The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware
with patches to support AmigaOS and is very similar to pegasos2 so can
be easily emulated sharing most code with pegasos2. The reason to
emulate it is that AmigaOS comes in different versions for AmigaOne
and PegasosII which only have drivers for one machine and firmware so
these only run on the specific machine. Adding this board allows
another AmigaOS version to be used reusing already existing peagasos2
emulation. (The AmigaOne was the first of these boards so likely most
widespread which then inspired Pegasos that was later replaced with
PegasosII due to problems with Articia S, so these have a lot of
similarity. Pegasos mainly ran MorphOS while the PegasosII version of
AmigaOS was added later and therefore less common than the AmigaOne
version.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we moved the arm default CONFIGs into Kconfig and removed them
from default.mak, we made it harder to identify which CONFIGs are
selected by default in case users want to disable them.
Bring back the default entries into default.mak, but keep them
commented out. This way users can keep their workflows of editing
default.mak to remove build options without needing to search through
Kconfig.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230523180525.29994-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all the CONFIG_FOO=y from default.mak into "default y if TCG"
statements in Kconfig. That way they won't be selected when
CONFIG_TCG=n.
I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to
keep the two default.mak files not empty and keep aarch64-default.mak
including arm-default.mak. That way we don't surprise anyone that's
used to altering these files.
With this change we can start building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-12-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.
Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.
The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I introduced spurious files on my tree during a rebase:
commit ebfc578715
Author: Zhenzhong Duan <zhenzhong.duan@intel.com>
Date: Mon Oct 17 15:53:51 2022 +0800
multifd: Fix flush of zero copy page send request
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To make things worse, it appears like Zhenzhong is the one to blame.
for(int i=0; i < 1000000; i++) {
printf("I will not do rebases when I am tired\n");
}
Sorry, Juan.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
-----BEGIN PGP SIGNATURE-----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=oXX+
-----END PGP SIGNATURE-----
Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging
MIPS patches queue
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
scripts/git.orderfile: Display MAINTAINERS changes first
target/mips: Restrict 'qapi-commands-machine.h' to system emulation
hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
hw/pci-host/bonito: Convert to 3-phase reset
softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
hw/intc: Extract the IRQ counting functions into a separate file
hw/intc/i8259: Make using the isa_pic singleton more type-safe
hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
hw/pci/pci_host: Trace config accesses on unexisting functions
mips: Always include nanomips disassembler
mips: Remove support for trap and emulate KVM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tracking dependencies via Kconfig seems much cleaner.
Note that PIIX4 already depends on ACPI_PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230109172347.1830-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per the comment in the Malta board, the [0x0000.0000-0x2000.0000]
range is decoded by the GT64120, so move the "empty_slot" there.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Olimex makes a series of low-cost STM32 boards. This commit introduces
the minimum setup to support SMT32-H405. See [1] for details
[1] https://www.olimex.com/Products/ARM/ST/STM32-H405/
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221230145733.200496-3-balbi@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all ACPI controllers select the ACPI and APM dependencies
themselves, these explicit dependencies became redundant. Remove them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221216130355.41667-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221022150508.26830-27-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The IDE function is closely tied to the ISA function (e.g. the IDE
interrupt routing happens there), so it makes sense that the IDE
function is instantiated within the south bridge itself.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Gives users more fine-grained control over what should be compiled into
QEMU.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This
platform allows for a convenient CI platform for toolchain, software
ports and the OpenRISC linux kernel port.
Much of this has been sourced from the m68k and riscv virt platforms.
The platform provides:
- OpenRISC SMP with up to 4 cpus
- A virtio bus with up to 8 devices
- Standard ns16550a serial
- Goldfish RTC
- SiFive TEST device for poweroff and reboot
- Generated Device Tree to automatically configure the guest kernel
Signed-off-by: Stafford Horne <shorne@gmail.com>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DINO refers to the GSC-PCI bridge device which will soon be handled separately,
however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated
by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU
MAINTAINERS file.
Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO
and also update the machine description accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add new CONFIG_SGX for sgx support in the Qemu, and the Kconfig
default enable sgx in the i386 platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-32-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci
hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on.
This brings in support for whole lot of subsystems that some targets like
mips does not need. They are added just to satisfy symbol dependencies. This
is ugly and should be avoided. Targets should be able to pull in just what they
need and no more. For example, mips only needs support for PIIX4 and does not
need acpi pci hotplug support or cpu hotplug support or memory hotplug support
etc. This change is an effort to clean this up.
In this change, new config variables are added for various acpi hotplug
subsystems. Targets like mips can only enable PIIX4 support and not the rest
of all the other modules which were being previously pulled in as a part of
CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but
are not required by mips (for example, symbols specific to pci hotplug etc)
are available to satisfy the dependencies.
Currently, this change only addresses issues with mips malta targets. In future
we might be able to clean up other targets which are similarly pulling in lot
of unnecessary hotplug modules by enabling ACPI_X86.
This change should also address issues such as the following:
https://gitlab.com/qemu-project/qemu/-/issues/221https://gitlab.com/qemu-project/qemu/-/issues/193
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210812071409.492299-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because commit f4063f9c31 ("meson: Introduce target-specific
Kconfig") ended being merged after commit 582079c9d2
("hw/tricore: Add testdevice for tests in tests/tcg/"), we
inadvertently added a symbol clash causing the build not to include
the testboard needed for check-tcg.
Fixes: f4063f9c31 ("meson: Introduce target-specific Kconfig")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210720114057.32053-2-alex.bennee@linaro.org>
[PMD: Updated description mentioning commits merged]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 7abb479c7a ("PPC: E500: Add FSL I2C controller and integrate
RTC with it") added a global dependency on the DS1338 model, instead
of a machine one (via Kconfig). This gives trouble when building
standalone machines not exposing I2C bus:
The following clauses were found for DS1338
CONFIG_DS1338=y
config DS1338 depends on I2C
Fix by selecting the DS1338 symbol in the single machine requiring
it, the E500.
Fixes: 7abb479c7a ("PPC: E500: Add FSL I2C controller and integrate RTC with it")
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210513163858.3928976-9-philmd@redhat.com>
Boston is built around a Xilinx FPGA, which includes a PCIe root port
and an UART. An Intel EG20T PCH connects the I/O peripherals, but only
the SATA bus is emulated.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Burton <pburton@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190311005618.19007-6-philmd@redhat.com>
While the default config works well enough it does end up enabling a
lot of stuff. For more minimal builds we can select a different list
of devices and let Kconfig work out what we want. For example:
../../configure --without-default-features \
--target-list=arm-softmmu,aarch64-softmmu \
--with-devices-aarch64=minimal
will override the aarch64-softmmu default set of devices with a more
minimal set of devices that just enables the virt and sbsa-ref models.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-6-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for offering variation to our build configurations lets
move everything and rename it to default. Common included base configs
are also renamed.
During the cleanup the stale usb.mak and pci.mak references were
removed from MAINTAINERS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-5-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
