On the AST2500 SoC, the FMC controller flash type is fixed to SPI for
CE0 and CE1 and 4BYTE mode is autodetected for CE0.
On the AST2400 SoC, the FMC controller flash type and 4BYTE mode are
strapped with register SCU70. We use the default settings from the
palmetto-bmc machine for now.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the routines prototype to use a 'AspeedSMCFlash *' instead of
'AspeedSMCState *'. The result will help in making future changes
clearer.
Also change aspeed_smc_update_cs() which uselessly loops on all slave
devices to update their status.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead, we can simply set the irq level when unselecting the slave
devices. This change prepares ground for a subsequent cleanup of the
aspeed_smc_update_cs() routine which uselessly loops on all slaves to
update their status.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1483979087-32663-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is useless as reset will be called later on.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com>
Message-id: 1483979087-32663-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DBGVCR_EL2 system register is needed to run a 32-bit
EL1 guest under a Linux EL2 64-bit hypervisor. Its only
purpose is to provide AArch64 with access to the state of
the DBGVCR AArch32 register. Since we only have a dummy
DBGVCR, implement a corresponding dummy DBGVCR32_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
To run a VM in 32-bit EL1 our AArch32 interrupt handling code
needs to be able to cope with VIRQ and VFIQ exceptions.
These behave like IRQ and FIQ except that we don't need to try
to route them to Monitor mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
n25q00 and mt25q01 devices share the same JEDEC ID. The difference
between those two devices is number of dies and one bit in extended
JEDEC bytes. This commit adds proper entry for both devices by
introduction the number of dies and and new 25q00 entries.
Signed-off-by: Marcin Krzeminski <mar.krzeminski@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20170108083854.5006-4-mar.krzeminski@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modern big flash NOR devices consist of more than one die.
Some of them do not support chip erase and instead have a die
erase command that can erase one die only. This commit adds
support for defining the number of dies in the chip, and adds
support for die erase command.
The NOR flash model is not strict, so no option to
disable chip erase has been added.
Signed-off-by: Marcin Krzeminski <mar.krzeminski@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20170108083854.5006-3-mar.krzeminski@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some flash chips have additional page program opcode that
takes only 4 byte address. This commit adds support
for such command in Qemu.
Signed-off-by: Marcin Krzeminski <mar.krzeminski@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20170108083854.5006-2-mar.krzeminski@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The imx25 chip provides 3 i2c buses, but they have all been named
"i2c", which makes it difficult to predict which bus a device will
be connected to when specified on the command line.
This patch addresses the issue by naming the buses uniquely:
i2c-bus.0 i2c-bus.1 i2c-bus.2
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Message-id: 20170105043430.3176-2-alastair@au1.ibm.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current code seems to assume ring size is
always decreased but this is not required by spec:
what spec says is just that size can not exceed
the maximum. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently there're two functions, s390_pci_setup_msix() and
s390_pci_msix_init(), for msix initialization, and being called once
for each zpci device plugging. Let's integrate them.
Moreover msix is mandatory in s390 architecture. So we ensure the pci
device being plugged supports msix. For vfio (which is the only tested
setup so far), nothing changes.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The PCI bus number is usually set by the host during the enumeration.
In the s390 architecture we neither get a Device Tree nor have an
enumeration understanding bridge devices.
Let's fake the enumeration on reset and set the PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS and PCI_SUBORDINATE_BUS config entries for the
bridges.
Let's add the configuration of these three config entries on bridge hot
plug.
The bus number is calculated based on a new entry, bus_num of the
S390pciState device.
This commit is inspired by what spapr pci does.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
After PCI multibus is supported, more than 32 PCI devices could be
plugged. The current implementation of s390_pci_find_dev_by_fh()
appears low performance if there's a huge number of PCI devices
plugged. Therefore we introduce a hashtable using idx as key to store
zpci device's pointer on account of translating fh to idx very easily.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When the hotplug handler detects a PCI bridge, the secondary bus has
been initialized by the core PCI code. We give the secondary bus the
bridge name and associate to it the IOMMU handling and
hotplug/hotunplug callbacks.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A function may recursively call device search functions or may call
serveral different device search function. Passing the S390pciState to
search functions as an argument instead of looking up it inside the
search functions lowers the number of calling s390_get_phb().
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In order to support a greater number of devices we use a QTAILQ
list of devices instead of a limited array.
This leads us to change:
- every lookup function s390_pci_find_xxx() for QTAILQ
- the FH_MASK_INDEX to index up to 65536 devices
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When initializing a PCI device, an address space is required during PCI
core initialization and before the call to the embedding object hotplug
callback. To provide this AS, we allocate a S390PCIIOMMU object
containing this AS. Initialization of S390PCIIOMMU object is done
before the PCI device is completely created. So that we cannot
associate the IOMMU with the device at the moment. To track the IOMMU
object, we use g_hash functions with the PCI device's bus address as a
key to provide an array of pointers indexed by the PCI device's devfn
to the allocated IOMMU.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently S390PCIIOMMU is a normal struct. Let's make it inherit Object
in order to take advantage of QOM. In addition, we move some stuff
related to IOMMU from S390PCIBusDevice to S390PCIIOMMU.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's use kvm_gsi_routing_enabled() to check if kvm supports
KVM_CAP_IRQ_ROUTING in order to avoid a needless ioctl invocation.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We chain our compat handler via the CCW_COMPAT macros and via the
class_init function. (e.g. ccw_machine_2_7_class_options calls
ccw_machine_2_8_class_options). As all class_init functions in that
chain call SET_MACHINE_COMPAT for their compat settings, and
SET_MACHINE_COMPAT will append there is no need to do that again.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Commit 091a6b2ac fixed most of the memory leaks in failure
paths in net_init_tap() reported by Coverity (CID 1356216),
but missed one. Fix it by deferring the allocation of
fds and vhost_fds until after the error check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
object_property_set_bool(OBJECT(dev), true, "realized", &err) in
pci_nic_init_nofail may release the object if device fails to
initialize which leads to use-after-free in error handling block.
qdev_init_nofail does the same thing while holding the reference.
(gdb) run -net nic
qemu-system-x86_64: failed to find romfile "efi-e1000.rom"
Program received signal SIGSEGV, Segmentation fault.
object_unparent (obj=0x7fffe96a0010) at qom/object.c:440
440 in qom/object.c
(gdb) bt
<nd_table>, rootbus=0x5555567ed990, default_model=<optimized out>,
default_devaddr=<optimized out>) at hw/pci/pci.c:1812
pci_bus=0x5555567ed990) at hw/i386/pc.c:1634
pci_type=0x555555c1a523 "i440FX", host_type=0x555555ba564e
"i440FX-pcihost") at hw/i386/pc_piix.c:241
out>, envp=<optimized out>) at vl.c:4481
Signed-off-by: Alex Kompel <barbos@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The dp8393x has several 32-bit values which are formed by concatenating
two 16 bit device register values. Attempting to do these inline
with ((s->reg[HI] << 16) | s->reg[LO]) can result in an unintended
sign extension because "x << 16" is of type 'int' even though s->reg
is unsigned, and so if the expression is used in a context where
it is cast to uint64_t the value is incorrectly sign-extended.
Fix this by using accessor functions with a uint32_t return type;
this also makes the code a bit easier to read.
This should fix Coverity issues 1307765, 1307766, 1307767, 1307768.
(To avoid having a ctda read function only used in a DPRINTF,
we move the DPRINTF down slightly so it can use the ttda function.)
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When running qemu-system-m68k with the "-net" parameter (for example
simply "-net nic -net user"), there is currently a confusing warning
message saying:
Warning: requested NIC (anonymous, model mcf_fec) was not created
(not supported by this machine?)
This seems to happen because the MCF NIC has never been adapted to
the currently expected QEMU device behavior. Thus let's QOMify the
NIC now to get rid of the warning message.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Very simple loop optimization with a significant performance impact.
Microbenchmark results, modern x86-64:
buffer size | speed up
------------+---------
1500 | 1.7x
64 | 1.5x
8 | 1.15x
Microbenchmark results, POWER7:
buffer size | speed up
------------+---------
1500 | 5x
64 | 3.3x
8 | 1.13x
There is a lot of room for further improvement at the expense of
code complexity - aligned multibyte reads, LE/BE considerations,
architecture-specific optimizations, etc. This patch still keeps
things simple and readable.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Say it in another way to make it easier to understand.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This reverts commit 7ad9339e37.
The error "Failed to execute helper program (No such file or directory)"
is due to broken glib installation, missing windows gspawn helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170104205722.26492-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-add the MacOSX/Darwin support:
Use the Intel HAX is kernel-based hardware acceleration module
(similar to KVM on Linux).
Based on the original "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com> from emu-2.2-release branch in
the external/qemu-android repository.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <81b85c3032da902e73e77302af508b4b1a7c0ead.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That's a forward port of the core HAX interface code from the
emu-2.2-release branch in the external/qemu-android repository as used by
the Android emulator.
The original commit was "target/i386: Add Intel HAX to android emulator"
saying:
"""
Backport of 2b3098ff27bab079caab9b46b58546b5036f5c0c
from studio-1.4-dev into emu-master-dev
Intel HAX (harware acceleration) will enhance android emulator performance
in Windows and Mac OS X in the systems powered by Intel processors with
"Intel Hardware Accelerated Execution Manager" package installed when
user runs android emulator with Intel target.
Signed-off-by: David Chou <david.j.chou@intel.com>
"""
It has been modified to build and run along with the current code base.
The formatting has been fixed to go through scripts/checkpatch.pl,
and the DPRINTF macros have been updated to get the instanciations checked by
the compiler.
The FPU registers saving/restoring has been updated to match the current
QEMU registers layout.
The implementation has been simplified by doing the following modifications:
- removing the code for supporting the hardware without Unrestricted Guest (UG)
mode (including all the code to fallback on TCG emulation).
- not including the Darwin support (which is not yet debugged/tested).
- simplifying the initialization by removing the leftovers from the Android
specific code, then trimming down the remaining logic.
- removing the unused MemoryListener callbacks.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <e1023837f8d0e4c470f6c4a3bf643971b2bca5be.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are not needed since linux-headers/ provides up-to-date definitions.
The constants are in linux-headers/asm-powerpc/kvm.h.
The sole users, hw/intc/xics_kvm.c and target/ppc/kvm.c, include asm/kvm.h
via sysemu/kvm.h->linux/kvm.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We allow vhost to clear VIRITO_F_IOMMU_PLATFORM which is wrong since
VIRTIO_F_IOMMU_PLATFORM is mandatory for security. Fixing this by
enforce it after vdc->get_features().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity reports that ARRAY_SIZE(elem->out_sg) (and all the others too)
is wrong because elem->out_sg is a pointer.
However, the check is not in the right place and the max_size argument
of virtqueue_map_iovec can be removed. The check on in_num/out_num
should be moved to qemu_get_virtqueue_element instead, before the call
to virtqueue_alloc_element.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 3724650db0 ("virtio: introduce virtqueue_alloc_element")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJYf+trAAoJEDNgw/dBGhJfQIgIAIGOtTwWToFhOR35QSms8JQp
OcuIc2+adMKocB9s4/zhJsvJUu0Sgfh9LhxoALTb2syXzeZETWjDPJdQ8sPR/REQ
MUC2i/GCpTpu5UysAqPbfsG+KShErqnSMcp0qlQO1IRqs734WhEISN34l6KlqSxL
1B3w6NInvLnvpi/VDUDN0Je5TDP2MK2BX0k3TTZdWWcDd/pQZZhzBW44PGDXRkfN
hriYrUr5D3jaje6h3lUB09JtOBdv5oVndyjEjCalh0e5EtVQlGrvQRVYbJEBzO2r
OCj467xfygDxVlqHgU5JiZLkvQXmuUPQrTMQURtHDbbViuE+jXjk+jmZtwDOD3Q=
=CvOE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/artyom/tags/pull-sun4v-20170118' into staging
add OpenSPARC T1 emulation
# gpg: Signature made Wed 18 Jan 2017 22:25:47 GMT
# gpg: using RSA key 0x3360C3F7411A125F
# gpg: Good signature from "Artyom Tarasenko <atar4qemu@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2AD8 6149 17F4 B2D7 05C0 BB12 3360 C3F7 411A 125F
* remotes/artyom/tags/pull-sun4v-20170118: (30 commits)
target-sparc: fix up niagara machine
target-sparc: move common cpu initialisation routines to sparc64.c
target-sparc: implement sun4v RTC
target-sparc: add ST_BLKINIT_ ASIs for UA2005+ CPUs
target-sparc: store the UA2005 entries in sun4u format
target-sparc: implement UA2005 ASI_MMU (0x21)
target-sparc: add more registers to dump_mmu
target-sparc: implement auto-demapping for UA2005 CPUs
target-sparc: allow 256M sized pages
target-sparc: simplify ultrasparc_tsb_pointer
target-sparc: implement UA2005 TSB Pointers
target-sparc: use SparcV9MMU type for sparc64 I/D-MMUs
target-sparc: replace the last tlb entry when no free entries left
target-sparc: ignore writes to UA2005 CPU mondo queue register
target-sparc: allow priveleged ASIs in hyperprivileged mode
target-sparc: use direct address translation in hyperprivileged mode
target-sparc: fix immediate UA2005 traps
target-sparc: implement UA2005 rdhpstate and wrhpstate instructions
target-sparc: implement UA2005 GL register
target-sparc: implement UA2005 hypervisor traps
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hints printed with error_printf_unless_qmp() are suppressed outside
monitor context. Reproducer:
$ qemu-system-x86_64 -m 1Z
qemu-system-x86_64: -m 1Z: Parameter 'size' expects a size
Print to stderr instead. The reproducer now additionally prints:
You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170105135957.12003-1-marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
C11 allows errno to be clobbered by pretty much any library function
call, so in general callers need to take care to save errno before
calling other functions.
However, for error reporting functions this is rather awkward and can
make the code on the caller side more complicated than
necessary. error_setg_errno() already takes care of preserving errno
and some functions rely on that, so just promise that we continue to
do so in the future.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1469611466-31574-1-git-send-email-silbe@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove the Niagara stub implementation from sun4u.c and add a machine,
compatible with Legion simulator from the OpenSPARC T1 project.
The machine uses the firmware supplied with the OpenSPARC T1 project,
http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2
in the directory S10image/, and is able to boot the supplied Solaris 10 image.
Note that for compatibility with the naming conventions for SPARC machines
the new machine name is lowercase niagara.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In OpenSPARC T1+ TWINX ASIs in store instructions are aliased
with Block Initializing Store ASIs.
"UltraSPARC T1 Supplement Draft D2.1, 14 May 2007" describes them
in the chapter "5.9 Block Initializing Store ASIs"
Integer stores of all sizes are allowed with these ASIs.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
According to chapter 13.3 of the
UltraSPARC T1 Supplement to the UltraSPARC Architecture 2005,
only the sun4u format is available for data-access loads.
Store UA2005 entries in the sun4u format to simplify processing.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Cédric Le Goater
Peter Maydell
Marcin Krzeminski
Alastair D'Silva
Michael S. Tsirkin
Yi Min Zhao
Pierre Morel
Fei Li
Cornelia Huck
Christian Borntraeger
Alex Kompel
Thomas Huth
Ladi Prosek
Zhang Chen
Marc-André Lureau
Vincent Palatin
Paolo Bonzini
Jason Wang
Sascha Silbe
Artyom Tarasenko