We want to allow the psci-conduit property to be set after realize,
because the parts of the code which are best placed to decide if it's
OK to enable QEMU's builtin PSCI emulation (the board code and the
arm_load_kernel() function are distant from the code which creates
and realizes CPUs (typically inside an SoC object's init and realize
method) and run afterwards.
Since the DEFINE_PROP_* macros don't have support for creating
properties which can be changed after realize, change the property to
be created with object_property_add_uint32_ptr(), which is what we
already use in this function for creating settable-after-realize
properties like init-svtor and init-nsvtor.
Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset. (It would also require the underlying state to
be migrated, which we don't do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-2-peter.maydell@linaro.org
'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for
avoiding the situation where one of the models incorrectly deasserts an
interrupt asserted from the other model (which will result in that the IRQ
is lost and will not reach guest SW).
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220203151742.1457-1-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the named bit rather than a bare extract32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When HCR_EL2.E2H is set, the format of CPTR_EL2 changes to
look more like CPACR_EL1, with ZEN and FPEN fields instead
of TZ and TFP fields.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220127063428.30212-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract entire fields for ZEN and FPEN, rather than testing specific bits.
This makes it easier to follow the code versus the ARM spec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Part of ACPI ERST support
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmH/lpgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpntwH+LTJ3MIX5tHL2FWR9vfQoIOQms4A2YJb5GFv
f/wZMQ4Hx/4k3KsicJF4ONJ04cT4IuxtsY9WtUroNcpuh9qy+cMYw61xsd7oa2DB
k7vInrVaDP1pKmNzK+R1DV4VsbghAZzCh23hKKS8HGOd+DM6PWSozzCSpbQGerNX
H61bS7lvESLONhHIJdmo5/d4aGEGlt5xs2KzZe/pwl8OU4/WRYK8MgEKOhvAZT7T
Ups0IDSAOJ5pqzXCLESKFfImNIzak16+lnY9iOMcIFWQVEphMvjkn9jtCu4wvDRe
500GC8i9Q8X3B/D5Y9TB78mDuiqfQP69zBRfhSjgQeU9+eWCxA==
=JIT5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc: features, cleanups, fixes
Part of ACPI ERST support
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 06 Feb 2022 09:36:24 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (24 commits)
util/oslib-posix: Fix missing unlock in the error path of os_mem_prealloc()
ACPI ERST: step 6 of bios-tables-test.c
ACPI ERST: bios-tables-test testcase
ACPI ERST: qtest for ERST
ACPI ERST: create ACPI ERST table for pc/x86 machines
ACPI ERST: build the ACPI ERST table
ACPI ERST: support for ACPI ERST feature
ACPI ERST: header file for ERST
ACPI ERST: PCI device_id for ERST
ACPI ERST: bios-tables-test.c steps 1 and 2
libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb
libvhost-user: handle removal of identical regions
libvhost-user: prevent over-running max RAM slots
libvhost-user: fix VHOST_USER_REM_MEM_REG not closing the fd
libvhost-user: Simplify VHOST_USER_REM_MEM_REG
libvhost-user: Add vu_add_mem_reg input validation
libvhost-user: Add vu_rem_mem_reg input validation
tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()
tests: acpi: update expected blobs
acpi: fix OEM ID/OEM Table ID padding
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're missing an unlock in case installing the signal handler failed.
Fortunately, we barely see this error in real life.
Fixes: a960d6642d ("util/oslib-posix: Support concurrent os_mem_prealloc() invocation")
Fixes: CID 1468941
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta@ionos.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111120830.119912-1-david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change exposes ACPI ERST support for x86 guests.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-8-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This builds the ACPI ERST table to inform OSPM how to communicate
with the acpi-erst device.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-7-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements a PCI device for ACPI ERST. This implements the
non-NVRAM "mode" of operation for ERST as it is supported by
Linux and Windows.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-6-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change introduces the public defintions for ACPI ERST.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-5-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change reserves the PCI device_id for the new ACPI ERST
device.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-4-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For fd-based shared memory, MAP_NORESERVE is only effective for hugetlb,
otherwise it's ignored. Older Linux versions that didn't support
reservation of huge pages ignored MAP_NORESERVE completely.
The first client to mmap a hugetlb fd without MAP_NORESERVE will
trigger reservation of huge pages for the whole mmapped range. There are
two cases to consider:
1) QEMU mapped RAM without MAP_NORESERVE
We're not dealing with a sparse mapping, huge pages for the whole range
have already been reserved by QEMU. An additional mmap() without
MAP_NORESERVE won't have any effect on the reservation.
2) QEMU mapped RAM with MAP_NORESERVE
We're delaing with a sparse mapping, no huge pages should be reserved.
Further mappings without MAP_NORESERVE should be avoided.
For 1), it doesn't matter if we set MAP_NORESERVE or not, so we can
simply set it. For 2), we'd be overriding QEMUs decision and trigger
reservation of huge pages, which might just fail if there are not
sufficient huge pages around. We must map with MAP_NORESERVE.
This change is required to support virtio-mem with hugetlb: a
virtio-mem device mapped into the guest physical memory corresponds to
a sparse memory mapping and QEMU maps this memory with MAP_NORESERVE.
Whenever memory in that sparse region will be accessed by the VM, QEMU
populates huge pages for the affected range by preallocating memory
and handling any preallocation errors gracefully.
So let's map shared RAM with MAP_NORESERVE. As libvhost-user only
supports Linux, there shouldn't be anything to take care of in regard of
other OS support.
Without this change, libvhost-user will fail mapping the region if there
are currently not enough huge pages to perform the reservation:
fv_panic: libvhost-user: region mmap error: Cannot allocate memory
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111123939.132659-1-david@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Today if QEMU (or any other VMM) has sent multiple copies of the same
region to a libvhost-user based backend and then attempts to remove the
region, only one instance of the region will be removed, leaving stale
copies of the region in dev->regions[].
This change resolves this by having vu_rem_mem_reg() iterate through all
regions in dev->regions[] and delete all matching regions.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-7-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
When VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS support was added to
libvhost-user, no guardrails were added to protect against QEMU
attempting to hot-add too many RAM slots to a VM with a libvhost-user
based backed attached.
This change adds the missing error handling by introducing a check on
the number of RAM slots the device has available before proceeding to
process the VHOST_USER_ADD_MEM_REG message.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-6-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We end up not closing the file descriptor, resulting in leaking one
file descriptor for each VHOST_USER_REM_MEM_REG message.
Fixes: 875b9fd97b ("Support individual region unmap in libvhost-user")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-5-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's avoid having to manually copy all elements. Copy only the ones
necessary to close the hole and perform the operation in-place without
a second array.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-4-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Today if multiple FDs are sent from the VMM to the backend in a
VHOST_USER_ADD_MEM_REG message, one FD will be mapped and the remaining
FDs will be leaked. Therefore if multiple FDs are sent we report an
error and fail the operation, closing all FDs in the message.
Likewise in case the VMM sends a message with a size less than that
of a memory region descriptor, we add a check to gracefully report an
error and fail the operation rather than crashing.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-3-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Today if multiple FDs are sent from the VMM to the backend in a
VHOST_USER_REM_MEM_REG message, one FD will be unmapped and the remaining
FDs will be leaked. Therefore if multiple FDs are sent we report an
error and fail the operation, closing all FDs in the message.
Likewise in case the VMM sends a message with a size less than that of a
memory region descriptor, we add a check to gracefully report an error
and fail the operation rather than crashing.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220117041050.19718-2-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.
Update testcase to make sure that it's testing shorter IDs like it
used to before [2].
1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit [2] broke original '\0' padding of OEM ID and OEM Table ID
fields in headers of ACPI tables. While it doesn't have impact on
default values since QEMU uses 6 and 8 characters long values
respectively, it broke usecase where IDs are provided on QEMU CLI.
It shouldn't affect guest (but may cause licensing verification
issues in guest OS).
One of the broken usecases is user supplied SLIC table with IDs
shorter than max possible length, where [2] mangles IDs with extra
spaces in RSDT and FADT tables whereas guest OS expects those to
mirror the respective values of the used SLIC table.
Fix it by replacing whitespace padding with '\0' padding in
accordance with [1] and expectations of guest OS
1) ACPI spec, v2.0b
17.2 AML Grammar Definition
...
//OEM ID of up to 6 characters. If the OEM ID is
//shorter than 6 characters, it can be terminated
//with a NULL character.
2)
Fixes: 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/707
Reported-by: Dmitry V. Orekhov <dima.orekhov@gmail.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20220112130332.1648664-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Tested-by: Dmitry V. Orekhov dima.orekhov@gmail.com
The next commit will revert OEM fields whitespace padding to
padding with '\0' as it was before [1]. That will change OEM
Table ID for:
* SSDT.*: where it was padded from 6 characters to 8
* FACP.slic: where it was padded from 2 characters to 8
after reverting whitespace padding, it will be replaced with
'\0' which effectively will shorten OEM table ID to 6 and 2
characters.
Whitelist affected tables before introducing the change.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields padding with whitespace to
padding with '\0' as it was before [1]. As result test_oem_fields() will
fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables.
Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test
puts on QEMU CLI and expected values match.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
__get_cpuid_max returns an unsigned value.
For consistency, store the result in an unsigned variable.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Peter: I expect this to address the iotest 040,041 failures you observed
on NetBSD. If it doesn't, let me know.
-----BEGIN PGP SIGNATURE-----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=Y89B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging
Python patches
Peter: I expect this to address the iotest 040,041 failures you observed
on NetBSD. If it doesn't, let me know.
# gpg: Signature made Thu 03 Feb 2022 01:59:32 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jsnow-gitlab/tags/python-pull-request:
python/aqmp: add socket bind step to legacy.py
python: upgrade mypy to 0.780
python/machine: raise VMLaunchFailure exception from launch()
python/aqmp: Fix negotiation with pre-"oob" QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The synchronous QMP library would bind to the server address during
__init__(). The new library delays this to the accept() call, because
binding occurs inside of the call to start_[unix_]server(), which is an
async method -- so it cannot happen during __init__ anymore.
Python 3.7+ adds the ability to create the server (and thus the bind()
call) and begin the active listening in separate steps, but we don't
have that functionality in 3.6, our current minimum.
Therefore ... Add a temporary workaround that allows the synchronous
version of the client to bind the socket in advance, guaranteeing that
there will be a UNIX socket in the filesystem ready for the QEMU client
to connect to without a race condition.
(Yes, it's a bit ugly. Fixing it more nicely will have to wait until our
minimum Python version is 3.7+.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We need a slightly newer version of mypy in order to use some features
of the asyncio server functions in the next commit.
(Note: pipenv is not really suited to upgrading individual packages; I
need to replace this tool with something better for the task. For now,
the miscellaneous updates not related to the mypy upgrade are simply
beyond my control. It's on my list to take care of soon.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This allows us to pack in some extra information about the failure,
which guarantees that if the caller did not *intentionally* cause a
failure (by capturing this Exception), some pretty good clues will be
printed at the bottom of the traceback information.
This will help make failures in the event of a non-negative return code
more obvious when they go unhandled; the current behavior in
_post_shutdown() is to print a warning message only in the event of
signal-based terminations (for negative return codes).
(Note: In Python, catching BaseException instead of Exception catches a
broader array of Exception events, including SystemExit and
KeyboardInterrupt. We do not want to "wrap" such exceptions as a
VMLaunchFailure, because that will 'downgrade' the exception from a
BaseException to a regular Exception. We do, however, want to perform
cleanup in either case, so catch on the broadest scope and
wrap-and-re-raise only in the more targeted scope.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QEMU versions prior to the "oob" capability *also* can't accept the
"enable" keyword argument at all. Fix the handshake process with older
QEMU versions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The draw_line() function left artefacts on the screen because it was using the
x/y variables which were incremented in the loop before. Fix it by using the
unmodified x1/x2 variables instead.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
This patch fix the behaviour and positioning of the X11 mouse cursor in HP-UX.
The current code missed to subtract the offset of the CURSOR_CTRL register from
the current mouse cursor position. The HP-UX graphics driver stores in this
register the offset of the mouse graphics compared to the current cursor
position. Without this adjustment the mouse behaves strange at the screen
borders.
Additionally, depending on the HP-UX version, the mouse cursor position
in the cursor_pos register reports different values. To accommodate this
track the current min and max reported values and auto-adjust at runtime.
With this fix the mouse now behaves as expected on HP-UX 10 and 11.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
When writing this code it was assumed that register 0x118000 is the
buffer access mode for color map accesses. It turned out that this
is wrong. Instead register 0x118000 sets both src and dst buffer
access mode at the same time.
This required a larger rewrite of the code. The good thing is that
both the linear framebuffer and the register based vram access can
now be combined into one function.
This makes the linux 'stifb' framebuffer work, and both HP-UX 10.20
and HP-UX 11.11 are still working.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or
a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is
sent to the processor. This can be used for diagnostic purposes like obtaining
a stack trace/register dump or to enter KDB/KGDB in Linux.
This patch adds support for such an emulated TOC button.
It wires up the qemu monitor "nmi" command to trigger a TOC. For that it
provides the hppa_nmi function which is assigned to the nmi_monitor_handler
function pointer. When called it raises the EXCP_TOC hardware interrupt in the
hppa_cpu_do_interrupt() function. The interrupt function then calls the
architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address
0xf0000000).
According to the PA-RISC PDC specification, the SeaBIOS firmware then writes
the CPU registers into PIM (processor internal memmory) for later analysis. In
order to write all registers it needs to know the contents of the CPU "shadow
registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are
provided by qemu in shadow registers when entering the SeaBIOS TOC function.
This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which
restores the original values of the shadow registers. With this opcode SeaBIOS
can store those registers as well into PIM before calling an OS-provided TOC
handler.
To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the
command "nmi". After the TOC started the OS-debugger, exit the qemu monitor
with Ctrl-A C.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This brings the hppa_hardware.h file in sync with the copy in the
SeaBIOS-hppa sources.
In order to support up to 16 CPUs, it's required to move the HPA for
MEMORY_HPA out of the address space of the new 16th CPU.
The new address of 0xfffff000 worked well for Linux and HP-UX, while
other addresses close to the former 0xfffbf000 area are used by the
architecture for local and global broadcasts.
The PIM_STORAGE_SIZE constant is used in SeaBIOS sources and
is relevant for the TOC/NMI feature.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
New firmware features and fixes:
* Allow up to 16 CPUs
* Add TOC button support:
To trigger a TOC, execute "nmi" in the qemu monitor (Ctrl-A C)
* New opt/hostid fw_cfg option to change hostid:
-fw_cfg opt/hostid,string=334455
* Add opt/console fw_cfg option to select default console:
-fw_cfg opt/console,string=serial
-fw_cfg opt/console,string=graphics
* Add Linux TER16x32 font to STI firmware:
-fw_cfg opt/font,string=2
* Leave IRQs disabled after rendevouz
Signed-off-by: Helge Deller <deller@gmx.de>
The capsicum signal stuff is new with FreeBSD 14, rev 1400026, so only
define QEMU_SI_CAPSICUM there. Only copy _capsicum when QEMU_SI_CAPSICUM
is defined. Default to no info being passed for signals we make no guess
about.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration block node permissions
- iotests fixes (051 and mirror-ready-cancel-error)
- Remove an outdated comment
-----BEGIN PGP SIGNATURE-----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=7vd8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-02-01' into staging
Block patches:
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration block node permissions
- iotests fixes (051 and mirror-ready-cancel-error)
- Remove an outdated comment
# gpg: Signature made Tue 01 Feb 2022 13:34:54 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz-gitlab/tags/pull-block-2022-02-01: (24 commits)
block.h: remove outdated comment
iotests/migration-permissions: New test
block-backend: Retain permissions after migration
iotests: declare lack of support for compresion_type in IMGOPTS
iotest 214: explicit compression type
iotests 60: more accurate set dirty bit in qcow2 header
iotests: bash tests: filter compression type
iotest 39: use _qcow2_dump_header
iotests: massive use _qcow2_dump_header
iotests/common.rc: introduce _qcow2_dump_header helper
qcow2: simple case support for downgrading of qcow2 images with zstd
iotest 302: use img_info_log() helper
iotests.py: filter compression type out
iotests.py: filter out successful output of qemu-img create
iotest 065: explicit compression type
iotest 303: explicit compression type
iotests.py: rewrite default luks support in qemu_img
iotests: drop qemu_img_verbose() helper
iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'
iotests: specify some unsupported_imgopts for python iotests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
librbd had a bug until early 2022 that affected all versions of ceph that
supported fast-diff. This bug results in reporting of incorrect offsets
if the offset parameter to rbd_diff_iterate2 is not object aligned.
This patch works around this bug for pre Quincy versions of librbd.
Fixes: 0347a8fd4c
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20220113144426.4036493-3-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the assumption that we can't hit a hole if we do not diff against a snapshot was wrong.
We can see a hole in an image if we diff against base if there exists an older snapshot
of the image and we have discarded blocks in the image where the snapshot has data.
Fix this by simply handling a hole like an unallocated area. There are no callbacks
for unallocated areas so just bail out if we hit a hole.
Fixes: 0347a8fd4c
Suggested-by: Ilya Dryomov <idryomov@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20220113144426.4036493-2-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
