Since Python 3.11 asyncio.TimeoutError is an alias for TimeoutError, but
in older versions it's not. We really have to catch asyncio.TimeoutError
here, otherwise a slow test run will fail (as has happened multiple
times on CI recently).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125152150.42389-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're seeing timeouts for this test on CI runs (specifically for
ubuntu-20.04-s390x-all). It doesn't fail consistently, but even the
successful runs take about 27 or 28 seconds, which is not very far from
the 30 seconds timeout.
Bump the timeout a bit to make failure less likely even on this CI host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125165803.48373-1-kwolf@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If socket path is too long (longer than 108 bytes), socket can't be
opened. This might lead to failure when test dir path is long enough.
Make sure socket is created in iotests.sock_dir to avoid such a case.
This commit basically aligns iotests/264 with the rest of iotests.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240125135237.189493-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not
polled during nested event loops. The coroutine currently reschedules
itself in the main loop's qemu_aio_context AioContext, which is polled
during nested event loops. One known problem is that QMP device-add
calls drain_call_rcu(), which temporarily drops the BQL, leading to all
sorts of havoc like other vCPU threads re-entering device emulation code
while another vCPU thread is waiting in device emulation code with
aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the
iohandler AioContext. This avoids trouble with nested event loops. His
original idea was to move coroutine rescheduling to
monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch()
because we don't know if the QMP handler needs to run in coroutine
context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have
been nicer since it's associated with the monitor implementation and not
as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of
QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985
Buglink: https://issues.redhat.com/browse/RHEL-17369
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The common.qemu bash functions allow tests to interact with the QMP
monitor of a QEMU process. I spent two days trying to update 141 when
the order of the test output changed, but found it would still fail
occassionally because printf() and QMP events race with synchronous QMP
communication.
I gave up and ported 141 to the existing Python API for QMP tests. The
Python API is less affected by the order in which QEMU prints output
because it does not print all QMP traffic by default.
The next commit changes the order in which QMP messages are received.
Make 141 reliable first.
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a filter function for QMP responses that contain QEMU's
automatically generated node ids. The ids change between runs and must
be masked in the reference output.
The next commit will use this new function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're still seeing timeouts in qtests that use a TCG payload with TCI
on a slow k8s runner:
https://gitlab.com/qemu-project/qemu/-/jobs/5990992722
So we should bump the timeout of cdrom-test to see whether that
fixes the issue.
Now, cdrom-test, as bios-tables-test, pxe-test and vmgenid-test use
the boot_sector_test() function for running a TCG payload. That
function already uses an internal timeout of 600 seconds with
the remark that the test could be slow with TCI.
Thus from the outer meson test runner side, we should not use less
than 600 seconds as timeout values for these tests. Let's bump them
on the meson side to 610 seconds so that the tests themselves can
run with their internal 600 seconds timeout and have some additional
seconds on top for reporting the outcome.
Message-ID: <20240124084412.465638-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test-iov code uses usleep() with small values (<= 30) in some
nested loops with many iterations. This causes a small delay on OSes
like Linux that have a precise sleeping mechanism, but on systems
like NetBSD and OpenBSD, each usleep() call takes multiple microseconds,
which then sum up in a total test time of multiple minutes!
Looking at the code, the usleep() does not really seem to be necessary
here - if not enough data could be send, we should simply always use
select() to wait 'til we can send more. Thus remove the usleep() and
re-arrange the code a little bit to make it more clear what is going
on here.
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240122153347.71654-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On the slow k8s CI runner, the test sometimes takes more than 240
seconds. See for example this run here where it took ~ 267 seconds:
https://gitlab.com/qemu-project/qemu/-/jobs/5806087027#L4769
Thus we have to bump the timeout here even further to be on the
safe side. Let's use 360 seconds which should hopefully really be
high enough now.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2097
Message-ID: <20240123110353.30658-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This update includes support for privileged instructions.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Tested-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <20240114232354.4109231-1-bcain@quicinc.com>
When icount and ibreak exceptions are due to happen on the same address
icount has higher precedence.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231130171920.3798954-3-jcmvbkbc@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the pkgsrc-2023Q3 release [*], the py-expat package has been
merged into the base 'python' package:
- Several packages have been folded into base packages. While the
result is simpler, those updating may need to force-remove the
secondary packages, depending on the update method. When doing
make replace, one has to pkg_delete -f the secondary packages.
pkgin handles at least the python packages correctly, removing the
split package when updating python. Specific packages and the
former packages now included:
* cairo: cairo-gobject
* python: py-cElementTree py-curses py-cursespanel py-expat
py-readline py-sqlite3
Remove py311-expat from the package list in order to avoid:
### Installing packages ...
processing remote summary (http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All)...
database for http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All is up-to-date
py311-expat is not available in the repository
...
calculating dependencies.../py311-expat is not available in the repository
pkg_install error log can be found in /var/db/pkgin/pkg_install-err.log
[*] https://mail-index.netbsd.org/netbsd-announce/2024/01/01/msg000360.html
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2109
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240117140746.23511-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This command has been deprecated before the 8.1 release,
in commit e9ccfdd91d ("hmp: Add 'one-insn-per-tb' command
equivalent to 'singlestep'"). Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Dr. David Alan Gilbert" <dave@treblig.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This member has been deprecated before the 8.1 release, in commit
34c18203d4 ("qmp: Deprecate 'singlestep' member of StatusInfo").
Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By default, the timeout to receive any specified event from the QEMU VM is 60
seconds set by the python avocado test framework. Please see event_wait() and
events_wait() in python/qemu/machine/machine.py. If the matching event is not
triggered within that interval, an asyncio.TimeoutError is generated. Since the
timeout for the bits avocado test is 200 secs, we need to make event_wait()
timeout of the same value as well so that an early timeout is not triggered by
the avocado framework.
CC: peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2077
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240117042556.3360190-1-anisinha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
make check-tcg fails on Fedora with:
vtimer.c:9:10: fatal error: inttypes.h: No such file or directory
Fedora has a minimal aarch64 cross-compiler, which satisfies the
configure checks, so it's chosen instead of the dockerized one.
There is no cross-version of inttypes.h, however.
Fix by using stdint.h instead. The test does not require anything
from inttypes.h anyway.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240108125030.58569-1-iii@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The npcm7xx_watchdog_timer-test can take more than 60 seconds in
SPEED=slow mode on a loaded host system.
Bumping to 2 minutes will give more headroom.
Message-ID: <20240112164717.1063954-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test_prescaler() part in the npcm7xx_watchdog_timer test is quite
repetitive, testing all possible combinations of the WTCLK and WTIS
bitfields. Since each test spins up a new instance of QEMU, this is
rather an expensive test, especially on loaded host systems.
For the normal quick test mode, it should be sufficient to test the
corner settings of these fields (i.e. 0 and 3), so we can speed up
this test in the default mode quite a bit.
Message-ID: <20240115070223.30178-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running with TCI, the boot-serial-test can take longer than 3 minutes:
https://gitlab.com/qemu-project/qemu/-/jobs/5890481086#L4774
Bump the timeout to 4 minutes to avoid CI failures here.
Message-ID: <20240115071146.31213-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've found the source of flakiness in this test, so re-enable it.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20230606144551.24367-4-farosas@suse.de
[peterx: rebase to 2a61a6964c, to use migration_test_add()]
Signed-off-by: Peter Xu <peterx@redhat.com>
Replace the tests registration with the new function that prints tests
names.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-8-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Our usage of gtest results in us losing the very basic functionality
of "knowing which test failed". The issue is that gtest only prints
test names ("paths" in gtest parlance) once the test has finished, but
we use asserts in the tests and crash gtest itself before it can print
anything. We also use a final abort when the result of g_test_run is
not 0.
Depending on how the test failed/broke we can see the function that
trigged the abort, which may be representative of the test, but it
could also just be some generic function.
We have been relying on the primitive method of looking at the name of
the previous successful test and then looking at the code to figure
out which test should have come next.
Add a wrapper to the test registration that does the job of printing
the test name before running.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We're currently just asserting when incoming migration fails. Let's
print the error message from QMP as well.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
- add LE microblaze test to avocado
- use modern snapshot=on to avoid trashing disk image
- use plain bool for fe_is_open
- various updates to qtest timeouts
- enable meson test timeouts
- tweak the readthedocs environment
- partially revert un-flaking x86_64
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWhPccACgkQ+9DbCVqe
KkS5agf+OoW6HOitt34YeL6cGGtIKaxbta+Fs6jq+ucIbN63TmLTuKrmPiRNxjuo
Fj2Qvh9R7Tl7Q/a7ZAym0Fze7GtsvvsidkiQS4pmi9vYuJrhS734CxXHT8JS6zJr
ymQ0nGZODg1cVB4oAR9sXo/OwEQdDTSgKp8wdNr930fxYwokUKBUgcOqElu3SWHv
duSYDuaflnP5B8ZGbb1ZnOlwS9lZIHTwjZyN5J1YtxF0T8Ez4A+xseEOpQ/00MoE
Ecjdp3ELCxzOI+1U33Yni7ol//fxQpRKi+xf2fGIxhuSA3i32rmY5NWTvl7VwuS1
gXryjX2rukSujySP3vkdtTp0dmkbpg==
=ZuDd
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu into staging
testing and misc updates
- add LE microblaze test to avocado
- use modern snapshot=on to avoid trashing disk image
- use plain bool for fe_is_open
- various updates to qtest timeouts
- enable meson test timeouts
- tweak the readthedocs environment
- partially revert un-flaking x86_64
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWhPccACgkQ+9DbCVqe
# KkS5agf+OoW6HOitt34YeL6cGGtIKaxbta+Fs6jq+ucIbN63TmLTuKrmPiRNxjuo
# Fj2Qvh9R7Tl7Q/a7ZAym0Fze7GtsvvsidkiQS4pmi9vYuJrhS734CxXHT8JS6zJr
# ymQ0nGZODg1cVB4oAR9sXo/OwEQdDTSgKp8wdNr930fxYwokUKBUgcOqElu3SWHv
# duSYDuaflnP5B8ZGbb1ZnOlwS9lZIHTwjZyN5J1YtxF0T8Ez4A+xseEOpQ/00MoE
# Ecjdp3ELCxzOI+1U33Yni7ol//fxQpRKi+xf2fGIxhuSA3i32rmY5NWTvl7VwuS1
# gXryjX2rukSujySP3vkdtTp0dmkbpg==
# =ZuDd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 12 Jan 2024 13:25:27 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu: (22 commits)
tests/avocado: partially revert unmasking of replay_linux tests
readthodocs: fully specify a build environment
mtest2make: stop disabling meson test timeouts
tests/fp: Bump fp-test-mulAdd test timeout to 3 minutes
tests/unit: Bump test-crypto-block test timeout to 5 minutes
tests/unit: Bump test-aio-multithread test timeout to 2 minutes
tests/qtest: Bump the device-introspect-test timeout to 12 minutes
qtest: bump bios-table-test timeout to 9 minutes
qtest: bump aspeed_smc-test timeout to 6 minutes
qtest: bump qos-test timeout to 2 minutes
qtest: bump boot-serial-test timeout to 3 minutes
qtest: bump prom-env-test timeout to 6 minutes
qtest: bump pxe-test timeout to 10 minutes
qtest: bump test-hmp timeout to 4 minutes
qtest: bump npcm7xx_pwm-test timeout to 5 minutes
qtest: bump qom-test timeout to 15 minutes
qtest: bump migration-test timeout to 8 minutes
qtest: bump min meson timeout to 60 seconds
chardev: use bool for fe_is_open
gitlab: include microblazeel in testing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
-----BEGIN PGP SIGNATURE-----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=F/j2
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu into staging
* Fix non-deterministic failures of the 'netdev-socket' qtest
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWgHlgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXAnBAAjQve/Jmfp9p8eQmswG7cl/a2TuJ59b9X
# SFRja2PprV/Wp4kxxEJX4er9F2+rlMusNL62LBp/QjZi9u4lCvCmuB7sMa0wEkjr
# BPPBrkxkAT+/8vhGpYg2GrxZv/UOLkycp3sjEp4v5yXWQw+OEBnkZZ+AuHddpnEr
# NKMKss71uQmccvuzD5FMDfbJQcSBD/yGPyFfDrv1RKreYRlbkEDVlcVoZpfoMwQY
# Pl167iDdmjVtsT+4wf8vHo5W/AYKDOjlV6AoujCnJVZnGx6BtDLiF/iNJ/VU1Ty5
# cRxySPT64HG+cGrbRqz9IjDvs++WW5EQn1jPY8NO2XFz3sney6Cs/pLKjqJY9S7P
# kfOXOBZG3zOI1kgd/CSR5b4szg4XvtTZaupczKiGOpYC9klf0oQNXGU5jXi3Csop
# Q332oUgiPeNdOx/4tXobFX6RwVCqLRYZbHx9RRYSxWlqJJPAB74/n+RZsmOtsxuJ
# RaiPKDmbVlslkUm78gIa5e6DMwDk2wmlkqa64W7VZxyqfQTRDPiPvfMGePkj6tmZ
# h9vUsELwwORlHpZyL08n0fzs3aeIYwzPwhfr+5iQZIawIp4Zqo8i8Lic/WfIlok9
# rmPIA0mjs1VtrUsroItw4NcY04xcVa7hkhz4EbkZROrfGamdkLuvbk2OKuOeoL0U
# lpgtQL6jA7E=
# =F/j2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 16:59:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large
tests/tcg/s390x: Test LOAD ADDRESS EXTENDED
target/s390x: Fix LAE setting a wrong access register
scripts/checkpatch: Support codespell checking
hw/s390x/ccw: Replace dirname() with g_path_get_dirname()
hw/s390x/ccw: Replace basename() with g_path_get_basename()
target/s390x/kvm/pv: Provide some more useful information if decryption fails
gitlab: fix s390x tag for avocado-system-centos
tests/qtest/virtio-ccw: Fix device presence checking
qtest: ensure netdev-socket tests have non-overlapping names
net: handle QIOTask completion to report useful error message
net: add explicit info about connecting/listening state
Revert "tests/qtest/netdev-socket: Raise connection timeout to 120 seconds"
Revert "osdep: add getloadavg"
Revert "netdev: set timeout depending on loadavg"
qtest: use correct boolean type for failover property
q800: move dp8393x_prom memory region to Q800MachineState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems we were premature in declaring replay_linux.py fixed. The
x86_64 image still seems to hang occasionally. I've raised a new bug
to cover it:
https://gitlab.com/qemu-project/qemu/-/issues/2094
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode with --enable-debug on a very loaded
system, the fp-test-mulAdd test can take longer than 2 minutes. Bump the
timeout to three minutes to make sure it passes in such situations, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-16-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-crypto-block can take longer than 4 minutes.
Bump the timeout to 5 minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-15-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-aio-multithread can take longer than 1 minute.
Bump the timeout to two minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-14-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the test in slow mode on a very loaded system with the
arm/aarch64 target and with --enable-debug, it can take longer than
10 minutes to finish the introspection test. Bump the timeout to twelve
minutes to make sure that it also finishes in such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-13-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is reliably hitting the current 2 minute timeout in GitLab CI,
and for the TCI job, it even hits a 6 minute timeout.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-12-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-12-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
On a loaded system with --enable-debug, this test can take longer than
5 minutes. Raising the timeout to 6 minutes gives greater headroom for
such situations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Increase the timeout to 6 minutes for very loaded systems]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-11-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The qos-test takes just under 1 minute in a --enable-debug
build. Bumping to 2 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-10-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The boot-serial-test takes about 1 + 1/2 minutes in a --enable-debug
build. Bumping to 3 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-9-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-9-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The prom-env-test can take more than 5 minutes in a --enable-debug
build on a loaded system. Bumping to 6 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 6 minutes instead of 3]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The pxe-test uses the boot_sector_test() function, and that already
uses a timeout of 600 seconds. So adjust the timeout on the meson
side accordingly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 600s and adjust commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-7-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The hmp test takes just under 3 minutes in a --enable-debug
build. Bumping to 4 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-6-berrange@redhat.com>
[thuth: fix copy-n-paste error in the description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-6-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The npcm7xx_pwm-test takes 3 & 1/2 minutes in a --enable-debug build.
Bumping to 5 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-5-thuth@redhat.com>
[AJB: s/pwn/pwm]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The qom-test is periodically hitting the 5 minute timeout when running
on the aarch64 emulator under GitLab CI. With an --enable-debug build
it can take over 10 minutes for arm/aarch64 targets. Setting timeout
to 15 minutes gives enough headroom to hopefully make it reliable.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The migration test should take between 1 min 30 and 2 mins on reasonably
modern hardware. The test is not especially compute bound, rather its
running time is dominated by the guest RAM size relative to the
bandwidth cap, which forces each iteration to take at least 30 seconds.
None the less under high load conditions with multiple QEMU processes
spawned and competing with other parallel tests, the worst case running
time might be somewhat extended. Bumping the timeout to 8 minutes gives
us good headroom, while still catching stuck tests relatively quickly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-3-berrange@redhat.com>
[thuth: Bump timeout to 8 minutes to make it work on very loaded systems, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
