Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
This patch introduces checkpoints that synchronize cpu thread and iothread.
When checkpoint is met in the code all asynchronous events from the queue
are executed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Clock ticks are considered as the sources of non-deterministic data for
virtual machine. This patch implements saving the clock values when they
are acquired (virtual, host clock).
When replaying the execution corresponding values are read from log and
transfered to the module, which wants to read the values.
Such a design required the clock polling to be synchronized. Sometimes
it is not true - e.g. when timeouts for timer lists are checked. In this case
we use a cached value of the clock, passing it to the client code.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162427.8676.36558.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
The normal value for the event is to be set. If we do not do
this, pause_all_vcpus (through qemu_clock_enable) hangs unless
timerlist_run_timers has been run at least once for the timerlist.
This can happen with the following patches, that make aio_notify do
nothing most of the time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 691a0c9c introduced a mechanism by which QEMU_CLOCK_HOST can
notify other parts of the emulator when the host clock has jumped
backward. This is used to avoid stalling timers that were scheduled
based on the host clock.
However, if the host clock jumps forward, then timers that were
scheduled based on the host clock may fire rapidly and cause other
problems. For example, the mc146818rtc periodic timer will block
execution of the VM and consume host CPU while firing every interrupt
for the time period that was skipped by the host clock.
To correct that problem, this commit fires the reset notification if the
host clock jumps forward by more than a hard-coded limit. The limit is
currently set to a value of 60 seconds, which should be small enough to
prevent excessive timer loops, but large enough to avoid frequent resets
in idle VMs.
Signed-off-by: Paul Donohue <qemu-git@PaulSD.com>
Message-Id: <20150612140845.GD2749@TopQuark.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-timer.c was including a lot more headers than it needed to,
presumably for historical reasons. In particular, it included
ui/console.h; this now tries to pull in <pixman.h>, which will
cause a compilation failure in --disable-tools --disable-system
configurations when running "make check" (which builds qemu-timer.c,
even though the linux-user binaries themselves don't need it).
Fix this build failure by trimming down the set of included
headers severely -- we only really need main-loop.h and timer.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421770600-17525-1-git-send-email-peter.maydell@linaro.org
In some cases, a timer was set to NULL so that we could check if it is
initialized. Use the timer_list field instead, and add a timer_deinit
function that NULLs it.
It then makes sense that timer_del be a no-op (instead of a crasher) on
such a de-initialized timer. It avoids the need to poke at the timerlist
field to check if the timers are initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
=ncys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
sdhci: Support SDHCI devices on PCI
sdhci: Define SDHCI PCI ids
sdhci: Add "sysbus" to sdhci QOM types and methods
sdhci: Remove class "virtual" methods
sdhci: Set a default frequency clock
serial: only resample THR interrupt on rising edge of IER.THRI
serial: update LSR on enabling/disabling FIFOs
serial: clean up THRE/TEMT handling
serial: reset thri_pending on IER writes with THRI=0
linuxboot: fix loading old kernels
kvm/apic: fix 2.2->2.1 migration
target-i386: add Ivy Bridge CPU model
target-i386: add f16c and rdrand to Haswell and Broadwell
target-i386: add VME to all CPUs
pc: add 2.3 machine types
i386: do not cross the pages boundaries in replay mode
cpus: make icount warp behave well with respect to stop/cont
timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
cpu-exec: invalidate nocache translation if they are interrupted
icount: introduce cpu_get_icount_raw
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces new QEMU_CLOCK_VIRTUAL_RT clock, which
should be used for icount warping. In the next patch, it
will be used to avoid a huge icount warp when a virtual
machine is stopped for a long time.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In qemu_poll_ns(), when we convert an int64_t nanosecond timeout into
a struct timespec, we may accidentally run into overflow problems if
the timeout is very long. This happens because the tv_sec field is a
time_t, which is signed, so we might end up setting it to a negative
value by mistake. This will result in what was intended to be a
near-infinite timeout turning into an instantaneous timeout, and we'll
busy loop. Cap the maximum timeout at INT32_MAX seconds (about 68 years)
to avoid this problem.
This specifically manifested on ARM hosts as an extreme slowdown on
guest shutdown (when the guest reprogrammed the PL031 RTC to not
generate alarms using a very long timeout) but could happen on other
hosts and guests too.
Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1416939705-1272-1-git-send-email-peter.maydell@linaro.org
Clocks are initialized in qemu_init_main_loop. They are not needed before it.
Initializing them twice is not only unnecessary but is harmful: it results in
memory leak and potentially can lead to a situation where different parts of
QEMU use different sets of timers.
To avoid it remove init_clocks call from main and add an assertion to
qemu_clock_init that corresponding clock has not been initialized yet.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These let a user anticipate the deadline of a timer, atomically with
other sites that call the function. This helps avoiding complicated
lock hierarchies.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After disabling the QemuClock, we should make sure that no QemuTimers
are still in flight. To implement that with light overhead, we resort
to QemuEvent. The caller of disabling will wait on QemuEvent of each
timerlist.
Note, qemu_clock_enable(foo,false) can _not_ be called from timer's cb.
Also, the callers of qemu_clock_enable() should be protected by the BQL.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can deduce the result from expire_time, by making it always -1 if
the timer is not in the active_timers list. We need to check against
negative times passed to timer_mod_ns; clamping them to zero is not
a problem because the only clock that has a zero value at VM startup
is QEMU_CLOCK_VIRTUAL, and it is monotonic so it cannot be non-zero.
QEMU_CLOCK_HOST, instead, is not monotonic but it cannot go to negative
values unless the host time is seriously screwed up and points to
the 1960s.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce QEMUTimerList->active_timers_lock to protect the linked list
of active timers. This allows qemu_timer_mod_ns() to be called from any
thread.
Note that vm_clock is not thread-safe and its use of
qemu_clock_has_timers() works fine today but is also not thread-safe.
The purpose of this patch is to eventually let device models set or
cancel timers from a vcpu thread without holding the global mutex.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
host_alarm_handler() is invoked from the signal processing thread
(currently the iothread). Previously we did processing in a real signal
handler with signalfd and therefore needed signal-safe timer code.
Today host_alarm_handler() just marks the alarm timer as expired/pending
and notifies the main loop using qemu_notify_event().
Therefore these outdated comments about signal safety can be dropped.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the legacy interface from include/qemu/timers.h.
Ensure struct QEMUClock is not exposed at all.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now we have timerlistgroups implemented and main_loop_tlg, we
no longer need the concept of a default timer list associated
with each clock. Remove it and simplify initialisation of
clocks and timer lists.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rearrange timer.h so it is in order by function type.
Make legacy functions call non-legacy functions rather than vice-versa.
Convert cpus.c to use new API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove qemu_clock_deadline and qemu_timerlist_deadline now we are using
the ns functions throughout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Notify all timerlists derived from vm_clock in icount warp
calculations.
When calculating timer delay based on vm_clock deadline, use
all timerlists.
For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.
NB: thread safety - when different timerlists sit on different
threads, this will need some locking.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On qemu_mod_timer_ns, ensure qemu_notify or aio_notify is called to
end the appropriate poll(), irrespective of use_icount value.
On qemu_clock_enable, ensure qemu_notify or aio_notify is called for
all QEMUTimerLists attached to the QEMUClock.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add QEMUTimerListGroup and helper functions, to represent
a QEMUTimerList associated with each clock. Add a default
QEMUTimerListGroup representing the default timer lists
which are not associated with any other object (e.g.
an AioContext as added by future patches).
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Split QEMUClock into QEMUClock and QEMUTimerList so that we can
have more than one QEMUTimerList associated with the same clock.
Introduce a main_loop_timerlist concept and make existing
qemu_clock_* calls that actually should operate on a QEMUTimerList
call the relevant QEMUTimerList implementations, using the clock's
default timerlist. This vastly reduces the invasiveness of this
change and means the API stays constant for existing users.
Introduce a list of QEMUTimerLists associated with each clock
so that reenabling the clock can cause all the notifiers
to be called. Note the code to do the notifications is added
in a later patch.
Switch QEMUClockType to an enum. Remove global variables vm_clock,
host_clock and rt_clock and add compatibility defines. Do not
fix qemu_next_alarm_deadline as it's going to be deleted.
Add qemu_clock_use_for_deadline to indicate whether a particular
clock should be used for deadline calculations. When use_icount
is true, vm_clock should not be used for deadline calculations
as it does not contain a nanosecond count. Instead, icount
timeouts come from the execution thread doing aio_notify or
qemu_notify as appropriate. This function is used in the next
patch.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make qemu_run_timers and qemu_run_all_timers return progress
so that aio_poll etc. can determine whether a timer has been
run.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make treatment of disabled clocks consistent in deadline calculation
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add utility functions to qemu-timer.c for nanosecond timing.
Add qemu_clock_deadline_ns to calculate deadlines to
nanosecond accuracy.
Add utility function qemu_soonest_timeout to calculate soonest deadline.
Add qemu_timeout_ns_to_ms to convert a timeout in nanoseconds back to
milliseconds for when ppoll is not used.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename qemu_new_clock to qemu_clock_new.
Expose clock types.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename four functions in preparation for new API.
Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These are needed for any of the Win32 alarm timer implementations.
They are not tied to mmtimer exclusively.
Jacob tested this patch with both mmtimer and Win32 timers.
Cc: qemu-stable@nongnu.org
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
A compiler warning is caused by the unused local function reinit_timers
on non-POSIX hosts. Include that function only for POSIX hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Timers are not inherited by the child of a fork(2), so just use
pthread_atfork to reinstate them after daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID. We need configure to check for
both before using it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ptimer_head is an invariant pointer to clock->active_timers.
Remove it, and just reference clock->active_timers directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
QEMU will hang when fed the following command-line
qemu-system-mips -kernel vmlinux-2.6.32-5-4kc-malta -append "console=ttyS0" -nographic -net none
The -net none is important otherwise it seems some events are generated
causing the things to work. When it doesn't work, the guest hangs when
measuring the CPU frequency, after the following line:
[ 0.000000] NR_IRQS:256
Pressing a key on the serial port unblocks it, hinting that the problem
is due to the recent elimination of the 1 second timeout in the main
loop.
The problem is that because init_timer_alarm sets the timer's pending
flag to true, the alarm timer is never armed until after the first time
through the main loop. Thus the bug started when QEMU started testing
the pending flag in qemu_mod_timer (commit 1828be3, more alarm timer
cleanup, 2010-03-10).
But actually, it isn't true at all that a timer is pending when the
alarm timer is created, and the real bug has been latent forever: the
fix is to remove the bogus setting of pending flag.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell
Pavel Dovgalyuk
Paolo Bonzini
Paul Donohue
Kirill Batuzov
Stefan Weil
Liu Ping Fan
Stefan Hajnoczi
Alex Bligh
Anthony Liguori
Richard Henderson