Implement the MVE VRINT insns, which round floating point inputs
to integer values, leaving them in floating point format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT instruction which converts between single
and half precision floating point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT which converts from floating-point to integer
using a rounding mode specified by the instruction. We implement
this similarly to the Neon equivalents, by passing the required
rounding mode as an extra integer parameter to the helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT insns which convert between floating and fixed
point. As with the Neon equivalents, these use essentially the same
constant encoding as right-shift-by-immediate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp scalar comparisons VCMP and VPT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp vector comparisons VCMP and VPT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMV, VMINNMV, VMAXNMAV, VMINNMAV insns. These
calculate the maximum or minimum of floating point elements across a
vector, starting with a value in a general purpose register and
returning the result there.
The pseudocode silences a possible SNaN in the accumulating result
on every iteration (by calling FPConvertNaN), but we do it only
on the input ra, because if none of the inputs to float*_maxnum
or float*_minnum are SNaNs then the result can't be an SNaN.
Note that we can't use the float*_maxnuma() etc functions we defined
earlier for VMAXNMA and VMINNMA, because we mustn't take the absolute
value of the starting general-purpose register value, which could be
negative.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE fp-with-scalar VFMA and VFMAS insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE scalar floating point insns VADD, VSUB and VMUL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMA and VMINNMA insns; these are 2-operand, but
the destination register must be the same as one of the source
registers.
We defer the decode of the size in bit 28 to the individual insn
patterns rather than doing it in the format, because otherwise we
would have a single insn pattern that overlapped with two groups (eg
VMAXNMA with the VMULH_S and VMULH_U groups). Having two insn
patterns per insn seems clearer than a complex multilevel nesting
of overlapping and non-overlapping groups.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCMUL and VCMLA insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VFMA and VFMS insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCADD insn. Note that here the size bit is the
opposite sense to the other 2-operand fp insns.
We don't check for the sz == 1 && Qd == Qm UNPREDICTABLE case,
because that would mean we can't use the DO_2OP_FP macro in
translate-mve.c.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement more simple 2-operand floating point MVE insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VADD (floating-point) insn. Handling of this is
similar to the 2-operand integer insns, except that we must take care
to only update the floating point exception status if the least
significant bit of the predicate mask for each element is active.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE interleaving load/store functions VLD2, VLD4, VST2
and VST4. VLD2 loads 16 bytes of data from memory and writes to 2
consecutive Qregs; VLD4 loads 16 bytes of data from memory and writes
to 4 consecutive Qregs. The 'pattern' field in the encoding
determines the offset into memory which is accessed and also which
elements in the Qregs are written to. (The intention is that a
sequence of four consecutive VLD4 with different pattern values
performs a complete de-interleaving load of 64 bytes into all
elements of the 4 Qregs.) VST2 and VST4 do the same, but for stores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VLDR/VSTR insns which do scatter-gather using base
addresses from Qm plus or minus an immediate offset (possibly with
writeback). Note that writeback is not predicated but it does have
to honour ECI state, so we have to add an eci_mask check to the
VSTR_SG macros (the VLDR_SG macros already needed this to be able
to distinguish "skip beat" from "set predicated element to 0").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE gather-loads and scatter-stores which
form the address by adding a base value from a scalar
register to an offset in each element of a vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCTP insn, which sets the VPR.P0 predicate bits so
as to predicate any element at index Rn or greater is predicated. As
with VPNOT, this insn itself is predicable and subject to beatwise
execution.
The calculation of the mask is the same as is used to determine
ltpmask in mve_element_mask(), but we precalculate masklen in
generated code to avoid having to have 4 helpers specialized by size.
We put the decode line in with the low-overhead-loop insns in
t32.decode because it's logically part of that collection of insn
patterns, even though it is an MVE only insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VPNOT insn, which inverts the bits in VPR.P0
(subject to both predication and to beatwise execution).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXA and VMINA insns, which take the absolute
value of the signed elements in the input vector and then accumulate
the unsigned max or min into the destination vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE 1-operand saturating operations VQABS and VQNEG.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE saturating doubling multiply accumulate insns
VQDMLAH, VQRDMLAH, VQDMLASH and VQRDMLASH. These perform a multiply,
double, add the accumulator shifted by the element size, possibly
round, saturate to twice the element size, then take the high half of
the result. The *MLAH insns do vector * scalar + vector, and the
*MLASH insns do vector * vector + scalar.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLA insn, which multiplies a vector by a scalar
and accumulates into another vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLADAV and VMLSLDAV insns. Like the VMLALDAV and
VMLSLDAV insns already implemented, these accumulate multiplied
vector elements; but they accumulate a 32-bit result rather than a
64-bit one.
Note that these encodings overlap with what would be RdaHi=0b111 for
VMLALDAV, VMLSLDAV, VRMLALDAVH and VRMLSLDAVH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE narrowing move insns VMOVN, VQMOVN and VQMOVUN.
These take a double-width input, narrow it (possibly saturating) and
store the result to either the top or bottom half of the output
element.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VABAV insn, which computes absolute differences
between elements of two vectors and accumulates the result into
a general purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer min/max across vector insns
VMAXV, VMINV, VMAXAV and VMINAV, which find the maximum
from the vector elements and a general purpose register,
and store the maximum back into the general purpose
register.
These insns overlap with VRMLALDAVH (they use what would
be RdaHi=0b110).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE instructions which perform shifts by a scalar.
These are VSHL T2, VRSHL T2, VQSHL T1 and VQRSHL T2. They take the
shift amount in a general purpose register and shift every element in
the vector by that amount.
Mostly we can reuse the helper functions for shift-by-immediate; we
do need two new helpers for VQRSHL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLAS insn, which multiplies a vector by a vector
and adds a scalar.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VPSEL insn, which sets each byte of the destination
vector Qd to the byte from either Qn or Qm depending on the value of
the corresponding bit in VPR.P0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer vector comparison instructions that compare
each element against a scalar from a general purpose register. These
are "VCMP (vector)" encodings T4, T5 and T6 and "VPT (vector)"
encodings T4, T5 and T6.
We have to move the decodetree pattern for VPST, because it
overlaps with VCMP T4 with size = 0b11.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer vector comparison instructions. These are
"VCMP (vector)" encodings T1, T2 and T3, and "VPT (vector)" encodings
T1, T2 and T3.
These insns compare corresponding elements in each vector, and update
the VPR.P0 predicate bits with the results of the comparison. VPT
also sets the VPR.MASK01 and VPR.MASK23 fields -- it is effectively
"VCMP then VPST".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE incrementing/decrementing dup insns VIDUP, VDDUP,
VIWDUP and VDWDUP. These fill the elements of a vector with
successively incrementing values, starting at the offset specified in
a general purpose register. The final value of the offset is written
back to this register. The wrapping variants take a second general
purpose register which specifies the point where the count should
wrap back to 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMULL (polynomial) insn. Unlike Neon, this comes
in two flavours: 8x8->16 and a 16x16->32. Also unlike Neon, the
inputs are in either the low or the high half of each double-width
element.
The assembler for this insn indicates the size with "P8" or "P16",
encoded into bit 28 as size = 0 or 1. We choose to follow the
same encoding as VQDMULL and decode this into a->size as MO_16
or MO_32 indicating the size of the result elements. This then
carries through to the helper function names where it then
matches up with the existing pmull_h() which does an 8x8->16
operation and a new pmull_w() which does the 16x16->32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE shifts by register, which perform
shifts on a single general-purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-19-peter.maydell@linaro.org
Implement the MVE shifts by immediate, which perform shifts
on a single general-purpose register.
These patterns overlap with the long-shift-by-immediates,
so we have to rearrange the grouping a little here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-18-peter.maydell@linaro.org
Implement the MVE long shifts by register, which perform shifts on a
pair of general-purpose registers treated as a 64-bit quantity, with
the shift count in another general-purpose register, which might be
either positive or negative.
Like the long-shifts-by-immediate, these encodings sit in the space
that was previously the UNPREDICTABLE MOVS/ORRS with Rm==13,15.
Because LSLL_rr and ASRL_rr overlap with both MOV_rxri/ORR_rrri and
also with CSEL (as one of the previously-UNPREDICTABLE Rm==13 cases),
we have to move the CSEL pattern into the same decodetree group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-17-peter.maydell@linaro.org
The MVE extension to v8.1M includes some new shift instructions which
sit entirely within the non-coprocessor part of the encoding space
and which operate only on general-purpose registers. They take up
the space which was previously UNPREDICTABLE MOVS and ORRS encodings
with Rm == 13 or 15.
Implement the long shifts by immediate, which perform shifts on a
pair of general-purpose registers treated as a 64-bit quantity, with
an immediate shift count between 1 and 32.
Awkwardly, because the MOVS and ORRS trans functions do not UNDEF for
the Rm==13,15 case, we need to explicitly emit code to UNDEF for the
cases where v8.1M now requires that. (Trying to change MOVS and ORRS
is too difficult, because the functions that generate the code are
shared between a dozen different kinds of arithmetic or logical
instruction for all A32, T16 and T32 encodings, and for some insns
and some encodings Rm==13,15 are valid.)
We make the helper functions we need for UQSHLL and SQSHLL take
a 32-bit value which the helper casts to int8_t because we'll need
these helpers also for the shift-by-register insns, where the shift
count might be < 0 or > 32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-16-peter.maydell@linaro.org
Implement the MVE VADDLV insn; this is similar to VADDV, except
that it accumulates 32-bit elements into a 64-bit accumulator
stored in a pair of general-purpose registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-15-peter.maydell@linaro.org
Implement the MVE VSHLC insn, which performs a shift left of the
entire vector with carry in bits provided from a general purpose
register and carry out bits written back to that register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-14-peter.maydell@linaro.org
Implement the MVE saturating shift-right-and-narrow insns
VQSHRN, VQSHRUN, VQRSHRN and VQRSHRUN.
do_srshr() is borrowed from sve_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-13-peter.maydell@linaro.org
Implement the MVE shift-right-and-narrow insn VSHRN and VRSHRN.
do_urshr() is borrowed from sve_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-12-peter.maydell@linaro.org
Implement the MVE VSRI and VSLI insns, which perform a
shift-and-insert operation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-11-peter.maydell@linaro.org
Implement the MVE VHLL (vector shift left long) insn. This has two
encodings: the T1 encoding is the usual shift-by-immediate format,
and the T2 encoding is a special case where the shift count is always
equal to the element size.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-10-peter.maydell@linaro.org
Implement the MVE vector shift right by immediate insns VSHRI and
VRSHRI. As with Neon, we implement these by using helper functions
which perform left shifts but allow negative shift counts to indicate
right shifts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-9-peter.maydell@linaro.org
Implement the MVE shift-vector-left-by-immediate insns VSHL, VQSHL
and VQSHLU.
The size-and-immediate encoding here is the same as Neon, and we
handle it the same way neon-dp.decode does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-8-peter.maydell@linaro.org
Implement the MVE logical-immediate insns (VMOV, VMVN,
VORR and VBIC). These have essentially the same encoding
as their Neon equivalents, and we implement the decode
in the same way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-7-peter.maydell@linaro.org
Implement the MVE VADDV insn, which performs an addition
across vector lanes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-44-peter.maydell@linaro.org
Implement the MVE VHCADD insn, which is similar to VCADD
but performs a halving step. This one overlaps with VADC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-43-peter.maydell@linaro.org
