-audio is used like "-audio pa,model=sb16". It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device. The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.
In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend. For now,
keep it simple.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Xen hypervisor is only available on x86 and arm - thus let's
limit the related options to these targets.
Message-Id: <20220427133156.344418-1-thuth@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no need to present the user with -enable-kvm if there
is no support for KVM on the corresponding target.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220427134906.348118-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like -set and -readconfig, it would not really be too hard to
extend -writeconfig to parsing mechanisms other than QemuOpts.
However, the uses of -writeconfig are substantially more
limited, as it is generally easier to write the configuration
by hand in the first place. In addition, -writeconfig does
not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping.
Just remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414145721.326866-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On Mac OS X the Option key maps to Alt and Command to Super/Meta. This change
swaps them around so that Alt is the key closer to the space bar and Meta/Super
is between Control and Alt, like on non-Mac keyboards.
It is a cocoa display option, disabled by default.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Message-Id: <20210713213200.2547-3-gustavo@noronha.dev.br>
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220306121119.45631-3-akihiko.odaki@gmail.com>
Reviewed-by: Will Cohen <wwcohen@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Applications such as Gnome may use Alt-Tab and Super-Tab for different
purposes, some use Ctrl-arrows so we want to allow qemu to handle
everything when it captures the mouse/keyboard.
However, Mac OS handles some combos like Command-Tab and Ctrl-arrows
at an earlier part of the event handling chain, not letting qemu see it.
We add a global Event Tap that allows qemu to see all events when the
mouse is grabbed. Note that this requires additional permissions.
See:
https://developer.apple.com/documentation/coregraphics/1454426-cgeventtapcreate?language=objc#discussionhttps://support.apple.com/en-in/guide/mac-help/mh32356/mac
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Message-Id: <20210713213200.2547-2-gustavo@noronha.dev.br>
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220306121119.45631-2-akihiko.odaki@gmail.com>
Reviewed-by: Will Cohen <wwcohen@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When switching between guest and host on a Mac using command-tab the
command key is sent to the guest which can trigger functionality in the
guest OS. Specifying left-command-key=off disables forwarding this key
to the guest. Defaults to enabled.
Also updated the cocoa display documentation to reference the new
left-command-key option along with the existing show-cursor option.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
[PMD: Set QAPI structure @since tag to 7.0]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This parameter is to be used in the processor_id entry in the type 4
table.
This parameter is set as optional and if left will use the values from
the CPU model.
This enables hiding the host information from the guest and allowing AMD
VMs to run pretending to be Intel for some userspace software concerns.
Reviewed-by: Peter Foley <pefoley@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220125163118.1011809-1-venture@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu-options.hx contains grammar that a native English-speaking
person would never use.
Replace "This option defines where is connected the drive" by
"This option defines where the drive is connected".
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/853
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220202143422.912070-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ARM64 machines like Kunpeng Family Server Chips have a level
of hardware topology in which a group of CPU cores share L3
cache tag or L2 cache. For example, Kunpeng 920 typically
has 6 or 8 clusters in each NUMA node (also represent range
of CPU die), and each cluster has 4 CPU cores. All clusters
share L3 cache data, but CPU cores in each cluster share a
local L3 tag.
Running a guest kernel with Cluster-Aware Scheduling on the
Hosts which have physical clusters, if we can design a vCPU
topology with cluster level for guest kernel and then have
a dedicated vCPU pinning, the guest will gain scheduling
performance improvement from cache affinity of CPU cluster.
So let's enable the support for this new parameter on ARM
virt machines. After this patch, we can define a 4-level
CPU hierarchy like: cpus=*,maxcpus=*,sockets=*,clusters=*,
cores=*,threads=*.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-2-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This option was just a wrapper around the -display ...,window-close=off
parameter, and the name "no-quit" is rather confusing compared to
"window-close" (since there are still other means to quit the emulator),
so let's remove this now.
Message-Id: <20211215082417.180735-1-thuth@redhat.com>
Acked-by: Michal Prívozník <mprivozn@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The new Cluster-Aware Scheduling support has landed in Linux 5.16,
which has been proved to benefit the scheduling performance (e.g.
load balance and wake_affine strategy) on both x86_64 and AArch64.
So now in Linux 5.16 we have four-level arch-neutral CPU topology
definition like below and a new scheduler level for clusters.
struct cpu_topology {
int thread_id;
int core_id;
int cluster_id;
int package_id;
int llc_id;
cpumask_t thread_sibling;
cpumask_t core_sibling;
cpumask_t cluster_sibling;
cpumask_t llc_sibling;
}
A cluster generally means a group of CPU cores which share L2 cache
or other mid-level resources, and it is the shared resources that
is used to improve scheduler's behavior. From the point of view of
the size range, it's between CPU die and CPU core. For example, on
some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node,
and 4 CPU cores in each cluster. The 4 CPU cores share a separate
L2 cache and a L3 cache tag, which brings cache affinity advantage.
In virtualization, on the Hosts which have pClusters (physical
clusters), if we can design a vCPU topology with cluster level for
guest kernel and have a dedicated vCPU pinning. A Cluster-Aware
Guest kernel can also make use of the cache affinity of CPU clusters
to gain similar scheduling performance.
This patch adds infrastructure for CPU cluster level topology
configuration and parsing, so that the user can specify cluster
parameter if their machines support it.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Added '(since 7.0)' to @clusters in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We have a description in qemu-options.hx for each CPU topology
parameter to explain what it exactly means, and also an extra
declaration for the target-specific one, e.g. "for PC only"
when describing "dies", and "for PC, it's on one die" when
describing "cores".
Now we are going to introduce one more non-generic parameter
"clusters", it will make the Doc less readable and if we still
continue to use the legacy way to describe it.
So let's at first make two tweaks of the Docs to improve the
readability and also scalability:
1) In the -help text: Delete the extra specific declaration and
describe each topology parameter level by level. Then add a
note to declare that different machines may support different
subsets and the actual meaning of the supported parameters
will vary accordingly.
2) In the rST text: List all the sub-hierarchies currently
supported in QEMU, and correspondingly give an example of
-smp configuration for each of them.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-2-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to use direct connections instead of via the bus. Clients
are accepted with QMP add_client.
This allows to provide the D-Bus display without a bus. It also
simplifies the testing setup (some CI have issues to setup a D-Bus bus
in a container).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The "dbus" display backend exports the QEMU consoles and other
UI-related interfaces over D-Bus.
By default, the connection is established on the session bus, but you
can specify a different bus with the "addr" option.
The backend takes the "org.qemu" service name, while still allowing
further instances to queue on the same name (so you can lookup all the
available instances too). It accepts any number of clients at this
point, although this is expected to evolve with options to restrict
clients, or only accept p2p via fd passing.
The interface is intentionally very close to the internal QEMU API,
and can be introspected or interacted with busctl/dfeet etc:
$ ./qemu-system-x86_64 -name MyVM -display dbus
$ busctl --user introspect org.qemu /org/qemu/Display1/Console_0
org.qemu.Display1.Console interface - - -
.RegisterListener method h - -
.SetUIInfo method qqiiuu - -
.DeviceAddress property s "pci/0000/01.0" emits-change
.Head property u 0 emits-change
.Height property u 480 emits-change
.Label property s "VGA" emits-change
.Type property s "Graphic" emits-change
.Width property u 640 emits-change
[...]
See the interfaces XML source file and Sphinx docs for the generated API
documentations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The basic SGX did not enable numa for SGX EPC sections, which
result in all EPC sections located in numa node 0. This patch
enable SGX numa function in the guest and the EPC section can
work with RAM as one numa node.
The Guest kernel related log:
[ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff]
[ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff]
The SRAT table can normally show SGX EPC sections menory info in different
numa nodes.
The SGX EPC numa related command:
......
-m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-cpu host,+sgx-provisionkey \
-object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \
-object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \
-numa node,nodeid=0,cpus=0-1,memdev=node0 \
-object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \
-object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \
-numa node,nodeid=1,cpus=2-3,memdev=node1 \
-M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \
......
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new boolean 'kernel-hashes' option on the sev-guest object.
It will be used to to decide whether to add the hashes of
kernel/initrd/cmdline to SEV guest memory when booting with -kernel.
The default value is 'off'.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The single backtick markup in ReST is the "default role". Currently,
Sphinx's default role is called "content". Sphinx suggests you can use
the "Any" role instead to turn any single-backtick enclosed item into a
cross-reference.
This is useful for things like autodoc for Python docstrings, where it's
often nicer to reference other types with `foo` instead of the more
laborious :py:meth:`foo`. It's also useful in multi-domain cases to
easily reference definitions from other Sphinx domains, such as
referencing C code definitions from outside of kerneldoc comments.
Before we do that, though, we'll need to turn all existing usages of the
"content" role to inline verbatim markup wherever it does not correctly
resolve into a cross-refernece by using double backticks instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211004215238.1523082-2-jsnow@redhat.com>
New option parameters unstable-input and unstable-output set policy
for unstable interfaces just like deprecated-input and
deprecated-output set policy for deprecated interfaces (see commit
6dd75472d5 "qemu-options: New -compat to set policy for deprecated
interfaces"). This is intended for testing users of the management
interfaces. It is experimental.
For now, this covers only syntactic aspects of QMP, i.e. stuff tagged
with feature 'unstable'. We may want to extend it to cover semantic
aspects, or the command line.
Note that there is no good way for management application to detect
presence of these new option parameters: they are not visible output
of query-qmp-schema or query-command-line-options. Tolerable, because
it's meant for testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc comments fixed up]
There is one numa config example in qemu-options.hx currently
using "-smp 2" and assuming that there will be 2 sockets and
2 cpus totally. However now the actual calculation logic of
missing sockets and cores is not immutable and is considered
liable to change. Although we will get maxcpus=2 finally based
on current parser, it's always stable to specify it explicitly.
So "-smp 2,sockets=2,maxcpus=2" will be optimal when we expect
multiple sockets and 2 cpus totally.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210928121134.21064-3-wangyanan55@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In qemu-option.hx, there is "-smp [[cpus=]n][,maxcpus=cpus]..." in the
DEF part, and "-smp [[cpus=]n][,maxcpus=maxcpus]..." in the RST part.
Obviously the later is right, let's fix the previous one.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210928121134.21064-2-wangyanan55@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In the real SMP hardware topology world, it's much more likely that
we have high cores-per-socket counts and few sockets totally. While
the current preference of sockets over cores in smp parsing results
in a virtual cpu topology with low cores-per-sockets counts and a
large number of sockets, which is just contrary to the real world.
Given that it is better to make the virtual cpu topology be more
reflective of the real world and also for the sake of compatibility,
we start to prefer cores over sockets over threads in smp parsing
since machine type 6.2 for different arches.
In this patch, a boolean "smp_prefer_sockets" is added, and we only
enable the old preference on older machines and enable the new one
since type 6.2 for all arches by using the machine compat mechanism.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we directly calculate the omitted cpus based on the given
incomplete collection of parameters. This makes some cmdlines like:
-smp maxcpus=16
-smp sockets=2,maxcpus=16
-smp sockets=2,dies=2,maxcpus=16
-smp sockets=2,cores=4,maxcpus=16
not work. We should probably set the value of cpus to match maxcpus
if it's omitted, which will make above configs start to work.
So the calculation logic of cpus/maxcpus after this patch will be:
When both maxcpus and cpus are omitted, maxcpus will be calculated
from the given parameters and cpus will be set equal to maxcpus.
When only one of maxcpus and cpus is given then the omitted one
will be set to its counterpart's value. Both maxcpus and cpus may
be specified, but maxcpus must be equal to or greater than cpus.
Note: change in this patch won't affect any existing working cmdlines
but allows more incomplete configs to be valid.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SMP configuration, we should either provide a topology
parameter with a reasonable value (greater than zero) or just
omit it and QEMU will compute the missing value.
The users shouldn't provide a configuration with any parameter
of it specified as zero (e.g. -smp 8,sockets=0) which could
possibly cause unexpected results in the -smp parsing. So we
deprecate this kind of configurations since 6.2 by adding the
explicit sanity check.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-3-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because SGX EPC is enumerated through CPUID, EPC "devices" need to be
realized prior to realizing the vCPUs themselves, i.e. long before
generic devices are parsed and realized. From a virtualization
perspective, the CPUID aspect also means that EPC sections cannot be
hotplugged without paravirtualizing the guest kernel (hardware does
not support hotplugging as EPC sections must be locked down during
pre-boot to provide EPC's security properties).
So even though EPC sections could be realized through the generic
-devices command, they need to be created much earlier for them to
actually be usable by the guest. Place all EPC sections in a
contiguous block, somewhat arbitrarily starting after RAM above 4g.
Ensuring EPC is in a contiguous region simplifies calculations, e.g.
device memory base, PCI hole, etc..., allows dynamic calculation of the
total EPC size, e.g. exposing EPC to guests does not require -maxmem,
and last but not least allows all of EPC to be enumerated in a single
ACPI entry, which is expected by some kernels, e.g. Windows 7 and 8.
The new compound properties command for sgx like below:
......
-object memory-backend-epc,id=mem1,size=28M,prealloc=on \
-object memory-backend-epc,id=mem2,size=10M \
-M sgx-epc.0.memdev=mem1,sgx-epc.1.memdev=mem2
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The alt_grab and ctrl_grab parameter of the -display sdl option prevent
the QAPIfication of the "sdl" part of the -display option, so we should
eventually remove them. And since this feature is also rather niche anyway,
we should not clutter the top-level option list with these, so let's
also deprecate the "-alt-grab" and the "-ctrl-grab" options while we're
at it.
Once the deprecation period of "alt_grab" and "ctrl_grab" is over, we
then can finally switch the -display sdl option to use QAPI internally,
too.
Message-Id: <20210825092023.81396-3-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The -display sdl option is not using QAPI internally yet, and uses hand-
crafted parsing instead (see parse_display() in vl.c), which is quite
ugly, since most of the other code is using the QAPIfied DisplayOption
already. Unfortunately, the "alt_grab" and "ctrl_grab" use underscores in
their names which has recently been forbidden in new QAPI code, so
a straight conversion is not possible. While we could add some exceptions
to the QAPI schema parser for this, the way these parameters have been
designed was maybe a bad idea anyway: First, it's not possible to enable
both parameters at the same time, thus instead of two boolean parameters
it would be better to have only one multi-choice parameter instead.
Second, the naming is also somewhat unfortunate since the "alt_grab"
parameter is not about the ALT key, but rather about the left SHIFT key
that has to be used additionally when the parameter is enabled.
So instead of trying to QAPIfy "alt_grab" and "ctrl_grab", let's rather
introduce an alternative to these parameters instead, a new parameter
called "grab-mod" which can either be set to "lshift-lctrl-lalt" or to
"rctrl". In case we ever want to support additional modes later, we can
then also simply extend the list of supported strings here.
Message-Id: <20210825092023.81396-2-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Passing arguments to plugins had to be done through "arg=<argname>".
This is redundant and introduces confusion especially when the argument
has a name and value (e.g. `-plugin plugin_name,arg="argname=argvalue"`).
This allows passing plugin arguments directly e.g:
`-plugin plugin_name,argname=argvalue`
For now, passing arguments through "arg=" is still supports but outputs
a deprecation warning.
Also, this commit makes boolean arguments passed to plugins in the
`argname=on|off` form instead of the deprecated short-boolean form.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-2-ma.mandourr@gmail.com>
The documentation of the -machine memory-backend has some minor
formatting errors:
* Misindentation of the initial line meant that the whole option
section is incorrectly indented in the HTML output compared to
the other -machine options
* The examples weren't indented, which meant that they were formatted
as plain run-on text including outputting the "::" as text.
* The a) b) list has no rst-format markup so it is rendered as
a single run-on paragraph
Fix the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210719105257.3599-1-peter.maydell@linaro.org
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The parameters of intel-iommu device are non-trivial to understand. Add an
entry for it so that people can reference to it when using.
There're actually a few more options there, but I hide them explicitly because
they shouldn't be used by normal QEMU users.
Cc: Chao Yang <chayang@redhat.com>
Cc: Lei Yang <leiyang@redhat.com>
Cc: Jing Zhao <jinzhao@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210707154114.197580-1-peterx@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -smp option help is peculiarly specific about mentioning the CPU
upper limits, but these are wrong. The "PC" target has varying max
CPU counts depending on the machine type picked. Notes about guest
OS limits are inappropriate for QEMU docs. There are way too many
machine types for it to be practical to mention actual limits, and
some limits are even modified by downstream distribtions. Thus it
is better to remove the specific limits entirely.
The CPU topology reporting is also not neccessarily specific to the
PC platform and descriptions around the rules of usage are somewhat
terse. Expand this information with some examples to show effects
of defaulting.
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The initial CPU count number is not required, if any of the topology
options are given, since it can be computed.
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The list of CPU topology options are presented in a fairly arbitrary
order currently. Re-arrange them so that they're ordered from largest to
smallest unit
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sdl and gtk display options support more parameters than currently
documented. Also the "vnc" option got lost during a recent commit,
add it again.
Fixes: ddc717581c ("Add display suboptions to man pages")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's just a wrapper around the -display ...,window-close=off parameter,
and the name "no-quit" is rather confusing compared to "window-close"
(since there are still other means to quit the emulator), so we should
rather tell our users to use the "window-close" parameter instead.
While we're at it, update the documentation to state that
"-no-quit" is available for GTK, too, not only for SDL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the QAPI schema, there is a "-" and not a "_" between
"window" and "close", and we're also talking about "window-close"
in the long parameter description in qemu-options.hx, so we should
make sure that we rather use the variant with the "-" by default
instead of only allowing the one with the "_" here. The old way
still stays enabled for compatibility, but we deprecate it, so that
we can switch to a QAPIfied parameter one day more easily.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mode=control argument configures a QMP monitor.
Signed-off-by: Ali Shirvani <alishir@routerhosting.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <0799f0de89ad2482672b5d61d0de61e6eba782da.1621407918.git.alishir@routerhosting.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These headers are also included from softmmu/vl.c, so they should be
in include/. Remove qemu-options-wrapper.h, since elsewhere
we include "template" headers directly and #define the parameters in
the including file; move qemu-options.h to include/.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a parameter for dirty gfn count for dirty rings. If zero, dirty ring is
disabled. Otherwise dirty ring will be enabled with the per-vcpu gfn count as
specified. If dirty ring cannot be enabled due to unsupported kernel or
illegal parameter, it'll fallback to dirty logging.
By default, dirty ring is not enabled (dirty-gfn-count default to 0).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-9-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
'id' of memory-backend-{file,ram} is not only for '-numa''s reference, but
also other parameters like '-device nvdimm'.
More clearly call out this to avoid misinterpretation.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1619080922-83527-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Policy "crash" calls abort() when deprecated input is received.
Bugs in integration tests may mask the error from policy "reject".
Provide a larger hammer: crash outright. Masking that seems unlikely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-12-armbru@redhat.com>
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
This is only semantically useful for QMP.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the new "password-secret" option, there is no reason to use the old
inecure "password" option with -spice, so it can be deprecated.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-4-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using SPICE the "password" option provides the password
in plain text on the command line. This is insecure as it is visible
to all processes on the host. As an alternative, the password can be
provided separately via the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--spice port=5901,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-3-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using VNC the "password" flag turns on password based
authentication. The actual password has to be provided separately via
the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--vnc localhost:0,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-2-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are some more -usbdevice options that have never been mentioned
in the documentation. Now that we removed -usbdevice from the list
of deprecated features again, we should document them properly.
While we're at it, also sort them alphabetically.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210310173323.1422754-5-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.
[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303184644.1639691-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "delay" option was introduced as a way to enable Nagle's algorithm
with ",nodelay". Since the short form for boolean options has now been
deprecated, introduce a more properly named "nodelay" option. The "delay"
option remains as an undocumented option.
"delay" and "nodelay" are mutually exclusive. Because the check is
done at consumption time, the code also rejects them if one of the
two is specified via -set.
Based-on: <20210226080526.651705-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The functionality of -writeconfig is limited and the code
does not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping)
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
The on|off syntax has been supported since -vnc switched to use
QemuOpts in commit 4db14629c3
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-7-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-5-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-4-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentation for '-machine memory-backend' CLI option and
how to use it.
And document that x-use-canonical-path-for-ramblock-id,
is considered to be stable to make sure it won't go away by accident.
x- was intended for unstable/iternal properties, and not supposed to
be stable option. However it's too late to rename (drop x-)
it as it would mean that users will have to mantain both
x-use-canonical-path-for-ramblock-id (for QEMU 5.0-5.2) versions
and prefix-less for later versions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210121161504.1007247-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let -object memory-backend-file work on read-only files when the
readonly=on option is given. This can be used to share the contents of a
file between multiple guests while preventing them from consuming
Copy-on-Write memory if guests dirty the pages, for example.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210104171320.575838-3-stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update some docs and test cases to use 'on' | 'off' as the preferred
value for bool options.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The possible choices for panic, reset and watchdog actions are inconsistent.
"-action panic=poweroff" should be renamed to "-action panic=shutdown"
on the command line. This is because "-action panic=poweroff" and
"-action watchdog=poweroff" have slightly different semantics, the first
does an unorderly exit while the second goes through qemu_cleanup(). With
this change, -no-shutdown would not have to change "-action panic=pause"
"pause", just like it does not have to change the reset action.
"-action reboot=none" should be renamed to "-action reboot=reset".
This should be self explanatory, since for example "-action panic=none"
lets the guest proceed without taking any action.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.
Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.
The in.buffer-count option will be used with one of the next
patches.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "XVP" (Xen VNC Proxy) extension defines a mechanism for a VNC client
to issue power control requests to trigger graceful shutdown, reboot, or
hard reset.
This option is not enabled by default, since we cannot assume that users
with VNC access implicitly have administrator access to the guest OS.
Thus is it enabled with a boolean "power-control" option e.g.
-vnc :1,power-control=on
While, QEMU can easily support shutdown and reset, there's no easy way
to wire up reboot support at this time. In theory it could be done by
issuing a shutdown, followed by a reset, but there's no convenient
wiring for such a pairing in QEMU. It also isn't possible to have the
VNC server directly talk to QEMU guest agent, since the agent chardev is
typically owned by an external mgmt app.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[ kraxel: rebase to master ]
[ kraxel: add missing break ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Plumb the value through to alloc_code_gen_buffer. This is not
supported by any os or tcg backend, so for now enabling it will
result in an error.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It has been marked as deprecated since QEMU v5.0, replaced by the
corresponding parameter of the -display option.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '-tb-size' option (replaced by '-accel tcg,tb-size') is
deprecated since 5.0 (commit fe17413247). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201202112714.1223783-1-philmd@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current default action of pausing a guest after a panic event
is received leaves the responsibility to resume guest execution to the
management layer. The reasons for this behavior are discussed here:
https://lore.kernel.org/qemu-devel/52148F88.5000509@redhat.com/
However, in instances like the case of older guests (Linux and
Windows) using a pvpanic device but missing support for the
PVPANIC_CRASHLOADED event, and Windows guests using the hv-crash
enlightenment, it is desirable to allow the guests to continue
running after sending a PVPANIC_PANICKED event. This allows such
guests to proceed to capture a crash dump and automatically reboot
without intervention of a management layer.
Add an option to avoid stopping a VM after a panic event is received,
by passing:
-action panic=none
in the command line arguments, or during runtime by using an upcoming
QMP command.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-3-git-send-email-alejandro.j.jimenez@oracle.com>
[Do not fix panic action in the variable, instead modify -no-shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several command line options currently in use are meant to modify
the behavior of QEMU in response to certain guest events like:
-no-reboot, -no-shutdown, -watchdog-action.
These can be grouped into a single option of the form:
-action event=action
Which can be used to specify the existing options above in the
following format:
-action reboot=none|shutdown
-action shutdown=poweroff|pause
-action watchdog=reset|shutdown|poweroff|pause|debug|none|inject-nmi
This is done in preparation for adding yet another option of this
type, which modifies the QEMU behavior when a guest panic occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-2-git-send-email-alejandro.j.jimenez@oracle.com>
[Use QemuOpts help support, invoke QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation for the icount documentation has some minor issues:
* in a couple of places it says "sleep=on|off" when in the context of the
sentence it means specifically "sleep=on"
* the synopsis line for the documentation has drifted out of sync
with the synopsis line in the DEF() macro (used for "-help" output)
* the synopsis line in the DEF() macro is missing a "][" between
the sleep= part and the rr= part
* the synopsis line doesn't indicate that rrsnapshot is an optional
part of the rr=mode,rrfile=filename subgrouping
* we don't document that sleep=on can't be used with shift=auto
or align=on
* the rr option description had some minor grammar and formatting
errors and was a bit terse
* in commit f1f4b57e88 in 2015 the documentation of the sleep=
suboption got added between the two paragraphs defining general
behaviour of the icount option. This meant that the second
paragraph talking about the behaviour of "this option" reads as
if it's talking about sleep=on, when it's really describing -icount
as a whole. The paragraph is better moved back up to above the
sleep= section.
* the summary text displayed in "-help" output didn't mention
the record-and-replay part
Fix these errors.
Fixes: https://bugs.launchpad.net/qemu/+bug/1774412
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201121213506.15599-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The man page does not contain all the chapters from the System Emulation
Users Guide, so some of the links that we've put into the qemu options
descriptions can not be resolved and thus the link names are used in the
man pages instead. These link names currently contain weird "_005f" letters
in the middle and just do not make any sense for the users. To avoid this
situation, replace the link names with more descriptive, natural text.
Message-Id: <20201116145341.91606-1-thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3
Buglink: https://bugs.launchpad.net/qemu/+bug/1453608
Signed-off-by: Thomas Huth <thuth@redhat.com>
The option has never been mentioned in our documentation, it's been
deprecated since years, it's marked with QEMU_ARCH_I386 (which does
not make sense anymore since KVM is available on other architectures,
too), it does not do anything by default in upstream QEMU (since TCG
is the default here anyway), and we're spending too much precious time
each year discussing whether it makes sense to keep this option as a
nice suger or not... let's finally put an end on this and remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201020160504.62460-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we added io_uring AIO engine, we forgot to update qemu-options.hx,
so qemu(1) man page and qemu help were outdated.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200924151511.131471-1-sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-4-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing.
Backslash-escapes may be necessary to prevent unintended parsing".
The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
lines on my system. A stand-alone backslash at EOL serves as line
continuation in a "parsed-literal" block. Therefore, escape the
backslashes that we want to appear as such in the formatted documentation.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908172111.19072-1-lersek@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch fixes the netdev document description typo in qemu-option.hx.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200727045925.29375-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Common VM users sometimes care about CPU speed, so we add two new
options to allow VM vendors to present CPU speed to their users.
Normally these information can be fetched from host smbios.
Strictly speaking, the "max speed" and "current speed" in type 4
are not really for the max speed and current speed of processor, for
"max speed" identifies a capability of the system, and "current speed"
identifies the processor's speed at boot (see smbios spec), but some
applications do not tell the differences.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200806035634.376-2-fangying1@huawei.com>
The line was too long, and some of the entries were wrong (fur instead
of fru). Just use the prop=val thing tha other entries use.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This patch allow users to set the "max_queue_size" according
to their environment.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is followup patch to the one submitted back in Oct, 19
https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html
My mistake here, I took my eyes of the mailing list after I got the
initial thumbs up. This patch follows up on Markus comments in the
above link.
Purpose of this patch:
We want to print guest name for errors, warnings and info messages. This
was the first of two patches the second being MCE errors targeting a VM
with guest name prepended. But in a large fleet we see many other
errors that disable a VM or crash it. In a large fleet and centralized
logging having the guest name enables identify of owner and customer.
Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com>
Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- add the tls-cipher-suites object,
- add the ability to QOM objects to produce data consumable
by the fw_cfg device,
- let the tls-cipher-suites object implement the
FW_CFG_DATA_GENERATOR interface.
This is required by EDK2 'HTTPS Boot' feature of OVMF to tell
the guest which TLS ciphers it can use.
CI jobs results:
https://travis-ci.org/github/philmd/qemu/builds/704724619https://gitlab.com/philmd/qemu/-/pipelines/162938106https://cirrus-ci.com/build/4682977303068672
-----BEGIN PGP SIGNATURE-----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=QArU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' into staging
firmware (and crypto) patches
- add the tls-cipher-suites object,
- add the ability to QOM objects to produce data consumable
by the fw_cfg device,
- let the tls-cipher-suites object implement the
FW_CFG_DATA_GENERATOR interface.
This is required by EDK2 'HTTPS Boot' feature of OVMF to tell
the guest which TLS ciphers it can use.
CI jobs results:
https://travis-ci.org/github/philmd/qemu/builds/704724619https://gitlab.com/philmd/qemu/-/pipelines/162938106https://cirrus-ci.com/build/4682977303068672
# gpg: Signature made Sat 04 Jul 2020 17:37:08 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/fw_cfg-20200704:
crypto/tls-cipher-suites: Produce fw_cfg consumable blob
softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespace
softmmu/vl: Let -fw_cfg option take a 'gen_id' argument
hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface
crypto: Add tls-cipher-suites object
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we have 2 types of vhost backends in QEMU: vhost kernel and
vhost-user. The above patch provides a generic device for vDPA purpose,
this vDPA device exposes to user space a non-vendor-specific configuration
interface for setting up a vhost HW accelerator, this patch set introduces
a third vhost backend called vhost-vdpa based on the vDPA interface.
Vhost-vdpa usage:
qemu-system-x86_64 -cpu host -enable-kvm \
......
-netdev type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-id,id=vhost-vdpa0 \
-device virtio-net-pci,netdev=vhost-vdpa0,page-per-vq=on \
Signed-off-by: Lingshan zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-14-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
On the host OS, various aspects of TLS operation are configurable.
In particular it is possible for the sysadmin to control the TLS
cipher/protocol algorithms that applications are permitted to use.
* Any given crypto library has a built-in default priority list
defined by the distro maintainer of the library package (or by
upstream).
* The "crypto-policies" RPM (or equivalent host OS package)
provides a config file such as "/etc/crypto-policies/config",
where the sysadmin can set a high level (library-independent)
policy.
The "update-crypto-policies --set" command (or equivalent) is
used to translate the global policy to individual library
representations, producing files such as
"/etc/crypto-policies/back-ends/*.config". The generated files,
if present, are loaded by the various crypto libraries to
override their own built-in defaults.
For example, the GNUTLS library may read
"/etc/crypto-policies/back-ends/gnutls.config".
* A management application (or the QEMU user) may overide the
system-wide crypto-policies config via their own config, if
they need to diverge from the former.
Thus the priority order is "QEMU user config" > "crypto-policies
system config" > "library built-in config".
Introduce the "tls-cipher-suites" object for exposing the ordered
list of permitted TLS cipher suites from the host side to the
guest firmware, via fw_cfg. The list is represented as an array
of bytes.
The priority at which the host-side policy is retrieved is given
by the "priority" property of the new object type. For example,
"priority=@SYSTEM" may be used to refer to
"/etc/crypto-policies/back-ends/gnutls.config" (given that QEMU
uses GNUTLS).
The firmware uses the IANA_TLS_CIPHER array for configuring
guest-side TLS, for example in UEFI HTTPS Boot.
[Description from Daniel P. Berrangé, edited by Laszlo Ersek.]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200623172726.21040-2-philmd@redhat.com>
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a. Disable legacy option for new machine
types (since 5.1) and amend documentation.
'-numa node,memdev' shall be used instead of disabled option
with new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The docs are ambiguous about the difference (or actually their
equality) between options '-virtfs' vs. '-fsdev'. So clarify that
'-virtfs' is actually just a convenience shortcut for its
generalized form '-fsdev' in conjunction with '-device virtio-9p-pci'.
And as we're at it, also be a bit more descriptive what 9pfs is
actually used for.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <208f1fceffce2feaf7c900b29e326b967dce7762.1585661532.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
The documentation of our -s and -gdb options is quite old; in
particular it still claims that it will cause QEMU to stop and wait
for the gdb connection, when this has not been true for some time:
you also need to pass -S if you want to make QEMU not launch the
guest on startup.
Improve the documentation to mention this requirement in the
executable's --help output, the documentation of the -gdb option in
the manual, and in the "GDB usage" chapter.
Includes some minor tweaks to these paragraphs of documentation
since I was editing them anyway (such as dropping the description
of our gdb support as "primitive").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200403094014.9589-1-peter.maydell@linaro.org
The "expired_scan_cycle" determines period of scanning expired
primary node net packets.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "compare_timeout" determines the maximum time to hold the primary net packet.
This patch expose the "compare_timeout", make user have ability to
adjest the value according to application scenarios.
QMP command demo:
{ "execute": "qom-get",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout" } }
{ "execute": "qom-set",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout",
"value": 5000} }
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.
This commit was created using the following Perl one-liner:
perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit contains hand-written fixes for some issues with the
autogenerated rST fragments in qemu-options.hx:
* Sphinx complains about the UTF-8 art table in the documentation of
the -drive option. Replace it with a proper rST format table.
* rST does not like definition list entries with no actual
definition, but it is possible to work around this by putting a
single escaped literal space as the definition line.
* The "-g widthxheight" option documentation suffers particularly
badly from losing the distinction between italics and fixed-width
as a result of the auto conversion, so put it back in again.
* The script missed some places that use the |qemu_system| etc
macros and need to be marked up as parsed-literal blocks.
* The script autogenerated an expanded out version of the
contents of qemu-option-trace.texi; replace it with an
qemu-option-trace.rst.inc include.
This is sufficient that we can enable inclusion of the
option documentation from invocation.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-28-peter.maydell@linaro.org
Add the rST versions of the documentation fragments to qemu-options.hx.
This is entirely autogenerated using scripts/hxtool-conv.pl.
The result is not quite valid rST in all places; the following
commit will have the manual adjustments needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SPARC and PPC targets currently have a fragment of target-specific
information about the -g and -prom options which would be better placed
as part of the general documentation of those options in qemu-options.hx.
Move the relevant information to those locations.
SPARC also has a bit of text about the -M option which is out of
date and provides no useful information over the generic documentation
of that option, so just delete it.
The motivation here is again to avoid having to awkwardly include
this text into the rST version of the qemu.1 manpage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-25-peter.maydell@linaro.org
Currently the per-target documentation for those targets that
implement semihosting includes a bit of text that goes into both the
manual and the manpage about options specific to the target. This
text is redundant with the earlier generic option description of the
semihosting option produced from qemu-options.hx. To avoid having
to create a lot of stub include files to include into the rST
generated qemu.1 manpage, roll target-specific bits of information
into the qemu-options.hx text, so the user doesn't have to look
in two places for this information.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-24-peter.maydell@linaro.org
Since qemu-doc.texi is mostly including files from docs/system,
move the existing include files there for consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-12-peter.maydell@linaro.org
Message-id: 20200226113034.6741-12-pbonzini@redhat.com
[PMM: update MAINTAINERS line for qemu-option-trace.texi]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The L2TPv3 RFC number is 3931:
https://tools.ietf.org/html/rfc3931
Reported-by: Henrik Johansson <henrikjohansson@rocketmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
To switch the Secondary to Primary, we need to insert new filters
before the filter-rewriter.
Add the options insert= and position= to be able to insert filters
anywhere in the filter list.
position should be "head" or "tail" to insert at the head or
tail of the filter list or it should be "id=<id>" to specify
the id of another filter.
insert should be either "before" or "behind" to specify where to
insert the new filter relative to the one specified with position.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The default NIC model for QEMU varies per machine type, and is liable to
change across machine type versions. Documenting e1000 NIC as the
default for PC/i386 is thus misleading to users at best. In particular
the PC q35 machine type switched to use e1000e, but only in machine
type versions after 2.11.
Rather than try to explain which NIC model is used for each machine
type version, remove mention of e1000 as the default, and steer users
towards always specifying their desired model.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is the only instance of a non-zero constant not using a symbolic
constant.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200204165638.25051-1-jsnow@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The qemu-block-drivers documentation is currently in
docs/qemu-block-drivers.texi in Texinfo format, which we present
to the user as:
* a qemu-block-drivers manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-block-drivers manpage
* part of the system/ Sphinx manual
This follows the same pattern we've done for qemu-ga and qemu-nbd.
We have to drop a cross-reference from the documentation of the
-cdrom option back to the qemu-block-drivers documentation, since
they're no longer within the same texinfo document.
As noted in a comment, the manpage output is slightly compromised
due to limitations in Sphinx. In an ideal world, the HTML output
would have the various headings like 'Disk image file formats'
as top-level section headings (which then appear in the overall
system manual's table-of-contents), and it would not have the
section headings which make sense only for the manpage like
'synopsis', 'description', and 'see also'. Unfortunately, the
mechanism Sphinx provides for restricting pieces of documentation
is limited to the point of being flawed: the 'only::' directive
is implemented as a filter that is applied at a very late stage
in the document processing pipeline, rather than as an early
equivalent of an #ifdef. This means that Sphinx's process of
identifying which section heading markup styles are which levels
of heading gets confused if the 'only::' directive contains
section headings which would affect the heading-level of a
later heading. I have opted to prioritise making the HTML format
look better, with the compromise being that in the manpage
the 'Disk image file formats' &c headings are top-level headings
rather than being sub-headings under the traditional 'Description'
top-level section title.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
We already print availabled devices with "-device help", or available
backends with "-netdev help" or "-chardev help". Let's provide a way
for the users to query the available display backends, too.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200108144702.29969-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add -numa hmat-cache option to provide Memory Side Cache Information.
These memory attributes help to build Memory Side Cache Information
Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
Before using hmat-cache option, enable HMAT with -machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-4-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add -numa hmat-lb option to provide System Locality Latency and
Bandwidth Information. These memory attributes help to build
System Locality Latency and Bandwidth Information Structure(s)
in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using
hmat-lb option, enable HMAT with -machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-3-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT),
The initiator represents processor which access to memory. And in 5.2.27.3
Memory Proximity Domain Attributes Structure, the attached initiator is
defined as where the memory controller responsible for a memory proximity
domain. With attached initiator information, the topology of heterogeneous
memory can be described. Add new machine property 'hmat' to enable all
HMAT specific options.
Extend CLI of "-numa node" option to indicate the initiator numa node-id.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report
the platform's HMAT tables. Before using initiator option, enable HMAT with
-machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-2-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit bbd9e6985f.
In 20a1922032 we allowed reboot-timeout=-1 again, so update the doc
accordingly.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205024821.245435-1-hhan@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-msg parameter "timestamp" defaults to "off" if you don't specify msg,
and to "on" if you do. Messed up right in commit 5e2ac51917 "add
timestamp to error_report()". Mostly harmless, because "timestamp" is
the only parameter, so "if you do" is "-msg ''", which nobody does.
Change the default to "off" no matter what.
While there, rename enable_timestamp_msg to error_with_timestamp, and
polish documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191010081508.8978-1-armbru@redhat.com>
The first machine property to fall is Xen's Intel integrated graphics
passthrough. The "-machine igd-passthru" option does not set anymore
a property on the machine object, but desugars to a GlobalProperty on
accelerator objects.
The setter is very simple, since the value ends up in a
global variable, so this patch also provides an example before the more
complicated cases that follow it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-tb-size fits nicely in the new framework for accelerator-specific options. It
is a very niche option, so insta-deprecate it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.
I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.
Even worse for the emulated device: When running
qemu-system-x86_64 -bt device:keyboard
QEMU crashes once you hit a key.
So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.
Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.
Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add -object iothread documentation to the man page, including references
to the query-iothread QMP command and qom-set syntax for adjusting
adaptive polling parameters at run-time.
Reported-by: Zhenyu Ye <yezhenyu2@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20191025122236.29815-1-stefanha@redhat.com
Message-Id: <20191025122236.29815-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It's been marked as deprecated since QEMU v4.1, time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Improve the help text of the "-display" option:
- Only print the options that we have enabled in the binary
(similar to what we do for other options like -netdev already)
- The "frame=on|off" from "-display sdl" has been removed in commit
09bd7ba9f5 ("Remove deprecated -no-frame option"), so we should
not show this in the help text anymore
- The "-display egl-headless" line was missing a "\n" at the end
- Indent the default display text in a nicer way
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191023120129.13721-1-huth@tuxfamily.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.
It is accessed as a framebuffer but the color palette can be set.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=JZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
coroutine: Add qemu_co_mutex_assert_locked()
doc: Describe missing generic -blockdev options
block/backup: drop dead code from backup_job_create
blockdev: Use error_report() in hmp_commit()
iotests: Skip read-only cases in 118 when run as root
qapi: add support for blkreplay driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We added more generic options after introducing -blockdev and forgot to
update the documentation (man page and --help output) accordingly. Do
that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since ee5d0f89d, -1 is not valid for the value of reboot-timeout. Update
that in qemu-options doc.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191015151451.727323-1-hhan@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will allow us to disable mixeng when we use a decent backend.
Disabling mixeng have a few advantages:
* we no longer convert the audio output from one format to another, when
the underlying audio system would just convert it to a third format.
We no longer convert, only the underlying system, when needed.
* the underlying system probably has better resampling and sample format
converting methods anyway...
* we may support formats that the mixeng currently does not support (S24
or float samples, more than two channels)
* when using an audio server (like pulseaudio) different sound card
outputs will show up as separate streams, even if we use only one
backend
Disadvantages:
* audio capturing no longer works (wavcapture, and vnc audio extension)
* some backends only support a single playback stream or very picky
about the audio format. In this case we can't disable mixeng.
Originally thw two main use cases of the disabled option was: using
unsupported audio formats (5.1 and 7.1 audio) and having different
pulseaudio streams per audio frontend. Since we can have multiple
-audiodevs, the latter is not that important, so currently you only need
this option if you want to use 5.1 or 7.1 audio (implemented in a later
patch), otherwise it's probably better to stick to the old and tried
mixeng, since it's less picky about the backends.
The ideal solution would be to port as much as possible to gstreamer,
but this is currently out of scope:
https://wiki.qemu.org/Internships/ProjectIdeas/AudioGStreamer
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 5765186a7aadd51a72bc7d3e804307f0ee8a34ce.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
'warn' (default): Only log an error message (once) on host if more than one
device is shared by same export, except of that just ignore this config
error though. This is the default behaviour for not breaking existing
installations implying that they really know what they are doing.
'forbid': Like 'warn', but except of just logging an error this
also denies access of guest to additional devices.
'remap': Allows to share more than one device per export by remapping
inodes from host to guest appropriately. To support multiple devices on the
9p share, and avoid qid path collisions we take the device id as input to
generate a unique QID path. The lowest 48 bits of the path will be set
equal to the file inode, and the top bits will be uniquely assigned based
on the top 16 bits of the inode and the device id.
Signed-off-by: Antonios Motakis <antonios.motakis@huawei.com>
[CS: - Rebased to https://github.com/gkurz/qemu/commits/9p-next
(SHA1 7fc4c49e91).
- Added virtfs option 'multidevs', original patch simply did the inode
remapping without being asked.
- Updated hash calls to new xxhash API.
- Updated docs for new option 'multidevs'.
- Fixed v9fs_do_readdir() not having remapped inodes.
- Log error message when running out of prefixes in
qid_path_prefixmap().
- Fixed definition of QPATH_INO_MASK.
- Wrapped qpp_table initialization to dedicated qpp_table_init()
function.
- Dropped unnecessary parantheses in qpp_lookup_func().
- Dropped unnecessary g_malloc0() result checks. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
[groug: - Moved "multidevs" parsing to the local backend.
- Added hint to invalid multidevs option error.
- Turn "remap" into "x-remap". ]
Signed-off-by: Greg Kurz <groug@kaod.org>
