Instead of printing an ugly bitmask, qemu can now print a more helpful
string even for yet unknown features.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the basic infrastructure to qcow2 to handle version 3 images.
It includes code to create v3 images, allow header updates for v3 images
and checks feature bits.
It still misses support for zero clusters, so this is not a fully
compliant implementation of v3 yet.
The default for creating new images stays at v2 for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also don't infer the cluster type directly from the L2 entries, but use
qcow2_get_cluster_type() to keep everything in a single place.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
count_cow_clusters() tries to reuse existing functions, and all it
achieves is to make things much more complicated than they really are:
Everything needs COW, unless it's a normal cluster with refcount 1.
This patch implements the obvious way of doing this, and by using
qcow2_get_cluster_type() it gets rid of all flag magic.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero clusters will add another cluster type. Refactor the open-coded
cluster type detection into a switch of QCOW2_CLUSTER_* options so that
the detection is in a single place. This makes it easier to add new
cluster types.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This changes the still existing places that assume that the only flags
are QCOW_OFLAG_COPIED and QCOW_OFLAG_COMPRESSED to properly mask out
reserved bits.
It does not convert bdrv_check yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_alloc_compressed_cluster_offset() already fails if the copied flag
is set, because qcow2_write_compressed() doesn't perform COW as it would
have to do to allow this.
However, what we really want to check here is whether the cluster is
allocated or not. With internal snapshots the copied flag may not be set
on allocated clusters. Check the cluster offset instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until now, count_contiguous_clusters() has an argument that allowed to
specify flags that should be ignored in the comparison, i.e. that are
allowed to change between contiguous clusters.
This patch changes the function so that it ignores all flags by default
now and you need to pass the flags on which it should stop.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With this change, reading from a qcow2 image ignores all reserved bits
that are set in an L1 or L2 table entry.
Now get_cluster_offset() assigns *cluster_offset only the offset without
any other flags. The cluster type is not longer encoded in the offset,
but a positive return value in case of success.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows that different snapshots of an image can have different
sizes, which is a requirement for enabling image resizing even with
images that have internal snapshots.
We don't do the actual support for it now, but make sure that the
additional field is present and not completely ignored in all version 3
images. When trying to load a snapshot of different size, it returns
an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This updates the qcow2 specification to cover version 3. It contains the
following changes:
- Added compatible/incompatible/auto-clear feature bits plus an optional
feature name table to allow useful error messages even if an older
version doesn't know some feature at all.
- Configurable refcount width. If you don't want to use internal
snapshots, make refcounts one bit and save cache space and I/O.
- Zero cluster flags. This allows discard even with a backing file that
doesn't contain zeros. It is also useful for copy-on-read/image
streaming, as you'll want to keep sparseness without accessing the
remote image for an unallocated cluster all the time.
- Fixed internal snapshot metadata to use 64 bit VM state size. You
can't save a snapshot of a VM with >= 4 GB RAM today.
- Extended internal snapshot metadata to contain the disk size, so that
resizing images that have snapshots can be allowed in the future.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcount block allocation and refcount table growth rely on
s->free_cluster_index pointing to somewhere after the current
allocation. Change qcow2_alloc_cluster_at() to fulfill this
assumption.
Without this change it could happen that a newly allocated refcount
block and the allocated data block point to the same area in the image
file, causing data corruption in the long run.
This fixes a bug that became first visible after commit 250196f1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
`hostname -s` may output an errror:
hostname: Name or service not known
This causes all tests to fail for `make check-block`.
Suppress such error messages, letting the tests succeed.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'qemu-img convert -h' advertise that the default cache mode is
'writeback', while in fact it is 'unsafe'.
This patch 1) fix the help manual and 2) let bdrv_close() call bdrv_flush()
2) is needed because some backend storage doesn't have a self-flush
mechanism(for e.g., sheepdog), so we need to call bdrv_flush() to make
sure the image is really writen to the storage instead of hanging around
writeback cache forever.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The do...while loop can never loop, because select will just not return
0 when invoked with infinite timeout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The definition of when qemu_aio_flush should loop is much simpler
than it looks. It just has to call qemu_aio_wait until it makes
no progress and all flush callbacks return false. qemu_aio_wait
is the logical place to tell the caller about this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
posix_aio_read already calls qemu_aio_process_queue, and dually
qemu_aio_process_queue is always followed by a select loop that calls
posix_aio_read.
No races are possible, so there is no need for a separate process_queue
callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED uses vm_clock timers so that images are not touched during and after
migration. This however does not apply to qemu-io and qemu-img.
Treat vm_clock as a synonym for rt_clock there, and enable it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let timers run during aio_read and aio_write commands,
though not during synchronous commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the next patch we want to reenter the coroutine from
block_job_cancel_sync and cancel the timer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Someone forgot something in commit 29c1a730... Documenting the right
return value is not enough, you also need to actually return it in the
code.
This bug sometimes causes error return values even when everything has
succeeded: The new offset of the refcount block is truncated to 32 bits
and interpreted as signed. At least with small cluster sizes it's easy
to get a negative return value this way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If do_alloc_cluster_offset() fails, the error handling code tried to
remove the request from the in-flight queue, to which it wasn't added
yet, resulting in a NULL pointer dereference.
m->nb_clusters really only becomes != 0 when the request is in the list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The IDE PIO write sector code path uses bdrv_write() and hence can make
the guest unresponsive while the I/O request is in progress. This patch
converts ide_sector_write() to use bdrv_aio_writev() by using the
BUSY_STAT bit to tell the guest that the request is in progress.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Tested-by: Richard Davies <richard@arachsys.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The IDE PIO interface currently uses bdrv_read() to perform reads
synchronously. Synchronous I/O in the vcpu thread is bad because it
prevents the guest from executing code - it makes the guest
unresponsive.
This patch converts IDE PIO to use bdrv_aio_readv(). We simply need to
use the BUSY_STAT status so the guest knows to wait while we are busy.
The only external user of ide_sector_read() is restart behavior on I/O
errors and it is not affected by this change. We still need to restart
I/O in the same way.
Migration is also unaffected if I understand the code correctly. We
continue to use the same transfer function and the BUSY_STAT status
should never be migrated since we flush I/O before migrating device
state.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Tested-by: Richard Davies <richard@arachsys.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According comment, we should not read again, we will write.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an AIO request is in flight that refers to a BlockDriverState that
has been closed and possibly even freed, more or less anything could
happen. I have seen segfaults, -EBADF return values and qcow2 sometimes
actually catches the situation in bdrv_close() and abort()s.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If the BlockDriverState is closed/freed without draining the AIO
requests first, the request coroutines may work on invalid data and file
descriptors or have some dangling pointers that cause segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* origin/master:
Allow controlling volume with PulseAudio backend
configure: pa_simple is not needed anymore
Do not use pa_simple PulseAudio API
audio/spice: add support for volume control
hw/ac97: add support for volume control
hw/ac97: the volume mask is not only 0x1f
hw/ac97: remove USE_MIXER code
audio: don't apply volume effect if backend has VOICE_VOLUME_CAP
audio: add VOICE_VOLUME ctl
* kraxel/usb.46: (21 commits)
usb-ehci: drop assert()
usb-redir: Notify our peer when we reject a device due to a speed mismatch
usb-ehci: Drop unused sofv value
usb-host: rewrite usb_linux_update_endp_table
usb: use USBDescriptor for endpoint descriptors.
usb: use USBDescriptor for interface descriptors.
usb: use USBDescriptor for config descriptors.
usb: use USBDescriptor for device qualifier descriptors.
usb: add USBDescriptor, use for device descriptors.
usb-ehci: frindex always is a 14 bits counter
usb-ehci: fix ehci_child_detach
usb-hub: add tracepoints
usb_packet_set_state: handle p->ep == NULL
usb-host: add property to turn off pipelining
usb-host: add usb packet to request tracepoints
usb-host: trace canceled requests
usb-host: trace emulated requests
Add bootindex support to usb-host and usb-redir
usb-uhci: queuing fix
usb-uhci: stop queue filling when we find a in-flight td
...
Notify any listeners such as vnc that the displaysurface has been
changed, otherwise they will segfault when first accessing the freed old
displaysurface data.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The addition of those values caused a regression where not specifying
any value for the vram bar size would result in a 4096 _byte_ surface
area. This is ok for the windows driver but causes the X driver to be
unusable. Also, it's a regression. This patch returns the default
behavior of having a 64 megabyte vram BAR.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The resulting stp file fails to load because of an unresolvable probe.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unfortunately, pa_simple is a limited API which doesn't let us
retrieve the associated pa_stream. It is needed to control the volume
of the stream.
In v4:
- add missing braces
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Use Spice server volume control API when available.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Combine output volume with Master and PCM registers values.
Use default values in mixer_reset ().
Set volume on post-load to update backend values.
v4,v5:
- fix some code style
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
It's a case by case (see Table 66. AC ?97 Baseline Audio Register Map)
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
That code doesn't compile. The interesting bits for volume control are
going to be rewritten in the following patch.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
If the audio backend is capable of volume control, don't apply
software volume (mixeng_volume ()), but instead, rely on backend
volume control. This will allow guest to have full range volume
control.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Add a new PCM control operation to update the stream volume on the
audio backend. The argument given is a SWVoiceOut/SWVoiceIn.
v4:
- verified other backends didn't fail/assert on this new control
they randomly return 0 or -1, but we ignore return value.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Update roms/seabios and pc-bios/bios.bin to the 1.7.0 release.
Most noticable new feature is virtio-scsi support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not sure what the purpose of the assert() was, in any case it is bogous.
We can arrive there if transfer descriptors passed to us from the guest
failed to pass sanity checks, i.e. it is guest-triggerable. We deal
with that case by resetting the host controller. Everything is ok, no
need to throw a core dump here.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
