Delay to close COLO for auto start VM after failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190303145021.2962-4-chen.zhang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In migration_incoming_state_destroy(void) will check the mis->to_src_file
to double close the mis->to_src_file when occur COLO failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190303145021.2962-2-chen.zhang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the
code accordingly.
Made conditional:
* xen-set-replication, query-xen-replication-status,
xen-colo-do-checkpoint
Before the patch, we first register the commands unconditionally in
generated code (requires a stub), then conditionally unregister in
qmp_unregister_commands_hack().
Afterwards, we register only when CONFIG_REPLICATION. The command
fails exactly the same, with CommandNotFound.
Improvement, because now query-qmp-schema is accurate, and we're one
step closer to killing qmp_unregister_commands_hack().
* enum BlockdevDriver value "replication" in command blockdev-add
* BlockdevOptions variant @replication
and related structures.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-23-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This compilation issue will occur when user use --disable-replication
to config Qemu.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Message-Id: <20181101021226.6353-1-zhangckid@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
COLO thread may sleep at qemu_sem_wait(&s->colo_checkpoint_sem),
while failover works begin, It's better to wakeup it to quick
the process.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Notify all net filters about the checkpoint and failover event.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There are several stages during loadvm/savevm process. In different stage,
migration incoming processes different types of sections.
We want to control these stages more accuracy, it will benefit COLO
performance, we don't have to save type of QEMU_VM_SECTION_START
sections everytime while do checkpoint, besides, we want to separate
the process of saving/loading memory and devices state.
So we add three new helper functions: qemu_load_device_state() and
qemu_savevm_live_state() to achieve different process during migration.
Besides, we make qemu_loadvm_state_main() and qemu_save_device_state()
public, and simplify the codes of qemu_save_device_state() by calling the
wrapper qemu_savevm_state_header().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Libvirt or other high level software can use this command query colo status.
You can test this command like that:
{'execute':'query-colo-status'}
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Suggested by Markus Armbruster rename COLO unknown mode to none mode.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If some errors happen during VM's COLO FT stage, it's important to
notify the users of this event. Together with 'x-colo-lost-heartbeat',
Users can intervene in COLO's failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need to know if migration is going into COLO state for
incoming side before start normal migration.
Instead by using the VMStateDescription to send colo_state
from source side to destination side, we use MIG_CMD_ENABLE_COLO
to indicate whether COLO is enabled or not.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make sure master start block replication after slave's block
replication started.
Besides, we need to activate VM's blocks before goes into
COLO state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
For COLO FT, both the PVM and SVM run at the same time,
only sync the state while it needs.
So here, let SVM runs while not doing checkpoint, change
DEFAULT_MIGRATE_X_CHECKPOINT_DELAY to 200*100.
Besides, we forgot to release colo_checkpoint_semd and
colo_delay_timer, fix them here.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch implements bi-directional RDMA QIOChannel. Because different
threads may access RDMAQIOChannel currently, this patch use RCU to protect it.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"),
colo is always supported. We don't need any colo_supported() now since
it is always true. Removing any extra code that depends on it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Previously, dst side will immediately try to lock the write byte upon
receiving QEMU_VM_EOF, but at src side, bdrv_inactivate_all() is only
done after sending it. If the src host is under load, dst may fail to
acquire the lock due to racing with the src unlocking it.
Fix this by hoisting the bdrv_inactivate_all() operation before
QEMU_VM_EOF.
N.B. A further improvement could possibly be done to cleanly handover
locks between src and dst, so that there is no window where a third QEMU
could steal the locks and prevent src and dst from running.
N.B. This commit includes a minor improvement to the error handling
by using qemu_file_set_error().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170616160658.32290-1-famz@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[PMM: noted qemu_file_set_error() use in commit as suggested by Daniel]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
All functions were internal, except blk_mig_init() that is exported in
misc.h now.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Split the file into public and internal interfaces. I have to rename
the external one because we can't have two include files with the same
name in the same directory. Build system gets confused. The only
exported functions are the ones that handle basic types.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This removes last trace of migration functions from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
We want to track why a guest was shutdown; in particular, being able
to tell the difference between a guest request (such as ACPI request)
and host request (such as SIGINT) will prove useful to libvirt.
Since all requests eventually end up changing shutdown_requested in
vl.c, the logical change is to make that value track the reason,
rather than its current 0/1 contents.
Since command-line options control whether a reset request is turned
into a shutdown request instead, the same treatment is given to
reset_requested.
This patch adds an internal enum ShutdownCause that describes reasons
that a shutdown can be requested, and changes qemu_system_reset() to
pass the reason through, although for now nothing is actually changed
with regards to what gets reported. The enum could be exported via
QAPI at a later date, if deemed necessary, but for now, there has not
been a request to expose that much detail to end clients.
For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into
SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough
information right now to use a different value is when we are reacting
to a host signal. It will take a further patch to edit all call-sites
that can trigger a reset or shutdown request to properly pass in any
other reasons; this patch includes TODOs to point such places out.
qemu_system_reset() trades its 'bool report' parameter for a
'ShutdownCause reason', with all non-zero values having the same
effect; this lets us get rid of the weird #defines for VMRESET_*
as synonyms for bools.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Not used anymore after moving block migration to use capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We have change in the previous patch to use migration capabilities for
it. Notice that we continue using the old command line flags from
migrate command from the time being. Remove the set_params method as
now it is empty.
For savevm, one can't do a:
savevm -b/-i foo
but now one can do:
migrate_set_capability block on
savevm foo
And we can't use block migration. We could disable block capability
unconditionally, but it would not be much better.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- Maintain shared/enabled dependency (Xu suggestion)
- Now we maintain the dependency on the setter functions
- improve error messages
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We should not do failover work while the main thread is loading
VM's state. Otherwise the consistent of VM's memory and
device state will be broken.
We will restart the loading process after jump over the stage,
The new failover status 'RELAUNCH' will help to record if we
need to restart the process.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added a missing '(Since 2.9)'
If the net connection between primary host and secondary host breaks
while COLO/COLO incoming threads are doing read() or write().
It will block until connection is timeout, and the failover process
will be blocked because of it.
So it is necessary to shutdown all the socket fds used by COLO
to avoid this situation. Besides, we should close the corresponding
file descriptors after failvoer BH shutdown them,
Or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we set checkpoint-delay through command 'migrate-set-parameters',
It will not take effect until we finish last sleep chekpoint-delay,
That's will be offensive espeically when we want to change its value
from an extreme big one to a proper value.
Fix it by using timer to realize checkpoint-delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1484657864-21708-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Some older GCC versions (e.g. 4.4.7) report a warning on an
uninitialized variable for 'request', even though all possible code
paths that reference 'request' will be initialized. To appease
these versions, initialize the variable to 0.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 259818682e41b95ae60f1423b87954a3fe377639.1477950393.git.jcody@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
If users require SVM to takeover work, COLO incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
For primary side, if COLO gets failover request from users.
To be exact, gets 'x_colo_lost_heartbeat' command.
COLO thread will exit the loop while the failover BH does the
cleanup work and resumes VM.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Do checkpoint periodically, the default interval is 200ms.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We should not destroy the state of SVM (Secondary VM) until we receive
the complete data of PVM's state, in case the primary fails in the process
of sending the state, so we cache the VM's state in secondary side before
load it into SVM.
Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
VM checkpointing is to synchronize the state of PVM to SVM, just
like migration does, we re-use save helpers to achieve migrating
PVM's state to Secondary side.
COLO need to cache the data of VM's state in the secondary side before
synchronize it to SVM. COLO need the size of the data to determine
how much data should be read in the secondary side.
So here, we can get the size of the data by saving it into I/O channel
before send it to the secondary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We need communications protocol of user-defined to control
the checkpointing process.
The new checkpointing request is started by Primary VM,
and the interactive process like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
This new communication path will be used for returning messages
from Secondary side to Primary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.
We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
