_MACHINE_OPTIONS. The good news is that having
multiple initializers for a field is allowed by C99, and the last
initializer overrides the previous ones.
So we can reuse the 2_2 macro in 2_1 and define PC_*_2_1_MACHINE_OPTIONS
as:
PC_*_2_2_MACHINE_OPTIONS,
.default_display = NULL
pc-*-1.7:
PC_*_1_7_MACHINE_OPTIONS was defined as:
PC_*_MACHINE_OPTIONS
PC_*_2_0_MACHINE_OPTIONS is defined as:
PC_*_2_1_MACHINE_OPTIONS
which is expanded to:
PC_*_2_2_MACHINE_OPTIONS,
.default_display = NULL
which is expanded to:
PC_*_2_3_MACHINE_OPTIONS,
.default_display = NULL
which is expanded to:
PC_*_MACHINE_OPTIONS,
.default_machine_opts = "firmware=bios-256k.bin",
.default_display = "std",
.default_display = NULL /* overrides the previous line */
So, the only difference between PC_*_1_7_MACHINE_OPTIONS and
PC_*_2_0_MACHINE_OPTIONS is .default_machine_opts (as .default_display
is not explicitly set by PC_*_MACHINE_OPTIONS so it is NULL).
So we can keep the macro reuse pattern and define
PC_*_2_0_MACHINE_OPTIONS as:
PC_*_2_0_MACHINE_OPTIONS,
.default_machine_opts = NULL
pc-*-2.4 (alias and is_default fields):
Set alias and is_default fields inside the 2.4 MACHINE_OPTIONS macro,
and clear it in the 2.3 macro (that reuses the 2.4 macro).
hw_machine:
As all the machines older than v1.0 set hw_version explicitly, we can
safely move the field to the MACHINE_OPTIONS macros without affecting
the other versions that reuse them.
init function:
Some machines had the init function set inside the MACHINE_OPTIONS
macro. Move it to the QEMUMachine declaration, to keep it consistent
with the other machines.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move compat_props from pc-0.10 to the macro, to make it consistent with
the other machines.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VGA and vmware-svga rombar compat properties were added by commit
281a26b15b, but only to pc-0.13 and
pc-0.12. This breaks the PC_COMPAT_* nesting pattern we currently
follow.
The new variables will now be inherited by pc-0.11 and older, but
pc-0.11 and pc-0.10 already have PCI.rombar=0 on compat_props, so they
shouldn't be affected at all.
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The compat property was added by commit
9dbcca5aa1, and the pc-0.12 and older
machine-types were not changed because virtio-9p-pci was introduced on QEMU
0.13 (commit 9f10751365). The only problem is
that this breaks the PC_COMPAT_* nesting pattern we currently use.
So, move the property to PC_COMPAT_0_13. This make pc-0.12 and older inherit
it, but that shouldn't be an issue as QEMU 0.12 didn't have virtio-9p-pci.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code setting ide-drive.ver and scsi-disk.ver on pc-0.11
breaks the PC_COMPAT_* nesting pattern we currently use.
As those variables are overwritten in pc-0.10 too, they can be inherited
by pc-0.10 with no side-effects at all.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Those properties were introduced by commit
3827cdb1c3. They were not duplicated into
pc-0.13 and older because 0.14 was the first QEMU version supporting
qxl. The only problem is that this breaks the PC_COMPAT_* nesting
pattern we currently use.
So, move the properties to PC_COMPAT_0_14. This makes pc-0.13 and older
inherit them, but that shouldn't be an issue as QEMU 0.13 didn't support
qxl.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once we start adding compat code for pc-2.3, the usage of HW_COMPAT_2_1
in pc-*-2.2 won't be enough, as it also has to include PC_COMPAT_2_3
inside it. To ensure that, define PC_COMPAT_2_3, PC_COMPAT_2_2, and
PC_COMPAT_2_1 macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the convention to include commas inside the macros will allow
macros containing empty lists to be defined and used without compilation
errors.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the convention to include commas inside the macros will allow
macros containing empty lists to be defined and used without compilation
errors.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coding style change only.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RSDT points to other tables FADT, MADT, GTDT. This code is shared with x86.
Here we still use RSDT as UEFI puts ACPI tables below 4G address space,
and UEFI ignore the RSDT or XSDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-12-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- next part in the thread-safe address_space_* saga: atomic access
to the bounce buffer and the map_clients list, from Fam
- optional support for linking with tcmalloc, also from Fam
- reapplying Peter Crosthwaite's "Respect as_translate_internal
length clamp" after fixing the SPARC fallout.
- build system fix from Wei Liu
- small acpi-build and ioport cleanup by myself
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVQJd4AAoJEL/70l94x66DYFYH/3ifhqWZsd4dfJri0CGAHI4i
SpPmNeouc8W+F/3lwf6Inrh5NnTgd5QzoUBMQaWVkQKwUiWls8g2mXkT3jo0iDqT
/B40YXnZjNm20MixNaZmk9AsOF6OqPM8EMufau874k5zTlx3tCGAW1QD+I1N7WK7
DfsFsIUD1svo2prn55fSoitMG1TIVPnpcklb4YGJRbAacQYUDhr5KAIhT1quDR2R
93BvToyQmPqRQ4YKqnJLp8HAkL4FaJumfFZVvyh2cZvyaYGN/RVdi2Dw985dJDPX
/z4enE4GCAs4RDw3lZ1RDbiZDqpT2ibFgASg/arX3SxzqHirOGvMdkOjO99r9j4=
=aLjh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- miscellaneous cleanups for TCG (Emilio) and NBD (Bogdan)
- next part in the thread-safe address_space_* saga: atomic access
to the bounce buffer and the map_clients list, from Fam
- optional support for linking with tcmalloc, also from Fam
- reapplying Peter Crosthwaite's "Respect as_translate_internal
length clamp" after fixing the SPARC fallout.
- build system fix from Wei Liu
- small acpi-build and ioport cleanup by myself
# gpg: Signature made Wed Apr 29 09:34:00 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (22 commits)
nbd/trivial: fix type cast for ioctl
translate-all: use bitmap helpers for PageDesc's bitmap
target-i386: disable LINT0 after reset
Makefile.target: prepend $libs_softmmu to $LIBS
milkymist: do not modify libs-softmmu
configure: Add support for tcmalloc
exec: Respect as_translate_internal length clamp
ioport: reserve the whole range of an I/O port in the AddressSpace
ioport: loosen assertions on emulation of 16-bit ports
ioport: remove wrong comment
ide: there is only one data port
gus: clean up MemoryRegionPortio
sb16: remove useless mixer_write_indexw
sun4m: fix slavio sysctrl and led register sizes
acpi-build: remove dependency from ram_addr.h
memory: add memory_region_ram_resize
dma-helpers: Fix race condition of continue_after_map_failure and dma_aio_cancel
exec: Notify cpu_register_map_client caller if the bounce buffer is available
exec: Protect map_client_list with mutex
linux-user, bsd-user: Remove two calls to cpu_exec_init_all
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A predefined scope in the ACPI specs is precede with a backslash.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 bit in Memory device control fields must be cleared before writing to
register. But now this field isn't cleared when other fields are written.
To solve this bug, This patch fixes UpdateRule to WriteAsZeros in "Memory
device control fields" register.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The flags field is declared with default update rule 'Preserve',
this patch extends aml_field() to support UpdateRule so that we
can specify different values per field.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds unplug cb for memory device. It resets memory status
"is_enabled" in acpi_memory_unplug_cb(), removes the corresponding
memory region, unregisters vmstate, and unparents the object.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds unplug request cb for memory device, and adds the
is_removing boolean field to MemStatus. This field is used to indicate
whether the memory device in slot has been requested to be ejected.
This field is set to true in acpi_memory_unplug_request_cb().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patches will limit the following things to legacy
machine type:
- maximum number of virtqueues for virtio-pci were limited to 64
- auto msix bar size for virtio-net-pci were disabled by default
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move generic acpi building helpers into dedictated file and this
can be shared with other machines.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI related header file acpi-defs.h, includes definitions that
apply on other architectures as well. Move it in `include/hw/acpi/`
to sanely include it from other architectures.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ram_addr_t is an internal interface, everyone should go through
MemoryRegion. Clean it up by making rom_add_blob return a
MemoryRegion* and using the new qemu_ram_resize infrastructure.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
