Move one of large_number()'s three checks to uint_number(), and the
other two to float_number().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-5-armbru@redhat.com>
simple_number() checks only qnum_get_try_int(). Also check
qnum_get_try_uint() and qnum_get_double().
float_number() checks only qnum_get_double(). Also check
qnum_get_try_int() and qnum_get_try_uint().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-3-armbru@redhat.com>
simple_number() and float_number() convert from JSON to QNumber and
back.
simple_number() tests "-0", but skips the conversion back to JSON,
because it yields "0", not "-0". Works as intended, so better cover
it: don't skip, but expect the funny result.
float_number() tests "-32.20e-10", but skips the conversion back to
JSON, because it yields "-0". This is a known bug in
qnum_to_string(), marked FIXME there. Cover the bug: don't skip, but
expect the funny result.
While there, switch from g_assert() to g_assert_cmpstr() & friends for
friendlier test failures.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-2-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The first parameter passed to _send_qemu_cmd is supposed to be the
$QEMU_HANDLE. 102 does not do so here, fix it.
As a result, the output changes: Now we see the prompt this command is
supposedly waiting for before the resize message - as it should be.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-2-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
This simply calls bdrv_co_pwrite_zeroes() in all children.
bs->supported_zero_flags is also set to the flags that are supported
by all children.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <2f09c842781fe336b4c2e40036bba577b7430190.1605286097.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The quorum driver does not implement bdrv_co_block_status() and
because of that it always reports to contain data even if all its
children are known to be empty.
One consequence of this is that if we for example create a quorum with
a size of 10GB and we mirror it to a new image the operation will
write 10GB of actual zeroes to the destination image wasting a lot of
time and disk space.
Since a quorum has an arbitrary number of children of potentially
different formats there is no way to report all possible allocation
status flags in a way that makes sense, so this implementation only
reports when a given region is known to contain zeroes
(BDRV_BLOCK_ZERO) or not (BDRV_BLOCK_DATA).
If all children agree that a region contains zeroes then we can return
BDRV_BLOCK_ZERO using the smallest size reported by the children
(because all agree that a region of at least that size contains
zeroes).
If at least one child disagrees we have to return BDRV_BLOCK_DATA.
In this case we use the largest of the sizes reported by the children
that didn't return BDRV_BLOCK_ZERO (because we know that there won't
be an agreement for at least that size).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Tested-by: Tao Xu <tao3.xu@intel.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <db83149afcf0f793effc8878089d29af4c46ffe1.1605286097.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-13-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a parameter to skip test if some needed additional formats are not
supported (for example filter drivers).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-12-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
To use Avocado's testlogs plug-in on CI it is required to use
its 83.0 or greater version.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201211183827.915232-2-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On the pc-i440fx machine, the floppy drive relies on the i8257 DMA
controller. Add this device to the floppy fuzzer config, and silence the
warning about a missing format specifier for the null-co:// drive.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201216203328.41112-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
device[NUMBER] thing in QOM path is not stable and tracking it during
code modifications is not fun. Let's filter it like it's already done
in iotest 186.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216095205.526235-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to original commit, that added this filter (627f607e3d),
the problematic thing in qom path is device[NUMBER], not the whole
path. Seems that tracking the other parts of the path in iotest output
is not bad. Let's make _filter_qom_path stricter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216095205.526235-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8b1170012b has added a global maximum disk length for the block
layer, so the error message when creating an overly large disk has
changed.
Fixes: 8b1170012b
("block: introduce BDRV_MAX_LENGTH")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201214175158.299919-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The softfloat tests are external repositories, so we do not care
about implicit fallthrough warnings in this code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201211152426.350966-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8.
(clang >= 3.4 advertizes itself as GCC >= 4.2 compatible)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201210134752.780923-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In using the address_space_translate_internal API, address_space_cache_init
forgot one piece of advice that can be found in the code for
address_space_translate_internal:
/* MMIO registers can be expected to perform full-width accesses based only
* on their address, without considering adjacent registers that could
* decode to completely different MemoryRegions. When such registers
* exist (e.g. I/O ports 0xcf8 and 0xcf9 on most PC chipsets), MMIO
* regions overlap wildly. For this reason we cannot clamp the accesses
* here.
*
* If the length is small (as is the case for address_space_ldl/stl),
* everything works fine. If the incoming length is large, however,
* the caller really has to do the clamping through memory_access_size.
*/
address_space_cache_init is exactly one such case where "the incoming length
is large", therefore we need to clamp the resulting length---not to
memory_access_size though, since we are not doing an access yet, but to
the size of the resulting section. This ensures that subsequent accesses
to the cached MemoryRegionSection will be in range.
With this patch, the enclosed testcase notices that the used ring does
not fit into the MSI-X table and prints a "qemu-system-x86_64: Cannot map used"
error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test the scenario where the -action panic=none parameter is used to
signal that the VM must continue executing after a guest panic
occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-5-git-send-email-alejandro.j.jimenez@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable the run-gdbstub-sha1 test: it provokes an internal error
assertion failure in Ubuntu gdb 8.1.1-0ubuntu1 (Ubuntu gdb
8.1-0ubuntu3.2 also has this assert but we were previously skipping
this test because it doesn't support connection over local domain
sockets) :
timeout 60 /home/petmay01/linaro/qemu-for-merges/tests/guest-debug/run-test.py --gdb /usr/bin/gdb-multiar
/build/gdb-veKdC1/gdb-8.1.1/gdb/regcache.c:122: internal-error: void* init_regcache_descr(gdbarch*): Asser
A problem internal to GDB has been detected,
further debugging may prove unreliable.
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
Aborted (core dumped)
/home/petmay01/linaro/qemu-for-merges/tests/tcg/multiarch/Makefile.target:51: recipe for target 'run-gdbst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201214133702.24088-1-peter.maydell@linaro.org
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
-----BEGIN PGP SIGNATURE-----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=ISxg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
# gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (34 commits)
block: Fix deadlock in bdrv_co_yield_to_drain()
block: Fix locking in qmp_block_resize()
block: Simplify qmp_block_resize() error paths
block: introduce BDRV_MAX_LENGTH
block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()
block/io: bdrv_refresh_limits(): use ERRP_GUARD
block/file-posix: fix workaround in raw_do_pwrite_zeroes()
can-host: Fix crash when 'canbus' property is not set
iotests/221: Discard image before qemu-img map
file-posix: check the use_lock before setting the file lock
iotests/308: Add test for FUSE exports
iotests: Enable fuse for many tests
iotests: Allow testing FUSE exports
iotests: Give access to the qemu-storage-daemon
storage-daemon: Call bdrv_close_all() on exit
iotests/287: Clean up subshell test image
iotests: Let _make_test_img guess $TEST_IMG_FILE
iotests: Restrict some Python tests to file
iotests/091: Use _cleanup_qemu instad of "wait"
iotests: Derive image names from $TEST_IMG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
See the new comment for why this should be done.
I do not have a reproducer on master, but when using FUSE block exports,
this test breaks depending on the underlying filesystem (for me, it
works on tmpfs, but fails on xfs, because the block allocated by
file-posix has 16 kB there instead of 4 kB).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201207152245.66987-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have good coverage of the normal I/O paths now, but what remains is a
test that tests some more special cases: Exporting an image on itself
(thus turning a formatted image into a raw one), some error cases, and
non-writable and non-growable exports.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-21-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.
Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pretends FUSE exports are a kind of protocol. As such, they are
always tested under the format node. This is probably the best way to
test them, actually, because this will generate more I/O load and more
varied patterns.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
287 creates an image in a subshell (thanks to the pipe) to see whether
that is possible with compression_type=zstd. If _make_test_img were to
modify any global state, this global state would then be lost before we
could cleanup the image.
When using FUSE as the test protocol, this global state is important, so
clean up the image before the state is lost.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When most iotests want to create a test image that is named differently
from the default $TEST_IMG, they do something like this:
TEST_IMG="$TEST_IMG.base" _make_test_img $options
This works fine with the "file" protocol, but not so much for anything
else: _make_test_img tries to create an image under $TEST_IMG_FILE
first, and only under $TEST_IMG if the former is not set; and on
everything but "file", $TEST_IMG_FILE is set.
There are two ways we can fix this: First, we could make all tests
adjust not only TEST_IMG, but also TEST_IMG_FILE if that is present
(e.g. with something like _set_test_img_suffix $suffix that would affect
not only TEST_IMG but also TEST_IMG_FILE, if necessary). This is a
pretty clean solution, and this is maybe what we should have done from
the start.
But it would also require changes to most existing bash tests. So the
alternative is this: Let _make_test_img see whether $TEST_IMG_FILE still
points to the original value. If so, it is possible that the caller has
adjusted $TEST_IMG but not $TEST_IMG_FILE. In such a case, we can (for
most protocols) derive the corresponding $TEST_IMG_FILE value from
$TEST_IMG value and thus work around what technically is the caller
misbehaving.
This second solution is less clean, but it is robust against people
keeping their old habit of adjusting TEST_IMG only, and requires much
less changes. So this patch implements it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-15-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most Python tests are restricted to the file protocol (without
explicitly saying so), but these are the ones that would break
./check -fuse -qcow2.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the test environment has some other child processes running (like a
storage daemon that provides a FUSE export), then "wait" will never
finish. Use wait=yes _cleanup_qemu instead.
(We need to discard the output so there is no change to the reference
output.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-13-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid creating images with custom filenames in $TEST_DIR, because
non-file protocols may want to keep $TEST_IMG (and all other test
images) in some other directory.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-12-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This generally does not work on non-file protocols. It is better to
create the image with the final name from the start, and most tests do
this already. Let 046 follow suit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-11-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img convert (without -n) can often be replaced by a combination of
_make_test_img + qemu-img convert -n. Doing so allows converting to
protocols that do not allow direct file creation, such as FUSE exports.
The only problem is that for formats other than qcow2 and qed (qcow1 at
least), this may lead to high disk usage for some reason, so we cannot
do it everywhere.
But we can do it in 028 and 089, so let us do that so they can run on
FUSE exports. Also, in 028 this allows us to remove a 9-line comment
that used to explain why we cannot safely filter drive-backup's image
creation output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-10-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Executing _make_test_img as part of a pipe will undo all variable
changes it has done. As such, this could not work with FUSE (because
we want to remember all of our exports and their qemu instances).
Replace the pipe by a temporary file in 071 and 174 (the two tests that
can run on FUSE).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In most cases, _make_test_img does not need a _filter_imgfmt on top. It
does that by itself.
(The exception is when IMGFMT has been overwritten but TEST_IMG has not.
In such cases, we do need a _filter_imgfmt on top to filter the test's
original IMGFMT from TEST_IMG.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Verify that a fid specified on the command line shows up correctly
as the function_id in the guest.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[re-formatted overlong lines]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201130180216.15366-4-cohuck@redhat.com>
The kernel/initrd combination does not provide the virtio-net
driver; therefore, simply check whether the presented device type
is indeed virtio-net for the two virtio-net-{ccw,pci} devices.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[re-formatted overlong lines]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201130180216.15366-3-cohuck@redhat.com>
The max_revision prop of virtio-ccw devices can be used to force
an older revision for compatibility handling. The easiest way to
check this is to force a device to revision 0, which turns off
virtio-1.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[re-formatted overlong lines]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201130180216.15366-2-cohuck@redhat.com>
This adds a very basic test for checking that we present devices
in a way that Linux can consume: boot with both virtio-net-ccw and
virtio-net-pci attached and then verify that Linux is able to see
and detect these devices.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201126130158.1471985-1-cohuck@redhat.com>
qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are very different uses:
I would *expect* a function named qemu_opts_set to set an option in a
merge-lists QemuOptsList, such as -kernel, and possibly to set an option
in a non-merge-lists QemuOptsList with non-NULL id, similar to -set.
However, it wouldn't *work* to use qemu_opts_set for the latter
because qemu_opts_set uses fail_if_exists==1. So, for non-merge-lists
QemuOptsList and non-NULL id, the semantics of qemu_opts_set (fail if the
(QemuOptsList, id) pair already exists) are debatable.
On the other hand, I would not expect qemu_opts_set to create a
non-merge-lists QemuOpts with a single option; which it does, though.
For this case of non-merge-lists QemuOptsList and NULL id, qemu_opts_set
hardly adds value over qemu_opts_parse. It does skip some parsing and
unescaping, but that's not needed when creating default network
backends.
So qemu_opts_set has warty behavior for non-merge-lists QemuOptsList
if id is non-NULL, and it's mostly pointless if id is NULL. My
solution to keeping the API as simple as possible is to limit
qemu_opts_set to merge-lists QemuOptsList. For them, it's useful (we
don't want comma-unescaping for -kernel) *and* has sane semantics.
Network backend creation is switched to qemu_opts_parse.
qemu_opts_set is now only used on merge-lists QemuOptsList... except
in the testcase, which is changed to use a merge-list QemuOptsList.
With this change we can also remove the id parameter. With the
parameter always NULL, we know that qemu_opts_create cannot fail
and can pass &error_abort to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1. Fix the order in which
they are passed to the helpers.
Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
block-commit defaults @base-node to the deepest backing image. When
there is none, it fails with "Base 'NULL' not found". Improve to
"There is no backing image".
block-commit and block-stream reject a @base argument that doesn't
resolve with "Base 'BASE' not found". Commit 6b33f3ae8b "qemu-img:
Improve commit invalid base message" improved this message in
qemu-img. Improve it here, too: "Can't find '%s' in the backing
chain".
QERR_BASE_NOT_FOUND is now unused. Drop.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-4-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
contrib/plugins/hotblocks.c
contrib/plugins/hotpages.c
contrib/plugins/howvec.c
contrib/plugins/lockstep.c
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/plugin/bb.c
tests/plugin/empty.c
tests/plugin/insn.c
tests/plugin/mem.c
tests/test-rcu-simpleq.c
tests/test-rcu-slist.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not
to include osdep.h intentionally. The remaining reverts are the same
as in commit bbfff19688.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113061216.2483385-1-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
-----BEGIN PGP SIGNATURE-----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=abAb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20201210' into staging
Aspeed patches :
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
# gpg: Signature made Thu 10 Dec 2020 11:58:10 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20201210:
aspeed: g220a-bmc: Add an FRU
aspeed/smc: Add support for address lane disablement
ast2600: SRAM is 89KB
aspeed: Add support for the g220a-bmc board
hw/misc: add an EMC141{3,4} device model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dump the collected random data after a randomness test failure.
Note that this relies on the test having called
g_test_set_nonfatal_assertions() so we don't abort immediately on the
assertion failure.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QTests perform five tests on the Xilinx ZynqMP CAN controller:
Tests the CAN controller in loopback, sleep and snoop mode.
Tests filtering of incoming CAN messages.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-4-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Largely inspired by the TMP421 temperature sensor, here is a model for
the EMC1413/EMC1414 temperature sensors.
Specs can be found here :
http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create second ioapic, route virtio-mmio IRQs to it,
allow more virtio-mmio devices (24 instead of 8).
Needs ACPI, enabled by default, can be turned off
using -machine ioapic2=off
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-8-kraxel@redhat.com
Change that will be introduced by following patch:
@@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
CINS, 1,
CRMV, 1,
CEJ0, 1,
+ CEJF, 1,
Offset (0x05),
CCMD, 8
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The generic fuzzer can find double-fetch bugs. However:
* We currently have no good way of producing qemu-system reproducers for
double-fetch bugs. Even if we can get developers to run the binary-blob
reproducers with the qemu-fuzz builds, we currently don't have a minimizer for
these reproducers, so they are usually not easy to follow.
* Often times the fuzzer will provide a reproducer containing a
double-fetch for a bug that can be reproduced without double-fetching.
Until we find a way to build nice double-fetch reproducers that
developers are willing to look at, lets tell OSS-Fuzz to avoid
double-fetches.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201202164214.93867-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Missed in fd25017284 ("qtest: add a reproducer for LP#1878642").
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201201191026.4149955-2-philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fixture->fd is created in fixture_setup() and, likewise, needs to be closed
in fixture_tear_down().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125102403.57709-1-alex.chen@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By making libvhost-user a subproject, check it builds
standalone (without the global QEMU cflags etc).
Note that the library still relies on QEMU include/qemu/atomic.h and
linux_headers/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-6-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the binary file DSDT.pxb and clear bios-tables-test-allowed-diff.h
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-10-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add testcase for pxb to make sure the ACPI table is correct for guest.
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-9-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Setuptools is not needed anymore by the bundled copy of meson,
remove it.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "local" tests can fail on some automated build systems as
reported here:
https://lists.nongnu.org/archive/html/qemu-devel/2020-11/msg05510.html
This will need to be investigated and addressed later. Let's go for a
workaround in the meantime : mark the "local" tests as "slow" so that
they aren't executed with a simple "make check" like in the case above.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <160620382310.1423262.7364287092069513483.stgit@bahia.lan>
Signed-off-by: Greg Kurz <groug@kaod.org>
Install the liblttng-ust-dev package to be able to
build QEMU using the User-Space Tracer trace backend
(configure --enable-trace-backends=ust).
Suggested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201111121234.3246812-2-philmd@redhat.com>
Message-Id: <20201117173635.29101-6-alex.bennee@linaro.org>
Previously we were leaving temporary directories behind. While the
QEMUMachine does make efforts to clean up after itself the directory
belongs to the calling function. We use TemporaryDirectory to wrap
this although we explicitly clear the reference in tearDown() as it
doesn't get cleaned up otherwise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201117173635.29101-4-alex.bennee@linaro.org>
The first step to debug a thing is to know what created the thing in
the first place. Add some prefixes so random tmpdir's have something
grep in the code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201117173635.29101-3-alex.bennee@linaro.org>
If expected_args is 0, qtest frees the argument vector and then returns it
nevertheless. Coverity complains; in practice this is not an issue because
expected_args == 0 means that the caller is not interested in the argument
vector, but it would be a potential problem if somebody wanted to add
commands with optional arguments to qtest.
Suggested-by: Kamil Dudka <kdudka@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120073149.99079-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to the glib function requirements, we need initialise
the variable. Otherwise there will be compilation warnings:
glib-autocleanups.h:28:3: warning: ‘full_name’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201118115646.2461726-2-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
-----BEGIN PGP SIGNATURE-----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=0pFF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Patches for 5.2.0-rc2:
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
# gpg: Signature made Tue 17 Nov 2020 11:43:17 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests/081: Test rewrite-corrupted without WRITE
iotests/081: Filter image format after testdir
quorum: Require WRITE perm with rewrite-corrupted
io_uring: do not use pointer after free
file-posix: allow -EBUSY errors during write zeros on raw block devices
iotests: Replace deprecated ConfigParser.readfp()
char-stdio: Fix QMP default for 'signal'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In qobject_type(), NULL is returned when the 'QObject' returned from parse_value() is not of QString type,
and this 'QObject' memory will leaked.
So we need to first cache the 'QObject' returned from parse_value(), and finally
free 'QObject' memory at the end of the function.
Also, we add a testcast about invalid dict key.
The memleak stack is as follows:
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0xfffe4b3c34fb in __interceptor_malloc (/lib64/libasan.so.4+0xd34fb)
#1 0xfffe4ae48aa3 in g_malloc (/lib64/libglib-2.0.so.0+0x58aa3)
#2 0xaaab3557d9f7 in qnum_from_int qemu/qobject/qnum.c:25
#3 0xaaab35584d23 in parse_literal qemu/qobject/json-parser.c:511
#4 0xaaab35584d23 in parse_value qemu/qobject/json-parser.c:554
#5 0xaaab35583d77 in parse_pair qemu/qobject/json-parser.c:270
#6 0xaaab355845db in parse_object qemu/qobject/json-parser.c:327
#7 0xaaab355845db in parse_value qemu/qobject/json-parser.c:546
#8 0xaaab35585b1b in json_parser_parse qemu/qobject/json-parser.c:580
#9 0xaaab35583703 in json_message_process_token qemu/qobject/json-streamer.c:92
#10 0xaaab355ddccf in json_lexer_feed_char qemu/qobject/json-lexer.c:313
#11 0xaaab355de0eb in json_lexer_feed qemu/qobject/json-lexer.c:350
#12 0xaaab354aff67 in tcp_chr_read qemu/chardev/char-socket.c:525
#13 0xfffe4ae429db in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x529db)
#14 0xfffe4ae42d8f (/lib64/libglib-2.0.so.0+0x52d8f)
#15 0xfffe4ae430df in g_main_loop_run (/lib64/libglib-2.0.so.0+0x530df)
#16 0xaaab34d70bff in iothread_run qemu/iothread.c:82
#17 0xaaab3559d71b in qemu_thread_start qemu/util/qemu-thread-posix.c:519
Fixes: 532fb53284 ("qapi: Make more of qobject_to()")
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113145525.85151-1-alex.chen@huawei.com>
[Commit message tweaked]
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
-----BEGIN PGP SIGNATURE-----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=A3/B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging
* Fixes for compiling on Haiku, and add Haiku VM for compile-testing
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
# gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-17:
max111x: put it into the 'misc' category
nand: put it into the 'storage' category
ads7846: put it into the 'input' category
ssd0323: put it into the 'display' category
gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com
target/microblaze: Fix possible array out of bounds in mmu_write()
tests/vm: update NetBSD to 9.1
tests/vm: Add Haiku test based on their vagrant images
configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h
configure: Do not build pc-bios/optionrom on Haiku
configure: Fix the _BSD_SOURCE define for the Haiku build
qemu/bswap: Remove unused qemu_bswap_len()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test what happens when a rewrite-corrupted quorum node performs such a
rewrite, while there is no parent that has taken the WRITE permission.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, this breaks whenever the test directory contains the image
format (e.g. "/tmp/test-raw-file" is filtered to "/tmp/test-IMGFMT-file"
instead of "TEST_DIR").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 277 fails on Fedora 33 (Python 3.9) because a deprecation warning
changes the output:
nbd-fault-injector.py:230: DeprecationWarning: This method will be
removed in future versions. Use 'parser.read_file()' instead.
In fact, readfp() has already been deprecated in Python 3.2 and the
replacement has existed since the same version, so we can now
unconditionally switch to read_file().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113100602.15936-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alexander von Gluck IV <kallisti5@unixzen.com>
[PMD: Avoid recreating the image each time]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Add ninja package, /usr/bin/env hack and --disable-slirp]
Message-Id: <20201114165137.15379-5-thuth@redhat.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1715203
Signed-off-by: Thomas Huth <thuth@redhat.com>
iotest 277 fails on Fedora 33 (Python 3.9) because a deprecation warning
changes the output:
nbd-fault-injector.py:230: DeprecationWarning: This method will be
removed in future versions. Use 'parser.read_file()' instead.
In fact, readfp() has already been deprecated in Python 3.2 and the
replacement has existed since the same version, so we can now
unconditionally switch to read_file().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113100602.15936-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GI5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-15' into staging
Fix Lesser GPL license versions (should be "2.1" and not "2")
# gpg: Signature made Sun 15 Nov 2020 16:20:10 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-15: (26 commits)
nomaintainer: Fix Lesser GPL version number
test: Fix LGPL information in the file headers
tests/acceptance: Fix LGPL information in the file headers
tests/migration: Fix LGPL information in the file headers
sparc tcg cpus: Fix Lesser GPL version number
e1000e: Fix Lesser GPL version number
x86 hvf cpus: Fix Lesser GPL version number
nvdimm: Fix Lesser GPL version number
w32: Fix Lesser GPL version number
tpm: Fix Lesser GPL version number
overall/alpha tcg cpus|hppa: Fix Lesser GPL version number
overall usermode...: Fix Lesser GPL version number
migration: Fix Lesser GPL version number
parallel nor flash: Fix Lesser GPL version number
arm tcg cpus: Fix Lesser GPL version number
x86 tcg cpus: Fix Lesser GPL version number
linux user: Fix Lesser GPL version number
usb: Fix Lesser GPL version number
tricore tcg cpus: Fix Lesser GPL version number
xtensa tcg cpus: Fix Lesser GPL version number
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test is regularly failing on CI:
(05/34) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_microblaze_s3adsp1800:
Linux version 4.11.3 (thuth@thuth.remote.csb) (gcc version 6.4.0 (Buildroot 2018.05.2) ) #5 Tue Dec 11 11:56:23 CET 2018
...
Freeing unused kernel memory: 1444K
This architecture does not have kernel memory protection.
[nothing happens here]
Runner error occurred: Timeout reached (90.91 s)
This is a regression. Until someone figure out the problem,
disable the test to keep CI pipeline useful.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201109091719.2449141-1-f4bug@amsat.org>
Message-Id: <20201110192316.26397-9-alex.bennee@linaro.org>
There never was a "Lesser GPL version 2.0", It is either "GPL version 2.0"
or "Lesser GPL version 2.1". This patch replaces all "Lesser GPL version 2.0"
with "Lesser GPL version 2.1" in the test folder.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201110184223.549499-4-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There never was a "Lesser GPL version 2.0", It is either "GPL version 2.0"
or "Lesser GPL version 2.1". This patch replaces all "Lesser GPL version 2.0"
with "Lesser GPL version 2.1" in the tests/acceptance folder.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201110184223.549499-3-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There never was a "Lesser GPL version 2.0", It is either "GPL version 2.0"
or "Lesser GPL version 2.1". This patch replaces all "Lesser GPL version 2.0"
with "Lesser GPL version 2.1" in the tests/migration folder.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201110184223.549499-2-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Markus Armbruster
Eric Blake
Max Reitz
Alberto Garcia
Vladimir Sementsov-Ogievskiy
Wainer dos Santos Moschetta
Alexander Bulekov
Thomas Huth
Marc-André Lureau
Paolo Bonzini
Alejandro Jimenez
Peter Maydell
Cornelia Huck
Havard Skinnemoen
Vikram Garhwal
John Wang
Gerd Hoffmann
Igor Mammedov
Philippe Mathieu-Daudé
Alex Chen
Yubo Miao
Greg Kurz
Alex Bennée
Chen Qun
Kevin Wolf
Brad Smith
Alexander von Gluck IV
Philippe Mathieu-Daudé
Gan Qixin