For simplicity, always run BlockDevOps .drained_begin/end/poll()
callbacks in the main loop thread. This makes it easier to implement the
callbacks and avoids extra locks.
Move the function pointer declarations from the I/O Code section to the
Global State section for BlockDevOps, BdrvChildClass, and BlockDriver.
Narrow IO_OR_GS_CODE() to GLOBAL_STATE_CODE() where appropriate.
The test-bdrv-drain test case calls bdrv_drain() from an IOThread. This
is now only allowed from coroutine context, so update the test case to
run in a coroutine.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All of the functions that currently take a BlockDriverState, BdrvChild
or BlockBackend as their first parameter expect the associated
AioContext to be locked when they are called. In the case of
no_co_wrappers, they are called from bottom halves directly in the main
loop, so no other caller can be expected to take the lock for them. This
can result in assertion failures because a lock that isn't taken is
released in nested event loops.
Looking at the first parameter is already done by co_wrappers to decide
where the coroutine should run, so doing the same in no_co_wrappers is
only consistent. Take the lock in the generated bottom halves to fix the
problem.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When jobs are sleeping, for example to enforce a given rate limit, they
can be reentered early, in particular in order to get paused, to update
the rate limit or to get cancelled.
Before this patch, they behave in this case as if they had fully
completed their rate limiting delay. This means that requests are sped
up beyond their limit, violating the constraints that the user gave us.
Change the block jobs to sleep in a loop until the necessary delay is
completed, while still allowing cancelling them immediately as well
pausing (handled by the pause point in job_sleep_ns()) and updating the
rate limit.
This change is also motivated by iotests cases being prone to fail
because drain operations pause and unpause them so often that block jobs
complete earlier than they are supposed to. In particular, the next
commit would fail iotests 030 without this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-8-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-6-faithilikerun@gmail.com
Message-id: 20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-3-faithilikerun@gmail.com
Message-id: 20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-2-faithilikerun@gmail.com
Message-id: 20230324090605.28361-2-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_refresh_limits() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-21-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_recurse_can_replace() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-20-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_query_block_graph_info() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-19-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of amend
callbacks in BlockDriver need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-17-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_debug_event() need to hold a reader lock for the graph.
Unfortunately we cannot use a co_wrapper_bdrv_rdlock (i.e. make the
coroutine wrapper a no_coroutine_fn), because the function is called
(using the BLKDBG_EVENT macro) by mixed functions that run both in
coroutine and non-coroutine context (for example many of the functions
in qcow2-cluster.c and qcow2-refcount.c).
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-16-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_info() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-15-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_allocated_file_size() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-14-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drivers were a bit confused about whether .bdrv_open can run in a
coroutine and whether or not it holds a graph lock.
It cannot keep a graph lock from the caller across the whole function
because it both changes the graph (requires a writer lock) and does I/O
(requires a reader lock). Therefore, it should take these locks
internally as needed.
The functions used to be called in coroutine context during image
creation. This was buggy for other reasons, and as of commit 32192301,
all block drivers go through no_co_wrappers. So it is not called in
coroutine context any more.
Fix qcow2 and qed to work with the correct assumptions: The graph lock
needs to be taken internally instead of just assuming it's already
there, and the coroutine path is dead code that can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
GRAPH_RDLOCK_GUARD() and GRAPH_RDLOCK_GUARD_MAINLOOP() only take a
reader lock for the graph, so the correct annotation for them to use is
TSA_ASSERT_SHARED rather than TSA_ASSERT.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-8-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For some functions, it is part of their interface to be called without
holding the graph lock. Add a new macro to document this.
The macro expands to TSA_EXCLUDES(), which is a relatively weak check
because it passes in cases where the compiler just doesn't know if the
lock is held. Function pointers can't be checked at all. Therefore, its
primary purpose is documentation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Migration code can call bdrv_activate() in coroutine context, whereas
other callers call it outside of coroutines. As it calls other code that
is not supposed to run in coroutines, standardise on running outside of
coroutines.
This adds a no_co_wrapper to switch to the main loop before calling
bdrv_activate().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the recent introduction of many new coroutine callbacks,
a couple calls from non-coroutine_fn to coroutine_fn have sneaked
in; fix them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230406101752.242125-1-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Devices can pass their MemoryReentrancyGuard (from their DeviceState),
when creating new BHes. Then, the async API will toggle the guard
before/after calling the BH call-back. This prevents bh->mmio reentrancy
issues.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-3-alxndr@bu.edu>
[thuth: Fix "line over 90 characters" checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() where possible, since we always
submit work to the current thread anyways.
We want to also be sure that the thread submitting the work is
the same as the one processing the pool, to avoid adding
synchronization to the pool list.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-4-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LuringState.
In order to prevent mistakes from the caller side, avoid passing LuringState
in luring_io_{plug/unplug} and luring_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LinuxAioState.
In order to prevent mistakes from the caller side, avoid passing LinuxAioState
in laio_io_{plug/unplug} and laio_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixup a few minor typos
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230313003744.55476-1-wilfred.mallawa@opensource.wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The introduction of the graph lock is causing blk_get_geometry, a hot function
used in the I/O path, to create a coroutine. However, the only part that really
needs to run in coroutine context is the call to bdrv_co_refresh_total_sectors,
which in turn only happens in the rare case of host CD-ROM devices.
So, write by hand the three wrappers on the path from blk_co_get_geometry to
bdrv_co_refresh_total_sectors, so that the coroutine wrapper is only created
if bdrv_nb_sectors actually calls bdrv_refresh_total_sectors.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_get_geometry is only used in blk_co_get_geometry. Inline it in
there, to reduce the number of wrappers for bs->total_sectors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-7-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fill in the field in BlockLimits directly for host devices, and
copy it from there for the raw format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the protocol level, has_variable_length only needs to be true in the
very special case of host CD-ROM drives, so that they do not need an
explicit monitor command to read the new size when a disc is loaded
in the tray.
However, at the format level has_variable_length has to be true for all
raw blockdevs and for all filters, even though in practice the length
depends on the underlying file and thus will not change except in the
case of host CD-ROM drives.
As a first step towards computing an accurate value of has_variable_length,
add the value into the BlockLimits structure and initialize the field
from the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_get_geometry() eventually calls bdrv_nb_sectors(), which is a
co_wrapper_mixed_bdrv_rdlock. This means that when it is called from
coroutine context, it already assume to have the graph locked.
However, virtio_blk_sect_range_ok() in block/export/virtio-blk-handler.c
(used by vhost-user-blk and VDUSE exports) runs in a coroutine, but
doesn't take the graph lock - blk_*() functions are generally expected
to do that internally. This causes an assertion failure when accessing
an export for the first time if it runs in an iothread.
This is an example of the crash:
$ ./storage-daemon/qemu-storage-daemon --object iothread,id=th0 --blockdev file,filename=/home/kwolf/images/hd.img,node-name=disk --export vhost-user-blk,addr.type=unix,addr.path=/tmp/vhost.sock,node-name=disk,id=exp0,iothread=th0
qemu-storage-daemon: ../block/graph-lock.c:268: void assert_bdrv_graph_readable(void): Assertion `qemu_in_main_thread() || reader_count()' failed.
(gdb) bt
#0 0x00007ffff6eafe5c in __pthread_kill_implementation () from /lib64/libc.so.6
#1 0x00007ffff6e5fa76 in raise () from /lib64/libc.so.6
#2 0x00007ffff6e497fc in abort () from /lib64/libc.so.6
#3 0x00007ffff6e4971b in __assert_fail_base.cold () from /lib64/libc.so.6
#4 0x00007ffff6e58656 in __assert_fail () from /lib64/libc.so.6
#5 0x00005555556337a3 in assert_bdrv_graph_readable () at ../block/graph-lock.c:268
#6 0x00005555555fd5a2 in bdrv_co_nb_sectors (bs=0x5555564c5ef0) at ../block.c:5847
#7 0x00005555555ee949 in bdrv_nb_sectors (bs=0x5555564c5ef0) at block/block-gen.c:256
#8 0x00005555555fd6b9 in bdrv_get_geometry (bs=0x5555564c5ef0, nb_sectors_ptr=0x7fffef7fedd0) at ../block.c:5884
#9 0x000055555562ad6d in blk_get_geometry (blk=0x5555564cb200, nb_sectors_ptr=0x7fffef7fedd0) at ../block/block-backend.c:1624
#10 0x00005555555ddb74 in virtio_blk_sect_range_ok (blk=0x5555564cb200, block_size=512, sector=0, size=512) at ../block/export/virtio-blk-handler.c:44
#11 0x00005555555dd80d in virtio_blk_process_req (handler=0x5555564cbb98, in_iov=0x7fffe8003830, out_iov=0x7fffe8003860, in_num=1, out_num=0) at ../block/export/virtio-blk-handler.c:189
#12 0x00005555555dd546 in vu_blk_virtio_process_req (opaque=0x7fffe8003800) at ../block/export/vhost-user-blk-server.c:66
#13 0x00005555557bf4a1 in coroutine_trampoline (i0=-402635264, i1=32767) at ../util/coroutine-ucontext.c:177
#14 0x00007ffff6e75c20 in ?? () from /lib64/libc.so.6
#15 0x00007fffefffa870 in ?? ()
#16 0x0000000000000000 in ?? ()
Fix this by creating a new blk_co_get_geometry() that takes the lock,
and changing blk_get_geometry() to be a co_wrapper_mixed around it.
To make the resulting code cleaner, virtio-blk-handler.c can directly
call the coroutine version now (though that wouldn't be necessary for
fixing the bug, taking the lock in blk_co_get_geometry() is what fixes
it).
Fixes: 8ab8140a04
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230327113959.60071-1-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The barrier comes after an atomic increment, so it is enough to use
smp_mb__after_rmw(); this avoids a double barrier on x86 systems.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add emulation of TP4146 ("Flexible Data Placement").
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jesper Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for the Directive Send and Recv commands and the Identify
directive.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the mandatory Endurance Group identify data structures and log
pages.
For now, all namespaces in a subsystem belongs to a single Endurance
Group.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_refresh_total_sectors() need to hold a reader lock for the
graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-24-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_*_dirty_bitmap() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-23-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_delete_file() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-22-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_register_buf() and bdrv_unregister_buf() need to hold a reader lock
for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-21-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_eject() and bdrv_co_lock_medium() need to hold a reader lock for
the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-20-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_is_inserted() need to hold a reader lock for the graph.
blk_is_inserted() is done as a co_wrapper_mixed_bdrv_rdlock (unlike most
other blk_* functions) because it is called a lot from other blk_co_*()
functions that already hold the lock. These calls go through
blk_is_available(), which becomes a co_wrapper_mixed_bdrv_rdlock, too,
for the same reason.
Functions that run in a coroutine and can call bdrv_co_is_available()
directly are changed to do so, which results in better TSA coverage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_io_plug() and bdrv_co_io_unplug() need to hold a reader lock for
the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_ioctl() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is never called outside of block.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Images can't be opened in coroutine context because opening needs to
change the block graph. Add no_co_wrappers so that coroutines have a
simple way of opening images in a BH instead.
At the same time, mark the wrapped functions as no_coroutine_fn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some functions must not be called from coroutine context. The common
pattern to use them anyway from a coroutine is running them in a BH and
letting the calling coroutine yield to be woken up when the BH is
completed.
Instead of manually writing such wrappers, add support for generating
them to block-coroutine-wrapper.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230202133830.2152150-16-armbru@redhat.com>
Currently, when querying a qcow2 image, qemu-img info reports something
like this:
image: test.qcow2
file format: qcow2
virtual size: 64 MiB (67108864 bytes)
disk size: 196 KiB
cluster_size: 65536
Format specific information:
compat: 1.1
compression type: zlib
lazy refcounts: false
refcount bits: 16
corrupt: false
extended l2: false
Child node '/file':
image: test.qcow2
file format: file
virtual size: 192 KiB (197120 bytes)
disk size: 196 KiB
Format specific information:
extent size hint: 1048576
Notably, the way the keys are named is specific for image files: The
filename is shown under "image", the BDS driver under "file format", and
the BDS length under "virtual size". This does not make much sense for
nodes that are not actually supposed to be guest images, like the /file
child node shown above.
Give bdrv_node_info_dump() a @protocol parameter that gives a hint that
the respective node is probably just used for data storage and does not
necessarily present the data for a VM guest disk. This renames the keys
so that with this patch, the output becomes:
image: test.qcow2
[...]
Child node '/file':
filename: test.qcow2
protocol type: file
file length: 192 KiB (197120 bytes)
disk size: 196 KiB
Format specific information:
extent size hint: 1048576
(Perhaps we should also rename "Format specific information", but I
could not come up with anything better that will not become problematic
if we guess wrong with the protocol "heuristic".)
This change affects iotest 302, which has protocol node information in
its reference output.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-13-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to let qemu-img info present a block graph, add a parameter to
bdrv_node_info_dump() and bdrv_image_info_specific_dump() so that the
information of nodes below the root level can be given an indentation.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-9-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new QAPI type BlockGraphInfo and an associated
bdrv_query_block_graph_info() function that recursively gathers
BlockNodeInfo objects through a block graph.
A follow-up patch is going to make "qemu-img info" use this to print
information about all nodes that are (usually implicitly) opened for a
given image file.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-8-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no real reason why bdrv_query_image_info() should generally not
recurse. The ImageInfo struct has a pointer to the backing image, so it
should generally be filled, unless the caller explicitly opts out.
This moves the recursing code from bdrv_block_device_info() into
bdrv_query_image_info().
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-7-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img info never uses ImageInfo's backing-image field, because it
opens the backing chain one by one with BDRV_O_NO_BACKING, and prints
all backing chain nodes' information consecutively. Use BlockNodeInfo
to make it clear that we only print information about a single node, and
that we are not using the backing-image field.
Notably, bdrv_image_info_dump() does not evaluate the backing-image
field, so we can easily make it take a BlockNodeInfo pointer (and
consequentially rename it to bdrv_node_info_dump()). It makes more
sense this way, because again, the interface now makes it syntactically
clear that backing-image is ignored by this function.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-6-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ImageInfo sometimes contains flat information, and sometimes it does
not. Split off a BlockNodeInfo struct, which only contains information
about a single node and has no link to the backing image.
We do this so we can extend BlockNodeInfo to a BlockGraphInfo struct,
which has links to all child nodes, not just the backing node. It would
be strange to base BlockGraphInfo on ImageInfo, because then this
extended struct would have two links to the backing node (one in
BlockGraphInfo as one of all the child links, and one in ImageInfo).
Furthermore, it is quite common to ignore the backing-image field
altogether: bdrv_query_image_info() does not set it, and
bdrv_image_info_dump() does not evaluate it. That signals that we
should have different structs for describing a single node and one that
has a link to the backing image.
Still, bdrv_query_image_info() and bdrv_image_info_dump() are not
changed too much in this patch. Follow-up patches will handle them.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-5-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a block driver supports obtaining format-specific information, but
that object only contains optional fields, it is possible that none of
them are present, so that dump_qobject() (called by
bdrv_image_info_specific_dump()) will not print anything.
The callers of bdrv_image_info_specific_dump() put a header above this
information ("Format specific information:\n"), which will look strange
when there is nothing below. Modify bdrv_image_info_specific_dump() to
print this header instead of its callers, and only if there is indeed
something to be printed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The inlined nbd_readXX() functions call beXX_to_cpu(), themselves
declared in <qemu/bswap.h>. This fixes when refactoring:
In file included from ../../block/nbd.c:44:
include/block/nbd.h: In function 'nbd_read16':
include/block/nbd.h:383:12: error: implicit declaration of function 'be16_to_cpu' [-Werror=implicit-function-declaration]
383 | *val = be##bits##_to_cpu(*val); \
| ^~
include/block/nbd.h:387:1: note: in expansion of macro 'DEF_NBD_READ_N'
387 | DEF_NBD_READ_N(16) /* Defines nbd_read16(). */
| ^~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221125175328.48539-1-philmd@linaro.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since these functions always run in coroutine context, adjust
their name to include "_co_", just like all other BlockDriver callbacks.
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_debug_event() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper_mixed to move the actual function
into a coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_lock_medium() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
The only caller of this function is blk_lock_medium(). Therefore make
blk_lock_medium() a co_wrapper, so that it always creates a new
coroutine, and then make bdrv_lock_medium() a coroutine_fn where the
lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_eject() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
The only caller of this function is blk_eject(). Therefore make
blk_eject() a co_wrapper, so that it always creates a new coroutine, and
then make bdrv_eject() coroutine_fn where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_info() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_allocated_file_size() is categorized as an I/O function, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since it traverses the block nodes graph, which however is only
possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_getlength is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally co_wrapper calls AIO_WAIT_WHILE and it expects to release the
AioContext lock.
This is especially messy when a co_wrapper creates a coroutine and polls
in bdrv_open_driver, because this function has so many callers in so
many context that it can easily lead to deadlocks. Therefore the new
rule for bdrv_open_driver is that the caller must always hold the
AioContext lock of the given bs (except if it is a coroutine), because
the function calls bdrv_refresh_total_sectors() which is now a
co_wrapper.
Once the rwlock is ultimated and placed in every place it needs to be,
we will poll using AIO_WAIT_WHILE_UNLOCKED and remove the AioContext
lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name is not good, not the least because we are going to convert this
to a generated co_wrapper, which adds a _co infix after the first part
of the name.
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_inserted() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
At the same time, add also blk_is_inserted as co_wrapper_mixed, since it
is called in both coroutine and non-coroutine contexts.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally c_w_mixed_bdrv_rdlock calls AIO_WAIT_WHILE and it expects to
release the AioContext lock. Once the rwlock is ultimated and placed in
every place it needs to be, we will poll using AIO_WAIT_WHILE_UNLOCKED
and remove the AioContext lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_io_unplug is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
The only caller of this function is blk_io_unplug(), therefore make
blk_io_unplug() a co_wrapper, so that we're always running in a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_io_plug is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
The only caller of this function is blk_io_plug(), therefore make
blk_io_plug() a co_wrapper, so that we're always running in a coroutine
where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It has only one caller---inline it and remove the function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221215130225.476477-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add more annotations to functions, describing valid and invalid
calls from coroutine to non-coroutine context.
When applied to a function, no_coroutine_fn advertises that it should
not be called from coroutine_fn functions. This can be because the
function blocks or, in the case of generated_co_wrapper, to enforce
that coroutine_fn functions directly call the coroutine_fn that backs
the generated_co_wrapper.
coroutine_mixed_fn instead is for function that can be called in
both coroutine and non-coroutine context, but will suspend when
called in coroutine context. Annotating them is a first step
towards enforcing that non-annotated functions are absolutely
not going to suspend.
These can be used for example with the vrc tool:
# find functions that *really* cannot be called from no_coroutine_fn
(vrc) load --loader clang libblock.fa.p/meson-generated_.._block_block-gen.c.o
(vrc) paths [no_coroutine_fn,!coroutine_mixed_fn]
bdrv_remove_persistent_dirty_bitmap
bdrv_create
bdrv_can_store_new_dirty_bitmap
# find how coroutine_fns end up calling a mixed function
(vrc) load --loader clang --force libblock.fa.p/*.c.o
(vrc) paths [coroutine_fn] [!no_coroutine_fn]* [coroutine_mixed_fn]
...
bdrv_pread <- vhdx_log_write <- vhdx_log_write_and_flush <- vhdx_co_writev
...
Signed-off-by: Alberto Faria <afaria@redhat.com>
[Rebase, add coroutine_mixed_fn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221216110758.559947-3-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221131435.3851212-6-armbru@redhat.com>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
block/block-hmp-cmds.h and qemu/co-shared-resource.h use coroutine_fn
without including qemu/coroutine.h. They compile only if it's already
included from elsewhere.
I could fix that, but pulling in qemu/coroutine.h and everything it
includes just for a macro that expands into nothing feels silly.
Instead, move the macro to qemu/osdep.h.
Inclusions of qemu/coroutine.h just for coroutine_fn become
superfluous. Drop them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221221131435.3851212-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221221131435.3851212-2-armbru@redhat.com>
The generated coroutine wrappers already take care to take the lock in
the non-coroutine path, and assume that the lock is already taken in the
coroutine path.
The only thing we need to do for the wrapped function is adding the
GRAPH_RDLOCK annotation. Doing so also allows us to mark the
corresponding callbacks in BlockDriver as GRAPH_RDLOCK_PTR.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Take the rdlock already, before we add the assertions.
All these functions either read the graph recursively, or call
BlockDriver callbacks that will eventually need to be protected by the
graph rdlock.
Do it now to all functions together, because many of these recursively
call each other.
For example, bdrv_co_truncate calls BlockDriver->bdrv_co_truncate, and
some driver callbacks implement their own .bdrv_co_truncate by calling
bdrv_flush inside. So if bdrv_flush asserts but bdrv_truncate does not
take the rdlock yet, the assertion will always fail.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add co_wrapper_bdrv_rdlock and co_wrapper_mixed_bdrv_rdlock option to
the block-coroutine-wrapper.py script.
This "_bdrv_rdlock" option takes and releases the graph rdlock when a
coroutine function is created.
This means that when used together with "_mixed", the function marked
with co_wrapper_mixed_bdrv_rdlock will support both coroutine and
non-coroutine case, and in the latter case it will create a coroutine
that takes and releases the rdlock. When called from a coroutine, the
caller must already hold the graph lock.
Example:
void co_wrapper_mixed_bdrv_rdlock bdrv_f1();
Becomes
static void bdrv_co_enter_f1()
{
bdrv_graph_co_rdlock();
bdrv_co_function();
bdrv_graph_co_rdunlock();
}
void bdrv_f1()
{
if (qemu_in_coroutine) {
assume_graph_lock();
bdrv_co_function();
} else {
qemu_co_enter(bdrv_co_enter_f1);
...
}
}
When used alone, the function will not work in coroutine context, and
when called in non-coroutine context it will create a new coroutine that
takes care of taking and releasing the rdlock automatically.
Example:
void co_wrapper_bdrv_rdlock bdrv_f1();
Becomes
static void bdrv_co_enter_f1()
{
bdrv_graph_co_rdlock();
bdrv_co_function();
bdrv_graph_co_rdunlock();
}
void bdrv_f1()
{
assert(!qemu_in_coroutine());
qemu_co_enter(bdrv_co_enter_f1);
...
}
About their usage:
- co_wrapper does not take the rdlock, so it can be used also outside
the block layer.
- co_wrapper_mixed will be used by many blk_* functions, since the
coroutine function needs to call blk_wait_while_drained() and
the rdlock *must* be taken afterwards, otherwise it's a deadlock.
In the future this annotation will go away, and blk_* will use
co_wrapper directly.
- co_wrapper_bdrv_rdlock will be used by BlockDriver callbacks, ideally
by all of them in the future.
- co_wrapper_mixed_bdrv_rdlock will be used by the remaining functions
that are still called by coroutine and non-coroutine context. In the
future this annotation will go away, as we will split such mixed
functions.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the old assert_bdrv_graph_writable, and replace it with
the new version using graph-lock API.
See the function documentation for more information.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to the implementation in lockable.h, implement macros to
automatically take and release the rdlock.
Create the empty GraphLockable and GraphLockableMainloop structs only to
use it as a type for G_DEFINE_AUTOPTR_CLEANUP_FUNC.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block layer graph operations are always run under BQL in the main loop.
This is proved by the assertion qemu_in_main_thread() and its wrapper
macro GLOBAL_STATE_CODE.
However, there are also concurrent coroutines running in other iothreads
that always try to traverse the graph. Currently this is protected
(among various other things) by the AioContext lock, but once this is
removed, we need to make sure that reads do not happen while modifying
the graph.
We distinguish between writer (main loop, under BQL) that modifies the
graph, and readers (all other coroutines running in various AioContext),
that go through the graph edges, reading ->parents and->children.
The writer (main loop) has "exclusive" access, so it first waits for any
current read to finish, and then prevents incoming ones from entering
while it has the exclusive access.
The readers (coroutines in multiple AioContext) are free to access the
graph as long the writer is not modifying the graph. In case it is, they
go in a CoQueue and sleep until the writer is done.
If a coroutine changes AioContext, the counter in the original and new
AioContext are left intact, since the writer does not care where the
reader is, but only if there is one.
As a result, some AioContexts might have a negative reader count, to
balance the positive count of the AioContext that took the lock. This
also means that when an AioContext is deleted it may have a nonzero
reader count. In that case we transfer the count to a global shared
counter so that the writer is always aware of all readers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide a separate function that just quiesces the users of a node to
prevent new requests from coming in, but without waiting for the already
in-flight I/O to complete.
This function can be used in contexts where polling is not allowed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_can_store_new_dirty_bitmap and bdrv_remove_persistent_dirty_bitmap
check if they are running in a coroutine, directly calling the
coroutine callback if it's the case.
Except that no coroutine calls such functions, therefore that check
can be removed, and function creation can be offloaded to
c_w.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-15-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is never called in coroutine context, therefore
instead of manually creating a new coroutine, delegate it to the
block-coroutine-wrapper script, defining it as co_wrapper.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-14-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new annotation starts just a function wrapper that creates
a new coroutine. It assumes the caller is not a coroutine.
It will be the default annotation to be used in the future.
This is much better as c_w_mixed, because it is clear if the caller
is a coroutine or not, and provides the advantage of automating
the code creation. In the future all c_w_mixed functions will be
substituted by co_wrapper.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-11-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to the incoming new function specifiers,
rename g_c_w with a more meaningful name and document it.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-10-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is always called in coroutine_fn callbacks, therefore
it can directly call bdrv_co_create().
Rename it to bdrv_co_create_file too.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions end up calling bdrv_common_block_status_above(), a
generated_co_wrapper function.
In addition, they also happen to be always called in coroutine context,
meaning all callers are coroutine_fn.
This means that the g_c_w function will enter the qemu_in_coroutine()
case and eventually suspend (or in other words call qemu_coroutine_yield()).
Therefore we can mark such functions coroutine_fn too.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_common_block_status_above() is a g_c_w, and it is being called by
many "wrapper" functions like bdrv_is_allocated(),
bdrv_is_allocated_above() and bdrv_block_status_above().
Because we want to eventually split the coroutine from non-coroutine
case in g_c_w, create duplicate wrappers that take care of directly
calling the same coroutine functions called in the g_c_w.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of bdrv_parent_drained_begin_single() pass poll=false now,
so we don't need the parameter any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-16-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to make sure that bdrv_replace_child_noperm() doesn't have to
poll any more, get rid of the bdrv_parent_drained_begin_single() call.
This is possible now because we can require that the parent is already
drained through the child in question when the function is called and we
don't call the parent drain callbacks more than once.
The additional drain calls needed in callers cause the test case to run
its code in the drain handler too early (bdrv_attach_child() drains
now), so modify it to only enable the code after the test setup has
completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-15-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ignore_bds_parents is now ignored during drain_begin and drain_end, so
we can just remove it there. It is still a valid optimisation for
drain_all in bdrv_drained_poll(), so leave it around there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-13-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We only need to call both the BlockDriver's callback and the parent
callbacks when going from undrained to drained or vice versa. A second
drain section doesn't make a difference for the driver or the parent,
they weren't supposed to send new requests before and after the second
drain.
One thing that gets in the way is the 'ignore_bds_parents' parameter in
bdrv_do_drained_begin_quiesce() and bdrv_do_drained_end(): It means that
bdrv_drain_all_begin() increases bs->quiesce_counter, but does not
quiesce the parent through BdrvChildClass callbacks. If an additional
drain section is started now, bs->quiesce_counter will be non-zero, but
we would still need to quiesce the parent through BdrvChildClass in
order to keep things consistent (and unquiesce it on the matching
bdrv_drained_end(), even though the counter would not reach 0 yet as
long as the bdrv_drain_all() section is still active).
Instead of keeping track of this, let's just get rid of the parameter.
It was introduced in commit 6cd5c9d7b2 as an optimisation so that
during bdrv_drain_all(), we wouldn't recursively drain all parents up to
the root for each node, resulting in quadratic complexity. As it happens,
calling the callbacks only once solves the same problem, so as of this
patch, we'll still have O(n) complexity and ignore_bds_parents is not
needed any more.
This patch only ignores the 'ignore_bds_parents' parameter. It will be
removed in a separate patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-12-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Subtree drains are not used any more. Remove them.
After this, BdrvChildClass.attach/detach() don't poll any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-11-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The subtree drain was introduced in commit b1e1af394d as a way to avoid
graph changes between finding the base node and changing the block graph
as necessary on completion of the image streaming job.
The block graph could change between these two points because
bdrv_set_backing_hd() first drains the parent node, which involved
polling and can do anything.
Subtree draining was an imperfect way to make this less likely (because
with it, fewer callbacks are called during this window). Everyone agreed
that it's not really the right solution, and it was only committed as a
stopgap solution.
This replaces the subtree drain with a solution that simply drains the
parent node before we try to find the base node, and then call a version
of bdrv_set_backing_hd() that doesn't drain, but just asserts that the
parent node is already drained.
This way, any graph changes caused by draining happen before we start
looking at the graph and things stay consistent between finding the base
node and changing the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-10-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drained_end_counter is unused now, nobody changes its value any more. It
can be removed.
In cases where we had two almost identical functions that only differed
in whether the caller passes drained_end_counter, or whether they would
poll for a local drained_end_counter to reach 0, these become a single
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221118174110.55183-5-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Polling during bdrv_drained_end() can be problematic (and in the future,
we may get cases for bdrv_drained_begin() where polling is forbidden,
and we don't care about already in-flight requests, but just want to
prevent new requests from arriving).
The .bdrv_drained_begin/end callbacks running in a coroutine is the only
reason why we have to do this polling, so make them non-coroutine
callbacks again. None of the callers actually yield any more.
This means that bdrv_drained_end() effectively doesn't poll any more,
even if AIO_WAIT_WHILE() loops are still there (their condition is false
from the beginning). This is generally not a problem, but in
test-bdrv-drain, some additional explicit aio_poll() calls need to be
added because the test case wants to verify the final state after BHs
have executed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to use bdrv_child_get_parent_aio_context() from
bdrv_parent_drained_{begin,end}_single(), both of which are "I/O or GS"
functions.
Prior to 3ed4f708fe, all the implementations were I/O code anyway.
3ed4f708fe has put block jobs' AioContext field under the job mutex, so
to make child_job_get_parent_aio_context() work in an I/O context, we
need to take that lock there.
Furthermore, blk_root_get_parent_aio_context() is not marked as
anything, but is safe to run in an I/O context, so mark it that way now.
(blk_get_aio_context() is an I/O code function.)
With that done, all implementations explicitly are I/O code, so we can
mark bdrv_child_get_parent_aio_context() as I/O code, too, so callers
know it is safe to run from both GS and I/O contexts.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221107151321.211175-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The functions are marked coroutine_fn in the definition.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-6-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hmp_block_resize and hmp_screendump are defined as a ".coroutine = true" command,
so they must be coroutine_fn.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-4-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-11-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No functional changes intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Together with all _can_set_ and _set_ APIs, as they are not needed
anymore.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Minor performance improvement, but given that we have hash tables
available, avoid iterating in the visited nodes list every time just
to check if a node has been already visited.
The data structure is not actually a proper hash map, but an hash set,
as we are just adding nodes and not key,value pairs.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simplify the way the aiocontext can be changed in a BDS graph.
There are currently two problems in bdrv_try_set_aio_context:
- There is a confusion of AioContext locks taken and released, because
we assume that old aiocontext is always taken and new one is
taken inside.
- It doesn't look very safe to call bdrv_drained_begin while some
nodes have already switched to the new aiocontext and others haven't.
This could be especially dangerous because bdrv_drained_begin polls, so
something else could be executed while graph is in an inconsistent
state.
Additional minor nitpick: can_set and set_ callbacks both traverse the
graph, both using the ignored list of visited nodes in a different way.
Therefore, get rid of all of this and introduce a new callback,
change_aio_context, that uses transactions to efficiently, cleanly
and most importantly safely change the aiocontext of a graph.
This new callback is a "merge" of the two previous ones:
- Just like can_set_aio_context, recursively traverses the graph.
Marks all nodes that are visited using a GList, and checks if
they *could* change the aio_context.
- For each node that passes the above check, drain it and add a new transaction
that implements a callback that effectively changes the aiocontext.
- Once done, the recursive function returns if *all* nodes can change
the AioContext. If so, commit the above transactions.
Regardless of the outcome, call transaction.clean() to undo all drains
done in the recursion.
- The transaction list is scanned only after all nodes are being drained, so
we are sure that they all are in the same context, and then
we switch their AioContext, concluding the drain only after all nodes
switched to the new AioContext. In this way we make sure that
bdrv_drained_begin() is always called under the old AioContext, and
bdrv_drained_end() under the new one.
- Because of the above, we don't need to release and re-acquire the
old AioContext every time, as everything is done once (and not
per-node drain and aiocontext change).
Note that the "change" API is not yet invoked anywhere.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221025084952.2139888-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->file and bs->backing are a kind of duplication of part of
bs->children. But very useful diplication, so let's not drop them at
all:)
We should manage bs->file and bs->backing in same place, where we
manage bs->children, to keep them in sync.
Moreover, generic io paths are unprepared to BdrvChild without a bs, so
it's double good to clear bs->file / bs->backing when we detach the
child.
Detach is simple: if we detach bs->file or bs->backing child, just
set corresponding field to NULL.
Attach is a bit more complicated. But we still can precisely detect
should we set one of bs->file / bs->backing or not:
- if role is BDRV_CHILD_COW, we definitely deal with bs->backing
- else, if role is BDRV_CHILD_FILTERED (it must be also
BDRV_CHILD_PRIMARY), it's a filtered child. Use
bs->drv->filtered_child_is_backing to chose the pointer field to
modify.
- else, if role is BDRV_CHILD_PRIMARY, we deal with bs->file
- in all other cases, it's neither bs->backing nor bs->file. It's some
other child and we shouldn't care
OK. This change brings one more good thing: we can (and should) get rid
of all indirect pointers in the block-graph-change transactions:
bdrv_attach_child_common() stores BdrvChild** into transaction to clear
it on abort.
bdrv_attach_child_common() has two callers: bdrv_attach_child_noperm()
just pass-through this feature, bdrv_root_attach_child() doesn't need
the feature.
Look at bdrv_attach_child_noperm() callers:
- bdrv_attach_child() doesn't need the feature
- bdrv_set_file_or_backing_noperm() uses the feature to manage
bs->file and bs->backing, we don't want it anymore
- bdrv_append() uses the feature to manage bs->backing, again we
don't want it anymore
So, we should drop this stuff! Great!
We could probably keep BdrvChild** argument to keep the int return
value, but it seems not worth the complexity.
Finally, we now set .file / .backing automatically in generic code and
want to restring setting them by hand outside of .attach/.detach.
So, this patch cleanups all remaining places where they were set.
To find such places I use:
git grep '\->file ='
git grep '\->backing ='
git grep '&.*\<backing\>'
git grep '&.*\<file\>'
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-14-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the informal rules formal. In further commit we'll add
corresponding assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-8-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_pass_through is used as filter, even all node variables has
corresponding names. We want to append it, so it should be
backing-child-based filter like mirror_top.
So, in test_update_perm_tree, first child should be DATA, as we don't
want filters with two filtered children.
bdrv_exclusive_writer is used as a filter once. So it should be filter
anyway. We want to append it, so it should be backing-child-based
fitler too.
Make all FILTERED children to be PRIMARY as well. We are going to force
this rule by assertion soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-7-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Almost all drivers call bdrv_open_child() similarly. Let's create a
helper for this.
The only not updated drivers that call bdrv_open_child() to set
bs->file are raw-format and snapshot-access:
raw-format sometimes want to have filtered child but
don't set drv->is_filter to true.
snapshot-access wants only DATA | PRIMARY
Possibly we should implement drv->is_filter_func() handler, to consider
raw-format as filter when it works as filter.. But it's another story.
Note also, that we decrease assignments to bs->file in code: it helps
us restrict modifying this field in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-3-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unfortunately not all filters use .file child as filtered child. Two
exclusions are mirror_top and commit_top. Happily they both are private
filters. Bad thing is that this inconsistency is observable through qmp
commands query-block / query-named-block-nodes. So, could we just
change mirror_top and commit_top to use file child as all other filter
driver is an open question. Probably, we could do that with some kind
of deprecation period, but how to warn users during it?
For now, let's just add a field so we can distinguish them in generic
code, it will be used in further commits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-2-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At present there are two callers of get_tmp_filename() and they are
inconsistent.
One does:
/* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
char *tmp_filename = g_malloc0(PATH_MAX + 1);
...
ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
while the other does:
s->qcow_filename = g_malloc(PATH_MAX);
ret = get_tmp_filename(s->qcow_filename, PATH_MAX);
As we can see different 'size' arguments are passed. There are also
platform specific implementations inside the function, and the use
of snprintf is really undesirable.
The function name is also misleading. It creates a temporary file,
not just a filename.
Refactor this routine by changing its name and signature to:
char *create_tmp_file(Error **errp)
and use g_get_tmp_dir() / g_mkstemp() for a consistent implementation.
While we are here, add some comments to mention that /var/tmp is
preferred over /tmp on non-win32 hosts.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221010040432.3380478-2-bin.meng@windriver.com>
[kwolf: Fixed incorrect errno negation and iotest 051]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Registering an I/O buffer is only a performance optimization hint but it
is still necessary to return errors when it fails.
Later patches will need to detect errors when registering buffers but an
immediate advantage is that error_report() calls are no longer needed in
block driver .bdrv_register_buf() functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block drivers may optimize I/O requests accessing buffers previously
registered with bdrv_register_buf(). Checking whether all elements of a
request's QEMUIOVector are within previously registered buffers is
expensive, so we need a hint from the user to avoid costly checks.
Add a BDRV_REQ_REGISTERED_BUF request flag to indicate that all
QEMUIOVector elements in an I/O request are known to be within
previously registered buffers.
Always pass the flag through to driver read/write functions. There is
little harm in passing the flag to a driver that does not use it.
Passing the flag to drivers avoids changes across many block drivers.
Filter drivers would need to explicitly support the flag and pass
through to their children when the children support it. That's a lot of
code changes and it's hard to remember to do that everywhere, leading to
silent reduced performance when the flag is accidentally dropped.
The only problematic scenario with the approach in this patch is when a
driver passes the flag through to internal I/O requests that don't use
the same I/O buffer. In that case the hint may be set when it should
actually be clear. This is a rare case though so the risk is low.
Some drivers have assert(!flags), which no longer works when
BDRV_REQ_REGISTERED_BUF is passed in. These assertions aren't very
useful anyway since the functions are called almost exclusively by
bdrv_driver_preadv/pwritev() so if we get flags handling right there
then the assertion is not needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the enum type so GDB displays the enum members instead of printing a
numeric constant.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only implementor of bdrv_register_buf() is block/nvme.c, where the
size is not needed when unregistering a buffer. This is because
util/vfio-helpers.c can look up mappings by address.
Future block drivers that implement bdrv_register_buf() may not be able
to do their job given only the buffer address. Add a size argument to
bdrv_unregister_buf().
Also document the assumptions about
bdrv_register_buf()/bdrv_unregister_buf() calls. The same <host, size>
values that were given to bdrv_register_buf() must be given to
bdrv_unregister_buf().
gcc 11.2.1 emits a spurious warning that img_bench()'s buf_size local
variable might be uninitialized, so it's necessary to silence the
compiler.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These public functions are not used anywhere, thus can be dropped.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-21-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The same job lock is being used also to protect some of blockjob fields.
Categorize them just as done in job.h.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-15-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just as done with job.h, create _locked() functions in blockjob.h
These functions will be later useful when caller has already taken
the lock. All blockjob _locked functions call job _locked functions.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220926093214.506243-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Same as AIO_WAIT_WHILE macro, but if we are in the Main loop
do not release and then acquire ctx_ 's aiocontext.
Once all Aiocontext locks go away, this macro will replace
AIO_WAIT_WHILE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd_co_establish_connection_cancel() cancels a coroutine but is not called
from coroutine context itself, for example in nbd_cancel_in_flight()
and in timer callbacks reconnect_delay_timer_cb() and open_timer_cb().
Reviewed-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-5-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is only user of bdrv_qiov_is_aligned(), so move the alignment
function to there and make it static.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20220929200523.3218710-2-kbusch@meta.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Return codes of the following functions are never used in the code:
* bdrv_wait_serialising_requests_locked
* bdrv_wait_serialising_requests
* bdrv_make_request_serialising
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Ronnie Sahlberg <ronniesahlberg@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220817083736.40981-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We would have one more place for block_acct_setup() calling, which should
not corrupt original value.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-2-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using the Parfait source code analyser and issue was found in
hw/nvme/ctrl.c where the macros NVME_CAP_SET_CMBS and NVME_CAP_SET_PMRS
are called with a ternary operatore in the second parameter, resulting
in a potentially unexpected expansion of the form:
x ? a: b & FLAG_TEST
which will result in a different result to:
(x ? a: b) & FLAG_TEST.
The macros should wrap each of the parameters in brackets to ensure the
correct result on expansion.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implement Doorbel Buffer Config command (Section 5.7 in NVMe Spec 1.3)
and Shadow Doorbel buffer & EventIdx buffer handling logic (Section 7.13
in NVMe Spec 1.3). For queues created before the Doorbell Buffer Config
command, the nvme_dbbuf_config function tries to associate each existing
SQ and CQ with its Shadow Doorbel buffer and EventIdx buffer address.
Queues created after the Doorbell Buffer Config command will have the
doorbell buffers associated with them when they are initialized.
In nvme_process_sq and nvme_post_cqe, proactively check for Shadow
Doorbell buffer changes instead of wait for doorbell register changes.
This reduces the number of MMIOs.
In nvme_process_db(), update the shadow doorbell buffer value with
the doorbell register value if it is the admin queue. This is a hack
since hosts like Linux NVMe driver and SPDK do not use shadow
doorbell buffer for the admin queue. Copying the doorbell register
value to the shadow doorbell buffer allows us to support these hosts
as well as spec-compliant hosts that use shadow doorbell buffer for
the admin queue.
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Also convert bdrv_pwrite_sync() to being implemented using
generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-9-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
bdrv_{pread,pwrite}() now return -EIO instead of -EINVAL when 'bytes' is
negative, making them consistent with bdrv_{preadv,pwritev}() and
bdrv_co_{pread,pwrite,preadv,pwritev}().
bdrv_pwrite_zeroes() now also calls trace_bdrv_co_pwrite_zeroes() and
clears the BDRV_REQ_MAY_UNMAP flag when appropriate, which it didn't
previously.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220609152744.3891847-8-afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement bdrv_{pread,pwrite}() using generated_co_wrapper.
unsigned int fits in int64_t, so all callers remain correct.
bdrv_check_request32() is called further down the stack and causes -EIO
to be returned if 'bytes' is negative or greater than
BDRV_REQUEST_MAX_BYTES, which in turns never exceeds SIZE_MAX.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220609152744.3891847-7-afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
It does not mutate the buffer.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-6-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
