I am leaving Xilinx, so to avoid having an email address that bounces
update my maintainer address to point to my personal email address.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 7bb690382e3370aa1c1e047a84e36603c787ec0e.1519749987.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add myself as an OpenBSD maintainer and add OpenBSD as maintained.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Message-id: 20180216164620.GA53727@humpty.home.comstyle.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-binfmt-conf.sh is used for the Linux usermode emulation, so
let's add this file to that section in the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Split it out from the s390-ccw-virtio machine, add Thomas as a
maintainer in addition to Christian.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All your mainframes are belong to me.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a new protocol driver that exclusively opens a host NVMe
controller through VFIO. It achieves better latency than linux-aio by
completely bypassing host kernel vfs/block layer.
$rw-$bs-$iodepth linux-aio nvme://
----------------------------------------
randread-4k-1 10.5k 21.6k
randread-512k-1 745 1591
randwrite-4k-1 30.7k 37.0k
randwrite-512k-1 1945 1980
(unit: IOPS)
The driver also integrates with the polling mechanism of iothread.
This patch is co-authored by Paolo and me.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180116060901.17413-4-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJadcD7AAoJEHWtZYAqC0IR8eoIAJn4Id/N+DB7xYvBBINUU/3H
At0+N2R+PZde4qfQ4PykaH9/7ES+JVPSJmeC7i+tXwzzC53NvXdb7bip1MQaueei
wSZiSviMKBIezfBCjZ075wNYxIeHHfHsJ7qM05ttyFl5ThRRiKSMIqDyfP8TYoBP
xLwk2F+sQ2SSMQkk1dGhDP2gvhSSemkPE9S100LJ4u7In49/2ZI6do9nlimHHrsY
AEwLZh+0A/hYBXKiIJUP9+5TRU29VS21GDECkpZ3iqCl078/DzUbph10uxsnwXvK
VRhc8+WrzNLO5Hmi+3oRupqDj6lHen8jpoGwy234WOYAaRaTERndVihHGFKs/DQ=
=MK+C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-02-03-1' into staging
Merge tpm 2018/02/03 v1
# gpg: Signature made Sat 03 Feb 2018 14:02:35 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-02-03-1:
tpm: tis: move one-line function into caller
MAINTAINERS: add pointer to tpm-next repository
tpm: wrap stX_be_p in tpm_cmd_set_XYZ functions
tpm: Split off tpm_crb_reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add me as the IPMI maintainer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xjBI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-release-20180201' into staging
Lots of litte miscellaneous fixes for the IPMI code, plus
add me as the IPMI maintainer.
# gpg: Signature made Thu 01 Feb 2018 18:44:55 GMT
# gpg: using RSA key 61F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>"
# gpg: aka "Corey Minyard <minyard@acm.org>"
# gpg: aka "Corey Minyard <corey@minyard.net>"
# gpg: aka "Corey Minyard <minyard@mvista.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-release-20180201:
ipmi: Allow BMC device properties to be set
ipmi: disable IRQ and ATN on an external disconnect
ipmi: Fix macro issues
ipmi: Add the platform event message command
ipmi: Don't set the timestamp on add events that don't have it
ipmi: Fix SEL get/set time commands
Add maintainer for the IPMI code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earlier pull request included a patch which exposed a bug in
the ARM TCG backend. I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).
Higlights from this series:
* SLOF update
* Several new devices for embedded platforms
* Fix to correctly set compatiblity mode for hotplugged CPUs
* dtc compile fix for older MacOS versions
-----BEGIN PGP SIGNATURE-----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=W8lr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180111' into staging
ppc patch queue 2018-01-11
This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earlier pull request included a patch which exposed a bug in
the ARM TCG backend. I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).
Higlights from this series:
* SLOF update
* Several new devices for embedded platforms
* Fix to correctly set compatiblity mode for hotplugged CPUs
* dtc compile fix for older MacOS versions
# gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180111:
spapr: Correct compatibility mode setting for hotplugged CPUs
hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device
Update dtc to fix compilation problem on Mac OS 10.6
target/ppc: more use of the PPC_*() macros
ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency
hw/ide: Emulate SiI3112 SATA controller
spapr_pci: use warn_report()
ppc4xx_i2c: Implement basic I2C functions
sm501: Add some more unimplemented registers
sm501: Add panel hardware cursor registers also to read function
pseries: Update SLOF firmware image to qemu-slof-20171214
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a common generic PCI SATA controller that is also used in PCs
but more importantly guests running on the Sam460ex board prefer this
card and have a driver for it (unlike for other SATA controllers
already emulated).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Aneesh has been working on other topics for some time now. Let's reflect
that in the MAINTAINERS file, so that people stop Cc'ing him.
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Just so that I notice those patches more easily.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20171205072220.885-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
and remove the old i386/pc dependency.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
and fix a typo in the "PC Chipset" section
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Orphan since afb3141c66
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since I'm not working as an assignee in Linaro, replace the Linaro email
address with my personal one.
Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com>
Message-id: 1513058845-9768-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu.org enabled HTTPS in 2017 and it should be used instead of HTTP.
There are also URLs to json.org, openvpn.net, and other domains that
support HTTPS.
This patch updates the qemu.org domains everywhere and also third-party
domains that I have checked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171121120435.28728-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Voluntarily add myself as maintainer for Smartfusion2
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1510552520-3566-1-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update my email address from paul.burton@imgtec.com to
paul.burton@mips.com, since MIPS will soon no longer be a part of
Imagination Technologies & as such the @imgtec.com address will soon
cease to function.
A mapping is added in .mailmap such that git reports the new @mips.com
address, and get_maintainer.pl in turn reports it when examining git
history. Whilst here add a mapping for my also-defunct
paul@archlinuxmips.org email address too.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-trivial@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[Yongbok Kim:
Updated message subject]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Update my imgtec.com email address to my kernel.org one in MAINTAINERS
as MIPS will soon no longer be part of Imagination Technologies, and add
a mapping in .mailcap so get_maintainer.pl reports the right address.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-devel@nongnu.org
Cc: qemu-trivial@nongnu.org
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
[Yongbok Kim:
Updated message subject]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Instead of repeating the code, we are going to bo more tests on this file
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit c37cacabf2 moved tpm_cleanup() in the main loop exit, however this
function is not available when compiling with --disable-tpm.
Provides necessary stubs to keep code clean of #ifdef'fery.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
There's a new qemu-s390x@nongnu.org mailing list: add it to the
s390 sections.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use the same code base for TCG, so let's cleanly factor it
out.
The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Also add backends/tpm.c to the list of files.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.
This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com
[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[fixup] Makefile dep
Proposing myself, since I have some familiarity with the code now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
