Virtqueue notifications are not necessary during polling, so we disable
them. This allows the guest driver to avoid MMIO vmexits.
Unfortunately the virtio-blk and virtio-scsi handler functions re-enable
notifications, defeating this optimization.
Fix virtio-blk and virtio-scsi emulation so they leave notifications
disabled. The key thing to remember for correctness is that polling
always checks one last time after ending its loop, therefore it's safe
to lose the race when re-enabling notifications at the end of polling.
There is a measurable performance improvement of 5-10% with the null-co
block driver. Real-life storage configurations will see a smaller
improvement because the MMIO vmexit overhead contributes less to
latency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209210957.65087-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the SLOF firmware for pseries guests will disable/re-enable
a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND
register after the initial probe/feature negotiation, as it tends to
work with a single device at a time at various stages like probing
and running block/network bootloaders without doing a full reset
in-between.
In QEMU, when PCI_COMMAND_MASTER is disabled we disable the
corresponding IOMMU memory region, so DMA accesses (including to vring
fields like idx/flags) will no longer undergo the necessary
translation. Normally we wouldn't expect this to happen since it would
be misbehavior on the driver side to continue driving DMA requests.
However, in the case of pseries, with iommu_platform=on, we trigger the
following sequence when tearing down the virtio-blk dataplane ioeventfd
in response to the guest unsetting PCI_COMMAND_MASTER:
#2 0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757
#3 0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950
#4 0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0)
at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255
#5 0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776
#6 0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550
#7 0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546
#8 0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527
#9 0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8)
at /home/mdroth/w/qemu.git/util/aio-posix.c:520
#10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0)
at /home/mdroth/w/qemu.git/util/aio-posix.c:607
#11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true)
at /home/mdroth/w/qemu.git/util/aio-posix.c:639
#12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0)
at /home/mdroth/w/qemu.git/util/aio-wait.c:71
#13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>)
at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288
#14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245
#15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237
#16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292
#17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613
I.e. the calling code is only scheduling a one-shot BH for
virtio_blk_data_plane_stop_bh, but somehow we end up trying to process
an additional virtqueue entry before we get there. This is likely due
to the following check in virtio_queue_host_notifier_aio_poll:
static bool virtio_queue_host_notifier_aio_poll(void *opaque)
{
EventNotifier *n = opaque;
VirtQueue *vq = container_of(n, VirtQueue, host_notifier);
bool progress;
if (!vq->vring.desc || virtio_queue_empty(vq)) {
return false;
}
progress = virtio_queue_notify_aio_vq(vq);
namely the call to virtio_queue_empty(). In this case, since no new
requests have actually been issued, shadow_avail_idx == last_avail_idx,
so we actually try to access the vring via vring_avail_idx() to get
the latest non-shadowed idx:
int virtio_queue_empty(VirtQueue *vq)
{
bool empty;
...
if (vq->shadow_avail_idx != vq->last_avail_idx) {
return 0;
}
rcu_read_lock();
empty = vring_avail_idx(vq) == vq->last_avail_idx;
rcu_read_unlock();
return empty;
but since the IOMMU region has been disabled we get a bogus value (0
usually), which causes virtio_queue_empty() to falsely report that
there are entries to be processed, which causes errors such as:
"virtio: zero sized buffers are not allowed"
or
"virtio-blk missing headers"
and puts the device in an error state.
This patch works around the issue by introducing virtio_set_disabled(),
which sets a 'disabled' flag to bypass checks like virtio_queue_empty()
when bus-mastering is disabled. Since we'd check this flag at all the
same sites as vdev->broken, we replace those checks with an inline
function which checks for either vdev->broken or vdev->disabled.
The 'disabled' flag is only migrated when set, which should be fairly
rare, but to maintain migration compatibility we disable it's use for
older machine types. Users requiring the use of the flag in conjunction
with older machine types can set it explicitly as a virtio-device
option.
NOTES:
- This leaves some other oddities in play, like the fact that
DRIVER_OK also gets unset in response to bus-mastering being
disabled, but not restored (however the device seems to continue
working)
- Similarly, we disable the host notifier via
virtio_bus_stop_ioeventfd(), which seems to move the handling out
of virtio-blk dataplane and back into the main IO thread, and it
ends up staying there till a reset (but otherwise continues working
normally)
Cc: David Gibson <david@gibson.dropbear.id.au>,
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some guests read back queue size after writing it.
Update the size immediatly upon write otherwise
they get confused.
In particular this is the case for seabios.
Reported-by: Roman Kagan <rkagan@virtuozzo.com>
Suggested-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ivq/dvq/svq/free_page_vq is forgot to cleanup in
virtio_balloon_device_unrealize, the memory leak stack is as follow:
Direct leak of 14336 byte(s) in 2 object(s) allocated from:
#0 0x7f99fd9d8560 in calloc (/usr/lib64/libasan.so.3+0xc7560)
#1 0x7f99fcb20015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015)
#2 0x557d90638437 in virtio_add_queue hw/virtio/virtio.c:2327
#3 0x557d9064401d in virtio_balloon_device_realize hw/virtio/virtio-balloon.c:793
#4 0x557d906356f7 in virtio_device_realize hw/virtio/virtio.c:3504
#5 0x557d9073f081 in device_set_realized hw/core/qdev.c:876
#6 0x557d908b1f4d in property_set_bool qom/object.c:2080
#7 0x557d908b655e in object_property_set_qobject qom/qom-qobject.c:26
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <1575444716-17632-2-git-send-email-pannengyuan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Let's make sure calling this twice is harmless -
no known instances, but seems safer.
Suggested-by: Pan Nengyuan <pannengyuan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices tend to maintain vq pointers, allow deleting them trough a vq pointer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
The following MSI-X vectors are required:
* VIRTIO Configuration Change
* hiprio virtqueue
* requests virtqueues
Fix the calculation to reserve enough MSI-X vectors. Otherwise guest
drivers fall back to a sub-optional configuration where all virtqueues
share a single vector.
This change does not break live migration compatibility since
vhost-user-fs-pci devices are not migratable yet.
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209110759.35227-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The property doesn't make much sense for a vhost-user device.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191116112016.14872-1-marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Host notifiers are used in several cases:
1. Traditional ioeventfd where virtqueue notifications are handled in
the main loop thread.
2. IOThreads (aio_handle_output) where virtqueue notifications are
handled in an IOThread AioContext.
3. vhost where virtqueue notifications are handled by kernel vhost or
a vhost-user device backend.
Most virtqueue notifications from the guest use the ioeventfd mechanism,
but there are corner cases where QEMU code calls virtio_queue_notify().
This currently honors the host notifier for the IOThreads
aio_handle_output case, but not for the vhost case. The result is that
vhost does not receive virtqueue notifications from QEMU when
virtio_queue_notify() is called.
This patch extends virtio_queue_notify() to set the host notifier
whenever it is enabled instead of calling the vq->(aio_)handle_output()
function directly. We track the host notifier state for each virtqueue
separately since some devices may use it only for certain virtqueues.
This fixes the vhost case although it does add a trip through the
eventfd for the traditional ioeventfd case. I don't think it's worth
adding a fast path for the traditional ioeventfd case because calling
virtio_queue_notify() is rare when ioeventfd is enabled.
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191105140946.165584-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use RCU_READ_LOCK_GUARD and WITH_RCU_READ_LOCK_GUARD
to replace the manual rcu_read_(un)lock calls.
I think the only change is virtio_load which was missing unlocks
in error paths; those end up being fatal errors so it's not
that important anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191028161109.60205-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use RCU_READ_LOCK_GUARD instead of manual rcu_read_(un)lock
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191025103403.120616-2-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJdt6UAAAoJEO8Ells5jWIRdaAH/3+dufJuFijZY44VYbob92ud
lZR1dYah1fBL1bq0F2siFUb+/wgF1IXHJl9tuUJe8Kp0+hnsXji2s4Iuq5lNQoJj
wwMGziL1TPkhxwgy4jObIC+/bqZVrzAO4Cd+PARrSGAAbAqjxLPizOaf72/t4kdn
C2n87ZlR5k0EOPmUY6Y2DtHtrJ20usSS6EThGhdW7iPSzfQSGiOdRzfZrSiEV2XT
cuKbSzQxk7pbPcz4jIgLzaoA7FIXwm99dBosUkjPszNNFbO4+OPDNdUBanYuqmn/
0ZPe/9YZpEMV64ps/Ab7lx7YB04wZ+A9Etln2JULhBWXg/oyri9gsqgOc6bfCXg=
=uE5S
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Fix incorrect `if` logic
virtio-net: prevent offloads reset on migration
virtio: new post_load hook
net: add tulip (dec21143) driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Post load hook in virtio vmsd is called early while device is processed,
and when VirtIODevice core isn't fully initialized. Most device
specific code isn't ready to deal with a device in such state, and
behaves weirdly.
Add a new post_load hook in a device class instead. Devices should use
this unless they specifically want to verify the migration stream as
it's processed, e.g. for bounds checking.
Cc: qemu-stable@nongnu.org
Suggested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdsuDvAAoJECgfDbjSjVRpIP8H/3rHSvZ5+MQGCFLI5GU8m3za
JSOaBSmtcj9KwrpibBfptSCJZNrG8EUVHyo+Z+pvGohXqDB8h9RyBfb6vID8jqzC
5wIzlNBP27F668MUBt2t7xSwK0PWO1QOpEKk6S4SJMpl51ea8ePlTH0jnLVfkaAN
hFKU1wqwc2gMyF9rDjOZ6I+OO1iQbMcrsazFrCXECXCkxDcJM0ey7MheKxVntTjt
0sxFHM2I1A+vXtAzlLo6rS3I9vJ0ATfLfOlZLqrq5uSAL5FKrqsbmGh4sAsFTQAA
eerR6zDz3X+YqfQaVgVk2wixPHQz2w8Rv68j6SiGrdZ29/JT6nVWHT8cGtPsX4c=
=iJuG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio: features, tests
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 25 Oct 2019 12:47:59 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio: drop unused virtio_device_stop_ioeventfd() function
libqos: add VIRTIO PCI 1.0 support
libqos: extract Legacy virtio-pci.c code
libqos: make the virtio-pci BAR index configurable
libqos: expose common virtqueue setup/cleanup functions
libqos: add MSI-X callbacks to QVirtioPCIDevice
libqos: pass full QVirtQueue to set_queue_address()
libqos: add iteration support to qpci_find_capability()
libqos: access VIRTIO 1.0 vring in little-endian
libqos: implement VIRTIO 1.0 FEATURES_OK step
libqos: enforce Device Initialization order
libqos: add missing virtio-9p feature negotiation
tests/virtio-blk-test: set up virtqueue after feature negotiation
virtio-scsi-test: add missing feature negotiation
libqos: extend feature bits to 64-bit
libqos: read QVIRTIO_MMIO_VERSION register
tests/virtio-blk-test: read config space after feature negotiation
virtio: add property to enable packed virtqueue
vhost_net: enable packed ring support
virtio: event suppression support for packed ring
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio_device_stop_ioeventfd() has not been used since commit
310837de6c ("virtio: introduce
grab/release_ioeventfd to fix vhost") in 2016.
Nowadays ioeventfd is stopped implicitly by the virtio transport when
lifecycle events such as the VM pausing or device unplug occur.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191021150343.30742-1-stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements event suppression through device/driver
area. Please refer virtio specification for more information.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements basic support for the packed virtqueue. Compare
the split virtqueue which has three rings, packed virtqueue only have
one which is supposed to have better cache utilization and more
hardware friendly.
Please refer virtio specification for more information.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function virtio_del_queue was not called at unrealize() callback.
This was detected due to add an allocated element on the vq introduce
in future commits (used_elems) and running address sanitizer memory
leak detector.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is slight size difference between split/packed rings.
This is the refactor of split ring as well as a helper to expanding
device and driver area size calculation for packed ring.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191025083527.30803-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Define packed ring structure according to Qemu nomenclature,
field data(wrap counter, etc) are also included.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191025083527.30803-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Put QOM and main struct definition in a separate header file, so it
can be accessed from other components.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the PCI version of vhost-user-fs.
Launch QEMU like this:
qemu -chardev socket,path=/tmp/vhost-fs.sock,id=chr0
-device vhost-user-fs-pci,tag=myfs,chardev=chr0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190930105135.27244-4-dgilbert@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-fs virtio device provides shared file system access using
the FUSE protocol carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190930105135.27244-3-dgilbert@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.
So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.
All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.
in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using memcmp to compare structures wasn't safe,
as I found out on ARM when I was getting falce miscompares.
Use the helper function for comparing the MRSs.
Fixes: ade6d081fc ("vhost: Regenerate region list from changed sections list")
Cc: qemu-stable@nongnu.org
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190814175535.2023-4-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the modern (v2) personality, according to the VirtIO 1.0
specification.
Support for v2 among guests is not as widespread as it'd be
desirable. While the Linux driver has had it for a while, support is
missing, at least, from Tianocore EDK II, NetBSD and FreeBSD.
For this reason, the v2 personality is disabled, keeping the legacy
behavior as default. Machine types willing to use v2, can enable it
using MachineClass's compat_props.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20190913120559.40835-1-slp@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using FLR becomes convenient in cases where resetting the bus is
impractical, for example, when debugging the behavior of individual
functions.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20190820163005.1880-1-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The default backend is only used within virtio_rng_device_realize().
Replace VirtIORNGConf member default_backend by a local variable.
Adjust its type to reduce conversions.
While there, pass &error_abort instead of NULL when failure would be a
programming error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190820160615.14616-3-lvivier@redhat.com>
Now that MemOp has been pushed down into the memory API, and
callers are encoding endianness, we can collapse byte swaps
along the I/O path into the accelerator and target independent
adjust_endianness.
Collapsing byte swaps along the I/O path enables additional endian
inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant
byte swaps cancelling out.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <911ff31af11922a9afba9b7ce128af8b8b80f316.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <ebf1f78029d5ac1de1739a11d679740a87a1f02f.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move the HostMemoryBackend typedef from sysemu/hostmem.h to
qemu/typedefs.h. This renders a few inclusions of sysemu/hostmem.h
superfluous; drop them.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-25-armbru@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit f2784eed30
since that accidentally removes the PCIe capabilities from virtio
devices because virtio_pci_dc_realize is called before the new 'mode'
flag is set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190729162903.4489-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Previous patches switched to a temporary pbp but that does not go far
enough: after device uses a buffer, guest is free to reuse it, so
tracking the page and freeing it later is wrong.
Free and reset the pbp after we push each element.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Cc: qemu-stable@nongnu.org #v4.0.0
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As ramblocks cannot get removed/readded while we are processing a bulk
of inflation requests, there is no more need to track the page size
in form of the number of subpages.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190725113638.4702-8-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We still have multiple issues in the current code
- The PBP is not freed during unrealize()
- The PBP is not reset on device resets: After a reset, the PBP is stale.
- We are not indicating VIRTIO_BALLOON_F_MUST_TELL_HOST, therefore
guests (esp. legacy guests) will reuse pages without deflating,
turning the PBP stale. Adding that would require compat handling.
Instead, let's use the PBP only temporarily, when processing one bulk of
inflation requests. This will keep guest_page_size > 4k working (with
Linux guests). There is nothing to do for deflation requests anymore.
The pbp is only used for a limited amount of time.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Cc: qemu-stable@nongnu.org #v4.0.0
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Using the address of a RAMBlock to test for a matching pbp is not really
safe. Instead, let's use the guest physical address of the base page
along with the page size (via the number of subpages).
Also, let's allocate the bitmap separately. This makes the code
easier to read and maintain - we can reuse bitmap_new().
Prepare the code to move the PBP out of the device.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Fixes: b27b323914 ("virtio-balloon: Fix possible guest memory corruption with inflates & deflates")
Cc: qemu-stable@nongnu.org #v4.0.0
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-6-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"host_page_base" is really confusing, let's make this clearer, also
rename the other offsets to indicate to which base they apply.
offset -> mr_offset
ram_offset -> rb_offset
host_page_base -> rb_aligned_offset
While at it, use QEMU_ALIGN_DOWN() instead of a handcrafted computation
and move the computation to the place where it is needed.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-5-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's simplify this - the case we are optimizing for is very hard to
trigger and not worth the effort. If we're switching from inflation to
deflation, let's reset the pbp.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are using the wrong functions to set/clear bits, effectively touching
multiple bits, writing out of range of the bitmap, resulting in memory
corruptions. We have to use set_bit()/clear_bit() instead.
Can easily be reproduced by starting a qemu guest on hugetlbfs memory,
inflating the balloon. QEMU crashes. This never could have worked
properly - especially, also pages would have been discarded when the
first sub-page would be inflated (the whole bitmap would be set).
While testing I realized, that on hugetlbfs it is pretty much impossible
to discard a page - the guest just frees the 4k sub-pages in random order
most of the time. I was only able to discard a hugepage a handful of
times - so I hope that now works correctly.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Fixes: b27b323914 ("virtio-balloon: Fix possible guest memory corruption with inflates & deflates")
Cc: qemu-stable@nongnu.org #v4.0.0
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we directly cast from int to uint64_t, we will first sign-extend to
an int64_t, which is wrong. We actually want to treat the PFNs like
unsigned values.
As far as I can see, this dates back to the initial virtio-balloon
commit, but wasn't triggered as fairly big guests would be required.
Cc: qemu-stable@nongnu.org
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Remove transitional & non transitional names for virtio pmem.
Only virtio 1.0 and up is supported.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190712073554.21918-4-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Coverity reports that when we're assigning vi->size we handle the
"pmem->memdev is NULL" case; but we then pass it into
object_get_canonical_path(), which unconditionally dereferences it
and will crash if it is NULL. If this pointer can be NULL then we
need to do something else here.
We are removing 'pmem->memdev' null check here as memdev will never
be null in this function.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190712073554.21918-3-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Coverity reported memory region returns zero
for non-null value. This is because of wrong
arguments to '?:' , fixing this.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190712073554.21918-2-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The virtio-balloon config size changed in QEMU 4.0 even for existing
machine types. Migration from QEMU 3.1 to 4.0 can fail in some
circumstances with the following error:
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: a1 device: 1 cmask: ff wmask: c0 w1cmask:0
This happens because the virtio-balloon config size affects the VIRTIO
Legacy I/O Memory PCI BAR size.
Introduce a qdev property called "qemu-4-0-config-size" and enable it
only for the QEMU 4.0 machine types. This way <4.0 machine types use
the old size, 4.0 uses the larger size, and >4.0 machine types use the
appropriate size depending on enabled virtio-balloon features.
Live migration to and from old QEMUs to QEMU 4.1 works again as long as
a versioned machine type is specified (do not use just "pc"!).
Originally-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190710141440.27635-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the 'cont' command resumes guest execution the vm change state
handlers are invoked. Unfortunately there is no explicit ordering
between classic qemu_add_vm_change_state_handler() callbacks. When two
layers of code both use vm change state handlers, we don't control which
handler runs first.
virtio-scsi with iothreads hits a deadlock when a failed SCSI command is
restarted and completes before the iothread is re-initialized.
This patch uses the new qdev_add_vm_change_state_handler() API to
guarantee that virtio-scsi's virtio change state handler executes before
the SCSI bus children. This way DMA is restarted after the iothread has
re-initialized.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will call virtio_set_status() on virtio_vmstate_change().
The "started" flag should not be changed in this case. Otherwise,
we may get an incorrect value when we set "started" flag but
not set DRIVER_OK in source VM.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-6-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should set the flags: "start_on_kick" and "started" after we call
the kick functions (handle_aio_output() and handle_output()).
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest feature is not set correctly on virtio_reset() and
virtio_init(). So we should not use it to set "start_on_kick" at that
point. This patch set "start_on_kick" on virtio_set_features() instead.
Fixes: badaf79cfd ("virtio: Introduce started flag to VirtioDevice")
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190626023130.31315-4-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Besides virtio 1.0 transitional devices, we should also
set "start_on_kick" flag for legacy devices (virtio 0.9).
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190626023130.31315-3-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to avoid migration issues, we introduce a "use-started"
property to the base virtio device to indicate whether use
"started" flag or not. This property will be true by default and
set to false when machine type <= 4.0.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-2-xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit a4ee4c8baa ("virtio: Helper for registering virtio
device types"), virtio-gpu-pci, virtio-vga, and virtio-crypto-pci lost
some properties: "ioeventfd" and "vectors". This may cause various
issues, such as failing migration or invalid properties.
Since those VirtioPCI devices do not have a base name, their class are
initialized with virtio_pci_generic_base_class_init(). However, if the
VirtioPCIDeviceTypeInfo provided a class_init which sets dc->props,
the properties were overwritten by virtio_pci_generic_class_init().
Instead, introduce an intermediary base-type to register the generic
properties.
Fixes: a4ee4c8baa
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190625232333.30752-1-marcandre.lureau@redhat.com>
We need a proxy device for virtio-pmem, and this device has to be the
actual memory device so we can cleanly hotplug it.
Forward memory device class functions either to the actual device or use
properties of the virtio-pmem device to implement these in the proxy.
virtio-pmem will only be compiled for selected, supported architectures
(that can deal with virtio/pci devices being memory devices). An
architecture that is prepared for that can simply enable
CONFIG_VIRTIO_PMEM to make it work.
As not all architectures support memory devices (and CONFIG_VIRTIO_PMEM
will be enabled per supported architecture), we have to move the PCI proxy
to a separate file.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
[ split up patches, memory-device changes, move pci proxy]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-5-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's allow to specify additional interfaces for the base type (e.g.
later TYPE_MEMORY_DEVICE), something that was possible before the
rework of virtio PCI device instantiation.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-3-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the implementation of virtio-pmem device. Support will require
machine changes for the architectures that will support it, so it will
not yet be compiled. It can be unlocked with VIRTIO_PMEM_SUPPORTED per
machine and disabled globally via VIRTIO_PMEM.
We cannot use the "addr" property as that is already used e.g. for
virtio-pci/pci devices. And we will have e.g. virtio-pmem-pci as a proxy.
So we have to choose a different one (unfortunately). "memaddr" it is.
That name should ideally be used by all other virtio-* based memory
devices in the future.
-device virtio-pmem-pci,id=p0,bus=bux0,addr=0x01,memaddr=0x1000000...
Acked-by: Markus Armbruster <armbru@redhat.com>
[ QAPI bits ]
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
[ MemoryDevice/MemoryRegion changes, cleanups, addr property "memaddr",
split up patches, unplug handler ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-2-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When a guest which doesn't support multiqueue is migrated with a multi queues
vhost-user-blk deivce, a crash will occur like:
0 qemu_memfd_alloc (name=<value optimized out>, size=562949953421312, seals=<value optimized out>, fd=0x7f87171fe8b4, errp=0x7f87171fe8a8) at util/memfd.c:153
1 0x00007f883559d7cf in vhost_log_alloc (size=70368744177664, share=true) at hw/virtio/vhost.c:186
2 0x00007f88355a0758 in vhost_log_get (listener=0x7f8838bd7940, enable=1) at qemu-2-12/hw/virtio/vhost.c:211
3 vhost_dev_log_resize (listener=0x7f8838bd7940, enable=1) at hw/virtio/vhost.c:263
4 vhost_migration_log (listener=0x7f8838bd7940, enable=1) at hw/virtio/vhost.c:787
5 0x00007f88355463d6 in memory_global_dirty_log_start () at memory.c:2503
6 0x00007f8835550577 in ram_init_bitmaps (f=0x7f88384ce600, opaque=0x7f8836024098) at migration/ram.c:2173
7 ram_init_all (f=0x7f88384ce600, opaque=0x7f8836024098) at migration/ram.c:2192
8 ram_save_setup (f=0x7f88384ce600, opaque=0x7f8836024098) at migration/ram.c:2219
9 0x00007f88357a419d in qemu_savevm_state_setup (f=0x7f88384ce600) at migration/savevm.c:1002
10 0x00007f883579fc3e in migration_thread (opaque=0x7f8837530400) at migration/migration.c:2382
11 0x00007f8832447893 in start_thread () from /lib64/libpthread.so.0
12 0x00007f8832178bfd in clone () from /lib64/libc.so.6
This is because vhost_get_log_size() returns a overflowed vhost-log size.
In this function, it uses the uninitialized variable vqs->used_phys and
vqs->used_size to get the vhost-log size.
Signed-off-by: Li Hangjing <lihangjing@baidu.com>
Reviewed-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Chai Wen <chaiwen@baidu.com>
Message-Id: <20190603061524.24076-1-lihangjing@baidu.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc+B4YAAoJECgfDbjSjVRpq1EIAJR7tCxcpu9GggVlinmUA8G4
tmSAe06IryH7+nF3RsnINuGu7ius9qC2/E2y0uJUHhTqiU/RWOfWZ7PPM0EcYZaA
TLPaCe2NUF6/8afeqmvE9Usk7VspI5TDZRms+bonmZz2xP1lHIMN0qW4s7HHLWr8
sZKDtCJ+9cYII93VQwtlR0qiHgv5f0kzcuZeJaZHsAHH6XZGqRuQjI6txcFa4o53
lkdLCEwTnRuwu2wyL84eL5p+E8SzOgR/x1QI+nffrJfsvnmiT7lnOrkjnQlWAp5G
xqwqsUrUxUCuQ+zitwJqmv+H6nx79MwAM7fTHAETCWX703N5o9tZxAnHHqLoa8I=
=cQNg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: cleanups, features
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 05 Jun 2019 20:55:04 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
bios-tables-test: ignore identical binaries
tests: acpi: add simple arm/virt testcase
tests: add expected ACPI tables for arm/virt board
bios-tables-test: list all tables that differ
vhost-scsi: Allow user to enable migration
vhost-scsi: Add VMState descriptor
vhost-scsi: The vhost backend should be stopped when the VM is not running
bios-tables-test: add diff allowed list
vhost: fix memory leak in vhost_user_scsi_realize
vhost: fix incorrect print type
vhost: remove the dead code
docs: smbios: remove family=x from type2 entry description
pci: Fold pci_get_bus_devfn() into its sole caller
pci: Make is_bridge a bool
pcie: Simplify pci_adjust_config_limit()
acpi: pci: use build_append_foo() API to construct MCFG
hw/acpi: Consolidate build_mcfg to pci.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fix incorrect print type in vhost_virtqueue_stop
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
remove the dead code
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556604614-32081-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.
Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.
See vhost-user-gpu.rst for the protocol details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As explained in commit aff39be0ed97:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
This patch was generated using the following Coccinelle script:
@use_object_initialize_child@
expression parent_obj;
expression child_ptr;
expression child_name;
expression child_type;
expression child_size;
expression errp;
@@
(
- object_initialize(child_ptr, child_size, child_type);
+ object_initialize_child(parent_obj, child_name, child_ptr, child_size,
+ child_type, &error_abort, NULL);
... when != parent_obj
- object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL);
...
?- object_unref(OBJECT(child_ptr));
|
- object_initialize(child_ptr, child_size, child_type);
+ object_initialize_child(parent_obj, child_name, child_ptr, child_size,
+ child_type, errp, NULL);
... when != parent_obj
- object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp);
...
?- object_unref(OBJECT(child_ptr));
)
While the object_initialize() function doesn't take an
'Error *errp' argument, the object_initialize_child() does.
Since this code is used when a machine is created (and is not
yet running), we deliberately choose to use the &error_abort
argument instead of ignoring errors if an object creation failed.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190507163416.24647-4-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use traces for debug message and qemu_log_mask for errors.
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190503154424.73933-1-liboxuan@connect.hku.hk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
pci_bus_is_root() currently relies on a method in the PCIBusClass.
But it's always known if a PCI bus is a root bus when we create it, so
using a dynamic method is overkill.
This replaces it with an IS_ROOT bit in a new flags field, which is set on
root buses and otherwise clear. As a bonus this removes the special
is_root logic from pci_expander_bridge, since it already creates its bus
as a root bus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190424041959.4087-3-david@gibson.dropbear.id.au>
Currently, we use DRIVER_OK status bit to check whether guest
driver has started the device in virtio_vmstate_change(). But it's
not the case for virtio 1.0 transitional devices. If migration completes
between kicking virtqueue and setting VIRTIO_CONFIG_S_DRIVER_OK, guest
may be hung. So here we use started flag to check guest state instead.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-3-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio 1.0 transitional devices support driver uses the device
before setting the DRIVER_OK status bit. So we introduce a started
flag to indicate whether driver has started the device or not.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-2-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A number of virtio devices (gpu, crypto, mouse, keyboard, tablet) only
support the virtio-1 (aka modern) mode. Currently if the user launches
QEMU, setting those devices to enable legacy mode, QEMU will silently
create them in modern mode, ignoring the user's (mistaken) request.
This patch introduces proper data validation so that an attempt to
configure a virtio-1-only devices in legacy mode gets reported as an
error to the user.
Checking this required introduction of a new field to explicitly track
what operating model is to be used for a device, separately from the
disable_modern and disable_legacy fields that record the user's
requested configuration.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190215103239.28640-2-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set backend unconditionally, this won't work for some
guests (e.g windows driver) who may not initialize all virtqueues. For
kernel backend, this will fail since it may try to validate the rings
during setting backend.
Fixing this by simply skipping the backend set when we find desc is
not ready.
Reviewed-by: Michael S. Tsirkin<mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio input is virtio-1.0 only, so we don't need the -transitional and
-non-transitional variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190510105137.17481-1-kraxel@redhat.com
Add a new virtio-input device, which connects to a vhost-user
backend.
Instead of reading configuration directly from an input device /
evdev (like virtio-input-host), it reads it over vhost-user protocol
with {SET,GET}_CONFIG messages. The vhost-user-backend handles the
queues & events setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-5-marcandre.lureau@redhat.com
[ kraxel: drop -{non-,}transitional variants ]
[ kraxel: fix "make check" on !linux ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared
buffer between qemu and backend.
Firstly, qemu uses VHOST_USER_GET_INFLIGHT_FD to get the
shared buffer from backend. Then qemu should send it back
through VHOST_USER_SET_INFLIGHT_FD each time we start vhost-user.
This shared buffer is used to track inflight I/O by backend.
Qemu should retrieve a new one when vm reset.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-2-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split vhost_user_read(), so only header can be read with
vhost_user_read_header().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190308140454.32437-8-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190308140454.32437-6-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Take a VhostUserState* that can be pre-allocated, and initialize it
with the associated chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prior to f6deb6d9 "virtio-balloon: Remove unnecessary MADV_WILLNEED on
deflate", the balloon device issued an madvise() MADV_WILLNEED on
pages removed from the balloon. That would hint to the host kernel
that the pages were likely to be needed by the guest in the near
future.
It's unclear if this is actually valuable or not, and so f6deb6d9
removed this, essentially ignoring balloon deflate requests. However,
concerns have been raised that this might cause a performance
regression by causing extra latency for the guest in certain
configurations.
So, until we can get actual benchmark data to see if that's the case,
this restores the old behaviour, issuing a MADV_WILLNEED when a page is
removed from the balloon.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190306030601.21986-4-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes a balloon bug with a nasty consequence - potentially
corrupting guest memory - but which is extremely unlikely to be
triggered in practice.
The balloon always works in 4kiB units, but the host could have a
larger page size on certain platforms. Since ed48c59 "virtio-balloon:
Safely handle BALLOON_PAGE_SIZE < host page size" we've handled this
by accumulating requests to balloon 4kiB subpages until they formed a
full host page. Since f6deb6d "virtio-balloon: Remove unnecessary
MADV_WILLNEED on deflate" we essentially ignore deflate requests.
Suppose we have a host with 8kiB pages, and one host page has subpages
A & B. If we get this sequence of events -
inflate A
deflate A
inflate B
- the current logic will discard the whole host page. That's
incorrect because the guest has deflated subpage A, and could have
written important data to it.
This patch fixes the problem by adjusting our state information about
partially ballooned host pages when deflate requests are received.
Fixes: ed48c59 "virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size"
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190306030601.21986-3-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
ed48c59875 "virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host
page size" introduced a new temporary data structure which tracks 4kiB
chunks which have been inserted into the balloon by the guest but
don't yet form a full host page which we can discard.
Unfortunately, I had a thinko and allocated that structure with
g_malloc0() but freed it with a plain free() rather than g_free().
This corrects the problem.
Fixes: ed48c59875
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190306030601.21986-2-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
The elem could theorically contain both outbuf and inbufs. We move the
free operation to the end of this function to avoid using elem->in_sg
while elem has been freed.
Fixes: c13c4153f7
("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Peter Xu <peterx@redhat.com>
Message-Id: <1552383280-4122-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed when VirtioPCIClass subclasses have their own
class struct with some extra fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-2-kraxel@redhat.com
Instead of hard-coding all config switches in the config file
default-configs/s390x-softmmu.mak, let's use the new Kconfig files
to express the necessary dependencies: The S390_CCW_VIRTIO config switch
for the "s390-ccw-virtio" machine now selects all non-optional devices.
And since we already have the VIRTIO_PCI and VIRTIO_MMIO config switches
for the other two virtio transports, this patch also introduces a new
config switch VIRTIO_CCW for the third, s390x-specific virtio transport,
so that all three virtio transports are now handled in the same way.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-42-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available. However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.
Done mostly with the following script:
while read i; do
i=${i%=y}; i=${i#CONFIG_}
sed -i -e'/^config '$i'$/!b' -en \
-e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \
`grep -lw $i hw/*/Kconfig`
done < default-configs/pci.mak
followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new feature enables the virtio-balloon device to receive hints of
guest free pages from the free page vq.
A notifier is registered to the migration precopy notifier chain. The
notifier calls free_page_start after the migration thread syncs the dirty
bitmap, so that the free page optimization starts to clear bits of free
pages from the bitmap. It calls the free_page_stop before the migration
thread syncs the bitmap, which is the end of the current round of ram
save. The free_page_stop is also called to stop the optimization in the
case when there is an error occurred in the process of ram saving.
Note: balloon will report pages which were free at the time of this call.
As the reporting happens asynchronously, dirty bit logging must be
enabled before this free_page_start call is made. Guest reporting must be
disabled before the migration dirty bitmap is synchronized.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Peter Xu <peterx@redhat.com>
Message-Id: <1544516693-5395-8-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Dropped kernel header update, fixed up CMD_ID_* name change
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
=GzUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-balloon always works in units of 4kiB (BALLOON_PAGE_SIZE), but
we can only actually discard memory in units of the host page size.
Now, we handle this very badly: we silently ignore balloon requests that
aren't host page aligned, and for requests that are host page aligned we
discard the entire host page. The latter can corrupt guest memory if its
page size is smaller than the host's.
The obvious choice would be to disable the balloon if the host page size is
not 4kiB. However, that would break the special case where host and guest
have the same page size, but that's larger than 4kiB. That case currently
works by accident[1] - and is used in practice on many production POWER
systems where 64kiB has long been the Linux default page size on both host
and guest.
To make the balloon safe, without breaking that useful special case, we
need to accumulate 4kiB balloon requests until we have a whole contiguous
host page to discard.
We could in principle do that across all guest memory, but it would require
a large bitmap to track. This patch represents a compromise: we track
ballooned subpages for a single contiguous host page at a time. This means
that if the guest discards all 4kiB chunks of a host page in succession,
we will discard it. This is the expected behaviour in the (host page) ==
(guest page) != 4kiB case we want to support.
If the guest scatters 4kiB requests across different host pages, we don't
discard anything, and issue a warning. Not ideal, but at least we don't
corrupt guest memory as the previous version could.
Warning reporting is kind of a compromise here. Determining whether we're
in a problematic state at realize() time is tricky, because we'd have to
look at the host pagesizes of all memory backends, but we can't really know
if some of those backends could be for special purpose memory that's not
subject to ballooning.
Reporting only when the guest tries to balloon a partial page also isn't
great because if the guest page size happens to line up it won't indicate
that we're in a non ideal situation. It could also cause alarming repeated
warnings whenever a migration is attempted.
So, what we do is warn the first time the guest attempts balloon a partial
host page, whether or not it will end up ballooning the rest of the page
immediately afterwards.
[1] Because when the guest attempts to balloon a page, it will submit
requests for each 4kiB subpage. Most will be ignored, but the one
which happens to be host page aligned will discard the whole lot.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190214043916.22128-6-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to use VirtIOFeature also in other virtio devices, we move
its declaration and the endof() macro (renamed in virtio_endof())
in virtio.h.
We add virtio_feature_get_config_size() function to iterate the array
of VirtIOFeature and to return the config size depending on the
features enabled. (as virtio_net_set_config_size() did)
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-5-sgarzare@redhat.com
Message-Id: <20190221103314.58500-5-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, virtio-balloon uses madvise() with MADV_DONTNEED to actually
discard RAM pages inserted into the balloon. This is basically a Linux
only interface (MADV_DONTNEED exists on some other platforms, but doesn't
always have the same semantics). It also doesn't work on hugepages and has
some other limitations.
It turns out that postcopy also needs to discard chunks of memory, and uses
a better interface for it: ram_block_discard_range(). It doesn't cover
every case, but it covers more than going direct to madvise() and this
gives us a single place to update for more possibilities in future.
There are some subtleties here to maintain the current balloon behaviour:
* For now, we just ignore requests to balloon in a hugepage backed region.
That matches current behaviour, because MADV_DONTNEED on a hugepage would
simply fail, and we ignore the error.
* If host page size is > BALLOON_PAGE_SIZE we can frequently call this on
non-host-page-aligned addresses. These would also fail in madvise(),
which we then ignored. ram_block_discard_range() error_report()s calls
on unaligned addresses, so we explicitly check that case to avoid
spamming the logs.
* We now call ram_block_discard_range() with the *host* page size, whereas
we previously called madvise() with BALLOON_PAGE_SIZE. Surprisingly,
this also matches existing behaviour. Although the kernel fails madvise
on unaligned addresses, it will round unaligned sizes *up* to the host
page size. Yes, this means that if BALLOON_PAGE_SIZE < guest page size
we can incorrectly discard more memory than the guest asked us to. I'm
planning to address that soon.
Errors other than the ones discussed above, will now be reported by
ram_block_discard_range(), rather than silently ignored, which means we
have a much better chance of seeing when something is going wrong.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190214043916.22128-5-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This replaces the balloon_page() internal interface with
ballon_inflate_page(), with a slightly different interface. The new
interface will make future alterations simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190214043916.22128-4-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-balloon device's verification of the address given to it by the
guest has a number of faults:
* The addresses here are guest physical addresses, which should be
'hwaddr' rather than 'ram_addr_t' (the distinction is admittedly
pretty subtle and confusing)
* We don't check for section.mr being NULL, which is the main way that
memory_region_find() reports basic failures. We really need to check
that before looking at any other section fields, because
memory_region_find() doesn't initialize them on the failure path
* We're passing a length of '1' to memory_region_find(), but really the
guest is requesting that we put the entire page into the balloon,
so it makes more sense to call it with BALLOON_PAGE_SIZE
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190214043916.22128-3-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the balloon is inflated, we discard memory place in it using madvise()
with MADV_DONTNEED. And when we deflate it we use MADV_WILLNEED, which
sounds like it makes sense but is actually unnecessary.
The misleadingly named MADV_DONTNEED just discards the memory in question,
it doesn't set any persistent state on it in-kernel; all that's necessary
to bring the memory back is to touch it. MADV_WILLNEED in contrast
specifically says that the memory will be used soon and faults it in.
This patch simplify's the balloon operation by dropping the madvise()
on deflate. This might have an impact on performance - it will move a
delay at deflate time until that memory is actually touched, which
might be more latency sensitive. However:
* Memory that's being given back to the guest by deflating the
balloon *might* be used soon, but it equally could just sit around
in the guest's pools until needed (or even be faulted out again if
the host is under memory pressure).
* Usually, the timescale over which you'll be adjusting the balloon
is long enough that a few extra faults after deflation aren't
going to make a difference.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190214043916.22128-2-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Detect all invalid configurations (e.g. mingw32 with vhost-user,
non-Linux with vhost-kernel). As a collateral benefit, all vhost-kernel
backends can be now disabled if one wants to reduce the attack surface.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-6-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user does not depend on Linux; it can run on any POSIX system. Restrict
vhost-kernel to Linux in hw/virtio/vhost-backend.c, everything else can be
compiled on all POSIX systems.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1550165756-21617-4-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For downstream s390x builds, we'd like to be able to build QEMU with
CONFIG_VIRTIO_PCI disabled (since virtio-ccw is used here instead),
but still with CONFIG_PCI enabled. This currently fails since the
virtio-*-pci.o files are still included in the build, but virtio-pci.o
is missing. Use the right config switch CONFIG_VIRTIO_PCI to exclude
the virtio-*-pci.o files from the build.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use VIRTIO_PCI MACRO instead.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtqueue_pop() and virtqueue_get_avail_bytes() routines can use the
INDIRECT table to get the data. It is possible to create a packet which
will lead to the assert message like:
include/exec/memory.h:1995: void
address_space_read_cached(MemoryRegionCache *, hwaddr, void *, int):
Assertion `addr < cache->len && len <= cache->len - addr' failed.
Aborted
To do it the first descriptor should have a link to the INDIRECT table
and set the size of it to 0. It doesn't look good that the guest should
be able to trigger the assert in qemu. Add additional check for the size
of the INDIRECT table, which should not be 0.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
In virtio_balloon_get_config() we initialize a struct virtio_balloon_config
which we then copy to guest memory. However, the local variable is not
zero initialized. This works OK at the moment because we initialize
all the fields in it; however an upcoming kernel header change will
add some new fields. If we don't zero out the whole struct then we
will start leaking a small amount of the contents of QEMU's stack
to the guest as soon as we update linux-headers/ to a set of headers
that includes the new fields.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190118183603.24757-1-peter.maydell@linaro.org
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio console and qga tests also depend on CONFIG_VIRTIO_SERIAL.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notice that we can't still run tests with it disabled. Both cdrom-test and
drive_del-test use virtio-scsi without checking if it is enabled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For consistency with other devices, rename
virtio_host_{initfn,pci_info} to virtio_input_host_{initfn,info}.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the vhost-user-test assumes the eventfd is available.
However it's not true because the accel is qtest. So the
'vhost_set_vring_file' will not add fds to the msg and the server
side of vhost-user-test will be broken. The bug is in 'ioeventfd_enabled'.
We should make this function return true if not using kvm accel.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many of the current virtio-*-pci device types actually represent
3 different types of devices:
* virtio 1.0 non-transitional devices
* virtio 1.0 transitional devices
* virtio 0.9 ("legacy device" in virtio 1.0 terminology)
That would be just an annoyance if it didn't break our device/bus
compatibility QMP interfaces. With these multi-purpose device
types, there's no way to tell management software that
transitional devices and legacy devices require a Conventional
PCI bus.
The multi-purpose device types would also prevent us from telling
management software what's the PCI vendor/device ID for them,
because their PCI IDs change at runtime depending on the bus
where they were plugged.
This patch adds separate device types for each of those virtio
device flavors:
- virtio-*-pci: the existing multi-purpose device types
- Configurable using `disable-legacy` and `disable-modern`
properties
- Legacy driver support is automatically enabled/disabled
depending on the bus where it is plugged
- Supports Conventional PCI and PCI Express buses
(but Conventional PCI is incompatible with
disable-legacy=off)
- Changes PCI vendor/device IDs at runtime
- virtio-*-pci-transitional: virtio-1.0 device supporting legacy drivers
- Supports Conventional PCI buses only, because
it has a PIO BAR
- virtio-*-pci-non-transitional: modern-only
- Supports both Conventional PCI and PCI Express buses
The existing TYPE_* macros for these types will point to an
abstract base type, so existing casts in the code will keep
working for all variants.
A simple test script (tests/acceptance/virtio_version.py) is
included, to check if the new device types are equivalent to
using the `disable-legacy` and `disable-modern` options.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a helper for registering different flavours of virtio
devices. Convert code to use the helper, but keep only the
existing generic types. Transitional and non-transitional device
types will be added by another patch.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=+od8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging
Trivial patches (2018-12-11)
# gpg: Signature made Tue 11 Dec 2018 18:02:20 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-patches-pull-request: (30 commits)
Fixes i386 xchgq test
maint: Grammar fix to mailmap
MAINTAINERS: Update email address for Fam Zheng
cutils: Assert in-range base for string-to-integer conversions
util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
target: hax: fix errors in comment
MAINTAINERS: Use my work email to review Build and test automation patches
MAINTAINERS: Add a missing entry for the NVDIMM device
MAINTAINERS: Add a missing entry to the QMP section
MAINTAINERS: Add a missing entry to SPICE
MAINTAINERS: Add missing entries for the MPS2 machine
MAINTAINERS: Add missing entries for the Canon DIGIC machine
MAINTAINERS: Add missing entries to the vhost section
MAINTAINERS: Add missing entries to the PC Chipset section
MAINTAINERS: Add a missing entry for the sun4m machines
MAINTAINERS: Add a missing entry for the Old World machines
MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
MAINTAINERS: Add missing entries for the Jazz machine
MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
MAINTAINERS: Add a missing entry to the SPARC CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of accepting any Object*, change user_creatable_complete() to
require a UserCreatable*. Modify the callers to pass the appropriate
argument, removing redundant dynamic cast checks in object creation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-4-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Pass num_sg by value instead of by pointer, as num_sg is never modified in
virtqueue_map_iovec().
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1541139396-4727-1-git-send-email-dongli.zhang@oracle.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
Before, we did not clear callback like handle_output when delete
the virtqueue which may result be segmentfault.
The scene is as follows:
1. Start a vm with multiqueue vhost-net,
2. then we write VIRTIO_PCI_GUEST_FEATURES in PCI configuration to
triger multiqueue disable in this vm which will delete the virtqueue.
In this step, the tx_bh is deleted but the callback virtio_net_handle_tx_bh
still exist.
3. Finally, we write VIRTIO_PCI_QUEUE_NOTIFY in PCI configuration to
notify the deleted virtqueue. In this way, virtio_net_handle_tx_bh
will be called and qemu will be crashed.
Although the way described above is uncommon, we had better reinforce it.
CC: qemu-stable@nongnu.org
Signed-off-by: liujunjie <liujunjie23@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We've got three places already that provide a prototype for this
function in a .c file - that's ugly. Let's provide a proper prototype
in a header instead, with a proper description why this function should
not be used in most cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to documentation, NEED_REPLY_MASK should not be set
for VHOST_USER_SET_MEM_TABLE request in postcopy mode.
This restriction was mistakenly applied to 'reply_supported'
variable, which is local and used only for non-postcopy case.
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: 9bb3801994 ("vhost+postcopy: Send address back to qemu")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181002140947.4107-1-i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
'fd' received from the vhost side is never freed.
Also, everything (including 'postcopy_listen' state) should be
cleaned up on vhost cleanup.
Fixes: 46343570c0 ("vhost+postcopy: Wire up POSTCOPY_END notify")
Fixes: f82c11165f ("vhost+postcopy: Register shared ufd with postcopy")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181008160536.6332-3-i.maximets@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Both virtio-blk and virtio-scsi use virtio_queue_empty() as the
loop condition in VQ handlers (virtio_blk_handle_vq,
virtio_scsi_handle_cmd_vq). When a device is marked broken in
virtqueue_pop, for example if a vIOMMU address translation failed, we
want to break out of the loop.
This fixes a hanging problem when booting a CentOS 3.10.0-862.el7.x86_64
kernel with ATS enabled:
$ qemu-system-x86_64 \
... \
-device intel-iommu,intremap=on,caching-mode=on,eim=on,device-iotlb=on \
-device virtio-scsi-pci,iommu_platform=on,ats=on,id=scsi0,bus=pci.4,addr=0x0
The dead loop happens immediately when the kernel boots and initializes
the device, where virtio_scsi_data_plane_handle_cmd will not return:
> ...
> #13 0x00005586602b7793 in virtio_scsi_handle_cmd_vq
> #14 0x00005586602b8d66 in virtio_scsi_data_plane_handle_cmd
> #15 0x00005586602ddab7 in virtio_queue_notify_aio_vq
> #16 0x00005586602dfc9f in virtio_queue_host_notifier_aio_poll
> #17 0x00005586607885da in run_poll_handlers_once
> #18 0x000055866078880e in try_poll_mode
> #19 0x00005586607888eb in aio_poll
> #20 0x0000558660784561 in aio_wait_bh_oneshot
> #21 0x00005586602b9582 in virtio_scsi_dataplane_stop
> #22 0x00005586605a7110 in virtio_bus_stop_ioeventfd
> #23 0x00005586605a9426 in virtio_pci_stop_ioeventfd
> #24 0x00005586605ab808 in virtio_pci_common_write
> #25 0x0000558660242396 in memory_region_write_accessor
> #26 0x00005586602425ab in access_with_adjusted_size
> #27 0x0000558660245281 in memory_region_dispatch_write
> #28 0x00005586601e008e in flatview_write_continue
> #29 0x00005586601e01d8 in flatview_write
> #30 0x00005586601e04de in address_space_write
> #31 0x00005586601e052f in address_space_rw
> #32 0x00005586602607f2 in kvm_cpu_exec
> #33 0x0000558660227148 in qemu_kvm_cpu_thread_fn
> #34 0x000055866078bde7 in qemu_thread_start
> #35 0x00007f5784906594 in start_thread
> #36 0x00007f5784639e6f in clone
With this patch, virtio_queue_empty will now return 1 as soon as the
vdev is marked as broken, after a "virtio: zero sized buffers are not
allowed" error.
To be consistent, update virtio_queue_empty_rcu as well.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180910145616.8598-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio_queue_get_desc_addr returns 64-bit hwaddr while int is usually 32-bit.
If returned hwaddr is not equal to 0 but least-significant 32 bits are
equal to 0 then this code will not actually stop running queue.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Acked-by: Jia He <hejianet@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because the cache is sized to include the rings and the event indices,
negotiating the VIRTIO_RING_F_EVENT_IDX feature will result in the size
of the cache changing. And because MemoryRegionCache accesses are
range-checked, if we skip this we end up with an assertion failure.
This happens with OpenBSD 6.3.
Reported-by: Fam Zheng <famz@redhat.com>
Fixes: 97cd965c07
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove KVM specific tests in balloon_page(), instead marking
ballooning as inhibited without KVM_CAP_SYNC_MMU support.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Check region type first before casting the memory region
to IOMMUMemoryRegion. Otherwise QEMU will abort with below
error message when casting non-IOMMU memory region:
vhost_iommu_region_add: Object 0x561f28bce4f0 is not an
instance of type qemu:iommu-memory-region
Fixes: cb1efcf462 ("iommu: Add IOMMU index argument to notifier APIs")
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-rng device causes old guest kernels(2.6.32) to hang on latest qemu.
The driver attempts to read from the virtio-rng device too early in it's
initialization. Qemu detects guest is not ready and returns, resulting in
hang.
To fix handle pending requests when guest is running and driver status is
set to 'VIRTIO_CONFIG_S_DRIVER_OK'.
CC: qemu-stable@nongnu.org
Reported-by: Sergio lopez <slopezpa@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for multiple IOMMU indexes to the IOMMU notifier APIs.
When initializing a notifier with iommu_notifier_init(), the caller
must pass the IOMMU index that it is interested in. When a change
happens, the IOMMU implementation must pass
memory_region_notify_iommu() the IOMMU index that has changed and
that notifiers must be called for.
IOMMUs which support only a single index don't need to change.
Callers which only really support working with IOMMUs with a single
index can use the result of passing MEMTXATTRS_UNSPECIFIED to
memory_region_iommu_attrs_to_index().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-3-peter.maydell@linaro.org
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is only half of the work, because the proxy devices (virtio-*-pci,
virtio-*-ccw, etc.) are still included unconditionally. It is still a
move in the right direction.
Based-on: <20180522194943.24871-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove those unneeded includes to speed up the compilation
process a little bit. (Continue 7eceff5b5a cleanup)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-13-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_get_iotlb_entry().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-12-peter.maydell@linaro.org
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER.
With this feature negotiated, vhost-user backend can register
memory region based host notifiers. And it will allow the guest
driver in the VM to notify the hardware accelerator at the
vhost-user backend directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When multi queue is enabled e.g. for a virtio-net device,
each queue pair will have a vhost_dev, and the only thing
shared between vhost devs currently is the chardev. This
patch introduces a vhost-user state structure which will
be shared by all vhost devs of the same virtio device.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD protocol
feature to allow slave to send at most 8 descriptors
in each message to master via ancillary data using the
slave channel.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a vhost op for vhost backends to allow
them to filter the memory sections that they can handle.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The warning is
hw/virtio/vhost-user.c:1319:26: error: suggest braces
around initialization of subobject [-Werror,-Wmissing-braces]
VhostUserMsg msg = { 0 };
^
{}
While the original code is correct, and technically exactly correct
as per ISO C89, both GCC and Clang support plain empty set of braces
as an extension.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use qemu_set_nonblock rather than a simple fcntl; cleaner
and I have no reason to change other flags.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces the support for setting memory region
based host notifiers for virtio device. This is helpful when
using a hardware accelerator for a virtio device, because
hardware heavily depends on the notification, this will allow
the guest driver in the VM to notify the hardware directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add some trace points for IOTLB translation for vhost. After vhost-user
is setup, the only IO path that QEMU will participate should be the
IOMMU translation, so it'll be good we can track this with explicit
timestamps when needed to see how long time we take to do the
translation, and whether there's anything stuck inside. It might be
useful for triaging vhost-user problems.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu should read and report hugetlb page allocation
counts exported in the following kernel patch:
commit 4c3ca37c4a4394978fd0f005625f6064ed2b9a64
Author: Jonathan Helman <jonathan.helman@oracle.com>
Date: Mon Mar 19 11:00:35 2018 -0700
virtio_balloon: export hugetlb page allocation counts
Export the number of successful and failed hugetlb page
allocations via the virtio balloon driver. These 2 counts
come directly from the vm_events HTLB_BUDDY_PGALLOC and
HTLB_BUDDY_PGALLOC_FAIL.
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
When IOMMU is enabled, we store virtqueue metadata as iova (though it
may has _phys suffix) and access them through dma helpers. Any
translation failures could be reported by IOMMU.
In this case, trying to validate iova against gpa won't work and will
cause a false error reporting. So this patch bypasses the ring
verification if IOMMU is enabled which is similar to the behavior
before 0ca1fd2d68 that calls vhost_memory_map() which is a nop when
IOMMU is enabled.
Fixes: 0ca1fd2d68 ("vhost: Simplify ring verification checks")
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
My rework of section adding combines overlapping or adjoining regions,
but checks they're actually the same underlying RAM block.
Fix the case where two blocks adjoin but don't overlap; that new region
should get added (but not combined), but my previous patch was disallowing it.
Fixes: c1ece84e7c
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without a dedicated protocol feature, QEMU cannot know whether
the backend can handle VHOST_USER_SET_CONFIG and
VHOST_USER_GET_CONFIG messages.
This patch adds a protocol feature that is only advertised by
QEMU if the device implements the config ops. Vhost user init
fails if the device support the feature but the backend doesn't.
The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
requests if the protocol feature has been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
As soon as vhost-user init is done, the backend may send
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG, so let's set the
notification callback before it.
Also, it will be used to know whether the device supports
the config feature to advertize it or not.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
Align RAMBlocks to page size alignment, and adjust the merging code
to deal with partial overlap due to that alignment.
This is needed for postcopy so that we can place/fetch whole hugepages
when under userfault.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a call to VHOST_USER_POSTCOPY_END message to the vhost clients
right before we ask the listener thread to shutdown.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This message is sent just before the end of postcopy to get the
client to stop using userfault since we wont respond to any more
requests. It should close userfaultfd so that any other pages
get mapped to the backing file automatically by the kernel, since
at this point we know we've received everything.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Register a waker function in vhost-user code to be notified when
pages arrive or requests to previously mapped pages get requested.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Resolve fault addresses read off the clients UFD into RAMBlock
and offset, and call back to the postcopy code to ask for the page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stash the RAMBlock and offset for later use looking up
addresses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We need a better way, but at the moment we need the address of the
mappings sent back to qemu so it can interpret the messages on the
userfaultfd it reads.
This is done as a 3 stage set:
QEMU -> client
set_mem_table
mmap stuff, get addresses
client -> qemu
here are the addresses
qemu -> client
OK - now you can use them
That ensures that qemu has registered the new addresses in it's
userfault code before the client starts accessing them.
Note: We don't ask for the default 'ack' reply since we've got our own.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split the set_mem_table routines in both qemu and libvhost-user
because the postcopy versions are going to be quite different
once changes in the later patches are added. However, this patch
doesn't produce any functional change, just the split.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Register the UFD that comes in as the response to the 'advise' method
with the postcopy code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.
Later patches will fill in the behaviour/contents of the
message.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a vhost feature flag for postcopy support, and
use the postcopy notifier to check it before allowing postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION
and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side
support crypto operation in cryptodev host-user backend.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Impliment the vhost-crypto's funtions, such as startup,
stop and notification etc. Introduce an enum
QCryptoCryptoDevBackendOptionsType in order to
identify the cryptodev vhost backend is vhost-user
or vhost-kernel-module (If exist).
At this point, the cryptdoev-vhost-user works.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In commit 0ca1fd2d68 ("vhost: Simplify ring verification checks"),
it checks the virtqueue desc mapping for 3 times.
Fixed: commit 0ca1fd2d68 ("vhost: Simplify ring verification checks")
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In our Armv8a server, we try to configure the vhost scsi but fail
to boot up the guest (-machine virt-2.10). The guest's boot failure
is very early, even earlier than grub.
There are 3 virtqueues (ctrl, event and cmd) for virtio scsi device,
but ovmf and seabios will only set the physical address for the 3rd
one (cmd). Then in vhost_virtqueue_start(), virtio_queue_get_desc_addr
will be 0 for ctrl and event vq when qemu negotiates with ovmf. So
vhost_memory_map fails with ENOMEM.
This patch just fixs it by early quitting the virtqueue start/stop
when virtio_queue_get_desc_addr is 0.
Btw, after guest kernel starts, all the 3 queues will be initialized
and set address correctly.
Already tested on Arm64 and X86_64 qemu.
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since used_memslots will be updated to the actual value after
registering memory listener for the first time, move the
memslots limit checking to the right place.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJagxKDAAoJECgfDbjSjVRp5qAH/3gmgBaIzL3KRHd5i0RZifJv
PvyAVYgZd7h0+/1r9GM7guHKyEPZ08JtbHSm/HuDV4BD/Vf3/8joy8roExIfde2A
6k8fd6ANVQmE3t5zUxNXi9qiG4pO4xDIu4cMAbixzgN9x5ttlcfTw7fTT0e0VJxJ
8SN02/uCPPR/DY4/cpjah+slSyv6rBKT1v1ONy7djyRTYHi6h3Meoh05YfEALkwA
goxTKBZHi0L1IZ3HP/ZpXJDohQ5n2P09DX0fQgb8PgmW6WIWB/Qpi5pD53LZpMCV
n9waTF0U0ahneFd2FHo22QMMrwWvQyrjv+w5uXVr+qmHb/OyH2tUt7PgGF9+QKA=
=78s5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,vhost,pci,pc: features, fixes and cleanups
- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
virtio-balloon: include statistics of disk/file caches
acpi-test: update FADT
lpc: drop pcie host dependency
tests: acpi: fix FADT not being compared to reference table
hw/pci-bridge: fix pcie root port's IO hints capability
libvhost-user: Support across-memory-boundary access
libvhost-user: Fix resource leak
virtio-balloon: unref the memory region before continuing
pci: removed the is_express field since a uniform interface was inserted
virtio-blk: enable multiple vectors when using multiple I/O queues
pci/bus: let it has higher migration priority
pci-bridge/i82801b11: clear bridge registers on platform reset
vhost: Move log_dirty check
vhost: Merge and delete unused callbacks
vhost: Clean out old vhost_set_memory and friends
vhost: Regenerate region list from changed sections list
vhost: Merge sections added to temporary list
vhost: Simplify ring verification checks
vhost: Build temporary section list and deref after commit
virtio: improve virtio devices initialization time
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Currently virtio-pci driver hardcoded 2 vectors for virtio-blk device,
for multiple I/O queues scenario, all the I/O queues will share one
interrupt vector, while here, enable multiple vectors according to
the number of I/O queues.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the log_dirty check into vhost_section.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the olf vhost_set_memory code is gone, the _nop and _add
callbacks are identical and can be merged. The _del callback is
no longer needed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the old update mechanism, vhost_set_memory, and the functions
and flags it used.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Compare the sections list that's just been generated, and if it's
different from the old one regenerate the region list.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
As sections are reported by the listener to the _nop and _add
methods, add them to the temporary section list but now merge them
with the previous section if the new one abuts and the backend allows.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_verify_ring_mappings() were used to verify that
rings are still accessible and related memory hasn't
been moved after flatview is updated.
It was doing checks by mapping ring's GPA+len and
checking that HVA hadn't changed with new memory map.
To avoid maybe expensive mapping call, we were
identifying address range that changed and were doing
mapping only if ring was in changed range.
However it's not neccessary to perform ring's GPA
mapping as we already have its current HVA and all
we need is to verify that ring's GPA translates to
the same HVA in updated flatview.
This will allow the following patches to simplify the range
comparison that was previously needed to avoid expensive
verify_ring_mapping calls.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
with modifications by:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor spotted that there's a race, where a region that's unref'd
in a _del callback might be free'd before the set_mem_table call in
the _commit callback, and thus the vhost might end up using free memory.
Fix this by building a complete temporary sections list, ref'ing every
section (during add and nop) and then unref'ing the whole list right
at the end of commit.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The loading time of a VM is quite significant when its virtio
devices use a large amount of virt-queues (e.g. a virtio-serial
device with max_ports=511). Most of the time is spend in the
creation of all the required event notifiers (ioeventfd and memory
regions).
This patch pack all the changes to the memory regions in a
single memory transaction.
Reported-by: Sitong Liu
Reported-by: Xiaoling Gao
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
The virtio_bus_set_host_notifier function no longer calls
event_notifier_cleanup when a event notifier is removed.
The commit updates the code to match the new behavior and calls
virtio_bus_cleanup_host_notifier after the notifier was de-assign
and no longer in use.
This change is a preparation to allow executing the
virtio_bus_set_host_notifier function in a memory region
transaction.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 0750b06021.
Follow up patches are reworking the memory listeners, the new mechanism
will add its own set of traces.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will allow callers to silence error report when the call is
allowed to failed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180201132757.23063-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When unregister memory listeners, we should call, e.g.,
region_del() (and possibly other undo operations) on every existing
memory region sections there, otherwise we may leak resources that are
held during the region_add(). This patch undo the stuff for the
listeners, which emulates the case when the address space is set from
current to an empty state.
I found this problem when debugging a refcount leak issue that leads to
a device unplug event lost (please see the "Bug:" line below). In that
case, the leakage of resource is the PCI BAR memory region refcount.
And since memory regions are not keeping their own refcount but onto
their owners, so the vfio-pci device's (who is the owner of the PCI BAR
memory regions) refcount is leaked, and event missing.
We had encountered similar issues before and fixed in other
way (ee4c112846, "vhost: Release memory references on cleanup"). This
patch can be seen as a more high-level fix of similar problems that are
caused by the resource leaks from memory listeners. So now we can remove
the explicit unref of memory regions since that'll be done altogether
during unregistering of listeners now.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1531393
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180122060244.29368-5-peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trace these operations on two memory listeners. It helps to verify the
new memory listener fix, and good to keep them there.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180122060244.29368-2-peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 4fe6d78b2e as it is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
This reverts commit 6f0bb23072.
This reverts commit f87d72f5c5 as that is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
QEMU will assert on vhost-user backed virtio device hotplug if QEMU is
using more RAM regions than VHOST_MEMORY_MAX_NREGIONS (for example if
it were started with a lot of DIMM devices).
Fix it by returning error instead of asserting and let callers of
vhost_set_mem_table() handle error condition gracefully.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently take a pointer to a misaligned field of a packed structure.
clang reports this as a build warning.
A fix is to keep payload in a separate structure, and access is it
from there using a vectored write.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The loading time of a VM is quite significant when its virtio
devices use a large amount of virt-queues (e.g. a virtio-serial
device with max_ports=511). Most of the time is spend in the
creation of all the required event notifiers (ioeventfd and memory
regions).
This patch pack all the changes to the memory regions in a
single memory transaction.
Reported-by: Sitong Liu <siliu@redhat.com>
Reported-by: Xiaoling Gao <xiagao@redhat.com>
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the EventNotifier's cleanup callback function to execute the
event_notifier_cleanup function after kvm unregistered the eventfd.
This change supports running the virtio_bus_set_host_notifier
function inside a memory region transaction. Otherwise, a closed
fd is sent to kvm, which results in a failure.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a new vhost-user device for block, it uses a
chardev to connect with the backend, same with Qemu virito-blk device,
Guest OS still uses the virtio-blk frontend driver.
To use it, start QEMU with command line like this:
qemu-system-x86_64 \
-chardev socket,id=char0,path=/path/vhost.socket \
-device vhost-user-blk-pci,chardev=char0,num-queues=2, \
bootindex=2... \
Users can use different parameters for `num-queues` and `bootindex`.
Different with exist Qemu virtio-blk host device, it makes more easy
for users to implement their own I/O processing logic, such as all
user space I/O stack against hardware block device. It uses the new
vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config
information from backend process.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be
used for live migration of vhost user devices, also vhost user devices
can benefit from the messages to get/set virtio config space from/to the
I/O target. For the purpose to support virtio config space change,
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier
in case virtio config space change in the slave I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statement being removed doesn't change anything as virtio PCI devices already
have Subsystem Vendor ID set to pci_default_sub_vendor_id (0x1af4), same as Vendor
ID. And the Virtio spec does not require the two to be equal, either:
"The PCI Subsystem Vendor ID and the PCI Subsystem Device ID MAY reflect the PCI
Vendor and Device ID of the environment (for informational purposes by the driver)."
Background:
Following the recent virtio-win licensing change, several vendors are planning to
ship their own certified version of Windows guest Virtio drivers, potentially taking
advantage of Windows Update as a distribution channel. It is therefore critical that
each vendor uses their own PCI Subsystem Vendor ID for Virtio devices to prevent
drivers from other vendors binding to it.
This would be trivially done by adding:
k->subsystem_vendor_id = ...
to virtio_pci_class_init(). Except for the problematic statement deleted by this
patch, which reverts the Subsystem Vendor ID back to 0x1af4 for legacy devices for
no good reason.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Backends don't need to know what frontend requested a reset,
and notifying then from virtio_error is messy because
virtio_error itself might be invoked from backend.
Let's just set the status directly.
Cc: qemu-stable@nongnu.org
Reported-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
A guest could attempt to use an uninitialised VirtQueue object
or unset Vring.align leading to a arithmetic exception. Add check
to avoid it.
Reported-by: Zhangboxian <zhangboxian@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Since commit f1f9e6c5 "vhost: adapt vhost_verify_ring_mappings() to
virtio 1 ring layout", we check the mapping of each part (descriptor
table, available ring and used ring) of each virtqueue separately.
The checking of a part is done by the vhost_verify_ring_part_mapping()
function: it returns either 0 on success or a negative errno if the
part cannot be mapped at the same place.
Unfortunately, the vhost_verify_ring_mappings() function checks its
return value the other way round. It means that we either:
- only verify the descriptor table of the first virtqueue, and if it
is valid we ignore all the other mappings
- or ignore all broken mappings until we reach a valid one
ie, we only raise an error if all mappings are broken, and we consider
all mappings are valid otherwise (false success), which is obviously
wrong.
This patch ensures that vhost_verify_ring_mappings() only returns
success if ALL mappings are okay.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_virtqueue_stop() gets avail index value from the backend,
except if the backend is not responding.
It happens when the backend crashes, and in this case, internal
state of the virtio queue is inconsistent, making packets
to corrupt the vring state.
With a Linux guest, it results in following error message on
backend reconnection:
[ 22.444905] virtio_net virtio0: output.0:id 0 is not a head!
[ 22.446746] net enp0s3: Unexpected TXQ (0) queue failure: -5
[ 22.476360] net enp0s3: Unexpected TXQ (0) queue failure: -5
Fixes: 283e2c2adc ("net: virtio-net discards TX data after link down")
Cc: qemu-stable@nongnu.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case of backend crash, it is not possible to restore internal
avail index from the backend value as vhost_get_vring_base
callback fails.
This patch provides a new interface to restore internal avail index
from the vring used index, as done by some vhost-user backend on
reconnection.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we fail to hotplug virtio-blk device and then suspend
or shutdown VM, qemu is likely to crash.
Re-production steps:
1. Run VM named vm001
2. Create a virtio-blk.xml which contains wrong configurations:
<disk device="lun" rawio="yes" type="block">
<driver cache="none" io="native" name="qemu" type="raw" />
<source dev="/dev/mapper/11-dm" />
<target bus="virtio" dev="vdx" />
</disk>
3. Run command : virsh attach-device vm001 virtio-blk.xml
error: Failed to attach device from blk-scsi.xml
error: internal error: unable to execute QEMU command 'device_add': Please set scsi=off for virtio-blk devices in order to use virtio 1.0
it means hotplug virtio-blk device failed.
4. Suspend or shutdown VM will leads to qemu crash
Problem happens in virtio_vmstate_change which is called by
vm_state_notify:
vdev’s parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash.
virtio_vmstate_change is added to the list vm_change_state_head at virtio_blk_device_realize(virtio_init),
but after hotplug virtio-blk failed, virtio_vmstate_change will not be removed from vm_change_state_head.
Adding unrealize function of virtio-blk device can solve this problem.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The modern bar is accessed now via yet another address space created just
for that purpose and it does not really need FlatView and dispatch tree
as it has a single memory region so it is just a waste of memory. Things
get even worse when there are dozens or hundreds of virtio-pci devices -
since these address spaces are global, changing any of them triggers
rebuilding all address spaces.
This replaces indirect accesses to the modern BAR with a simple lookup
and direct calls to memory_region_dispatch_read/write.
This is expected to save lots of memory at boot time after applying:
[Qemu-devel] [PULL 00/32] Misc changes for 2017-09-22
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While changing the s/g list allocation, commit 3b3b0628
also changed the descriptor counting to count iovec entries
as split by cpu_physical_memory_map(). Previously only the
actual descriptor entries were counted and the split into
the iovec happened afterwards in virtqueue_map().
Count the entries again instead to avoid erroneous
"Looped descriptor" errors.
Reported-by: Hans Middelhoek <h.middelhoek@ospito.nl>
Link: https://forum.proxmox.com/threads/vm-crash-with-memory-hotplug.35904/
Fixes: 3b3b062821 ("virtio: slim down allocation of VirtQueueElements")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:
* vfio-pci (is_express=1, but legacy PCI handled by
vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
virtio_pci_dc_realize(), and additional legacy PCI code at
virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
is conditional on pci_bus_is_express(dev->bus)
* Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
other hybrid devices
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the 'modern_state' part of virtio-pci to modern migration
macros.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_log_put() is called to decomission the dirty log between qemu and
a vhost device when stopping the device. Such a call can happen from
migration_completion().
Present code sets dev->log_size to zero too early in vhost_log_put(),
causing the sync check to always return false. As a consequence, the
last pass on the dirty bitmap never happens at the end of migration.
If a vhost device was busy (writing to guest memory) until the last
moments before vhost_virtqueue_stop(), this error will result in guest
memory corruption (at least) following migrations.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost registers a MemoryListener where it adds and removes references
to MemoryRegions as the MemoryRegionSections pass through. The
region_add callback is invoked for each existing section when the
MemoryListener is registered, but unregistering the MemoryListener
performs no reciprocal region_del callback. It's therefore the
owner of the MemoryListener's responsibility to cleanup any persistent
changes, such as these memory references, after unregistering.
The consequence of this bug is that if we have both a vhost device
and a vfio device, the vhost device will reference any mmap'd MMIO of
the vfio device via this MemoryListener. If the vhost device is then
removed, those references remain outstanding. If we then attempt to
remove the vfio device, it never gets finalized and the only way to
release the kernel file descriptors is to terminate the QEMU process.
Fixes: dfde4e6e1a ("memory: add ref/unref calls")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org # v1.6.0+
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, vhost-user does not implement any means for notifying the
backend about guest endianess. This commit introduces a new message
called VHOST_USER_SET_VRING_ENDIAN which is analogous to the ioctl()
called VHOST_SET_VRING_ENDIAN used for kernel vhost backends. Such
message is necessary for backends supporting legacy (pre-1.0) virtio
devices running in big-endian guests.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
vhost exists a call for g_file_get_contents, but not call g_free.
Signed-off-by: Peng Hao<peng.hao2@zte.com.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unlike other object_property_add_link() occurrences in virtio devices,
virtio-crypto checks the "in use" state of the linked backend object in
addition to qdev_prop_allow_set_link_before_realize. To convert it
without needing to specialize DEFINE_PROP_LINK which always uses the
qdev callback, move the "in use" check to device realize time.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-10-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
link's check callback is supposed to verify/permit setting it,
however currently nothing restricts it from misusing it
and modifying target object from within.
Make sure that readonly semantics are checked by compiler
to prevent callback's misuse.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the backend sends a request just before closing the socket,
the aio dispatcher might schedule its reading after the vhost
device has been cleaned, leading to a NULL pointer dereference
in slave_read();
vhost_user_cleanup() already closes the socket but it is not
enough, the handler has to be unregistered.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a crash that happens when vhost-user iommu
support is enabled and vhost-user socket is closed.
When it happens, if an IOTLB invalidation notification is sent
by the IOMMU, vhost_ops's NULL pointer is dereferenced.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Old kvm.ko versions only supported a tiny number of ioeventfds so
virtio-pci avoids ioeventfds when kvm_has_many_ioeventfds() returns 0.
Do not check kvm_has_many_ioeventfds() when KVM is disabled since it
always returns 0. Since commit 8c56c1a592
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.
This patch makes -device virtio-blk-pci,iothread=iothread0 work even
when KVM is disabled.
I have tested that virtio-blk-pci works under TCG both with and without
iothread.
This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-7-stefanha@redhat.com
Message-id: 20170615163813.7255-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.
To use it, start Qemu with a command line equivalent to:
qemu-system-x86_64 \
-chardev socket,id=vus0,path=/tmp/vus.sock \
-device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...
A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>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=5eL6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into staging
# gpg: Signature made Fri 02 Jun 2017 20:12:48 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chrfe-pull-request:
char: move char devices to chardev/
char: make chr_fe_deinit() optionaly delete backend
char: rename functions that are not part of fe
char: move CharBackend handling in char-fe unit
char: generalize qemu_chr_write_all()
be-hci: use backend functions
chardev: serial & parallel declaration to own headers
chardev: move headers to include/chardev
Remove/replace sysemu/char.h inclusion
char-win: close file handle except with console
char-win: rename hcom->file
char-win: rename win_chr_init/poll win_chr_serial_init/poll
char-win: remove WinChardev.len
char-win: simplify win_chr_read()
char: cast ARRAY_SIZE() as signed to silent warning on empty array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch specifies and implements the master/slave communication
to support device IOTLB in slave.
The vhost_iotlb_msg structure introduced for kernel backends is
re-used, making the design close between the two backends.
An exception is the use of the secondary channel to enable the
slave to send IOTLB miss requests to the master.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Learn to give a socket to the slave to let him make requests to the
master.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add more fields to the structure
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch reworks IOTLB messaging to prepare for vhost-user
device IOTLB support.
IOTLB messages handling is extracted from vhost-kernel backend,
so that only the messages transport remains backend specifics.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some backends might want to know when things went wrong.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This tracepoint can help diagnosing failures due to memory
fragmentation in the guest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
process_message_reply() was recently updated to get full message
content instead of only its request field.
There is no need to copy all the struct content into the stack,
so just pass its pointer as const.
Reviewed-by: Jens Freimann <jfreiman@redhat.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This files don't use any function from migration.h, so drop it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
According to section 2.1.2 of the virtio-1 specification:
"The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that
a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET,
the device MUST send a device configuration change notification to the
driver."
Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken"
introduced a virtio_error() call that just does that:
- internally mark the device as broken
- set the DEVICE_NEEDS_RESET bit in the status
- send a configuration change notification
Unfortunately, virtio_notify_vector(), called by virtio_notify_config(),
returns right away when the device is marked as broken and the notification
isn't sent in this case.
The spec doesn't say whether a broken device can send notifications
in other situations or not. But since the driver isn't supposed to do
anything but to reset the device, it makes sense to keep the check in
virtio_notify_config().
Marking the device as broken AFTER the configuration change notification was
sent is enough to fix the issue.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Qemu2.7~2.9 and vhost user for dpdk 17.02 release work together
to cause failures of new connection when negotiating to set MQ.
(one queue pair works well).
Because there exist some bugs in qemu code when introducing
VHOST_USER_PROTOCOL_F_REPLY_ACK to qemu. When vhost_user_set_mem_table
is invoked to deal with the vhost message VHOST_USER_SET_MEM_TABLE
for the second time, qemu indeed doesn't send the messge (The message
needs to be sent only once)but still will be waiting for dpdk's reply
ack, then, qemu is always freezing, while DPDK is always waiting for
next vhost message from qemu.
The patch aims to fix the bug, MQ can work well.
The same bug is found in function vhost_user_net_set_mtu, it is fixed
at the same time.
DPDK related patch is as following:
http://www.dpdk.org/dev/patchwork/patch/23955/
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Cc: qemu-stable@nongnu.org
Fixes: ca525ce561 ("vhost-user: Introduce a new protocol feature REPLY_ACK.")
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jens Freimann <jfreiman@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EsZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' into staging
migration/next for 20170421
# gpg: Signature made Fri 21 Apr 2017 11:28:13 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we modify the virtio-rng virqueue while the
vmstate is already migrated we can have some
inconsistencies between the virtqueue state and
the memory content.
To avoid this, stop the virtqueue while the CPU
is stopped.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In this patch, IOMMUNotifier.{start|end} are introduced to store section
information for a specific notifier. When notification occurs, we not
only check the notification type (MAP|UNMAP), but also check whether the
notified iova range overlaps with the range of specific IOMMU notifier,
and skip those notifiers if not in the listened range.
When removing an region, we need to make sure we removed the correct
VFIOGuestIOMMU by checking the IOMMUNotifier.start address as well.
This patch is solving the problem that vfio-pci devices receive
duplicated UNMAP notification on x86 platform when vIOMMU is there. The
issue is that x86 IOMMU has a (0, 2^64-1) IOMMU region, which is
splitted by the (0xfee00000, 0xfeefffff) IRQ region. AFAIK
this (splitted IOMMU region) is only happening on x86.
This patch also helps vhost to leverage the new interface as well, so
that vhost won't get duplicated cache flushes. In that sense, it's an
slight performance improvement.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-2-git-send-email-peterx@redhat.com>
[ehabkost: included extra vhost_iommu_region_del() change from Peter Xu]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We assumes the iommu_ops were attached to the root region of address
space. This may not be true for all kinds of IOMMU implementation and
especially after commit 3716d5902d ("pci: introduce a bus master
container"). So fix this by not assuming as->root has iommu_ops,
instead depending on the regions reported by memory listener through:
- register a memory listener to dma_as
- during region_add, if it's a region of IOMMU, register a specific
IOMMU notifier, and store all notifiers in a list.
- during region_del, compare and delete the IOMMU notifier from the list
This is also a must for making vhost device IOTLB works for all types
of IOMMUs. Note, since we register one notifier during each
.region_add, the IOTLB may be flushed more than one times, this is
suboptimal and could be optimized in the future.
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fixes: 3716d5902d ("pci: introduce a bus master container")
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Commit ad07cd6 ("virtio-scsi: always use dataplane path if ioeventfd is
active", 2016-10-30) and 9ffe337 ("virtio-blk: always use dataplane
path if ioeventfd is active", 2016-10-30) broke the virtio 1.0
indirect access registers.
The indirect access registers bypass the ioeventfd, so that virtio-blk
and virtio-scsi now repeatedly try to initialize dataplane instead of
triggering the guest->host EventNotifier. Detect the situation by
checking vq->handle_aio_output; if it is not NULL, trigger the
EventNotifier, which is how the device expects to get notifications
and in fact the only thread-safe manner to deliver them.
Fixes: ad07cd6
Fixes: 9ffe337
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
For one thing we shouldn't continue if an error happened, for the other
two steps failing can cause an abort() in error_setg because we reuse
the same errp blindly.
Add error handling checks to fix both issues.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Make Power Management State flag writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make several Link Control Register flags writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the virtio devices are PCI Express, make error-enabling flags
writable to respect the PCIe spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't reset proxy->vqs[].{num|desc[]|avail[]|used[]}. This means if
a driver enable the vq without setting vq address after reset. The old
addresses were leaked. Fixing this by resetting modern vq meta data
during device reset.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit
96a8821d21. Previous patch is a better
solution which does not require a strict order between virtio and IOMMU.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We don't check the return value of address_space_cache_init(), this
may lead buggy driver use incorrect region caches. Instead of
triggering an assert, catch and warn this early in
virtio_init_region_cache().
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't destroy region cache during reset which can make the maps
of previous driver leaked to a buggy or malicious driver that don't
set vring address before starting to use the device. Fix this by
destroy the region cache during reset and validate it before trying to
see them.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid access stale memory region cache after reset, this patch
check the existence of virtqueue pfn for all exported virtqueue access
helpers before trying to use them.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit c611c76417 ("virtio: add MemoryListener to cache ring
translations") registers a memory listener to dma_as. This may not
work when IOMMU is enabled: dma_as(bus_master_as) were initialized in
pcibus_machine_done() after virtio_realize(). This will cause a
segfault. Fixing this by using pci_device_iommu_address_space()
instead to make sure address space were initialized at this time.
With this fix, IOMMU device were required to be initialized before any
virtio-pci devices.
Fixes: c611c76417 ("virtio: add MemoryListener to cache ring translations")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 97cd965c07 ("virtio: use
VRingMemoryRegionCaches for avail and used rings") switched to a memory
region cache to avoid repeated map/unmap operations.
The virtio_load() process is a little tricky because vring addresses are
serialized in two separate places. VIRTIO 1.0 devices serialize desc
and then a subsection with used and avail. Legacy devices only
serialize desc.
Live migration of VIRTIO 1.0 devices fails on the destination host with:
VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0
Failed to load virtio-blk:virtio
error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk'
This happens because the memory region cache is only initialized after
desc is loaded and not after the used and avail subsection is loaded.
If the guest chose memory addresses that don't match the legacy ring
layout then the wrong guest memory location is accessed.
Wait until all ring addresses are known before trying to initialize the
region cache. Also clarify the incomplete comment about VIRTIO-1 ring
address subsection.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Remember to invalidate the avail event field so the memory pages are
marked dirty.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Switching to vring caches exposed an existing bug in
virtio_queue_set_notification(): We can't access vring structures
if they have not been set up yet. This may happen, for example,
for virtio-blk devices with multiple queues: The code will try to
switch notifiers for every queue, but the guest may have only set up
a subset of them.
Fix this by guarding access to the vring memory by checking for
vring.desc. The first aio poll will iron out any remaining
inconsistencies for later-configured queues (buggy legacy drivers).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, there is nothing in the virtqueue.
virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in
this case; we have to filter it out just like virtio_queue_notify_aio_vq.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For ARM virt machine, if we use virt-2.7 which will not create ITS node,
the virtio-net can not recieve interrupts so it can't get ip address
through dhcp.
This fixes commit 83d768b(virtio: set ISR on dataplane notifications).
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-net change is necessary because it uses virtqueue_fill
and virtqueue_flush instead of the more convenient virtqueue_push.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, it is not necessary for vring_used_idx
to do anything (as is already the case when the caller is virtio_load).
This is harmless for now, but it will be a problem when the
MemoryRegionCache has not been set up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached translations are RCU-protected to allow efficient use
when processing virtqueues.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now, the cache is created on every virtqueue_pop. Later on,
direct descriptors will be able to reuse it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This makes little difference, but it makes the code change smaller
for the next patch that introduces MemoryRegionCache. This is
because map/unmap are similar to MemoryRegionCache init/destroy.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio_queue_host_notifier_aio_poll, not all "!virtio_queue_empty()"
cases are making true progress.
Currently the offending one is virtio-scsi event queue, whose handler
does nothing if no event is pending. As a result aio_poll() will spin on
the "non-empty" VQ and take 100% host CPU.
Fix this by reporting actual progress from virtio queue aio handlers.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost does not support RO protections on memory at the moment - adding
ROMs would mean that e.g. a buggy guest might change them in-memory - a
condition from which guest reset does not recover. Not nice.
We also definitely don't want to try logging writes into ROMs -
in particular guests set very high addresses for ROM BARs
so logging these writes would waste a lot of memory.
Maybe ROMs could be supported with the iotlb variant -
not sure, but there seems to be no good reason for virtio
to try to do DMA from ROM. So let's just skip ROM memory.
Suggested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
msix_init() reports errors with error_report(), which is wrong when
it's used in realize(). The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.
For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.
Bonus: add comment for msix_init.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fzmu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170120-v2' into staging
First set of s390x patches for 2.9:
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
# gpg: Signature made Fri 20 Jan 2017 09:11:58 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170120-v2:
virtio-ccw: fix ring sizing
s390x/pci: merge msix init functions
s390x/pci: handle PCIBridge bus number
s390x/pci: use hashtable to look up zpci via fh
s390x/pci: PCI multibus bridge handling
s390x/pci: optimize calling s390_get_phb()
s390x/pci: change the device array to a list
s390x/pci: dynamically allocate iommu
s390x/pci: make S390PCIIOMMU inherit Object
s390x/kvm: use kvm_gsi_routing_enabled in flic
s390x: add compat machine for 2.9
s390x: remove double compat statement
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current code seems to assume ring size is
always decreased but this is not required by spec:
what spec says is just that size can not exceed
the maximum. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We allow vhost to clear VIRITO_F_IOMMU_PLATFORM which is wrong since
VIRTIO_F_IOMMU_PLATFORM is mandatory for security. Fixing this by
enforce it after vdc->get_features().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity reports that ARRAY_SIZE(elem->out_sg) (and all the others too)
is wrong because elem->out_sg is a pointer.
However, the check is not in the right place and the max_size argument
of virtqueue_map_iovec can be removed. The check on in_num/out_num
should be moved to qemu_get_virtqueue_element instead, before the call
to virtqueue_alloc_element.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 3724650db0 ("virtio: introduce virtqueue_alloc_element")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
virtio core has code to revert queue number
to maximum on reset. Drop TODO to add that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patches implements Device IOTLB support for vhost kernel. This is
done through:
1) switch to use dma helpers when map/unmap vrings from vhost codes
2) introduce a set of VhostOps to:
- setting up device IOTLB request callback
- processing device IOTLB request
- processing device IOTLB invalidation
2) kernel support for Device IOTLB API:
- allow vhost-net to query the IOMMU IOTLB entry through eventfd
- enable the ability for qemu to update a specified mapping of vhost
- through ioctl.
- enable the ability to invalidate a specified range of iova for the
device IOTLB of vhost through ioctl. In x86/intel_iommu case this is
triggered through iommu memory region notifier from device IOTLB
invalidation descriptor processing routine.
With all the above, kernel vhost_net can co-operate with userspace
IOMMU. For vhost-user, the support could be easily done on top by
implementing the VhostOps.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While AioContext is in polling mode virtqueue notifications are not
necessary. Some device virtqueue handlers enable notifications. Make
sure they stay disabled to avoid unnecessary vmexits.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit aff8fd18f1.
Both virtio-net and virtio-crypto do not balance
virtio_queue_set_notification() enable and disable calls. This makes
the notifications_disabled counter unreliable and Doug Goldstein
reported the following assertion failure:
#3 0x00007ffff44d1c62 in __GI___assert_fail (
assertion=assertion@entry=0x555555ae8e8a "vq->notification_disabled > 0",
file=file@entry=0x555555ae89c0 "/home/doug/work/qemu/hw/virtio/virtio.c",
line=line@entry=215,
function=function@entry=0x555555ae9630 <__PRETTY_FUNCTION__.43707>
"virtio_queue_set_notification") at assert.c:101
#4 0x00005555557f25d6 in virtio_queue_set_notification (vq=0x55555666aa90,
enable=enable@entry=1) at /home/doug/work/qemu/hw/virtio/virtio.c:215
#5 0x00005555557dc311 in virtio_net_has_buffers (q=<optimized out>,
q=<optimized out>, bufsize=102)
at /home/doug/work/qemu/hw/net/virtio-net.c:1008
#6 virtio_net_receive (nc=<optimized out>, buf=0x555557386b88 "", size=102)
at /home/doug/work/qemu/hw/net/virtio-net.c:1148
#7 0x00005555559cad33 in nc_sendv_compat (flags=<optimized out>, iovcnt=1,
iov=0x7fffead746d0, nc=0x55555788b340) at net/net.c:705
#8 qemu_deliver_packet_iov (sender=<optimized out>, flags=<optimized out>,
iov=0x7fffead746d0, iovcnt=1, opaque=0x55555788b340) at net/net.c:732
#9 0x00005555559cd929 in qemu_net_queue_deliver (size=<optimized out>,
data=<optimized out>, flags=<optimized out>, sender=<optimized out>,
queue=0x55555788b550) at net/queue.c:164
#10 qemu_net_queue_flush (queue=0x55555788b550) at net/queue.c:261
This patch is safe to revert since it's just an optimization for
virtqueue polling. The next patch will improve the situation again
without resorting to nesting.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net-pci does not enable ioeventfd for historical reasons (and
nobody ever checked whether it should be revisited). Note that other
backends do enable ioeventfd for virtio-net.
However, it has a major effect on performance. On Windows, throughput is
_multiplied_ by 2 or 3 on TCP_STREAM (on small packets it is "only" a 30%
improvement) and a little less so on TCP_MAERTS albeit still very much
statistically significant. Latency also has a single digit improvement.
This is not visible when using vhost, which forces ioeventfd=on, but it
is substantial without vhost. In addition, also on Windows and with the
RHEL 7.3 kernel, APICv seems to slow down virtio-net performance a bit,
but the penalty with this patch goes from -25% to -7%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the useless is_external argument. Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it. This lets us remove stubs/iohandler.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements VHOST_USER_PROTOCOL_F_NET_MTU
protocol feature and VHOST_USER_NET_SET_MTU request so
that the backend gets notified of the user defined host
MTU.
If backend supports VHOST_USER_PROTOCOL_F_REPLY_ACK,
QEMU assumes MTU is valid if success is returned.
Vhost-net driver sends this request through a new
vhost_net_set_mtu vhost_ops entry.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add procedure for fast drop of queued packets, acting like
pop and push without mapping the buffers into memory.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio queue suitable for push operation from qemu
after vhost was stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bring virtio queue to correct internal state for host-to-guest
operations when vhost is temporary stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A broken guest can specify physical addresses that correspond
to any memory region, but it shouldn't be able to change ROM.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Correct recalculation of vq->inuse after migration for the corner case
where the avail_idx has already wrapped but used_idx not yet.
Also change the type of the VirtQueue.inuse to unsigned int. This is
done to be consistent with other members representing sizes (VRing.num),
and because C99 guarantees max ring size < UINT_MAX but does not
guarantee max ring size < INT_MAX.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: bccdef6b ("virtio: recalculate vq->inuse after migration")
CC: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Common practice with sensitive information (key material, passwords,
etc). Prevents sensitive information from being exposed by accident later in
coredumps, memory disclosure bugs when heap memory is reused, etc.
Sensitive information is sometimes also held in mlocked pages to prevent
it being swapped to disk but that's not being done here.
Let's zeroize the memory of CryptoDevBackendSymOpInfo structure pointed
for key material security.
[Thanks to Stefan for help with crafting the commit message]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After resolving the relationship with cryptodev backend,
the virtio crypto device supports hotplug now.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the check condition for cryptodev device in order
to avoid one cryptodev device is used by multiple
virtio crypto devices.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must assure each virtio crypto pci device has
an vaild cryptodev backend object.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ready flag should be set by the children of
cryptodev backend interface. Warp the setter/getter
functions for it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property is used to Tag the cryptodev backend
is used by virtio-crypto or not. Making cryptodev
can't be hot unplugged when it's in use. Cleanup
resources when cryptodev is finalized.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In some modes of cipher algorithms, the length of destination data
maybe larger then source data, such as ciphertext stealing (CTS).
For symmetric algorithms, the length of ciphertext is definitly
equal to the plaintext for each crypto operation. So we should
use the src_len instead of dst_len avoid to pass the incorrect
cryptographical results to the frontend driver.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches enable the Address Translation Service support for virtio
pci devices. This is needed for a guest visible Device IOTLB
implementation and will be required by vhost device IOTLB API
implementation for intel IOMMU.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, all virtio devices bypass IOMMU completely. This is because
address_space_memory is assumed and used during DMA emulation. This
patch converts the virtio core API to use DMA API. This idea is
- introducing a new transport specific helper to query the dma address
space. (only pci version is implemented).
- query and use this address space during virtio device guest memory
accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled
for this device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because the 'size_t' type is 4 bytes in 32-bit platform, which
is the same with 'int'. It's easy to make 'max_len' to zero when
integer overflow and then cause heap overflow if 'max_len' is zero.
Using uint_64 instead of size_t to avoid the integer overflow.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYVFkHAAoJECgfDbjSjVRpdc0H/1JMgQn0/J6vjKfeRY7720y8
/Bihf4gjKN2bPtu6pTGY1KQBvK76ShyvZZBFCa5bf8a4V9HP4BgSQ8mQ7ZUURzJJ
OslYbSzK1R2LiWJ40e9xdFOoKWKB3lK1lBF/Xb8QPZPoJ0D50Fo2xpymt4hZFdkF
oSnXxHmYoKMsMmmqJZd3aaqyffFLYGmcm1dbJOxninwu/nBzOBY2SQmmaaacSoGn
3D5988i6OcD1qbavfk4rNCQV4avJA+H7c/FmXH3WarPE8M9/jgnAaUDdknFicUA8
hGwMsLrO/7sMnMYtSQIxWg743LhrAm93HCr2u/TgLzhYbPydmLCpup5eAWj+jvo=
=nN2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: avoid using guest_notifier_mask in vhost-user mode
pci: fix error message for express slots
i386: amd_iommu: fix MMIO register count and access
tests/vhost-user-bridge: use contrib/libvhost-user
contrib: add libvhost-user
tests/vhost-user-bridge: do not accept more than one connection
tests/vhost-user-bridge: indicate peer disconnected
tests/vhost-user-bridge: remove unnecessary dispatcher_remove
tests/vhost-user-bridge: remove false comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a performance optimization to eliminate vmexits during polling.
It also avoids spurious ioeventfd processing after polling ends.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Polling should disable virtqueue notifications but that requires nested
virtio_queue_set_notification() calls. Turn vq->notification into a
counter so it is possible to do nesting.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an AioContext poll handler to detect new virtqueue buffers without
waiting for a guest->host notification.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because guest mask notifier cannot be used in vhost-user mode, a boolean
flag "use_guest_notifier_mask" was added in commit 5669655aaf to disable
the use of guest mask notifier under virtio-pci. However this flag wasn't
checked in other virtio devices, such as virtio-mmio. In our tests, it
caused assertion error under "vhost-user + virtio-mmio". This patch
addresses this problem by adding a check before guest_notifier_mask is
called.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a cross-version migration regression introduced
by commit d1b4259f ("virtio-bus: Plug devices after features are
negotiated").
The problem is encountered when host's vhost backend does not support
VIRTIO_F_VERSION_1, and migration is initiated from a v2.7 or prior
machine with virtio-pci modern capabilities enabled to a v2.8 machine.
In this case, modern capabilities get exposed to the guest by the source,
whereas the target will detect version 1 is not supported so will only
expose legacy capabilities.
The problem is fixed by introducing a new "x-ignore-backend-features"
property, which is set in v2.7 and prior compatibility modes. Doing this,
v2.7 machine keeps its broken behaviour (enabling modern while version
is not supported), and newer machines will behave correctly.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-id: 20161214163035.3297-1-maxime.coquelin@redhat.com
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Though crypto_cfg.reserve is an unused field, let me
initialize the structure in order to make coverity happy.
*** CID 1365923: Uninitialized variables (UNINIT)
/hw/virtio/virtio-crypto.c: 851 in virtio_crypto_get_config()
845 stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h);
846 stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo);
847 stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
848 stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
849 stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
850
>>> CID 1365923: Uninitialized variables (UNINIT)
>>> Using uninitialized value "crypto_cfg". Field "crypto_cfg.reserve"
is uninitialized when calling "memcpy".
[Note: The source code implementation of the function
has been overridden by a builtin model.]
851 memcpy(config, &crypto_cfg, c->config_size);
852 }
853
Rported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised. This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.
Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation. If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster. Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.
The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM. The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.
The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR. The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent refactoring of virtio notifiers [1], more specifically
the patch ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to
start/stop ioeventfd") that uses virtio_bus_set_host_notifier [2]
by default, core virtio code requires 'ioeventfd_started' to be set
to true/false when the host notifiers are configured.
When vhost is stopped and started, however, there is a stop followed by
another start. Since ioeventfd_started was never set to true, the 'stop'
operation triggered by virtio_bus_set_host_notifier() will not result
in a call to virtio_pci_ioeventfd_assign(assign=false). This leaves
the memory regions with stale notifiers and results on the next start
triggering the following assertion:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
Aborted
This patch reintroduces (hopefully in a cleaner way) the concept
that was present with ioeventfd_disabled before the refactoring.
When ioeventfd_grabbed>0, ioeventfd_started tracks whether ioeventfd
should be enabled or not, but ioeventfd is actually not started at
all until vhost releases the host notifiers.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07748.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07760.html
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to start/stop ioeventfd")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must check for new virtqueue buffers after re-enabling notifications.
This prevents the race condition where the guest added buffers just
after we stopped popping the virtqueue but before we re-enabled
notifications.
I think the virtio-crypto code was based on virtio-net but this crucial
detail was missed. virtio-net does not have the race condition because
it processes the virtqueue one more time after re-enabling
notifications.
Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
These are not used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The legacy vring layout is not used anymore as we use the separate
mappings even for legacy devices.
This patch simply removes it.
This also fixes a bug with virtio 1 devices when the vring descriptor table
is mapped at a higher address than the used vring because the following
function may return an insanely great value:
hwaddr virtio_queue_get_ring_size(VirtIODevice *vdev, int n)
{
return vdev->vq[n].vring.used - vdev->vq[n].vring.desc +
virtio_queue_get_used_size(vdev, n);
}
and the mapping fails.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With virtio 1, the vring layout is split in 3 separate regions of
contiguous memory for the descriptor table, the available ring and the
used ring, as opposed with legacy virtio which uses a single region.
In case of memory re-mapping, the code ensures it doesn't affect the
vring mapping. This is done in vhost_verify_ring_mappings() which assumes
the device is legacy.
This patch changes vhost_verify_ring_mappings() to check the mappings of
each part of the vring separately.
This works for legacy mappings as well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 31190ed7 added a migration blocker in vhost_dev_init() to
check if memfd would succeed. It is better if this blocker first
checks if vhost backend requires shared log. This will avoid a
situation where a blocker is added inappropriately (e.g. shared
log allocation fails when vhost backend doesn't support it).
Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently the virtio-crypto device hasn't supported
hotpluggable and live migration well. Let's tag it
as not hotpluggable and migration actively and reopen
them once we support them well.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function does not fully initialize the returned VirtQueueElement and should
be used only internally from the virtio module.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make crypto operations are executed asynchronously,
so that other QEMU threads and monitor couldn't
be blocked at the virtqueue handling context.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use an opaque point to the VirtIOCryptoReq which
can support different packets based on different
algorithms.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduces VirtIOCryptoReq structure to store
crypto request so that we can easily support
asynchronous crypto operation in the future.
At present, we only support cipher and algorithm
chaining.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Realize the symmetric algorithm control queue handler,
including plain cipher and chainning algorithms.
Currently the control queue is used to create and
close session for symmetric algorithm.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the capacity of algorithms supported by
virtio crypto device to the frontend driver using
pci configuration space.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds virtio-crypto-pci, which is the pci proxy for the virtio
crypto device.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the virtio crypto realization, I'll
finish the core code in the following patches. The
thoughts came from virtio net realization.
For more information see:
http://qemu-project.org/Features/VirtioCrypto
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is only called from virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the three possible parameter combinations for
virtio_queue_set_host_notifier_fd_handler:
- assign=true/set_handler=true is only called from
virtio_device_start_ioeventfd
- assign=false/set_handler=false is called from
set_host_notifier_internal but it only does something when
reached from virtio_device_stop_ioeventfd_impl; otherwise
there is no EventNotifier set on qemu_get_aio_context().
- assign=true/set_handler=false is called from
set_host_notifier_internal, but it is not doing anything:
with the new start_ioeventfd and stop_ioeventfd methods,
there is never an EventNotifier set on qemu_get_aio_context()
at this point. This is enforced by the assertion in
virtio_bus_set_host_notifier.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioeventfd_disabled was the only reason for the default
implementation of virtio_device_start_ioeventfd not to use
virtio_bus_set_host_notifier. This is now fixed, and the sole entry
point to set up ioeventfd can be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that there is not anymore a switch from the generic ioeventfd handler
to the dataplane handler, virtio_bus_set_host_notifier(assign=true) is
always called with !bus->ioeventfd_started, hence virtio_bus_stop_ioeventfd
does nothing in this case. Move the invocation to vhost.c, which is the
only place that needs it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_device_start_ioeventfd_impl use the same logic as
dataplane to set up the host notifier. This removes the need
for the set_handler argument in set_host_notifier_internal.
This is a first step towards using virtio_bus_set_host_notifier
as the sole entry point to set up ioeventfds. At least now
the functions have the same interface, but they still differ
in that virtio_bus_set_host_notifier sets ioeventfd_disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 872dd82c83.
virtio_add_queue_aio is unused.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow customization of the start and stop of ioeventfd. This will
allow direct start of dataplane without passing through the default
ioeventfd handlers, which in turn allows using the dataplane logic
instead of virtio_add_queue_aio. It will also enable some code
simplification, because the sole entry point to ioeventfd setup
will be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback. The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore. It was the only backend to do
so, and if desired this behavior should be implemented in
virtio-bus.c.
Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid "tricking" virtio-blk-dataplane into thinking that ioeventfd will be
available when it is not. This bug has always been there, but it will break
TCG+ioeventfd=on once the dataplane code will be always used when ioeventfd=on.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the load/save with a vmsd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a vmsd pointer for VirtIO devices to use instead of the
load/save methods.
We'll eventually kill off the load/save methods.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.
Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.
The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.
Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset. Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The trace points for hw/virtio/virtio-balloon.c were mistakenly put
in the top level trace-events file, instead of util/trace-events in
commit 270ab88f7c
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Jun 16 09:39:57 2016 +0100
trace: split out trace events for hw/virtio/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop processing the vring if virtqueue_get_head() fetches an
out-of-bounds head index.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the avail ring index is bogus virtqueue_num_heads() must return
-EINVAL.
The only caller is virtqueue_get_avail_bytes(). Return saying no bytes
are available when virtqueue_num_heads() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Stop processing the vring if an avail ring index is invalid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The virtio code uses int, unsigned int, and uint16_t for virtqueue
indices. The uint16_t is used for the low-level descriptor layout in
virtio_ring.h while code that isn't concerned with descriptor layout can
use unsigned int.
Use of int is problematic because it can result in signed/unsigned
comparison and incompatible int*/unsigned int* pointer types.
Make the virtqueue_get_avail_bytes() 'i' variable unsigned int. This
eliminates the need to introduce casts and modify code further in the
patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the vring is invalid, tell the caller no bytes are available and mark
the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Errors can occur during virtqueue_pop(), especially in
virtqueue_map_desc(). In order to handle this we must unmap iov[]
before returning NULL. The caller will consider the virtqueue empty and
the virtio_error() call will have marked the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Send a subsection if the vdev->broken flag is set. This allows live
migration of broken virtio devices.
The subsection is only sent if vdev->broken has been set. In most cases
the flag will be clear and no subsection will be sent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
QEMU prints an error message and exits when the device enters an invalid
state. Terminating the process is heavy-handed. The guest may still be
able to function even if there is a bug in a virtio guest driver.
Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.
If the broken flag is set, do not process virtqueues or write back used
descriptors. The broken flag can be cleared again by resetting the
device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix a single occurrence of a tab character in a file that otherwise uses
spaces for indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
virtio back end uses set of buffers to facilitate I/O operations.
If its size is too large, 'cpu_physical_memory_map' could return
a null address. This would result in a null dereference while
un-mapping descriptors. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
!legacy && !modern is shorter than !(legacy || modern).
I also perfer this (less ()s) as a matter of taste.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set vring call fd unconditionally even if guest driver does
not use MSIX for this vritqueue at all. This will cause lots of
unnecessary userspace access and other checks for drivers does not use
interrupt at all (e.g virtio-net pmd). So check and clean vring call
fd if guest does not use any vector for this virtqueue at
all.
Perf diffs (on rx) shows lots of cpus wasted on vhost_signal() were saved:
#
28.12% -27.82% [vhost] [k] vhost_signal
14.44% -1.69% [kernel.vmlinux] [k] copy_user_generic_string
7.05% +1.53% [kernel.vmlinux] [k] __free_page_frag
6.51% +5.53% [vhost] [k] vhost_get_vq_desc
...
Pktgen tests shows 15.8% improvement on rx pps and 6.5% on tx pps.
Before: RX 2.08Mpps TX 1.35Mpps
After: RX 2.41Mpps TX 1.44Mpps
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without presuming if we got there because of a user mistake or some
more subtle bug in the tooling, it really does not make sense to
implement a non-functional device.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statistics virtqueue is not migrated properly because virtio-balloon
does not include s->stats_vq_elem in the migration stream.
After migration the statistics virtqueue hangs because the host never
completes the last element (s->stats_vq_elem is NULL on the destination
QEMU). Therefore the guest never submits new elements and the virtqueue
is hung.
Instead of changing the migration stream format in an incompatible way,
detect the migration case and rewind the virtqueue so the last element
can be completed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The one pending element is being freed but not discarded on device
reset, which causes svq->inuse to creep up, eventually hitting the
"Virtqueue size exceeded" error.
Properly discarding the element on device reset makes sure that its
buffers are unmapped and the inuse counter stays balanced.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
event_notifier_init() can fail in real life, for example when there
are not enough open file handles available (EMFILE) when using a lot
of devices. So instead of leaving the average user with a cryptic
error number only, print out a proper error message with strerror()
instead, so that the user has a better way to figure out what is
going on and that using "ulimit -n" might help here for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 28ed5ef163.
I still think it's the right thing to do, but
tests have been failing sporadically.
Revert for now, and hope to fix it before the release.
Cc: Prerna Saxena <prerna.saxena@nutanix.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <mlureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1471268075-3425-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The set_mem_table command currently does not seek a reply. Hence, there is
no easy way for a remote application to notify to QEMU when it finished
setting up memory, or if there were errors doing so.
As an example:
(1) Qemu sends a SET_MEM_TABLE to the backend (eg, a vhost-user net
application). SET_MEM_TABLE does not require a reply according to the spec.
(2) Qemu commits the memory to the guest.
(3) Guest issues an I/O operation over a new memory region which was configured on (1).
(4) The application has not yet remapped the memory, but it sees the I/O request.
(5) The application cannot satisfy the request because it does not know about those GPAs.
While a guaranteed fix would require a protocol extension (committed separately),
a best-effort workaround for existing applications is to send a GET_FEATURES
message before completing the vhost_user_set_mem_table() call.
Since GET_FEATURES requires a reply, an application that processes vhost-user
messages synchronously would probably have completed the SET_MEM_TABLE before replying.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces the VHOST_USER_PROTOCOL_F_REPLY_ACK.
If negotiated, client applications should send a u64 payload in
response to any message that contains the "need_reply" bit set
on the message flags. Setting the payload to "zero" indicates the
command finished successfully. Likewise, setting it to "non-zero"
indicates an error.
Currently implemented only for SET_MEM_TABLE.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmslFAAoJECgfDbjSjVRpev0IAMZghEuSeKMB2JR88dErS8P5
J6y/1W2VFuRa1YBkTz/ecr5r2RwIO5teZUZpUkibM65Zo6bu1liMo6gbzeCg/xOi
k437pNRl6W9RVWuXQM9VOegNoGYhX3Hrnu3iQeiT8KRY3OMCwG52umUXYVodJh1R
mlozlEcSyUEDZVdNjhRECuUiw8RRcErEtiKda+zjkf4tPAGkyCItVpLYshE6A2/I
lfQLkv+EWOyuD4cfEHl+4F9K9wegothFTSd/xBmcqqaWRc+pboMVF2A2yga+GjKm
Xgb8SzQYkt9Q1nFr9fz89q89CsjhmfrD/ct/vJAcCFnw/dNXnC6mYjr6MDX0Gd0=
=26Uu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: cleanups, fixes
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 29 Jul 2016 04:11:01 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (41 commits)
mptsas: Fix a migration compatible issue
vhost: do not update last avail idx on get_vring_base() failure
vhost: add vhost_net_set_backend()
vhost-user: add error report in vhost_user_write()
tests: fix vhost-user-test leak
tests: plug some leaks in virtio-net-test
vhost-user: wait until backend init is completed
char: add and use tcp_chr_wait_connected
char: add chr_wait_connected callback
vhost: add assert() to check runtime behaviour
vhost-net: vhost_migration_done is vhost-user specific
Revert "vhost-net: do not crash if backend is not present"
vhost-user: add get_vhost_net() assertions
vhost-user: keep vhost_net after a disconnection
vhost-user: check vhost_user_{read,write}() return value
vhost-user: check qemu_chr_fe_set_msgfds() return value
vhost-user: call set_msgfds unconditionally
qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected
vhost: use error_report() instead of fprintf(stderr,...)
vhost: add missing VHOST_OPS_DEBUG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The state.num value will probably be 0 in this case, but that
doesn't make sense to update.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not all vhost-user backends support ops->vhost_net_set_backend(). It is
a nicer to provide an assert/error than to crash trying to
call. Furthermore, it improves a bit the code by hiding vhost_ops
details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar to vhost_user_read() error report, it is useful to have early
error report.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these functions must be called only after the backend is connected.
They are called from virtio-net.c, after either virtio or link status
change.
The check for nc->peer->link_down should ensure vhost_net_{start,stop}()
are always called between vhost_user_{start,stop}().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user code is quite inconsistent with error handling. Instead
of ignoring some return values of read/write and silently going on with
invalid state (invalid read for example), break the code flow when the
error happened.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check qemu_chr_fe_set_msgfds() for errors, to make sure the message to
be sent is correct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is fine to call set_msgfds() with 0 fd, and ensures any previous fd
array is cleared.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's use qemu proper error reporting API, this ensures the error is
reported at the right place (stderr or monitor), with a conventional
format.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing VHOST_OPS_DEBUG() logs, for completeness.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calling a vhost operation may fail, for example with disconnected
vhost-user backend, but qemu shouldn't abort in this case.
Log an error instead, except on error and cleanup code paths where it
can be mostly ignored.
Let's use a VHOST_OPS_DEBUG macro to easily disable those messages once
disconnected backend stabilizes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_net_init() calls vhost_dev_init() and in case of failure, calls
vhost_dev_cleanup() directly. However, the structure is already
partially cleaned on error. Calling vhost_dev_cleanup() again will call
vhost_virtqueue_cleanup() on already clean queues, and causing potential
double-close. Instead, adjust dev->nvqs and simplify vhost_dev_init()
code to not call vhost_virtqueue_cleanup() but vhost_dev_cleanup()
instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is called on multiple code path, so make it safe to call several
times (note: I don't remember a reproducer here, but a function called
'cleanup' should probably be idempotent in my book)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If vhost_dev_init() failed, caller may still call vhost_dev_cleanup()
later. However, vhost_dev_cleanup() tries to remove the device from the
list even if it wasn't yet added, which may lead to crashes. Similarly
for the memory listener.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure the log was released on cleanup, or it will leak (the
alternative is to call vhost_log_put() unconditionally, but it may hide
some dev state issues).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although not strictly required, it is nice to have vhost_log_put()
safely callable multiple times.
Clear dev->log* when calling vhost_log_put() to make the function
idempotent. This also simplifies a bit the caller work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-dev opaque isn't necessarily an fd, it can be a chardev when using
vhost-user. Goto fail, so vhost_backend_cleanup() is called to handle
backend cleanup appropriately.
vhost_set_backend_type() should never fail, use an assert().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio back end uses set of buffers to facilitate I/O operations.
An infinite loop unfolds in virtqueue_pop() if a buffer was
of zero size. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Enable transitional virtio devices by default.
Enable virtio-1.0 for devices plugged into
PCIe ports (Root ports or Downstream ports).
Using the virtio-1 mode will remove the limitation
of the number of devices that can be attached to a machine
by removing the need for the IO BAR.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A broken or malicious guest can submit more requests than the virtqueue
size permits, causing unbounded memory allocation in QEMU.
The guest can submit requests without bothering to wait for completion
and is therefore not bound by virtqueue size. This requires reusing
vring descriptors in more than one request, which is not allowed by the
VIRTIO 1.0 specification.
In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification
says:
1. The driver places the buffer into free descriptor(s) in the
descriptor table, chaining as necessary
and
Note that the above code does not take precautions against the
available ring buffer wrapping around: this is not possible since the
ring buffer is the same size as the descriptor table, so step (1) will
prevent such a condition.
This implies that placing more buffers into the virtqueue than the
descriptor table size is not allowed.
QEMU is missing the check to prevent this case. Processing a request
allocates a VirtQueueElement leading to unbounded memory allocation
controlled by the guest.
Exit with an error if the guest provides more requests than the
virtqueue size permits. This bounds memory allocation and makes the
buggy guest visible to the user.
This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360
Marvel Team, China.
Reported-by: Zhenhao Hong <hongzhenhao@360.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Forcibly convert it to a vmstate wrapper; proper conversion
comes later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Forcibly convert it to a vmstate wrapper; proper conversion
comes later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To make conversion of virtio devices to VMState simple
at first add a helper function for the simple virtio_save
case and a helper macro that defines the VMState structure.
These will probably go away or change as more of the virtio
code gets converted.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using this function instead of virtio_add_queue marks the vq as aio
based. This differentiation will be useful in later patches.
Distinguish between virtqueue processing in the iohandler context and main loop
AioContext. iohandler context is isolated from AioContexts and therefore does
not run during aio_poll().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The function pointer signature has been repeated a few times, using a
typedef may make coding easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
In the past, we are doing gsi route commit for each irqchip route
update. This is not efficient if we are updating lots of routes in the
same time. This patch removes the committing phase in
kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all
routes updated.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route
into the vector number. Vector index provides more information than the
MSIMessage, we can retrieve the MSIMessage using the vector easily. This
will avoid fetching MSIMessage every time before adding MSI routes.
Meanwhile, the vector info will be used in the coming patches to further
enable gsi route update notifications.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment the following QEMU command line triggers an assertion
failure (minimal reproducer by Cole):
qemu-system-aarch64 \
-machine virt-2.6,accel=tcg \
-nodefaults \
-no-user-config \
-nographic -monitor stdio \
-device virtio-scsi-device,id=scsi0 \
-device virtio-scsi-device,id=scsi1 \
-drive file=foo.img,format=raw,if=none,id=d0 \
-device scsi-hd,bus=scsi0.0,drive=d0 \
-drive file=foo.img,format=raw,if=none,id=d1 \
-device scsi-hd,bus=scsi1.0,drive=d1
qemu-system-aarch64: migration/savevm.c:615:
vmstate_register_with_alias_id:
Assertion `!se->compat || se->instance_id == 0' failed.
The reason is that the vmstate sections for the two scsi-hd devices are
not uniquely identifiable by name.
The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 --
support the BusClass.get_dev_path member function. scsibus_get_dev_path()
formats a device path prefix with the help of its topologically parent
bus, and then appends the chan🆔lun triplet to it. For both scsi-hd
devices, this triplet is 0:0:0.
(Here we use "device path" in the QEMU migration sense, for vmstate
section identification, not in the OFW or UEFI device path senses.)
The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by
the internal VirtIOMMIOProxy device). This bus class
(TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function,
the virtio_bus_get_dev_path() method from its parent class
(TYPE_VIRTIO_BUS).
virtio_bus_get_dev_path() does not format any kind of device address on
its own; "virtio addresses" are transport-specific. Therefore
virtio_bus_get_dev_path() asks the topologically parent bus of the proxy
object (implementing the specific virtio transport) to format the address
of the proxy object.
(For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy,
plugged into a PCI bus), this ends up in pcibus_get_dev_path().)
However, VirtIOMMIOProxy is usually (in practice: always) plugged into
"main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass
does not support formatting QEMU vmstate device paths at all (as
SysBusDevice objects can have zero or more IO ports and zero or more MMIO
regions). Hence the formatting request delegated from
virtio_bus_get_dev_path() gets answered with NULL.
The end result is that the two scsi-hd devices end up with the same device
path "0:0:0", which triggers the assert.
We can solve this by recognizing that virtio-mmio transports are
distinguished from each other by their base addresses in MMIO address
space. Implement virtio_mmio_bus_get_dev_path() as follows:
(1) The virtio device whose devpath is to be formatted resides on a
virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask
the parent bus of VirtIOMMIOProxy to format the device path of
VirtIOMMIOProxy, as a path prefix. (This is identical to what
virtio_bus_get_dev_path() does.)
(2) Append the base address of VirtIOMMIOProxy to the device path, such
as:
- virtio-mmio@000000000a003e00,
- virtio-mmio@000000000a003c00.
Given that these device paths are placed in the migration stream, step (2)
above, if done unconditionally, would break migration. So make that step
conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7
machine types and later.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Kevin Zhao <kevin.zhao@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Tom Hanson <thomas.hanson@linaro.org>
Reported-by: Kevin Zhao <kevin.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/1594239
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
virtio migrates the low 32 feature bits twice, the first copy is there
for compatibility but ever since
019a3edbb25f1571e876f8af1ce4c55412939e5d: ("virtio: make features 64bit
wide") it's ignored on load. This is wrong since virtio_net_load tests
self announcement and guest offloads before the second copy including
high feature bits is loaded. This means that self announcement, control
vq and guest offloads are all broken after migration.
Fix it up by loading low feature bits: somewhat ugly since high and low
bits become out of sync temporarily, but seems unavoidable for
compatibility. The right thing to do for new features is probably to
test the host features, anyway.
Fixes: 019a3edbb2
("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The host notifier rework tried both to unify host notifiers across
transports and plug a possible hole during host notifier
re-assignment. Unfortunately, this meant a change in semantics that
breaks vhost and iSCSI+dataplane.
As the minimal fix, keep the common host notifier code but revert
to the old semantics so that we have time to figure out the proper
fix.
Fixes: 6798e245a3 ("virtio-bus: common ioeventfd infrastructure")
Reported-by: Peter Lieven <pl@kamp.de>
Reported-by: Jason Wang <jasowang@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Tested-by: Peter Lieven <pl@kamp.de>
All users have been converted to the new ioevent callbacks.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert to the new interface.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert to new interface.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Have vhost and dataplane use the new api for transports that
have been converted.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a set of ioeventfd callbacks on the virtio-bus level
that can be implemented by the individual transports. At the
virtio-bus level, do common handling for host notifiers (which
is actually most of it).
Two things of note:
- When setting the host notifier, we only switch from/to the
generic ioeventfd handler. This fixes a latent bug where we
had no ioeventfd assigned for a certain window.
- We always iterate over all possible virtio queues, even though
ccw (currently) has a lower limit. It does not really matter
here.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi
Michael Roth
Michael S. Tsirkin
Pan Nengyuan
Marc-André Lureau
Dr. David Alan Gilbert
Peter Maydell
Jason Wang
Eugenio Pérez
Wei Xu
Sergio Lopez
Eric Auger
Julia Suvorova
Laurent Vivier
Markus Armbruster
Tony Nguyen
David Hildenbrand
Pankaj Gupta
Xie Yongji
Li Hangjing
Jie Wang
Philippe Mathieu-Daudé
Boxuan Li
David Gibson
Daniel P. Berrangé
Gerd Hoffmann
Wei Wang
Thomas Huth
Yang Zhong
Paolo Bonzini
Stefano Garzarella
Li Qiang
Dima Stepanov
Juan Quintela
Eduardo Habkost
Dongli Zhang
liujunjie
Ilya Maximets
Fam Zheng
Yury Kotov
Peter Xu
Alex Williamson
Tiwei Bie
Philippe Mathieu-Daudé
Richard Henderson
Jonathan Helman
Maxime Coquelin
Gonglei
Jia He
Jay Zhou
Greg Kurz
Tomáš Golembiovský
Changpeng Liu
Gal Hammer
Ladi Prosek
Prasad J Pandit
linzhecheng
Alexey Kardashevskiy
Wolfgang Bumiller
Felipe Franciosi
Eric Blake
Alistair Francis
Peng Hao
Vladimir Sementsov-Ogievskiy
Igor Mammedov
Mao Zhongyi
Zhiyong Yang
Marcel Apfelbaum
Cornelia Huck
Cao jin
Stefan Weil
Ashijeet Acharya
Jianjun Duan
Yuri Benditovich
Halil Pasic
Wei Huang
Rafael David Tinoco
Liang Li
Chen Fan
Greg Kurz
Prerna Saxena
Laszlo Ersek