"smp.cpus" means the number of online CPUs and "smp.max_cpus" means the
total number of CPUs.
riscv_numa_get_default_cpu_node_id() checks "smp.cpus" and the
"available CPUs" description in the next error message also indicates
online CPUs.
So report "smp.cpus" in error_report() instand of "smp.max_cpus".
Since "smp.cpus" is "unsigned int", use "%u".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230718080712.503333-1-zhao1.liu@linux.intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The absence of a satp mode in riscv_host_cpu_init() is causing the
following error:
$ ./qemu/build/qemu-system-riscv64 -machine virt,accel=kvm \
-m 2G -smp 1 -nographic -snapshot \
-kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
**
ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should not be
reached
Bail out! ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should
not be reached
Aborted
The error is triggered from create_fdt_socket_cpus() in hw/riscv/virt.c.
It's trying to get satp_mode_str for a NULL cpu->cfg.satp_mode.map.
For this KVM cpu we would need to inherit the satp supported modes
from the RISC-V host. At this moment this is not possible because the
KVM driver does not support it. And even when it does we can't just let
this broken for every other older kernel.
Since mmu-type is not a required node, according to [1], skip the
'mmu-type' FDT node if there's no satp_mode set. We'll revisit this
logic when we can get satp information from KVM.
[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/riscv/cpus.yaml
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230706101738.460804-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
fdt_load_addr was previously declared as uint32_t which doe not match
with the return type of riscv_compute_fdt_addr().
This patch modifies the fdt_load_addr type from a uint32_t to a uint64_t
to match the riscv_compute_fdt_addr() return type.
This fixes calculating the fdt address when DRAM is mapped to higher
64-bit address.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Lakshmi Bai Raja Subramanian <lakshmi.bai.rajasubramanian@bodhicomputing.com>
[ Change by AF:
- Cleanup commit title and message
]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <168872495192.6334.3845988291412774261-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the devicetree is created before machine initialization is complete,
it misses dynamic devices. Specifically, the tpm device is not added
to the devicetree file and is therefore not instantiated in Linux.
Load/create devicetree in virt_machine_done() to solve the problem.
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.c>
Fixes: 325b7c4e75 hw/riscv: Enable TPM backends
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706035937.1870483-1-linux@roeck-us.net>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Advanced Core Local Interruptor (ACLINT) device can
only be used with TCG. Check for TCG enabled instead of
KVM being not. Only add the property when TCG is used.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629121103.87733-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create the AON device when we realize the sifive_e machine.
This patch only implemented the functionality of the watchdog timer,
not all the functionality of the AON device.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230627141216.3962299-3-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, pflash devices can be configured only via -pflash
or -drive options. This is the legacy way and the
better way is to use -blockdev as in other architectures.
libvirt also has moved to use -blockdev method.
To support -blockdev option, pflash devices need to be
created in instance_init itself. So, update the code to
move the virt_flash_create() to instance_init. Also, use
standard interfaces to detect whether pflash0 is
configured or not.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230601045910.18646-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, virt machine supports two pflash instances each with
32MB size. However, the first pflash is always assumed to
contain M-mode firmware and reset vector is set to this if
enabled. Hence, for S-mode payloads like EDK2, only one pflash
instance is available for use. This means both code and NV variables
of EDK2 will need to use the same pflash.
The OS distros keep the EDK2 FW code as readonly. When non-volatile
variables also need to share the same pflash, it is not possible
to keep it as readonly since variables need write access.
To resolve this issue, the code and NV variables need to be separated.
But in that case we need an extra flash. Hence, modify the convention
for non-KVM guests such that, pflash0 will contain the M-mode FW
only when "-bios none" option is used. Otherwise, pflash0 will contain
the S-mode payload FW. This enables both pflash instances available
for EDK2 use.
When KVM is enabled, pflash0 is always assumed to contain the
S-mode payload firmware only.
Example usage:
1) pflash0 containing M-mode FW
qemu-system-riscv64 -bios none -pflash <mmode_fw> -machine virt
or
qemu-system-riscv64 -bios none \
-drive file=<mmode_fw>,if=pflash,format=raw,unit=0 -machine virt
2) pflash0 containing S-mode payload like EDK2
qemu-system-riscv64 -pflash <smode_fw_code> -pflash <smode_vars> -machine virt
or
qemu-system-riscv64 -bios <opensbi_fw> \
-pflash <smode_fw_code> \
-pflash <smode_vars> \
-machine virt
or
qemu-system-riscv64 -bios <opensbi_fw> \
-drive file=<smode_fw_code>,if=pflash,format=raw,unit=0,readonly=on \
-drive file=<smode_fw_vars>,if=pflash,format=raw,unit=1 \
-machine virt
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230601045910.18646-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Command "qemu-system-riscv64 -machine virt
-m 2G -smp 1 -numa node,mem=1G -numa node,mem=1G"
would trigger this problem.Backtrace with:
#0 0x0000555555b5b1a4 in riscv_numa_get_default_cpu_node_id at ../hw/riscv/numa.c:211
#1 0x00005555558ce510 in machine_numa_finish_cpu_init at ../hw/core/machine.c:1230
#2 0x00005555558ce9d3 in machine_run_board_init at ../hw/core/machine.c:1346
#3 0x0000555555aaedc3 in qemu_init_board at ../softmmu/vl.c:2513
#4 0x0000555555aaf064 in qmp_x_exit_preconfig at ../softmmu/vl.c:2609
#5 0x0000555555ab1916 in qemu_init at ../softmmu/vl.c:3617
#6 0x000055555585463b in main at ../softmmu/main.c:47
This commit fixes the issue by adding parameter checks.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Yin Wang <yin.wang@intel.com>
Message-Id: <20230519023758.1759434-1-yin.wang@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
OpenTitanState is the 'machine' (or 'board') state: it isn't
a SysBus device, but inherits from the MachineState type.
Correct the instance size.
Doing so we avoid leaking an OpenTitanState pointer in
opentitan_machine_init().
Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-6-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expand the DEFINE_MACHINE() macro, converting the class_init()
handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-5-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QOM type names are usually defined as TYPE_FOO.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-4-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. Replace
the type_init() / type_register_static() combination. This
is in preparation of adding the OpenTitan machine type to
this array in a pair of commits.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Follow QOM style which declares FOO_init() as instance
initializer and FOO_class_init() as class initializer:
rename the OpenTitan machine class/instance init()
accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data.
Recgonize the signature section between begin_signature and end_signature symbols
when loading elf of ACT tests. Then dump signature data in signature section just
before the ACT tests exit.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Initialize the ACPI tables if the acpi option is not
disabled.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-8-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V ACPI platforms need to provide RISC-V Hart Capabilities
Table (RHCT). Add this to the ACPI tables.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-7-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add Multiple APIC Description Table (MADT) with the
RINTC structure for each cpu.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-6-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add basic ACPI infrastructure for RISC-V with below tables.
1) DSDT with below basic objects
- CPUs
- fw_cfg
2) FADT revision 6 with HW_REDUCED flag
3) XSDT
4) RSDP
Add this functionality in a new file virt-acpi-build.c and enable
building this infrastructure.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-5-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
memmap needs to be exported outside of virt.c so that
modules like acpi can use it. Hence, add a pointer field
in RiscVVirtState structure and initialize it with the
memorymap.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-4-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI will be enabled by default. Add a switch to turn off
for testing and debug purposes.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-3-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI needs OEM_ID and OEM_TABLE_ID for the machine. Add these fields
in the RISCVVirtState structure and initialize with default values.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-2-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The 'mmu-type' should reflect what the hardware is capable of so use the
new satp_mode field in RISCVCPUConfig to do that.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-6-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cbom-block-size fdt property property is used to inform the OS about
the blocksize in bytes for the Zicbom cache operations. Linux documents
it in Documentation/devicetree/bindings/riscv/cpus.yaml
as:
riscv,cbom-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The blocksize in bytes for the Zicbom cache operations.
cboz-block-size has the same role but for the Zicboz extension, i.e.
informs the size in bytes for Zicboz cache operations. Linux support
for it is under review/approval in [1]. Patch 3 of that series describes
cboz-block-size as:
riscv,cboz-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The blocksize in bytes for the Zicboz cache operations.
[1] https://lore.kernel.org/all/20230224162631.405473-1-ajones@ventanamicro.com/
Cc: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-ID: <20230302091406.407824-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move the dtb load bits outside of create_fdt(), and put it explicitly
in sifive_u_machine_init() and virt_machine_init(). With such change
create_fdt() does exactly what its function name tells us.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Launch qemu-system-riscv64 with a given dtb for 'sifive_u' and 'virt'
machines, QEMU complains:
qemu_fdt_add_subnode: Failed to create subnode /soc: FDT_ERR_EXISTS
The whole DT generation logic should be skipped when a given DTB is
present.
Fixes: b1f19f238c ("hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Read cpu_ptr->cfg.mmu directly. As a bonus, use cpu_ptr in
riscv_isa_string().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-9-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The only remaining caller is riscv_load_kernel_and_initrd() which
belongs to the same file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:
- execute load_kernel()
- load init_rd()
- write kernel_cmdline
Let's fold everything inside riscv_load_kernel() to avoid code
repetition. To not change the behavior of boards that aren't calling
riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and
allow these boards to opt out from initrd loading.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Next patch will move all calls to riscv_load_initrd() to
riscv_load_kernel(). Machines that want to load initrd will be able to
do via an extra flag to riscv_load_kernel().
This change will expose a sign-extend behavior that is happening in
load_elf_ram_sym() when running 32 bit guests [1]. This is currently
obscured by the fact that riscv_load_initrd() is using the return of
riscv_load_kernel(), defined as target_ulong, and this return type will
crop the higher 32 bits that would be padded with 1s by the sign
extension when running in 32 bit targets. The changes to be done will
force riscv_load_initrd() to use an uint64_t instead, exposing it to the
padding when dealing with 32 bit CPUs.
There is a discussion about whether load_elf_ram_sym() should or should
not sign extend the value returned by 'lowaddr'. What we can do is to
prevent the behavior change that the next patch will end up doing.
riscv_load_initrd() wasn't dealing with 64 bit kernel entries when
running 32 bit CPUs, and we want to keep it that way.
One way of doing it is to use target_ulong in 'kernel_entry' in
riscv_load_kernel() and rely on the fact that this var will not be sign
extended for 32 bit targets. Another way is to explictly clear the
higher 32 bits when running 32 bit CPUs for all possibilities of
kernel_entry.
We opted for the later. This will allow us to be clear about the design
choices made in the function, while also allowing us to add a small
comment about what load_elf_ram_sym() is doing. With this change, the
consolation patch can do its job without worrying about unintended
behavioral changes.
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There is no need to declare an intermediate "MachineState *ms".
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206085007.3618715-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a
mem_size (which is defaulted to MachineState::ram_size in all boards)
and the FDT pointer. And it makes a very important assumption: the DRAM
interval dram_base + mem_size is contiguous. This is indeed the case for
most boards that use a FDT.
The Icicle Kit board works with 2 distinct RAM banks that are separated
by a gap. We have a lower bank with 1GiB size, a gap follows, then at
64GiB the high memory starts. MachineClass::default_ram_size for this
board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM
size, meaning that there we'll always have at least 512 MiB in the Hi
RAM area.
Using riscv_compute_fdt_addr() in this board is weird because not only
the board has sparse RAM, and it's calling it using the base address of
the Lo RAM area, but it's also using a mem_size that we have guarantees
that it will go up to the Hi RAM. All the function assumptions doesn't
work for this board.
In fact, what makes the function works at all in this case is a
coincidence. Commit 1a475d39ef introduced a 3GB boundary for the FDT,
down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For
the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000
(2 Gb) and it has a 1Gb size, so it will fall in the conditions to put
the FDT under a 3Gb address, which happens to be exactly at the end of
DRAM_LO. If the base address of the Lo area started later than 3Gb this
function would be unusable by the board. Changing any assumptions inside
riscv_compute_fdt_addr() can also break it by accident as well.
Let's change riscv_compute_fdt_addr() semantics to be appropriate to the
Icicle Kit board and for future boards that might have sparse RAM
topologies to worry about:
- relieve the condition that the dram_base + mem_size area is contiguous,
since this is already not the case today;
- receive an extra 'dram_size' size attribute that refers to a contiguous
RAM block that the board wants the FDT to reside on.
Together with 'mem_size' and 'fdt', which are now now being consumed by a
MachineState pointer, we're able to make clear assumptions based on the
DRAM block and total mem_size available to ensure that the FDT will be put
in a valid RAM address.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/dtb by using that address.
riscv_load_fdt() is doing a bit too much in comparison. It's calculating
the fdt address via an elaborated heuristic to put the FDT at the bottom
of DRAM, and "bottom of DRAM" will vary across boards and
configurations, then it's actually loading the fdt, and finally it's
returning the fdt address used to the caller.
Reduce the existing complexity of riscv_load_fdt() by splitting its code
into a new function, riscv_compute_fdt_addr(), that will take care of
all fdt address logic. riscv_load_fdt() can then be a simple function
that just loads a fdt at the given fdt address.
We're also taken the opportunity to clarify the intentions and
assumptions made by these functions. riscv_load_fdt() is now receiving a
hwaddr as fdt_addr because there is no restriction of having to load the
fdt in higher addresses that doesn't fit in an uint32_t.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
fdt_pack() can change the fdt size, meaning that fdt_totalsize() can
contain a now deprecated (bigger) value.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Follow the QEMU convention of naming MachineState pointers as 'ms' by
renaming the instances where we're calling it 'mc'.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a convention in other QEMU boards/archs to name MachineState
pointers as either 'machine' or 'ms'. MachineClass pointers are usually
called 'mc'.
The 'virt' RISC-V machine has a lot of instances where MachineState
pointers are named 'mc'. There is nothing wrong with that, but we gain
more compatibility with the rest of the QEMU code base, and easier
reviews, if we follow QEMU conventions.
Rename all 'mc' MachineState pointers to 'ms'. This is a very tedious
and mechanical patch that was produced by doing the following:
- find/replace all 'MachineState *mc' to 'MachineState *ms';
- find/replace all 'mc->fdt' to 'ms->fdt';
- find/replace all 'mc->smp.cpus' to 'ms->smp.cpus';
- replace any remaining occurrences of 'mc' that the compiler complained
about.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_socket_count() returns either ms->numa_state->num_nodes or 1
depending on NUMA support. In any case the value can be retrieved only
once and used in the rest of the function.
This will also alleviate the rename we're going to do next by reducing
the instances of MachineState 'mc' inside hw/riscv/virt.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the CSRs and CSR instructions are disabled because the Zicsr
extension isn't enabled then we want to make sure we don't run any CSR
instructions in the boot ROM.
This patches removes the CSR instructions from the reset-vec if the
extension isn't enabled. We replace the instruction with a NOP instead.
Note that we don't do this for the SiFive U machine, as we are modelling
the hardware in that case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1447
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230123035754.75553-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Updates the opentitan IRQs to match the latest supported commit of
Opentitan from TockOS.
OPENTITAN_SUPPORTED_SHA := 565e4af39760a123c59a184aa2f5812a961fde47
Memory layout as per [1]
[1] 565e4af397/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230123063619.222459-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 1c20d3ff60 ("hw/riscv: virt: Add a machine done notifier")
moved the initialization of fw_cfg to the virt_machine_done() callback.
Problem is that the validation of fw_cfg by devices such as ramfb is
done before the machine done notifier is called. Moving create_fw_cfg()
to machine_done() results in QEMU failing to boot when using a ramfb
device:
./qemu-system-riscv64 -machine virt -device ramfb -serial stdio
qemu-system-riscv64: -device ramfb: ramfb device requires fw_cfg with DMA
The fix is simple: move create_fw_cfg() config back to
virt_machine_init(). This happens to be the same way the ARM 'virt'
machine deals with fw_cfg (see machvirt_init() and virt_machine_done()
in hw/arm/virt.c), so we're keeping consistency with how other machines
handle this device.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1343
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117132751.229738-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's no need to use a MachineState pointer and a fdt pointer now that
all RISC-V machines are using the FDT from the MachineState.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_socket_cpus() writes a different 'mmu-type' value if we're
running in 32 or 64 bits. However, the flag is being calculated during
virt_machine_init(), and is passed around in create_fdt(), then
create_fdt_socket(), and then finally create_fdt_socket_cpus(). None of
the intermediate functions are using the flag, which is a bit
misleading.
Remove 'is_32_bit' flag from create_fdt_socket_cpus() and calculate it
using the already available RISCVVirtState pointer. This will also
change the signature of create_fdt_socket() and create_fdt(), making it
clear that these functions don't do anything special when we're running
in 32 bit mode.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'cmdline' isn't being used. Remove it.
A MachineState pointer is being retrieved via a MACHINE() macro calling
qdev_get_machine(). Use MACHINE(s) instead to avoid calling qdev().
'mem_size' is being set as machine->ram_size by the caller. Retrieve it
via ms->ram_size.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'mem_size' and 'cmdline' aren't being used. Remove them.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'mem_size' and 'cmdline' are unused.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All callers are using kernel_filename as machine->kernel_filename.
This will also simplify the changes in riscv_load_kernel() that we're
going to do next.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The sifive_u, spike and virt machines are writing the 'bootargs' FDT
node during their respective create_fdt().
Given that bootargs is written only when '-append' is used, and this
option is only allowed with the '-kernel' option, which in turn is
already being check before executing riscv_load_kernel(), write
'bootargs' in the same code path as riscv_load_kernel().
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being used
just to write the initrd FDT node. Every existing caller of
riscv_load_initrd() is writing the FDT in the same manner.
We can simplify things by writing the FDT inside riscv_load_initrd(),
sparing callers from having to manage start/end addrs to write the FDT
themselves.
An 'if (fdt)' check is already inserted at the end of the function
because we'll end up using it later on with other boards that doesn´t
have a FDT.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This will make the code more in line with what the other boards are
doing. We'll also avoid an extra check to machine->kernel_filename since
we already checked that before executing riscv_load_kernel().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_firmware(), riscv_load_initrd() and riscv_load_kernel() works
under the assumption that a 'filename' parameter is always not NULL.
This is currently the case since all callers of these functions are
checking for NULL before calling them. Add an g_assert() to make sure
that a NULL value in these cases are to be considered a bug.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SiFiveUState and use MachineState::fdt
instead.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SpikeState and use MachineState::fdt
instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present create_fdt() calls htif_uses_elf_symbols() to determine
whether to insert a <reg> property for the HTIF. This unfortunately
creates a hidden dependency to riscv_load_{firmware,kernel} that
create_fdt() must be called after the ELF {firmware,kernel} image
has been loaded.
Decouple such dependency be adding a new parameter to create_fdt(),
whether custom HTIF base address is used. The flag will be set if
non ELF {firmware,kernel} image is given by user.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rename previous riscv_find_firmware() to riscv_find_bios(), and
introduce a new riscv_find_firmware() to implement the first half
part of the work done in riscv_find_and_load_firmware().
This new API is helpful for machine that wants to know the final
chosen firmware file name but does not want to load it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some boards are duplicating the 'riscv_find_and_load_firmware' call
because the 32 and 64 bits images have different names. Create
a function to handle this detail instead of hardcoding it in the boards.
Ideally we would bake this logic inside riscv_find_and_load_firmware(),
or even create a riscv_load_default_firmware(), but at this moment we
cannot infer whether the machine is running 32 or 64 bits without
accessing RISCVHartArrayState, which in turn can't be accessed via the
common code from boot.c. In the end we would exchange 'firmware_name'
for a flag with riscv_is_32bit(), which isn't much better than what we
already have today.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-6-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-11-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The only caller is riscv_find_and_load_firmware(), which is in the same
file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-5-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-10-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Spike machine now supports OpenSBI plain binary bios image, so the
comments are no longer valid.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-9-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really
be put in the HTIFState struct as it is only meaningful to HTIF.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
struct HTIFState has 3 members for address space and memory region,
and are initialized during htif_mm_init(). But they are actually
useless. Drop them.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"hartid-base" and "priority-base" are zero by default. There is no
need to initialize them to zero again.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-15-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
changed the value of VIRT_IRQCHIP_NUM_SOURCES from 127 to 53, which
is VIRTIO_NDEV and also used as the value of "riscv,ndev" property
in the dtb. Unfortunately this is wrong as VIRT_IRQCHIP_NUM_SOURCES
should include interrupt source 0 but "riscv,ndev" does not.
While we are here, we also fix the comments of platform bus irq range
which is now "64 to 96", but should be "64 to 95", introduced since
commit 1832b7cb3f ("hw/riscv: virt: Create a platform bus").
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present magic number is used to create "riscv,ndev" property
in the dtb. Let's use the macro SIFIVE_U_PLIC_NUM_SOURCES that
is used to instantiate the PLIC model instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PLIC is not included in the 'spike' machine.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-5-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SHAKTI_C machine Kconfig option was inserted in disorder. Fix it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit ef63100648 ("hw/riscv: opentitan: Update to the latest build")
the IBEX PLIC model was replaced with the SiFive PLIC model in the
'opentitan' machine but we forgot the add the dependency there.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-3-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in sifive_plic_realize().
Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from
RISC-V machines.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The system controller on PolarFire SoC is access via a mailbox. The
control registers for this mailbox lie in the "IOSCB" region & the
interrupt is cleared via write to the "SYSREG" region. It also has a
QSPI controller, usually connected to a flash chip, that is used for
storing FPGA bitstreams and used for In-Application Programming (IAP).
Linux has an implementation of the system controller, through which the
hwrng is accessed, leading to load/store access faults.
Add the QSPI as unimplemented and a very basic (effectively
unimplemented) version of the system controller's mailbox. Rather than
purely marking the regions as unimplemented, service the mailbox
requests by reporting failures and raising the interrupt so a guest can
better handle the lack of support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221117225518.4102575-4-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Fabric Interconnect Controllers provide interfaces between the FPGA
fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered
0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and
does not show up on the MSS memory map. FIC4 is dedicated to the User
Crypto Processor and does not show up on the MSS memory map either.
FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1
are represented in QEMU, leading to load access violations while booting
Linux for Icicle if PCIe is enabled as the root port is connected via
either FIC 0 or 1.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-3-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The imsic DT binding[1] has changed and no longer require an ipi-id.
The latest IMSIC driver dynamically allocates ipi id if slow-ipi
is not defined.
Get rid of the unused dt property which may lead to confusion.
[1] https://lore.kernel.org/lkml/20221111044207.1478350-5-apatel@ventanamicro.com/
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221122080529.1692533-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adds the updated `aon_timer` base as an unimplemented device. This is
used by TockOS, patch ensures the guest doesn't hit load faults.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221025043335.339815-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch updates the OpenTitan model to match
the specified register layout as per [1]. Which is also the latest
commit of OpenTitan supported by TockOS.
Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes
any references to Padctrl. Note: OpenTitan doc [2] has not yet specified
much detail regarding this, except for a note that states `TODO: this
section needs to be updated to reflect the pinmux/padctrl merger`
[1] d072ac505f/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h
[2] https://docs.opentitan.org/hw/top_earlgrey/doc/design/
[3] https://docs.opentitan.org/hw/ip/pinmux/doc/#overview
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221025043335.339815-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the system reboots, the rng-seed that the FDT has should be
re-randomized, so that the new boot gets a new seed. Since the FDT is in
the ROM region at this point, we add a hook right after the ROM has been
added, so that we have a pointer to that copy of the FDT.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: qemu-riscv@nongnu.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221025004327.568476-6-Jason@zx2c4.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will enable support for the 'dumpdtb' QMP/HMP command for the spike
machine.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-16-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the sifive_u
machine.
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-15-danielhb413@gmail.com>
To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.
When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.
If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.
In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To enable both -kernel and -pflash options, the fw_cfg needs to be
created prior to loading the kernel.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 4211fc5532 ("roms/opensbi: Remove ELF images"), the
comment for qtest check in riscv_find_firmware() is out of date.
Update it to reflect the latest status.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <BN7PR08MB435525C92550BAC5467BE672BF219@BN7PR08MB4355.namprd08.prod.outlook.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On the OpenTitan hardware the resetvec is fixed at the start of ROM. In
QEMU we don't run the ROM code and instead just jump to the next stage.
This means we need to be a little more flexible about what the resetvec
is.
This patch allows us to set the resetvec from the command line with
something like this:
-global driver=riscv.lowrisc.ibex.soc,property=resetvec,value=0x20000400
This way as the next stage changes we can update the resetvec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914101108.82571-4-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The resetvec for the OpenTitan machine ended up being set to an out of
date value, so let's fix that and bump it to the correct start address
(after the boot ROM)
Fixes: bf8803c64d "hw/riscv: opentitan: bump opentitan version"
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220914101108.82571-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu virt machine can support few cache events and cycle/instret counters.
It also supports counter overflow for these events.
Add a DT node so that OpenSBI/Linux kernel is aware of the virt machine
capabilities. There are some dummy nodes added for testing as well.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).
Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)
Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reset and poweroff features of the syscon were originally added to
top level, which is a valid path for a syscon subnode. Subsequently a
reorganisation was carried out while implementing NUMA in which the
subnodes were moved into the /soc node. As /soc is a "simple-bus", this
path is invalid, and so dt-validate produces the following warnings:
/stuff/qemu/qemu.dtb: soc: poweroff: {'value': [[21845]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-poweroff']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
/stuff/qemu/qemu.dtb: soc: reboot: {'value': [[30583]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-reboot']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
Move the syscon subnodes back to the top level and silence the warnings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220810184612.157317-4-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 18df0b4695 ("hw/riscv: virt: Allow creating multiple NUMA sockets")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"uart" is not a node name that complies with the dt-schema.
Change the node name to "serial" to ix warnings seen during
dt-validate on a dtbdump of the virt machine such as:
/stuff/qemu/qemu.dtb: uart@10000000: $nodename:0: 'uart@10000000' does not match '^serial(@.*)?$'
From schema: /stuff/linux/Documentation/devicetree/bindings/serial/8250.yaml
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-2-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 04331d0b56 ("RISC-V VirtIO Machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220613115810.178210-1-Jason@zx2c4.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We previously stored the device tree at a 16MB alignment from the end of
memory (or 3GB). This means we need at least 16MB of memory to be able
to do this. We don't actually need the FDT to be 16MB aligned, so let's
drop it down to 2MB so that we can support systems with less memory,
while also allowing FDT size expansion.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/992
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220608062015.317894-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Various loader functions return an int which limits images to 2GB which
is fine for things like a BIOS/kernel image, but if we want to be able
to load memory images or large ramdisks then any file over 2GB would
silently fail to load.
Cc: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211111141141.3295094-2-jamie@nuviainc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
fw_cfg DT node is generated after the create_fdt without any check
if the DT is being loaded from the commandline. This results in
FDT_ERR_EXISTS error if dtb is loaded from the commandline.
Generate fw_cfg node only if the DT is not loaded from the commandline.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220526203500.847165-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When both APLIC and IMSIC are present in virt machine, the APLIC should
be used as parent interrupt controller for dynamic platform devices.
In case of multiple sockets, we should prefer interrupt controller of
socket0 for dynamic platform devices.
Fixes: 3029fab643 ("hw/riscv: virt: Add support for generating
platform FDT entries")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-9-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The QOM API already provides accessors for uint32 values, so reuse them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220301225220.239065-3-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
sifive_e/u and opentitan machines. It now just prints error message and
quits (without coredumps and aborts).
This is separate from spike/virt because it involves different type
(TYPE_RISCV_HART_ARRAY) on sifive_e/u and opentitan machines.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <09e61e58a7543da44bdb0e0f5368afc8903b4aa6.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
