Commit Graph

302 Commits

Author SHA1 Message Date
Markus Armbruster 6376f95223 blockdev: Plug memory leak in blockdev_init()
blockdev_init() leaks bs_opts when qemu_opts_create() fails, i.e. when
the ID is bad.  Missed in commit ec9c10d.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-30 14:26:54 +02:00
Markus Armbruster b1422f2040 blockdev: Don't use qerror_report() in do_drive_del()
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP.  It should not be used elsewhere.

do_drive_del() is an HMP command that won't be converted to QMP (we'll
create a new QMP command instead).  It uses both qerror_report() and
error_report().  Convert the former to the latter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Markus Armbruster e8817e7b0e blockdev: Don't use qerror_report_err() in drive_init()
qerror_report_err() is a transitional interface to help with
converting existing HMP commands to QMP.  It should not be used
elsewhere.

drive_init() is not meant to be used by QMP commands.  It uses both
qerror_report_err() and error_report().  Convert the former to the
latter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng 628ff68303 block: Move op_blocker check from block_job_create to its caller
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng 3718d8ab65 block: Replace in_use with operation blocker
This drops BlockDriverState.in_use with op_blockers:

  - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).

  - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).

  - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).

    The specific types are used, e.g. in place of starting block backup,
    bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).

    There is one exception in block_job_create, where
    bdrv_op_blocker_is_empty() is used, because we don't know the operation
    type here. This doesn't matter because in a few commits away we will drop
    the check and move it to callers that _do_ know the type.

  - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).

Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Peter Lieven 465bee1da8 block: optimize zero writes with bdrv_write_zeroes
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 13:42:27 +02:00
Peter Lieven 82a402e99f blockdev: add a function to parse enum ids from strings
this adds a generic function to recover the enum id of a parameter
given as a string.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 12:21:17 +02:00
Peter Maydell 13de54eedd Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  monitor: fix qmp_getfd() fd leak in error case
  HMP: support specifying dump format for dump-guest-memory
  HMP: fix doc of dump-guest-memory
  qmp: object-add: Validate class before creating object
  monitor: Add device_add and device_del completion.
  monitor: Add command_completion callback to mon_cmd_t.
  monitor: Fix drive_del id argument type completion.
  error: Remove some unused headers
  qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED
  qerror.h: Remove QERR defines that are only used once
  qerror.h: Remove unused error classes
  error: Print error_report() to stderr if using qmp
  monitor: Remove unused monitor_print_filename
  error: Privatize error_print_loc
  vnc: Remove default_mon usage
  slirp: Remove default_mon usage

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-28 12:56:34 +01:00
Markus Armbruster f70edf9948 blockdev: Clean up fragile use of error_is_set()
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque.  It's wrong when ERRP
may be null, because errors go undetected when it is.  It's fragile
when proving ERRP non-null involves a non-local argument.  Else, it's
unnecessarily opaque (see commit 84d18f0).

The error_is_set(errp) in internal_snapshot_prepare() is merely
fragile, because the caller never passes a null errp argument.

Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 18:05:06 +02:00
Cole Robinson f231b88db1 qerror.h: Remove QERR defines that are only used once
Just hardcode them in the callers

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:59 -04:00
Kevin Wolf f2d953ec31 block: Catch duplicate IDs in bdrv_new()
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.

This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-22 12:00:28 +02:00
Kevin Wolf 98522f63f4 block: Add errp to bdrv_new()
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.

Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-22 12:00:20 +02:00
Max Reitz 5450466394 block-commit: speed is an optional parameter
As speed is an optional parameter for the QMP block-commit command, it
should be set to 0 if not given (as it is undefined if has_speed is
false), that is, the speed should not be limited.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-11 13:59:49 +02:00
Kevin Wolf c6e0bd9b70 blockdev: Fix NULL pointer dereference in blockdev-add
If aio=native, we check that cache.direct is set as well. If however
cache wasn't specified at all, qemu just segfaulted.

The old condition didn't make any sense anyway because it effectively
only checked for the default cache mode case, but not for an explicitly
set cache.direct=off mode.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-06 17:27:28 +01:00
Kevin Wolf 8ae8e904fc blockdev: Fail blockdev-add with encrypted images
Encrypted images need a password before they can be used, and we don't
want blockdev-add to create BDSes that aren't fully initialised. So for
now simply forbid encrypted images; we can come back to it later if we
need the functionality.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-06 17:27:23 +01:00
Max Reitz ddf5636dc9 block: Add reference parameter to bdrv_open()
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:22 +01:00
Max Reitz f67503e5bd block: Change BDS parameter of bdrv_open() to **
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:21 +01:00
Peter Maydell 61e8a92364 QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
 * NAND fix for "info qtree"
 * Cleanup and extension of QOM machine tests
 * IndustryPack test cases and conversion to QOM realize
 * I2C cleanups
 * Cleanups of legacy qdev properties
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTAooJAAoJEPou0S0+fgE/SuQQALW3zvra4ZLRAQV0e8kFoyj1
 vVtmLkDhnCe4cYfxxfOX91NA0rH1ts2EO1+UcnaCHJlptNWfA+8qJW69XgYpHE3c
 DKQlKPL/9pV5ywY5uUw/t1UJHg2BfrLBDDM4lP+vrpwiQYq4kp24JffnhfY3l9MA
 9qdkXu1HrlWoLRVGnMyGDXI8cb+5bTL+FEc6UuHl3P89/gj5BV+LDWn0QOFbAkxq
 4wk+Xh6sHKcfOdq6vMCNGlTjlJnpbY43D1a8+q6hFGG8JBlpne7Oer7bse9k4uTK
 q/CzyNzC0lnjjcULpa4ptRlycH0ruD9DPY7Lco9XqYd3l/c9742PmTEqN5TZseKD
 XD7+hwT1tk7W8rihm8KETCP6sKlXz4w8tJiWe6IT3zwRzvXIolxxK93heQuaX73Z
 HFDmvTPVLUiWF8ftKTyWZM3w+jsbSH0QSrMCIHKJrPTRWTKphx0DUP74lWjNsvGs
 FFBjpAgrflLihxiuRrcLmekGn0xCTjhQWIo2GoiWTgLSEHNQQQUNO+15/kcU/vlI
 hh3DJpiBKeSnUapHHL0OEK6ryeHoG95akiRjImwWVthNLk4KEuWtlhFPYBtulO5A
 PA02trE4Ah769effX0ZYdNl23KbW4VxpZ8VZv+kp7RTrDKxw551HoEFJ5ja0nkvB
 O1CfsE7x0GH/Rbi/Hxhu
 =KRcc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties

# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
  qtest: Include system headers before user headers
  qapi: Refine human printing of sizes
  qdev: Use QAPI type names for properties
  qdev: Add enum property types to QAPI schema
  block: Handle "rechs" and "large" translation options
  qdev: Remove hex8/32/64 property types
  qdev: Remove most legacy printers
  qdev: Use human mode in "info qtree"
  qapi: Add human mode to StringOutputVisitor
  qdev: Inline qdev_prop_parse()
  qdev: Legacy properties are just strings
  qdev: Legacy properties are now read-only
  qdev: Remove legacy parsers for hex8/32/64
  qdev: Sizes are now parsed by StringInputVisitor
  qapi: Add size parser to StringInputVisitor
  qtest: Don't segfault with invalid -qtest option
  ipack: Move IndustryPack out of hw/char/
  ipoctal232: QOM parent field cleanup
  ipack: QOM parent field cleanup for IPackDevice
  ipack: QOM parent field cleanup for IPackBus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 13:05:48 +00:00
Peter Maydell 4c0c9bbe78 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  monitor: Add object_add class argument completion.
  monitor: Add object_del id argument completion.
  monitor: Add device_add device argument completion.
  monitor: Add device_del id argument completion.
  qmp: expose list of supported character device backends
  Use error_is_set() only when necessary
  QMP: allow JSON dict arguments in qmp-shell
  hmp: migrate command (without -d) now blocks correctly

Conflicts:
	blockdev.c

[PMM: resolved trivial conflict in blockdev.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 12:10:23 +00:00
Markus Armbruster 84d18f065f Use error_is_set() only when necessary
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Paolo Bonzini f31c41ff5e block: Handle "rechs" and "large" translation options
Sure, CHS translation is an obscure topic, and legacy options for
hard-disk geometries are obscure as well.  But since QEMU does nothing
with it except telling the BIOS, and since there "large" and "rechs"
are listed in the enums, parsing them seems to be the bare minimum.

Acked-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:12:04 +01:00
Benoît Canet 0c5e94ee83 block: Open by reference will try device then node_name.
Since we introduced node_name for named bs of the graph modify the opening by
reference to use it as a fallback.

This patch also enforce the separation of the device id and graph node
namespaces.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 18:05:39 +01:00
Benoît Canet 57b6bdf37c blockdev: Fix wrong usage of QDECREF causing snapshoted quorum to crash on close.
As bdrv_open() documentation states:
"The reference to the QDict belongs to the block layer
 * after the call (even on failure), so if the caller intends to reuse the
 * dictionary, it needs to use QINCREF() before calling bdrv_open."

the optional options dict will not be reused after bdrv_open() and should
belong to the block layer so remove the extra QDECREF(options).

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 18:05:39 +01:00
Kevin Wolf ee13ed1cbc blockdev: Remove 'type' parameter from blockdev_init()
blockdev-add doesn't know about the device that the backend will be
attached to, this is a legacy -drive concept. Move the remaining checks
that use it to drive_init().

[Fam Zheng <famz@redhat.com> suggested line-wrapping to 80 chars as
required by the coding standard.  I have fixed this.
--Stefan]

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 13:04:56 +01:00
Benoît Canet 0901f67ecd qmp: Allow to take external snapshots on bs graphs node.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet 3b1dbd11a6 qmp: Allow block_resize to manipulate bs graph nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet 212a5a8f09 block: Create authorizations mechanism for external snapshot and resize.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet 12d3ba821d qmp: Allow to change password on named block driver states.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>

There was two candidate ways to implement named node manipulation:

1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
                                      '*node-name': 'str', 'password': 'str'}
}

2)

{ 'command': 'block_passwd', 'data': {'device': 'str',
                                      '*device-is-node': 'bool',
                                      'password': 'str'} }

Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.

Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.

Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.

Kevin argued that all bs are node including devices ones so 2 does not make
sense.

Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.

Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.

A vote has been done on the list to elect the version to use and 1 won.

For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet c13163fba1 qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Max Reitz d095b46533 blockdev: Move "file" to legacy_opts
Specifying the image filename through the "file" option is a legacy
option and should not be supported by blockdev-add (in that case, giving
a string for "file" references an existing block device).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:18 +01:00
Edgar E. Iglesias 133fe77437 Merge remote branch 'luiz/queue/qmp' into qmpq
* luiz/queue/qmp:
  migration: qmp_migrate(): keep working after syntax error
  qerror: Remove assert_no_error()
  qemu-option: Remove qemu_opts_create_nofail
  target-i386: Remove assert_no_error usage
  hw: Remove assert_no_error usages
  qdev: Delete dead code
  error: Add error_abort
  monitor: add object-add (QMP) and object_add (HMP) command
  monitor: add object-del (QMP) and object_del (HMP) command
  qom: catch errors in object_property_add_child
  qom: fix leak for objects created with -object
  rng: initialize file descriptor to -1
  qemu-monitor: HMP cpu-add wrapper
  vl: add missing transition debug->finish_migrate

Message-Id: 1389045795-18706-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-01-14 12:10:08 +10:00
Peter Crosthwaite 87ea75d5e1 qemu-option: Remove qemu_opts_create_nofail
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.

null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 15:02:30 -05:00
Fam Zheng 20a63d2cec commit: Support commit active layer
If active is top, it will be mirrored to base, (with block/mirror.c
code), then the image is switched when user completes the block job.

QMP documentation is updated.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20 16:26:16 +01:00
Marc-André Lureau 314f7ea74f qmp_change_blockdev() remove unused has_format
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16 10:12:20 +01:00
Max Reitz 117e0c8288 block/drive-mirror: Reuse backing HD for sync=none
For "none" sync mode in "absolute-paths" mode, the current image should
be used as the backing file for the newly created image.

The current behavior is:
a) If the image to be mirrored has a backing file, use that (which is
   wrong, since the operations recorded by "none" are applied to the
   image itself, not to its backing file).
b) If the image to be mirrored lacks a backing file, the target doesn't
   have one either (which is not really wrong, but not really right,
   either; "none" records a set of operations executed on the image
   file, therefore having no backing file to apply these operations on
   seems rather pointless).

For a, this is clearly a bugfix. For b, it is still a bugfix, although
it might break existing API - but since that case crashed qemu just
three weeks ago (before 1452686495), we
can safely assume there is no such API relying on that case yet.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-2-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-27 07:53:32 -08:00
Amos Kong 968854c8a1 qmp: access the local QemuOptsLists for drive option
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].

This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14 13:09:07 +01:00
Max Reitz 1452686495 block/drive-mirror: Check for NULL backing_hd
It should be possible to execute the QMP "drive-mirror" command in
"none" sync mode and "absolute-paths" mode even for block devices
lacking a backing file.

"absolute-paths" does in fact not require a backing file to be present,
as can be seen from the "top" sync mode code path. "top" basically
states that the device should indeed have a backing file - however, the
current code catches the case if it doesn't and then simply treats it as
"full" sync mode, creating a target image without a backing file (in
"absolute-paths" mode). Thus, "absolute-paths" does not imply the target
file must indeed have a backing file.

Therefore, the target file may be left unbacked in case of "none" sync
mode as well, if the specified device is not backed either. Currently,
qemu will crash trying to dereference the backing file pointer since it
assumes that it will always be non-NULL in that case ("none" with
"absolute-paths").

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14 13:09:06 +01:00
Stefan Hajnoczi ec9c10d29c blockdev: fix drive_init() opts and bs_opts leaks
These memory leaks also make drive_add if=none,id=drive0 without a file=
option leak the options list.  This keeps ID "drive0" around forever.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-11-07 13:53:31 +01:00
Fam Zheng a7fdbcf0e6 blockdev: fix cdrom read_only flag
Since 0ebd24e0, cdrom doesn't have read-only on by default, which will
error out when using an read only image. Fix it by setting the default
value when parsing opts.

Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Signed-off-by: Fam Zheng <famz@redhat.com>

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-17 10:19:59 +02:00
Kevin Wolf b681072d20 blockdev: blockdev_init() error conversion
This gives us meaningful error messages for the blockdev-add QMP
command.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:02 +02:00
Kevin Wolf 0ebd24e0a2 blockdev: Don't disable COR automatically with blockdev-add
If a read-only device is configured with copy-on-read=on, the old code
only prints a warning and automatically disables copy on read. Make it
a real error for blockdev-add.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:02 +02:00
Kevin Wolf e34ef04641 blockdev: Remove 'media' parameter from blockdev_init()
The remaining users shouldn't be there with blockdev-add and are easy to
move to drive_init().

Bonus bug fix: As a side effect, CD-ROM drives can now use block drivers
on the read-only whitelist without explicitly specifying read-only=on,
even if a format is explicitly specified.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:02 +02:00
Kevin Wolf 4f8a066b5f blockdev: Remove IF_* check for read-only blockdev_init
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.

Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 394c7d4d6b blockdev: Move virtio-blk device creation to drive_init
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 87a899c509 blockdev: Move bus/unit/index processing to drive_init
This requires moving the automatic ID generation at the same time, so
let's do that as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 2692929802 blockdev: Move parsing of 'boot' option to drive_init
It's already ignored and only prints a deprecation message. No use in
making it available in new interfaces.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf b41a7338cf blockdev: Moving parsing of geometry options to drive_init
This moves all of the geometry options (cyls/heads/secs/trans) to
drive_init so that they can only be accessed using legacy functions, but
never with anything blockdev-add related.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 593d464bd4 blockdev: Move parsing of 'if' option to drive_init
It's always IF_NONE for blockdev-add.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 33cb7dc8b7 blockdev: Move parsing of 'media' option to drive_init
This moves as much as possible of the processing of the 'media' option
to drive_init so that it can only be accessed using legacy functions,
but never with anything blockdev-add related.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf f298d07166 blockdev: Pass QDict to blockdev_init()
Working on a QDict instead of a QemuOpts that accepts anything is more
in line with bdrv_open(). A QDict is what qmp_blockdev_add() already has
anyway, so this saves additional conversions. And last, but not least,
it allows later patches to easily extract legacy options into a
separate, typed QemuOpts for drive_init() (the untyped QemuOpts that
drive_init already has doesn't allow access to numbers, only strings,
and is therefore useless without conversion).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 326642bc7f blockdev: Separate ID generation from DriveInfo creation
blockdev-add shouldn't automatically generate IDs, but will keep most of
the DriveInfo creation code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf d26c9a1573 blockdev: 'blockdev-add' QMP command
For examples see the changes to qmp-commands.hx.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 2d246f01d3 blockdev: Introduce DriveInfo.enable_auto_del
BlockDriverStates shouldn't be affected by an unplugged guest device,
except if created with the legacy -drive command line option or the
drive_add HMP command.

Make the automatic deletion as well as cancelling of jobs conditional on
an enable_auto_del boolean that is only set in drive_init().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf 8f94a6e40e block: Improve driver whitelist checks
The main intent of this patch is to consolidate the whitelist checks to
a single point in the code instead of spreading it everywhere. This adds
a nicer error message for read-only whitelisting, too, in places where
it was still missing.

The patch also contains a bonus bug fix: By finding the format first in
bdrv_open() and then independently checking against the whitelist only
later, we avoid the case that use of a non-whitelisted format results in
probing rather than an error message. Previously, this could happen when
using the driver=... option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
2013-10-11 16:50:00 +02:00
Benoît Canet f6186f49e2 block: Add BlockDriver.bdrv_check_ext_snapshot.
This field is used by blkverify to disable external snapshots creation.
It will also be used by block filters like quorum to disable external
snapshot creation.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 16:49:59 +02:00
Stefan Weil 3a6f270326 block: Remove unused assignment (fixes warning from clang)
blockdev.c:1929:13: warning: Value stored to 'ret' is never read
            ret = 0;
            ^     ~

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-02 22:55:28 +04:00
Paolo Bonzini 1df6fa4bc6 blockdev: do not default cache.no-flush to true
That's why all my VMs were so fast lately. :)

This changed in 1.6.0 by mistake in patch 29c4e2b (blockdev: Split up
'cache' option, 2013-07-18).

Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-20 19:27:44 +02:00
Max Reitz aa3fe714f7 block: Assert validity of BdrvActionOps
In qmp_transaction, assert that the BdrvActionOps to be used is actually
valid.

This assertion failing is very improbable, however, it might happen, if
a new TransactionActionKind is introduced "out of order" and the
actions[] array is not updated.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 16:28:36 +02:00
Max Reitz 34b5d2c68e block: Error parameter for open functions
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Wenchao Xia 44e3e053af qmp: add interface blockdev-snapshot-delete-internal-sync
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.

Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia f323bc9e8b qmp: add interface blockdev-snapshot-internal-sync
Snapshot ID can't be specified in this interface.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia bbe860104f qmp: add internal snapshot support in qmp_transaction
Unlike savevm, the qmp_transaction interface will not generate
snapshot name automatically, saving trouble to return information
of the new created snapshot.

Although qcow2 support storing multiple snapshots with same name
but different ID, here it will fail when an snapshot with that name
already exist before the operation. Format such as rbd do not support
ID at all, and in most case, it means trouble to user when he faces
multiple snapshots with same name, so ban that case. Request with
empty name will be rejected.

Snapshot ID can't be specified in this interface.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Fam Zheng fa510ebffa block: use BDS ref for block jobs
Block jobs used drive_get_ref(drive_get_by_blockdev(bs)) to avoid BDS
being deleted. Now we have BDS reference count, and block jobs don't
care about dinfo, so replace them to get cleaner code. It is also the
safe way when BDS has no drive info.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Fam Zheng 4f6fd3491c block: make bdrv_delete() static
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.

This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Benoît Canet 2024c1df43 block: Add iops_size to do the iops accounting for a given io size.
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Benoît Canet 3e9fab690d block: Add support for throttling burst max in QMP and the command line.
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Benoît Canet cc0681c454 block: Enable the new throttling code in the block layer.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Kevin Wolf c0447d870b Revert "block: Disable driver-specific options for 1.6"
This reverts commit 8afaefb891.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-30 15:28:52 +02:00
Alex Bligh bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Fam Zheng 7780d47211 block: better error message for read only format name
When user tries to use read-only whitelist format in the command line
option, failure message was "'foo' invalid format". It might be invalid
only for writable, but valid for read-only, so it is confusing. Give the
user easier to understand information.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 14:30:03 +02:00
M. Mohan Kumar 8b7a5415f9 block: Dont ignore previously set bdrv_flags
bdrv_flags is set by bdrv_parse_discard_flags(), but later it is reset
to zero.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Message-id: 1376483201-13466-1-git-send-email-mohan@in.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-14 08:34:00 -05:00
Mike Qiu 6db5f5d68e block: Bugfix 'format' and 'snapshot' used in drive option
When use -drive file='xxx',format=qcow2,snapshot=on the error
message "Can't use snapshot=on with driver-specific options"
can be show, and fail to start the qemu.

This should not be happened, and there is no file.driver option
in qemu command line.

It is because the commit 74fe54f2a1,
it puts 'driver' option if the command line use 'format' option.

This patch is to solve this bug.

Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-09 19:33:23 +02:00
Kevin Wolf 8afaefb891 block: Disable driver-specific options for 1.6
We don't want to commit to the API yet before everything is worked out.
Like already for 1.5, disable it again for the 1.6 release. This commit
is meant to be reverted after the 1.6 release.

The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-02 18:21:11 +02:00
Stefan Weil dfc6f86567 misc: Use g_assert_not_reached for code which is expected to be unreachable
The macro g_assert_not_reached is a better self documenting replacement
for assert(0) or assert(false).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00
Ian Main fc5d3f8432 Implement sync modes for drive-backup.
This patch adds sync-modes to the drive-backup interface and
implements the FULL, NONE and TOP modes of synchronization.

FULL performs as before copying the entire contents of the drive
while preserving the point-in-time using CoW.
NONE only copies new writes to the target drive.
TOP copies changes to the topmost drive image and preserves the
point-in-time using CoW.

For sync mode TOP are creating a new target image using the same backing
file as the original disk image.  Then any new data that has been laid
on top of it since creation is copied in the main backup_run() loop.
There is an extra check in the 'TOP' case so that we don't bother to copy
all the data of the backing file as it already exists in the target.
This is where the bdrv_co_is_allocated() is used to determine if the
data exists in the topmost layer or below.

Also any new data being written is intercepted via the write_notifier
hook which ends up calling backup_do_cow() to copy old data out before
it gets overwritten.

For mode 'NONE' we create the new target image and only copy in the
original data from the disk image starting from the time the call was
made.  This preserves the point in time data by only copying the parts
that are *going to change* to the target image.  This way we can
reconstruct the final image by checking to see if the given block exists
in the new target image first, and if it does not, you can get it from
the original image.  This is basically an optimization allowing you to
do point-in-time snapshots with low overhead vs the 'FULL' version.

Since there is no old data to copy out the loop in backup_run() for the
NONE case just calls qemu_coroutine_yield() which only wakes up after
an event (usually cancel in this case).  The rest is handled by the
before_write notifier which again calls backup_do_cow() to write out
the old data so it can be preserved.

Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26 22:01:31 +02:00
Kevin Wolf 29c4e2b50d blockdev: Split up 'cache' option
The old 'cache' option really encodes three different boolean flags into
a cache mode name, without providing all combinations. Make them three
separate options instead and translate the old option to the new ones
for drive_init().

The specific boolean options take precedence if the old cache option is
specified as well, so the following options are equivalent:

-drive file=x,cache=none,cache.no-flush=true
-drive file=x,cache.writeback=true,cache.direct=true,cache.no-flush=true

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 22:01:31 +02:00
Kevin Wolf 0f227a9470 blockdev: Rename 'readonly' option to 'read-only'
Option name cleanup before it becomes a QMP API.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 22:01:02 +02:00
Kevin Wolf 57975222b6 blockdev: Rename I/O throttling options for QMP
In QMP, we want to use dashes instead of underscores in QMP argument
names, and use nested options for throttling.

The new option names affect the command line as well, but for
compatibility drive_init() will convert the old option names before
calling into the code that will be shared between -drive and
blockdev-add.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 21:10:11 +02:00
Kevin Wolf 74fe54f2a1 block: Allow "driver" option on the top level
This is traditionally -drive format=..., which is now translated into
the new driver option. This gives us a more consistent way to select the
driver of BlockDriverStates that can be used in QMP context, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26 21:10:11 +02:00
Stefan Hajnoczi b53169eae0 blockdev: add sync mode to drive-backup QMP command
The drive-backup command is similar to the drive-mirror command, except
no guest data written after the command executes gets copied.  Add a
sync mode argument which determines whether the entire disk is copied,
just allocated clusters, or only clusters being written to by the guest.

Currently only sync mode 'full' is supported - it copies the entire disk.
For read-only point-in-time snapshots we may only need sync mode 'none'
since the target can be a qcow2 file using the guest's disk as its
backing file (no need to copy the entire disk).  Finally, sync mode
'top' is useful if we wish to preserve the backing chain.

Note that this patch just adds the sync mode argument to drive-backup.
It does not implement sync modes 'top' or 'none'.  This patch is
necessary so we can add a drive-backup HMP command that behaves like the
existing drive-mirror HMP command and takes a sync mode.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-15 09:49:00 +02:00
Stefan Hajnoczi 78b18b78aa blockdev: add Abort transaction
The Abort action can be used to test QMP 'transaction' failure.  Add it
as the last action to exercise the .abort() and .cleanup() code paths
for all previous actions.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:27 +02:00
Stefan Hajnoczi 3037f36446 blockdev: add DriveBackup transaction
This patch adds a transactional version of the drive-backup QMP command.
It allows atomic snapshots of multiple drives along with automatic
cleanup if there is a failure to start one of the backup jobs.

Note that QMP events are emitted for block job completion/cancellation
and the block job will be listed by query-block-jobs.

@device: the name of the device whose writes should be mirrored.

@target: the target of the new image. If the file exists, or if it
         is a device, the existing file/device will be used as the new
         destination.  If it does not exist, a new file will be created.

@format: #optional the format of the new destination, default is to
         probe if @mode is 'existing', else the format of the source

@mode: #optional whether and how QEMU should create a new image, default is
       'absolute-paths'.

@speed: #optional the maximum speed, in bytes per second

@on-source-error: #optional the action to take on an error on the source,
                  default 'report'.  'stop' and 'enospc' can only be used
                  if the block device supports io-status (see BlockInfo).

@on-target-error: #optional the action to take on an error on the target,
                  default 'report' (no limitations, since this applies to
                  a different block device than @device).

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:27 +02:00
Stefan Hajnoczi f9ea81e825 blockdev: allow BdrvActionOps->commit() to be NULL
Some QMP 'transaction' types don't need to do anything on .commit().
Make .commit() optional just like .abort().

The "drive-backup" action will take advantage of this, it only needs to
cancel the block job on .abort().  Other block job actions will probably
follow the same pattern, so allow .commit() to be NULL.

Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Stefan Hajnoczi ba5d6ab68f blockdev: rename BlkTransactionStates to singular
The QMP 'transaction' command keeps a list of in-flight transactions.
The transaction state structure is called BlkTransactionStates even
though it only deals with a single transaction.  The only plural thing
is the linked list of transaction states.

I find it confusing to call the single structure "States".  This patch
renames it to "State", just like BlockDriverState is singular.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Stefan Hajnoczi 99a9addf56 block: add drive-backup QMP command
@drive-backup

Start a point-in-time copy of a block device to a new destination.  The
status of ongoing drive-backup operations can be checked with
query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
The operation can be stopped before it has completed using the
block-job-cancel command.

@device: the name of the device which should be copied.

@target: the target of the new image. If the file exists, or if it
         is a device, the existing file/device will be used as the new
         destination.  If it does not exist, a new file will be created.

@format: #optional the format of the new destination, default is to
         probe if @mode is 'existing', else the format of the source

@mode: #optional whether and how QEMU should create a new image, default is
       'absolute-paths'.

@speed: #optional the maximum speed, in bytes per second

@on-source-error: #optional the action to take on an error on the source,
                  default 'report'.  'stop' and 'enospc' can only be used
                  if the block device supports io-status (see BlockInfo).

@on-target-error: #optional the action to take on an error on the target,
                  default 'report' (no limitations, since this applies to
                  a different block device than @device).

Note that @on-source-error and @on-target-error only affect background I/O.
If an error occurs during a guest write request, the device's rerror/werror
actions will be used.

Returns: nothing on success
         If @device is not a valid block device, DeviceNotFound

Since 1.6

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Stefan Hajnoczi ac3c5d831a blockdev: use bdrv_getlength() in qmp_drive_mirror()
Use bdrv_getlength() for its byte units and error return instead of
bdrv_get_geometry().

Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Stefan Hajnoczi cb78466ef6 blockdev: drop redundant proto_drv check
It is not necessary to check that we can find a protocol block driver
since we create or open the image file.  This produces the error that we
need anyway.

Besides, the QERR_INVALID_BLOCK_FORMAT is inappropriate since the
protocol is incorrect rather than the format.

Also drop an empty line between bdrv_open() and checking its return
value.  This may be due to copy-pasting from earlier code that performed
other operations before handling errors.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Kevin Wolf 492fdc6fbe Revert "block: Disable driver-specific options for 1.5"
This reverts commit 8ec7d390b0.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-24 10:25:16 +02:00
Luiz Capitulino 0eef407c7b blockdev: use error_setg_file_open()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17 11:01:14 -04:00
Stefan Hajnoczi 293c51a6ee blockdev: reset werror/rerror on drive_del
Paolo Bonzini <pbonzini@redhat.com> suggested the following test case:

1. Launch a guest and wait at the GRUB boot menu:

  qemu-system-x86_64 -enable-kvm -m 1024 \
   -drive if=none,cache=none,file=test.img,id=foo,werror=stop,rerror=stop
   -device virtio-blk-pci,drive=foo,id=virtio0,addr=4

2. Hot unplug the device:

  (qemu) drive_del foo

3. Select the first boot menu entry

Without this patch the guest pauses due to ENOMEDIUM.  The guest is
stuck in a continuous pause loop since the I/O request is retried and
fails immediately again when the guest is resumed.

With this patch the error is reported to the guest.

Note that this scenario actually happens sometimes during libvirt disk
hot unplug, where device_del is followed by drive_del.  I/O may still be
submitted to the drive after drive_del if the guest does not process the
PCI hot unplug notification.

Reported-by: Dafna Ron <dron@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2013-06-05 16:39:59 +02:00
Fam Zheng b64ec4e4ad block: add block driver read only whitelist
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.

Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.

E.g. To include vmdk readonly, and others read+write:
    ./configure --target-list=x86_64-softmmu \
                --block-drv-rw-whitelist=qcow2,raw,file,qed \
                --block-drv-ro-whitelist=vmdk

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04 12:11:58 +02:00
Kevin Wolf c8a83e8500 blockdev: Rename BlockdevAction -> TransactionAction
There's no reason to restrict transactions to operations related to
block devices, so rename the type now before schema introspection stops
us from doing so.

Also change the schema documentation of 'transaction' to not refer to
block devices or snapshots any more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Wenchao Xia ba0c86a34e block: make all steps in qmp_transaction() as callback
Make it easier to add other operations to qmp_transaction() by using
callbacks, with external snapshots serving as an example implementation
of the callbacks.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Wenchao Xia 96b86bf72d block: package rollback code in qmp_transaction()
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Wenchao Xia 3b0047e86a block: package committing code in qmp_transaction()
The code is simply moved into a separate function.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Wenchao Xia e2a31e8798 block: move input parsing code in qmp_transaction()
The code is moved into preparation function, and changed
a bit to tip more clearly what it is doing.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Wenchao Xia 9b9877ee9f block: package preparation code in qmp_transaction()
The code before really committing is moved into a function. Most
code is simply moved from qmp_transaction(), except that on fail it
just returns now. Other code such as input parsing is not touched,
to make it easier in review.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Kevin Wolf 8732901e1b blockdev: Replace "undefined error" in qmp_block_resize
We have an errno value that can be displayed, so we should just do that.
An easy way to reproduce this case is to resize a raw image to a size
that is too large for the host file system.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 10:31:58 +02:00
Kevin Wolf 8ec7d390b0 block: Disable driver-specific options for 1.5
We don't want to commit to the API yet before everything is worked out.
Disable it for the 1.5 release. This commit is meant to be reverted
after the 1.5 release.

The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26 13:26:28 +02:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00