the correct UTS machine name (as expected by systemd) is "parisc",
not "hppa".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170126080449.28255-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
apt-get was hanging on linux-user hppa.
strace has shown the netlink data stream was not correctly byte swapped.
It appears the fd translator function is unregistered just after it
has been registered, so the translator function is not called.
This patch removes the fd_trans_unregister() after the do_socket()
in the TARGET_NR_socket case.
This fd_trans_unregister() was added by commit
e36800c linux-user: add signalfd/signalfd4 syscalls
when do_socket() was not registering any fd translator.
And as now it is, we must remove this fd_trans_unregister() to keep them.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170126080449.28255-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
"any" does not exist, therefore resulting in a misleading error message.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170130145025.26475-1-david@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
Add missing bits for qemu-user required for emulating Altera Nios2
userspace binaries.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-4-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The cpu.h structure that these manipulate hasn't been defined
yet, but we haven't enabled compilation yet either.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Mirror syscall_defs.h for the element type of struct timeval
and struct timespec, even though that's not 100% accurate for
each guest.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Changed the MK_ARRAY types as per above; added ioctl.h entries.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Some architectures (ppc, alpha, sparc, parisc, sh and xtensa) define the
BSD TIOCSTART and TIOCSTOP ioctls in their kernel headers to provide
compatibility to other operating systems.
Those ioctls are not implemented in Linux, nevertheless, bash will use
this ioctl if it's available on those architectures.
To avoid false warnings, add code to simply ignore those ioctls.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20161206152403.GA6651@ls3530>
Signed-off-by: Richard Henderson <rth@twiddle.net>
HPPA is a (the) stack-grows-up target, and supporting that requires
rearranging how we compute addresses while laying out the initial
program stack. In addition, hppa32 requires 64-byte stack alignment
so parameterize that as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Update helper to set the throwing location in case of div-by-0.
Cleanup divX.w and add quad word variants of divX.l.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twidle.net>
[laurent: modified to clear Z on overflow, as found with risu]
Future patches will enforce the holding of mmap_lock() when we are
manipulating internal memory structures. Technically it doesn't matter
in the case of elfload as we haven't started executing yet. However it
is easier to grab the lock when required than special case the
translate-all API.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds asserts to check the locking on the various translation
engines structures. There are two sets of structures that are protected
by locks.
The first the l1map and PageDesc structures used to track which
translation blocks are associated with which physical addresses. In
user-mode this is covered by the mmap_lock.
The second case are TB context related structures which are protected by
tb_lock which is also user-mode only.
Currently the asserts do nothing in SoftMMU mode but this will change
for MTTCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. However, portable parallel
code is written assuming only cmpxchg which means that in
practice this is a viable alternative.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-30-git-send-email-cota@braap.org>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twidle.net>
Message-Id: <1467054136-10430-29-git-send-email-cota@braap.org>
The variable parallel_cpus controls the generation of thread aware
atomic code. We only need to set it once we clone our first thread.
At this point any existing translations need to be thrown away.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Version 2.0 of the semihosting specification introduces new trap
instructions for AArch32: HLT 0xF000 for A32 and HLT 0x3C for T32.
Implement these (in the same way we implement the existing HLT
semihosting trap for A64).
The old traps via SVC and BKPT are unaffected.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1476792973-18508-1-git-send-email-peter.maydell@linaro.org
The output string QEMU with "--version" is very long, it does
not fit into a normal line of a terminal window anymore. By
putting the copyright information on a separate line instead,
the output looks much nicer.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This system call performs the same task as the writev() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the pwritev() implementation is based on the writev()
implementation in linux-user mode.
But, since pwritev() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.
The pos_l and pos_h argument of the safe_pwritev() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_pwritev().
Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This system call performs the same task as the readv() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the preadv() implementation is based on the readv()
implementation in linux-user mode.
But, since preadv() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.
The pos_l and pos_h argument of the safe_preadv() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_preadv().
Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
By looking at the file arch/mips/kernel/scall32-o32.S in Linux
kernel, it can be deduced that, for Mips32 platform, syscall
corresponding to number _NR_fadvise64 as defined in kernel file
arch/mips/include/uapi/asm/unistd.h translates to kernel function
sys_fadvise64_64, and that argument layout for this system call is
as follows:
0 32 0 32
+----------------+----------------+
(arg1) | fd | __pad | (arg2)
+----------------+----------------+
(arg3) | buffer | (arg4)
+----------------+----------------+
(arg5) | len | (arg6)
+----------------+----------------+
(arg7) | advise | not used | (arg8)
+----------------+----------------+
The same argument layout can be deduced from glibc code, and
relevant commit messages in linux kernel and glibc.
The fix is to change TARGET_NR_fadvise64 to TARGET_NR_fadvise64_64
in Mips32 syscall numbers table. Array mips_syscall_args[] in
linux-user/main.c also already have "fadvise64_64" (and not
"fadvise64") in corresponding place for the syscall number in
question, so no change for linux-user/main.c.
This patch also fixes the failure LTP test posix_fadvise03, if
executed on Qemu-emulated Mips32 platform (user mode).
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Miroslav Tisma <miroslav.tisma@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
linux-user/mips64/termbits.h and linux-user/mips/termbits.h
originate from the same files in Linux kernel. There is no plan
to split original headers in Linux kernel into Mips32 and Mips64
versions any time soon. Therefore, it is better not to have
separate Mips32 and Mips64 variants in Qemu.
This patch makes these two files effectively the same, allowing the
mainenance by changing only a single file. (This is already done in
the same fashion for some other headers in same directories.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Array mips_syscall_args[] determines number of arguments for each
syscall on Mips32. It wasn't updated with newer syscalls. Also,
preadv and pwritev have 5 arguments, not 6.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode syncfs() syscall support. Syscall
syncfs() syncs the filesystem containing file determined by the open
file descriptor passed as the argument to syncfs().
The implementation consists of a straightforward invocation of host's
syncfs(). Configure and strace support is included as well.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode clock_adjtime() syscall support.
The implementation is based on invocation of host's clock_adjtime().
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sigevent structure includes a union with some fields which
are pointers. For the QEMU target_sigevent structure we must
represent these as abi_ulongs, not host function pointers.
This error was causing the compiler to believe it should 8-align
the _sigev_un union on a 64-bit host, which meant that the
code in target_to_host_sigevent() was looking at the wrong
offset to find the _tid field, and timer_create() would
spuriously fail with EINVAL.
This fixes the final loose end noted in LP:1042388.
While we're editing the structure, switch the 'int32_t' fields
to 'abi_int'; this will only matter for guests with non-standard
integer alignment like m68k.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit essentially reverts commit
3af72a4d98, which has replaced
five-argument calls to mremap() by direct mremap syscalls for
compatibility with glibc older than version 2.4.
The direct syscall was buggy for 64bit targets on 32bit hosts
because of the default integer type promotions. Since glibc-2.4
is now a decade old, we can remove this workaround.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The epoll event array which epoll_wait() allocates has a size
determined by the guest which could potentially be quite large.
Use g_try_new() rather than alloca() so that we can fail more
cleanly if the guest hands us an oversize value. (ENOMEM is
not a documented return value for epoll_wait() but in practice
some kernel configurations can return it -- see for instance
sys_oabi_epoll_wait() on ARM.)
This rearrangement includes fixing a bug where we were
incorrectly passing a negative length to unlock_user() in
the error-exit codepath.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Used by fedora21 on ppc64 in the network initialization
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In commit 40df8c0c0722 support was added for target-specific
handling of SHMLBA. Unfortunately the sparc64-specific part
of the change got lost somewhere between the patch being
posted to the list and going into master:
http://patchwork.ozlabs.org/patch/646980/http://patchwork.ozlabs.org/patch/673339/
Add the accidentally-dropped code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There is a duplicate item in strace.list. It is benign, but it
shouldn't be there, since it may lead to confusion and even bugs
in the future. It is the only duplicate in strace.list. This
patch removes it.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There are currently several problems related to syslog() support.
For example, if the second argument "bufp" of target syslog() syscall
is NULL, the current implementation always returns error code EFAULT.
However, NULL is a perfectly valid value for the second argument for
many use cases of this syscall. This is, for example, visible from
this excerpt of man page for syslog(2):
> EINVAL Bad arguments (e.g., bad type; or for type 2, 3, or 4, buf is
> NULL, or len is less than zero; or for type 8, the level is
> outside the range 1 to 8).
Moreover, the argument "bufp" is ignored for all cases of values of the
first argument, except 2, 3 and 4. This means that for such cases
(the first argument is not 2, 3 or 4), there is no need to pass "buf"
between host and target, and it can be set to NULL while calling host's
syslog(), without loss of emulation accuracy.
Note also that if "bufp" is NULL and the first argument is 2, 3 or 4, the
correct returned error code is EINVAL, not EFAULT.
All these details are reflected in this patch.
"#ifdef TARGET_NR_syslog" is also proprerly inserted when needed.
Support for Qemu's "-strace" switch for syslog() syscall is included too.
LTP tests syslog11 and syslog12 pass with this patch (while fail without
it), on any platform.
Changes to original patch by Riku Voipio:
fixed error paths in TARGET_SYSLOG_ACTION_READ_ALL to match
http://lxr.free-electrons.com/source/kernel/printk/printk.c?v=4.7#L1335
Should fix also the build error in:
https://lists.gnu.org/archive/html/qemu-devel/2016-10/msg03721.html
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since not all Linux host platforms support socketcall() (most notably
Intel), do_socketcall() function in Qemu's syscalls.c is implemented to
mirror the corespondant implementation of socketcall() in Linux kernel,
and to utilise individual socket operations that are supported on all
Linux platforms. (see kernel source file net/socket.c, definition of
socketcall).
However, error codes produced by Qemu implementation are wrong for the
cases of invalid values of the first argument. Also, naming of constants
is not consistent with kernel one, and not consistant with Qemu convention
of prefixing such constants with "TARGET_". This patch in that light
brings do_socketcall() closer to its kernel counterpart, and in that way
fixes the errors and yields more consisrtent Qemu code.
There were also three missing cases (among 20) for strace support for
socketcall(). The array that contains pointers for appropriate printing
functions is updated with 3 elements, however pointers to functions are
left NULL, and its implementation is left for future.
Also, this patch fixes failure of LTP test socketcall02, if executed on some
Qemu emulated sywstems (uer mode).
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If syscalls msgrcv() and msgsnd() fail, they return E2BIG, EACCES,
EAGAIN, EFAULT, EIDRM, EINTR, EINVAL, ENOMEM, or ENOMSG.
By examining negative scenarios of these syscalls for Mips, it was
established that ENOMSG does not have the same value accross all
platforms, but it is nevertheless not included for conversion in
the correspondant conversion table defined in linux-user/syscall.c.
This is certainly a bug, since it leads to the incorrect emulation
of msgrcv() and msgsnd() for scenarios involving ENOMSG.
This patch fixes this by extending the conversion table to include
ENOMSG.
Also, LTP test msgrcv04 will be fixed for some platforms.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Conversion of file creation flags (O_CREAT, ...) from target to host
was missing.
Also, this patch implements better error handling.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Laurent Vivier
David Hildenbrand
Peter Maydell
Marek Vasut
Richard Henderson
Helge Deller
Artyom Tarasenko
Alex Bennée
Emilio G. Cota
Thomas Huth
Dejan Jovicevic
Aleksandar Markovic
Felix Janda