To handle relative mouse input the event handler needs to move the mouse
away from the screen edges. Failing to do so results in the mouse
getting stuck at invisible walls. However the current implementation for
this is broken on hosts with multiple monitors.
With multiple monitors the mouse can be located outside of the current
monitor which is not handled by the current code. Also the monitor
itself might be located at coordinates different from (0, 0).
Signed-off-by: Dennis Wölfing <denniswoelfing@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210720143940.291413-1-denniswoelfing@gmx.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alias targets have a different name than the alias property itself
(e.g. a machine's pflash0 might be an alias of a property named 'drive').
When the target's getter or setter invokes the visitor, it will use
a different name than what the caller expects, and the visitor will
not be able to find it (or will consume erroneously).
The solution is for alias getters and setters to wrap the incoming
visitor, and forward the sole field that the target is expecting while
renaming it appropriately.
This bug has been there forever, but it was exposed after -M parsing
switched from QemuOptions and StringInputVisitor to keyval and
QObjectInputVisitor. Before, the visitor ignored the name. Now, it
checks "drive" against what was passed on the command line and finds
that no such property exists.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/484
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new adaptor visitor takes a single field of the adaptee, and exposes it
with a different name.
This will be used for QOM alias properties. Alias targets can of course
have a different name than the alias property itself (e.g. a machine's
pflash0 might be an alias of a property named 'drive'). When the target's
getter or setter invokes the visitor, it will use a different name than
what the caller expects, and the visitor will not be able to find it
(or will consume erroneously).
The solution is for alias getters and setters to wrap the incoming
visitor, and forward the sole field that the target is expecting while
renaming it appropriately.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GitLab will happily publish pages generated by the latest CI pipeline
from any branch:
https://docs.gitlab.com/ee/user/project/pages/introduction.html
"Remember that GitLab Pages are by default branch/tag agnostic
and their deployment relies solely on what you specify in
.gitlab-ci.yml. You can limit the pages job with the only
parameter, whenever a new commit is pushed to a branch used
specifically for your pages."
The current "pages" job is not limited, so it is happily publishing
docs content from any branch/tag in qemu.git that gets pushed to.
This means we're potentially publishing from the "staging" branch
or worse from outdated "stable-NNN" branches
This change restricts it to only publish from the default branch
in the main repository. For contributor forks, however, we allow
it to publish from any branch, since users will have arbitrarily
named topic branches in flight at any time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210723113051.2792799-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both files logically belong to "Memory API" and are not yet listed
anywhere else explicitly. Let's add them to "Memory API".
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210723100532.27353-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter and myself volunteered to help out co-maintaining "Memory API"
with Paolo, so let's update the MAINTAINERS file.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210723100532.27353-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Edurdo asked me to take over co-maintaining "Host Memory Backends" with
Igor, as Eduardo has plenty of other things to look after.
Thanks a lot Eduardo for your excellent work in the past!
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210723100532.27353-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some cpu properties have to be set only for cpu models in builtin_x86_defs,
registered with x86_register_cpu_model_type, and not for
cpu models "base", "max", and the subclass "host".
These properties are the ones set by function x86_cpu_apply_props,
(also including kvm_default_props, tcg_default_props),
and the "vendor" property for the KVM and HVF accelerators.
After recent refactoring of cpu, which also affected these properties,
they were instead set unconditionally for all x86 cpus.
This has been detected as a bug with Nested on AMD with cpu "host",
as svm was not turned on by default, due to the wrongful setting of
kvm_default_props via x86_cpu_apply_props, which set svm to "off".
Rectify the bug introduced in commit "i386: split cpu accelerators"
and document the functions that are builtin_x86_defs-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c,"...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/477
Message-Id: <20210723112921.12637-1-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All MBZ in CR3 must be zero (APM2 15.5)
Added checks in both helper_vmrun and helper_write_crN.
When EFER.LMA is zero the upper 32 bits needs to be zeroed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210723112740.45962-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
modinfo runs the preprocessor and therefore needs all generated input files
to be there. The "depends" clause does not work in Meson 0.55.3, so for
now use "input".
Part #2: Update the rule for target-specific modules too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210723120156.1183920-1-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before commit 49afbca3b0 ("virtio-gpu: drop
use_virgl_renderer"), use_virgl_renderer was preventing calling GL
functions from non-GL context threads. The innocuously looking
g->parent_obj.use_virgl_renderer = false;
was set the first time virtio_gpu_gl_reset() was called, during
pc_machine_reset() in the main thread. Further virtio_gpu_gl_reset()
calls in IO threads, without associated GL context, were thus skipping
GL calls and avoided warnings or crashes (see also
https://gitlab.freedesktop.org/virgl/virglrenderer/-/issues/226).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210702123221.942432-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Do not instantiate an extra default VGA device if -device virtio-vga-gl
is provided.
Related to commit b36eb8860f ("virtio-gpu:
add virtio-vga-gl")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210701062421.721414-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This avoids failing to initialize virgl and crashing later on, and clear
the user expectations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210705104218.1161101-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 86dbcdd9c7.
The pre-save assert is gone now, so the migration blocker
is not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210721093347.338536-3-kraxel@redhat.com>
Since commit 551dbd0846 ("migration: check pre_save return in
vmstate_save_state") the pre_save hook can fail. So lets finally
use that to drop the guest-triggerable assert in qxl_pre_save().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210721093347.338536-2-kraxel@redhat.com>
The vhost_kernel and vhost_vdpa variables should be pre-initialized with
the $default_feature setting so that these features get disabled when
the user runs the configure scripts with --without-default-features.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "xen" variable should either contain "enabled", "disabled" or
nothing (for auto detection). But when the user currently runs the
configure script with --without-default-features, it gets set to
"no" instead. This does not work as expected, the feature will still
be enabled if the Xen headers are present. Thus set the variable
to "disabled" instead if default_feature switch has been set.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no reason why we should keep VNC enabled when the user
specified --without-default-features.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A typo prevents that many features get disabled when the user
runs "configure" with the --without-default-features switch.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
modinfo runs the preprocessor and therefore needs all generated input files
to be there. The "depends" clause does not work in Meson 0.55.3, so for
now use "input".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We recently bumped our requirement for Clang to at least version 6.0.
And according to:
https://releases.llvm.org/6.0.0/tools/clang/docs/AttributeReference.html
Clang v6.0 supports the alloc_size attribute. Thus we can drop this
check in the configure script now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210714072855.785566-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EFER.SVME has to be set, and EFER reserved bits must
be zero.
In addition the combinations
* EFER.LMA or EFER.LME is non-zero and the processor does not support LM
* non-zero EFER.LME and CR0.PG and zero CR4.PAE
* non-zero EFER.LME and CR0.PG and zero CR0.PE
* non-zero EFER.LME, CR0.PG, CR4.PAE, CS.L and CS.D
are all invalid.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-3-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All MBZ bits in CR4 must be zero. (APM2 15.5)
Added reserved bitmask and added checks in both
helper_vmrun and helper_write_crN.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The APM2 states that The processor takes a virtual INTR interrupt
if V_IRQ and V_INTR_PRIO indicate that there is a virtual interrupt pending
whose priority is greater than the value in V_TPR.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d8fb7d0969 ("vl: switch -M parsing
to keyval") stopped adding the "machine" QemuOptsList. This causes
"machine" options to not show up in QMP query-command-line-options
output. For example, libvirt cannot detect that kernel_irqchip support
is available.
Adjust the "machine" opts enumeration in
qmp_query_command_line_options() so that options are properly reported.
Fixes: d8fb7d0969 ("vl: switch -M parsing to keyval")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210721151055.424580-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The chardev-spicevmc class was not listed in chardev/spice.c, causing
"-chardev spicevmc" to fail when modules are enabled.
Reported-by: Frederic Bezies <fredbezies@gmail.com>
Fixes: 9f4a0f0978 ("modules: use modinfo for qom load", 2021-07-09)
Resolves: //gitlab.com/qemu-project/qemu/-/issues/488
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210719164435.1227794-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The point of 'qemu-img convert --bitmaps' is to be a convenience for
actions that are already possible through a string of smaller
'qemu-img bitmap' sub-commands. One situation not accounted for
already is that if a source image contains an inconsistent bitmap (for
example, because a qemu process died abruptly before flushing bitmap
state), the user MUST delete those inconsistent bitmaps before
anything else useful can be done with the image.
We don't want to delete inconsistent bitmaps by default: although a
corrupt bitmap is only a loss of optimization rather than a corruption
of user-visible data, it is still nice to require the user to opt in
to the fact that they are aware of the loss of the bitmap. Still,
requiring the user to check 'qemu-img info' to see whether bitmaps are
consistent, then use 'qemu-img bitmap --remove' to remove offenders,
all before using 'qemu-img convert', is a lot more work than just
adding a knob 'qemu-img convert --bitmaps --skip-broken-bitmaps' which
opts in to skipping the broken bitmaps.
After testing the new option, also demonstrate the way to manually fix
things (either deleting bad bitmaps, or re-creating them as empty) so
that it is possible to convert without the option.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1946084
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210709153951.2801666-4-eblake@redhat.com>
[eblake: warning message tweak, test enhancements]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Waiting until the end of the convert operation (a potentially
time-consuming task) to finally detect that we can't copy a bitmap is
bad, comparing to failing fast up front. Furthermore, this prevents
us from leaving a file behind with a bitmap that is not marked as
inconsistent even though it does not have sane contents.
This fixes the problems exposed in the previous patch to the iotest:
it adds a fast failure up front, and even if we don't fail early, it
ensures that any bitmap we add but do not properly populate is removed
again rather than left behind incomplete.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210709153951.2801666-3-eblake@redhat.com>
[eblake: add a hint to the warning message, simplify name computation]
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Enhance the test to demonstrate existing less-than-stellar behavior of
qemu-img with a qcow2 image containing an inconsistent bitmap: we
don't diagnose the problem until after copying the entire image (a
potentially long time), and when we do diagnose the failure, we still
end up leaving an empty bitmap in the destination. This mess will be
cleaned up in the next patch.
While at it, rename the test now that we support useful iotest names,
and fix a missing newline in the error message thus exposed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210709153951.2801666-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Set CF_SINGLE_STEP when single-stepping is enabled.
This avoids the need to flush all tb's when turning
single-stepping on or off.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The access internal to tb_cflags() is atomic.
Avoid re-reading it as such for the multiple uses.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trigger breakpoints before beginning translation of a TB
that would begin with a BP. Thus we never generate code
for the BP at all.
Single-step instructions within a page containing a BP so
that we are sure to check each insn for the BP as above.
We no longer need to flush any TBs when changing BPs.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/286
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/404
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/489
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to want two things:
(1) check for breakpoints will want to break out of the loop here,
(2) cflags can only be calculated with pc in hand.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ensure at registration that all breakpoints are in
code space, not data space.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow a breakpoint hack to move out of AVR's translator.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return false for RF set, as we do in i386_tr_breakpoint_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reuse the code at the bottom of helper_check_breakpoints,
which is what we currently call from *_tr_breakpoint_check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New hook to return true when an architectural breakpoint is
to be recognized and false when it should be suppressed.
First use must wait until other pieces are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Request that the one TB returns immediately, so that
we release the exclusive lock as soon as possible.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210717221851.2124573-7-richard.henderson@linaro.org>
Exchange the test in translator_use_goto_tb for CF_NO_GOTO_TB,
and the test in tb_gen_code for setting CF_COUNT_MASK to 1.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210717221851.2124573-6-richard.henderson@linaro.org>
The purpose of suppressing goto_ptr from -d nochain had been
to return to the main loop so that -d cpu would be recognized.
But we now include -d cpu logging in helper_lookup_tb_ptr so
there is no need to exclude goto_ptr.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210717221851.2124573-5-richard.henderson@linaro.org>
Move the -d nochain check to bits on tb->cflags.
These will be used for more than -d nochain shortly.
Set bits during curr_cflags, test them in translator_use_goto_tb,
assert we're not doing anything odd in tcg_gen_goto_tb. The test
in tcg_gen_exit_tb is redundant with the assert for goto_tb_issue_mask.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210717221851.2124573-4-richard.henderson@linaro.org>
