Commit Graph

65 Commits

Author SHA1 Message Date
Kevin Wolf 8eedfbd4a5 blkdebug: Add bdrv_truncate()
This is, amongst others, required for qemu-iotests 033 to run as
intended on VHDX, which uses explicit bdrv_truncate() calls to bs->file
when allocating new blocks.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2015-04-28 15:36:09 +02:00
John Snow a069e2f137 blkdebug: fix "once" rule
Background:
  The blkdebug scripts are currently engineered so that when a debug
event occurs, a prefilter browses a master list of parsed rules for a
certain event and adds them to an "active list" of rules to be used for
the forthcoming action, provided the events and state numbers match.

  Then, once the request is received, the last active rule is used to
inject an error if certain parameters match.

  This active list is cleared every time the prefilter injects a new
rule for the first time during a debug event.

  The "once" rule currently causes the error injection, if it is
triggered, to only clear the active list. This is insufficient for
preventing future injections of the same rule.

Remedy:
  This patch /deletes/ the rule from the list that the prefilter
browses, so it is gone for good. In V2, we remove only the rule of
interest from the active list instead of allowing the "once" rule to
clear the entire list of active rules.

Impact:
  This affects iotests 026. Several ENOSPC tests that used "once" can
be seen to have output that shows multiple failure messages. After
this patch, the error messages tend to be smaller and less severe, but
the injection can still be seen to be working. I have patched the
expected output to expect the smaller error messages.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10 14:02:21 +01:00
Max Reitz 8779441b1b blkdebug: Simplify and improve filename generation
Instead of actually recreating the options from scratch, just reuse the
options given for creating the BDS, which are the configuration file
name and additional options. In case there are no additional options we
can thus create a plain filename.

This obviously results in a different output for qemu-iotest 099 which
exactly tests this filename generation. Fix it up as well.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10 10:31:11 +01:00
Max Reitz 94054183da qcow2: Optimize bdrv_make_empty()
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.

If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).

[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03 11:41:48 +00:00
Markus Armbruster 097310b53e block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
I'll use it with block backends shortly, and the name is going to fit
badly there.  It's a block layer thing anyway, not just a block driver
thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Markus Armbruster 7c84b1b831 block: Rename BlockDriverAIOCB* to BlockAIOCB*
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there.  It's a block layer thing anyway, not just a
block driver thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Stefan Hajnoczi d4362d642e blkdebug: show an error for invalid event names
It is easy to typo a blkdebug configuration and waste a lot of time
figuring out why no rules are matching.

Push the Error** down into add_rule() so we can report an error when the
event name is invalid.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25 15:24:14 +02:00
Fam Zheng 8007429a99 block: Rename qemu_aio_release -> qemu_aio_unref
Suggested-by: Benoît Canet <benoit.canet@irqsave.net>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:17 +01:00
Fam Zheng 4c781717c5 blkdebug: Drop blkdebug_aiocb_info.cancel
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:08 +01:00
Fam Zheng cbf95a0b11 blkdebug: Delete BH in bdrv_aio_cancel
Otherwise error_callback_bh will access the already released acb.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 11:07:00 +02:00
Max Reitz 2c31b04c94 blkdebug: Implement bdrv_refresh_filename()
Because blkdebug cannot simply create a configuration file, simply
refuse to reconstruct a plain filename and only generate an options
QDict from the rules instead.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:31:56 +02:00
Paolo Bonzini 9e52c53b8c blkdebug: report errors on flush too
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:11 +01:00
Stefan Hajnoczi 7e1efdf0a3 blkdebug: use BlockDriverState's AioContext
Drop the assumption that we're using the main AioContext.  Convert
qemu_bh_new() to aio_bh_new() so we use the BlockDriverState's
AioContext.

The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04 09:56:11 +02:00
Max Reitz f7d9fd8c72 block: Remove bdrv_open_image()'s force_raw option
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:22 +01:00
Max Reitz f67503e5bd block: Change BDS parameter of bdrv_open() to **
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:21 +01:00
Markus Armbruster 84d18f065f Use error_is_set() only when necessary
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Kevin Wolf eaf944a438 blkdebug: Don't leak bs->file on failure
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09 09:12:39 +01:00
Kevin Wolf 9e1cb96d9a qemu-iotests: Test pwritev RMW logic
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:25 +01:00
Kevin Wolf b35ee7fb23 blkdebug: Make required alignment configurable
The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 17:40:03 +01:00
Max Reitz 4373593d51 blkdebug: Allow command-line file configuration
Introduce the "image" option as an alternative to specifying the image
through the filename.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:18 +01:00
Max Reitz 72daa72eee block: Allow reference for bdrv_file_open()
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz 89f2b21e36 blkdebug: Use command-line in read_config()
Use qemu_config_parse_qdict() to parse the command-line options in
addition to the config file.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz 85a040e548 blkdebug: Always call read_config()
Move the check whether there actually is a config file into the
read_config() function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz d4881b9bcb blkdebug: Don't require sophisticated filename
If the filename is not prefixed by "blkdebug:" in
blkdebug_parse_filename(), the blkdebug driver was not selected through
that protocol prefix, but by an explicit command line option
(file.driver=blkdebug or something similar). Contrary to the current
reaction, this is not a problem at all; we just need to store the
filename (in the x-image option) and can go on; the user just has to
manually specify the config option.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz 466b49f276 blkdebug: Use errp for read_config()
Use an Error variable in the read_config() function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Peter Crosthwaite 87ea75d5e1 qemu-option: Remove qemu_opts_create_nofail
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.

null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 15:02:30 -05:00
Fam Zheng c547e5640d blkdebug: Use QLIST_FOREACH_SAFE to resume IO
Qemu-iotest 030 was broken.

When the coroutine runs and finishes, it will remove itself from the req
list, so let's use safe version of foreach to avoid use after free.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13 17:11:19 +01:00
Fam Zheng 4cc70e9337 blkdebug: add "remove_break" command
This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-29 13:40:37 +01:00
Max Reitz 10ffa72fae blkdebug: Employ error parameter
Make use of the error parameter in blkdebug_open.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 16:50:00 +02:00
Max Reitz 34b5d2c68e block: Error parameter for open functions
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz 015a1036a7 bdrv: Use "Error" for opening images
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:47 +02:00
Max Reitz afa50193cd qcow2-refcount: Repair shared refcount blocks
If the refcount of a refcount block is greater than one, we can at least
try to repair that problem by duplicating the affected block.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-02 10:06:59 +02:00
Kevin Wolf bf736fe34c blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06 11:27:22 +02:00
Kevin Wolf 56d1b4d21d block: Remove filename parameter from .bdrv_file_open()
It is unused now in all block drivers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 11:34:35 +02:00
Kevin Wolf f468121290 blkdebug: Use bdrv_open options instead of filename
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 10:27:59 +02:00
Kevin Wolf 787e4a8500 block: Add options QDict to bdrv_file_open() prototypes
The new parameter is unused yet.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:31 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini 737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Paolo Bonzini 077805fa92 janitor: do not rely on indirect inclusions of or from qemu-char.h
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!).  Clean this up, and also
add missing inclusions of qemu-char.h itself.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:52 +01:00
Kevin Wolf 3c90c65d7a blkdebug: Implement suspend/resume of AIO requests
This allows more systematic AIO testing. The patch adds three new
operations to blkdebug:

 * Setting a "breakpoint" on a blkdebug event. The next request that
   triggers this breakpoint is suspended and is tagged with a name.
   The breakpoint is removed after a request has triggered it.

 * A suspended request (identified by it's tag) can be resumed

 * It's possible to check whether a suspended request with a given
   tag exists. This can be used for waiting for an event.

Ideally, we would instead tag requests right when they are created and
set breakpoints for individual requests. However, at this point the
block layer doesn't allow this easily, and breakpoints that trigger for
any request already allow a lot of useful testing.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12 12:33:48 +01:00
Kevin Wolf 9e35542b0f blkdebug: Factor out remove_rule()
The cleanup work to remove a rule depends on the type of the rule. It's
easy for the existing rules as there is no data that must be cleaned up
and is specific to a type yet, but the next patch will change this.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12 12:33:48 +01:00
Kevin Wolf 312a2ba0eb blkdebug: Allow usage without config file
As soon as new rules can be set during runtime, as introduced by the
next patch, blkdebug makes sense even without a config file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12 12:33:48 +01:00
Stefan Hajnoczi d7331bed11 aio: rename AIOPool to AIOCBInfo
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore.  Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14 18:19:21 +01:00
Paolo Bonzini 8f96b5be92 blkdebug: process all set_state rules in the old state
Currently it is impossible to write a blkdebug script that ping-pongs
between two states, because the second set-state rule will use the
state that is set in the first.  If you have

    [set-state]
    event = "..."
    state = "1"
    new_state = "2"

    [set-state]
    event = "..."
    state = "2"
    new_state = "1"

for example the state will remain locked at 1.  This can be fixed
by first processing all rules, and then setting the state.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:56 +02:00
Paolo Bonzini e4780db429 blkdebug: optionally tie errors to a specific sector
This makes blkdebug scripts more powerful, and independent of the
exact sequence of operations performed by streaming.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 571cd43e57 blkdebug: store list of active rules
This prepares for the next patch, where some active rules may actually
not trigger depending on input to readv/writev.  Store the active rules
in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and
fetch the errno/once/immediately arguments from there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini e130225587 blkdebug: pass getlength to underlying file
This is required when using blkdebug with raw format.  Unlike qcow2/QED,
raw asks blkdebug for the length of the file, it doesn't get it from
a header.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 368e8dd10a blkdebug: tiny cleanup
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 820100fd15 blkdebug: remove sync i/o events
These are unused, except (by mistake more or less) in QED.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 29cdb2513c block: push recursive flushing up from drivers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05 14:54:39 +02:00