In preparation for vhdx_create(), move more endian translation
functions out to vhdx-endian.c.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bit shifting can be fun, but in this case it was unnecessary. The
upper 44 bits of the 64-bit BAT entry is specifies the File Offset,
so we shifted the bits to get access to the value.
However, per the spec the value is in MB. So we dutifully shifted back
to the left by 20 bits, to convert to a true uint64_t file offset.
This replaces those steps with just a bit mask, to get rid of the lower
20 bits instead.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for writing to VHDX image files, using coroutines.
Writes into the BAT table goes through the VHDX log. Currently, BAT
table writes occur when expanding a dynamic VHDX file, and allocating a
new BAT entry.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for writing to the VHDX log.
For spec details, see VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750
There are a few limitations to this log support:
1.) There is no caching yet
2.) The log is flushed after each entry
The primary write interface, vhdx_log_write_and_flush(), performs a log
write followed by an immediate flush of the log.
As each log entry sector is a minimum of 4KB, partial sector writes are
filled in with data from the disk write destination.
If the current file log GUID is 0, a new GUID is generated and updated
in the header.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Regions in the image file cannot overlap - the log, region tables,
and metdata must all be unique and non-overlapping.
This adds region checking by means of a QLIST; there can be a variable
number of regions and metadata (there may be metadata or region tables
that we do not recognize / know about, but are not required).
This adds the capability to register a region for later checking, and
to check against registered regions for any overlap.
Also, if neither the BAT or Metadata region tables are found, return
error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX v0 logs, as specified in Microsoft's
VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750
The following support is added:
* Log parsing, and validation - validate that an existing log
is correct.
* Log search - search through an existing log, to find any valid
sequence of entries.
* Log replay and flush - replay an existing log, and flush/clear
the log when complete.
The VHDX log is a circular buffer, with elements (sectors) of 4KB.
A log entry is a variably-length number of sectors, that is
comprised of a header and 'descriptors', that describe each sector.
A log may contain multiple entries, know as a log sequence. In a log
sequence, each log entry immediately follows the previous entry, with an
incrementing sequence number. There can only ever be one active and
valid sequence in the log.
Each log entry must match the file log GUID in order to be valid (along
with other criteria). Once we have flushed all valid log entries, we
marked the file log GUID to be zero, which indicates a buffer with no
valid entries.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow tracking of first file write in the VHDX image, as well as
the ability to update the GUID in the header. This is in preparation
for log support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the endian translation functions out from the vhdx.c source,
into a separate source file. In addition to the previously defined
endian functions, new endian translation functions for log support are
added as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds some magic number defines, and internal structure definitions
for VHDX log replay support. The struct VHDXLogEntries does not reflect
an on-disk data structure, and thus does not need to be packed.
Some minor code style fixes are applied as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for VHDX log support, move these structures to the
header.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just a couple of minor comments to help note where allocated
buffers are freed, and a typo fix.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_setg_errno() may overwrite errno; therefore, its value should be
read before calling that function and not afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ensure that the device_add error code path deletes device objects.
Failure to do so not only leaks the objects but can also keep other
objects (like drive or netdev) alive due to qdev properties holding
references.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The following should work:
(qemu) drive_add if=none,id=drive0
(qemu) drive_del drive0
(qemu) drive_add if=none,id=drive0
Previous versions of QEMU produced a duplicate ID error because
drive_add leaked the options.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a qtest qmp() function that returns the response object. This
allows test cases to verify the result or to check for error responses.
It also allows waiting for QMP events.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Existing qmp() callers do not expect a response object. In order to
implement real QMP test cases it will be necessary to inspect the
response object.
Rename qmp() to qmp_discard_response(). Later patches will introduce a
qmp() function that returns the response object and tests that use it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
These memory leaks also make drive_add if=none,id=drive0 without a file=
option leak the options list. This keeps ID "drive0" around forever.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When creating images with backing files in the test, the backing
file argument was not quoted properly. This caused the test to fail
when run from a pathname with a space. Pass the backing argument in
with the -b option to _make_test_img, so it can be properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still a couple of instances of unquoted usage of
$TEST_IMG and $TEST_IMG.orig. Quoted these so they will not fail
on pathnames with spaces in them.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still instances of $TEST_IMG not being properly quoted.
This was in the usage of a string built up for a 'for' loop; modify
the loop so we can quote $TEST_IMG properly.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$TEST_IMG.base is used unquoted. Add quotes so that pathnames with
spaces are supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_make_test_img() currently works with spaced pathnames only when not
specifying a backing file. This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The usage of $TEST_IMG was not properly quoted everywhere in
common.pattern.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The below patch is needed to compile qemu trunk on FreeBSD with gcc48,
clang will fail.... ;). Host x84_64-freebsd.
Signed-off-by: Andreas Tobler <andreast@FreeBSD.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The actual size of the image file may differ depending on the Linux
kernel currently running on the host. Filtering out this value makes
this test pass in such cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, If the setting of video mode failed, qemu will exit. It
should go back to the previous setting if the new screen resolution
failed. This patch fixes LP#1216368, add support to revert to existing
surface for the failure of video mode setting.
Reported-by: Sascha Krissler <sascha@srlabs.de>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1378285636-7091-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Stop/cont commands are broken with -icount due to a deadlock. The
real problem is that the computation of timers_state.cpu_ticks_offset
makes no sense with -icount enabled: we set it to an icount clock value
in cpu_disable_ticks, and subtract a TSC (or similar, whatever
cpu_get_real_ticks happens to return) value in cpu_enable_ticks.
The fix is simple. timers_state.cpu_ticks_offset is only used
together with cpu_get_real_ticks, so we can use cpu_get_real_ticks
in cpu_disable_ticks. There is no need to update cpu_ticks_prev
at the time cpu_disable_ticks is called; instead, we can do it
the next time cpu_get_ticks is called.
The change to cpu_disable_ticks is the important part of the patch.
The rest modifies the code to always check timers_state.cpu_ticks_prev,
even when the ticks are not advancing (i.e. the VM is stopped). It also
makes a similar change to cpu_get_clock_locked, so that the code remains
similar for cpu_get_ticks and cpu_get_clock_locked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382977938-13844-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We currently just update the HMP NIC info when the last bit of macaddr
is written. This assumes that guest driver will write all the macaddr
from bit 0 to bit 5 when it changes the macaddr, this is the current
behavior of linux driver (e1000/rtl8139cp), but we can't do this
assumption.
The macaddr that is used for rx-filter will be updated when every bit
is changed. This patch updates the e1000/rtl8139 nic to update HMP NIC
info when every bit is changed. It will be same as virtio-net.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 1383650238-16015-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We delete without check whether it existed during exit. This will lead NULL
pointer deference since it was created conditionally depends on guest driver
status and features. So add a check of existence before trying to delete it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383728288-28469-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This was once introduced by commit 100d9891d6 but was never used in-tree
and then got broken by commit 32e0c8260d. Time to clean up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 520B6A27.4040207@siemens.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After calling dpy_gfx_replace_surface(s->con, surface), the outer
surface is invalid.
==5370== Invalid read of size 4
==5370== at 0x460229: surface_bits_per_pixel (console.h:250)
==5370== by 0x466A81: get_depth_index (vga.c:1173)
==5370== by 0x467EC2: vga_draw_graphic (vga.c:1718)
==5370== by 0x4687A5: vga_update_display (vga.c:1914)
==5370== by 0x2A782E: qxl_hw_update (qxl.c:1766)
==5370== by 0x3EB83B: graphic_hw_update (console.c:254)
==5370== by 0x3FBE31: qemu_spice_display_refresh (spice-display.c:418)
==5370== by 0x2A7D01: display_refresh (qxl.c:1886)
==5370== by 0x3EEE1C: dpy_refresh (console.c:1436)
==5370== by 0x3EB543: gui_update (console.c:192)
==5370== by 0x3C43B3: timerlist_run_timers (qemu-timer.c:488)
==5370== by 0x3C4416: qemu_clock_run_timers (qemu-timer.c:499)
==5370== Address 0x22ffb1e0 is 0 bytes inside a block of size 56 free'd
==5370== at 0x4A074C4: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==5370== by 0x4245FC: free_and_trace (vl.c:2771)
==5370== by 0x50899AE: g_free (gmem.c:252)
==5370== by 0x3EE8D3: qemu_free_displaysurface (console.c:1332)
==5370== by 0x3EEDB7: dpy_gfx_replace_surface (console.c:1427)
==5370== by 0x467EB6: vga_draw_graphic (vga.c:1714)
==5370== by 0x4687A5: vga_update_display (vga.c:1914)
==5370== by 0x2A782E: qxl_hw_update (qxl.c:1766)
==5370== by 0x3EB83B: graphic_hw_update (console.c:254)
==5370== by 0x3FBE31: qemu_spice_display_refresh (spice-display.c:418)
==5370== by 0x2A7D01: display_refresh (qxl.c:1886)
==5370== by 0x3EEE1C: dpy_refresh (console.c:1436)
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1383664554-15248-1-git-send-email-marcandre.lureau@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
On 32-bit hosts:
CC tests/test-opts-visitor.o
tests/test-opts-visitor.c: In function 'test_value':
tests/test-opts-visitor.c:128: warning: integer constant is too large for 'long' type
CC tests/test-bitops.o
tests/test-bitops.c:34: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
CC tests/endianness-test.o
tests/endianness-test.c:47: warning: integer constant is too large for 'long' type
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1383669768-23926-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The documentation of how overlapping memory regions behave and how
the priority system works was rather brief, and confusion about
priorities seems to be quite common for developers trying to understand
how the memory region system works, so expand and clarify it.
This includes a worked example with overlaps, documentation of the
behaviour when an overlapped container has "holes", and mention
that it's valid for a region to have both MMIO callbacks and
subregions (and how this interacts with priorities when it does).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1381848154-31602-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_32wu() with stl_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-10-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be64wu() with stq_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-9-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be32wu() with stl_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-8-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be16wu() with stw_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-7-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy be32_to_cpupu() with ldl_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy le32_to_cpupu() with ldl_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy le16_to_cpupu() with lduw_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_le32wu() with stl_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
