All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
Many uses of qobject_from_jsonf() convert JSON objects. Create new
convenience function qdict_from_jsonf_nofail() that includes the
conversion to QDict. The next few commits will put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-22-armbru@redhat.com>
Wrapping global variables in a struct without a use for the wrapper
struct buys us nothing but longer lines. Unwrap them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-21-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-20-armbru@redhat.com>
handle_qmp_command() reports JSON syntax errors right away. This is
wrong when OOB is enabled, because the errors can "jump the queue"
then.
The previous commit fixed the same bug for semantic errors, by
delaying the checking until dispatch. We can't delay the checking, so
delay the reporting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-19-armbru@redhat.com>
handle_qmp_command() reports certain errors right away. This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.
To fix, we need to delay errors until dispatch. Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d5317
"qmp: support out-of-band (oob) execution". Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch(). That's also due to commit cf869d5317.
The next commit will fix queue jumping for syntax errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>
When OOB is enabled, out-of-band commands are executed right away,
everything else is queued. This lets out-of-band commands "jump the
queue".
However, certain errors are always reported right away, and therefore
can jump the queue even when the erroneous input does not request
out-of-band execution. These errors are pretty unlikely to occur in
production, but it's wrong all the same. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180703085358.13941-17-armbru@redhat.com>
Change monitor_qmp_dispatch_one() to take its parameters unwrapped,
move monitor_resume() to the one caller that needs it, rename the
function to monitor_qmp_dispatch().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-16-armbru@redhat.com>
monitor_qmp_dispatch_one() frees a QMPRequest manually, because it
needs to keep a reference to ->id. Premature optimization. Take an
additional reference so we can use qmp_request_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-15-armbru@redhat.com>
Commit 71da4667db "monitor: separate QMP parser and dispatcher" moved
the handle_qmp_command tracepoint from handle_qmp_command() to
monitor_qmp_dispatch_one(). This delays tracing from enqueue time to
dequeue time. Revert that. Dequeue remains adequately visible via
tracepoint monitor_qmp_cmd_in_band.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-14-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-11-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" changed
how we check "id":
Note that in the patch I exported qmp_dispatch_check_obj() to be
used to check the request earlier, and at the same time allowed
"id" field to be there since actually we always allow that.
The part after "and" is ill-advised: it makes qemu-ga accept and
ignore "id". Revert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-10-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-9-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" made
"id" mandatory for all commands when the client accepted capability
"oob". This is rather onerous when you play with QMP by hand, and
unnecessarily so: only out-of-band commands need an ID for reliable
matching of response to command.
Revert that part of commit cf869d5317 for now, but have documentation
advise on the need to use "id" with out-of-band commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703085358.13941-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-7-armbru@redhat.com>
tests/qmp-test tests an out-of-band command overtaking a slow in-band
command. To do that, it needs:
1. An in-band command that *reliably* takes long enough to be
overtaken.
2. An out-of-band command to do the overtaking.
3. To avoid delays, a way to make the in-band command complete quickly
after it was overtaken.
To satisfy these needs, commit 469638f9cb provides the rather
peculiar oob-capable QMP command x-oob-test:
* With "lock": true, it waits for a global semaphore.
* With "lock": false, it signals the global semaphore.
To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.
Note that waiting for a semaphore violates the rules for oob-capable
commands. Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).
Having an externally visible QMP command that may hang the monitor is
not nice. Let's apply a little more ingenuity to the problem. Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.
For 1., use
{"execute": "blockdev-add", "id": ID1,
"arguments": {
"driver": "blkdebug", "node-name": ID1, "config": FIFO,
"image": { "driver": "null-co"}}}
where ID1 is an arbitrary string, and FIFO is the name of the FIFO.
For 2., use
{"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}
where ID2 is a different arbitrary string. Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.
For 3., open FIFO for writing.
Drop QMP command x-oob-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]
Events are broadcast to all monitors. If another monitor's client has
a command with the same ID in flight, the event will incorrectly claim
that command was dropped. This must be fixed before out-of-band
execution can graduate from "experimental".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-5-armbru@redhat.com>
OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands. The amount of detail is a bit
distracting there. Move the meat of the matter to new section 2.3.1
Out of band execution.
Throw in a few other improvements while there:
* 2.2 Server Greeting: Drop advice to search entire capabilities
array; should be obvious.
* 3. QMP Examples
- 3.1 Server Greeting: Update greeting to the one we expect for the
release. Now shows capability "oob". Update qmp-intro.txt
likewise.
- 3.2 Capabilities negotiation: Show client accepting capability
"oob".
- 3.7 Out-of-band execution: New.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-3-armbru@redhat.com>
Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
It's the old, lgpl vgabios implementation.
Was left in as fallback when we switched to seavgabios, so we could
easily switch back in case we see regressions. It's unused since years
now, reportedly doesn't even build, and lacks support for recently (and
not so recently) added display devices.
Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QNX reportedly requires this to boot.
Should also speed up booting other guests.
Note: Upstream seabios defaults this to 'n' to due to known problems
on physical hardware (qemu not affected), and wouldn't flip the default
to 'y'. So we adjust our local build config accordingly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Both bochs-display and ramfb are devices with a simple framebuffer and
no vga emulation or text mode. seavgabios has support for text mode
emulation (at vgabios call level), we are using that to provide some
vga compatibility support for these devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
git shortlog rel-1.11.1..rel-1.11.2
-----------------------------------
Gerd Hoffmann (11):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When installing a TLB entry, remove any cached version of the
same page in the VTLB. If the existing TLB entry matches, do
not copy into the VTLB, but overwrite it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In get_page_addr_code() when we check whether the TLB entry
is marked as TLB_RECHECK, we should not go down that code
path if the TLB entry is not valid at all (ie the TLB_INVALID
bit is set).
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629161731.16239-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 71b9a45330 we changed the condition we use
to determine whether we need to refill the TLB in
get_page_addr_code() to
if (unlikely(env->tlb_table[mmu_idx][index].addr_code !=
(addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK)))) {
This isn't the right check (it will falsely fail if the
input addr happens to have the low bit corresponding to
TLB_INVALID_MASK set, for instance). Replace it with a
use of the new tlb_hit() function, which is the correct test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The condition to check whether an address has hit against a particular
TLB entry is not completely trivial. We do this in various places, and
in fact in one place (get_page_addr_code()) we have got the condition
wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline
functions (one for a known-page-aligned address and one for an
arbitrary address), and use them in all the places where we had the
condition correct.
This is a no-behaviour-change patch; we leave fixing the buggy
code in get_page_addr_code() to a subsequent patch.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 0b5c91f ("translate-all: use per-page locking in !user-mode",
2018-06-15) introduced per-page locking. It assumed that the physical
pages corresponding to a TB (at most two pages) are always distinct,
which is wrong. For instance, an xtensa test provided by Max Filippov
is broken by the commit, since the test maps two virtual pages
to the same physical page:
virt1: 7fff, virt2: 8000
phys1 6000fff, phys2 6000000
Fix it by removing the assumption from page_lock_pair.
If the two physical page addresses are equal, we only lock
the PageDesc once. Note that the two callers of page_lock_pair,
namely page_unlock_tb and tb_link_page, are also updated so that
we do not try to unlock the same PageDesc twice.
Fixes: 0b5c91f74f
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1529944302-14186-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- add bpb/ppa15 features to default cpu model for z196 and later
- rework TOD handling and fix cpu hotplug under tcg
- various fixes
-----BEGIN PGP SIGNATURE-----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=GF+m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180702' into staging
s390x updates:
- add bpb/ppa15 features to default cpu model for z196 and later
- rework TOD handling and fix cpu hotplug under tcg
- various fixes
# gpg: Signature made Mon 02 Jul 2018 12:09:40 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180702:
s390x/tcg: fix locking problem with tcg_s390_tod_updated
s390x/kvm: indicate alignment in legacy_s390_alloc()
s390x/kvm: legacy_s390_alloc() only supports one allocation
s390x/tcg: fix CPU hotplug with single-threaded TCG
s390x/tcg: rearm the CKC timer during migration
s390x/tcg: implement SET CLOCK
s390x/tcg: SET CLOCK COMPARATOR can clear CKC interrupts
s390x/tcg: properly implement the TOD
s390x/tcg: drop tod_basetime
s390x/tod: factor out TOD into separate device
s390x/kvm: pass values instead of pointers to kvm_s390_set_clock_*()
s390x/tcg: avoid overflows in time2tod/tod2time
s390x/cpumodel: default enable bpb and ppa15 for z196 and later
loader: Check access size when calling rom_ptr() to avoid crashes
s390/ipl: fix ipl with -no-reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need for a stub, since tb_invalidate_phys_addr can be excised
altogether when TCG is disabled. This is a bit cleaner since it avoids
using code that is clearly specific to user-mode emulation (it calls
mmap_lock/unlock) for the !CONFIG_TCG case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correct the output of the "info mem" and "info tlb" monitor commands to
correctly show canonical addresses.
In 48-bit addressing mode, the upper 16 bits of linear addresses are
equal to bit 47. In 57-bit addressing mode (LA57), the upper 7 bits of
linear addresses are equal to bit 56.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20180617084025.29198-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements NPT suport for SVM by hooking into
x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether
we need to perform this 2nd stage translation, and how, is decided
during vmrun and stored in hflags2, along with nested_cr3 and
nested_pg_mode.
As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need
retaddr in that function. To avoid changing the signature of
cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys
via the CPU state.
This was tested successfully via the Jailhouse hypervisor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <567473a0-6005-5843-4c73-951f476085ca@web.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a real serial device, the open can block if the handshake
lines are in a particular state. If a QEMU is passing the serial
device to the guest, the QEMU startup is blocked opening the device
(with a symptom seen as a timeout from libvirt).
Open the serial port with O_NONBLOCK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-47-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-46-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-45-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-44-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-43-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All files using "qemu/units.h" definitions already include it directly,
we can now remove it from "qemu/cutils.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20180625124238.25339-41-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
