hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200518140309.5220-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
size calculation isn't correct with guest-supplied stride, the last
display line isn't accounted for correctly.
For the typical case of stride > linesize (add padding) we error on the
safe side (calculated size is larger than actual size).
With stride < linesize (scanlines overlap) the calculated size is
smaller than the actual size though so our guest memory mapping might
end up being too small.
While being at it also fix ramfb_create_display_surface to use hwaddr
for the parameters. That way all calculation are done with hwaddr type
and we can't get funny effects from type castings.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-7-kraxel@redhat.com
Store width & height & surface in local variables. Update RAMFBState
with the new values only in case the ramfb_create_display_surface() call
succeeds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-5-kraxel@redhat.com
This reverts commit a9e0cb67b7.
This breaks OVMF. Reproducer: Just hit 'ESC' at early boot to enter
firmware setup. OVMF wants switch from (default) 800x600 to 640x480 for
that, and this patch blocks it.
Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-3-kraxel@redhat.com
This reverts commit f79081b4b7.
Patch has broken byteorder handling: RAMFBCfg fields are in bigendian
byteorder, the reset function doesn't care so native byteorder is used
instead. Given this went unnoticed so far the feature is obviously
unused, so just revert the patch.
Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-2-kraxel@redhat.com
The "framebuffer.h" header is not an exported include.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504082003.16298-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to docs bits 1 and 0 of MM_INDEX are hard coded to 0 so
unaligned access via this register should not be possible.
This also fixes problems reported in bug #1878134.
Buglink: https://bugs.launchpad.net/qemu/+bug/1878134
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-id: 20200516132352.39E9374594E@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DEVICE() macro is defined as:
#define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)
which expands to:
((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__,
__func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.
Patch created mechanically using spatch with this script:
@@
typedef DeviceState;
DeviceState *s;
@@
- DEVICE(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With virtio-vga, pci bar are reordered. Bar #2 is used for compatibility
with stdvga. By default, bar #2 is used by virtio modern io bar.
This bar is the last one introduce in the virtio pci bar layout and it's
crushed by the virtio-vga reordering. So virtio-vga and
modern-pio-notify are incompatible because virtio-vga failed to
initialize with this option.
This fix sets the modern io bar to the bar #5 to avoid conflict.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Message-Id: <20200422215455.10244-1-anthoine.bourgeois@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In some corner cases (that never happen during normal operation but a
malicious guest could program wrong values) pixman functions were
called with parameters that result in a crash. Fix this and add more
checks to disallow such cases.
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200406204029.19559747D5D@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The license is the 'GNU General Public License v2.0 or later',
not 'and':
This program is free software; you can redistribute it and/ori
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
Fix the license comment.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid orphan memory regions being added in the /unattached QOM
container.
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The bochs-display mmio bar has some sub-regions with the actual hardware
registers. What happens when the guest access something outside those
regions depends on the archirecture. On x86 those reads succeed (and
return 0xff I think). On risc-v qemu aborts.
This patch adds handlers for the parent region, to make the wanted
behavior explicit and to make things consistent across architectures.
v2:
- use existing unassigned_io_ops.
- also cover stdvga.
Cc: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200309100009.17624-1-kraxel@redhat.com
Map qxl rom read-only into the guest, so the guest can't tamper with the
content. qxl has a shadow copy of the rom to deal with that, but the
shadow doesn't cover the mode list. A privilidged user in the guest can
manipulate the mode list and that to trick qemu into oob reads, leading
to a DoS via segfault if that read access happens to hit unmapped memory.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200225055920.17261-2-kraxel@redhat.com
To calculate screen size in centimeters we should calculate:
pixels/dpi*2.54
but not
pixels*dpi/2540
Using wrong formula we actually get 65 DPI and very small fonts.
Signed-off-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Message-id: 20200226122054.366b9cda@table.localdomain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200214001303.12873-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to have an early exit path. Delay some initializations
before the variables are used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of emitting the trace event before each call to
draw_line(), call it once at draw_line() entrance.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix warning reported by Clang static code analyzer:
hw/display/qxl.c:1634:14: warning: Value stored to 'orig_io_port' during its initialization is never read
uint32_t orig_io_port = io_port;
^~~~~~~~~~~~ ~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.
Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20200206074358.4274-1-kraxel@redhat.com
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The preferred way to test whether a trace event is enabled is to
use trace_event_get_state_backends(), because this will give the
correct answer (allowing expensive computations to be skipped)
whether the trace event is compile-time or run-time disabled.
Convert the old-style direct use of TRACE_FOO_ENABLED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200120151142.18954-4-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-4-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
hw/display/tcx.c: In function ‘tcx_dac_writel’:
hw/display/tcx.c:453:26: error: this statement may fall through [-Werror=implicit-fallthrough=]
453 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:454:9: note: here
454 | default:
| ^~~~~~~
hw/display/tcx.c: In function ‘tcx_dac_readl’:
hw/display/tcx.c:412:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
412 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:413:5: note: here
413 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Give a hint to GCC by adding the missing fall through comments.
Fixes: 55d7bfe22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191218192526.13845-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Embed the SerialMM sybus device, and re-export its "chardev" property.
That way, we can get rid of PROP_PTR "chr-state" and better track
devices relationship.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The SM501 is a Mobile Multimedia Companion Chip with 2 UARTs.
This model only implements the first UART. Being part of the
chipset, the UART block is always mapped in memory, regardless
of whether we provide a chardev backend.
Since commit 12051d82f, qemu_chr_fe_init() accepts a NULL chardev.
Let's remove the chardev check and always map the UART in the
chipset memory.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191122133623.13004-1-philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Hi,
The following patches have been extracted from the "[PATCH v6 00/25]
monitor: add asynchronous command type", as they are
reviewable/mergeable independantly.
They introduce some internal API changes, and fix
qemu_open()/qemu_close()/unlink() misusages which should be quite
harmless.
-----BEGIN PGP SIGNATURE-----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=aSgS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/screendump-pull-request' into staging
console: screendump improvements
Hi,
The following patches have been extracted from the "[PATCH v6 00/25]
monitor: add asynchronous command type", as they are
reviewable/mergeable independantly.
They introduce some internal API changes, and fix
qemu_open()/qemu_close()/unlink() misusages which should be quite
harmless.
# gpg: Signature made Fri 03 Jan 2020 09:07:51 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/screendump-pull-request:
screendump: use qemu_unlink()
osdep: add qemu_unlink()
screendump: replace FILE with QIOChannel and fix close()/qemu_close()
object: add g_autoptr support
ui: add pixman image g_autoptr support
ppm-save: pass opened fd
console: add graphic_hw_update_done()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a function to be called when a graphic update is done.
Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
