Now that we have 440 TLB emulation, we can also support running the 440EP
CPU target in system emulation mode.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we're exposing a Virtex 440 CPU to the guest despite the fact
that we're telling the guest that we're running on a 440EP one in the
device tree.
So let's better default to a real 440EP to make things synced again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent dtc doesn't compile our dts anymore. Change all hex numbers to have
0x prefixes, indicate the old version and recompile using recent dtc.
This doesn't change any semantics in the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running a 440 target, we currently get invalid irq_num values (-1)
which completely confuse the IRQ setting code.
This is most likely due to the missing qdev conversion.
While this shouldn't happen in the first place and should really rather
be fixed by converting the target, I dislike segfaults. So for now, let's
just print a warning and ignore invalid irq_num values.
Signed-off-by: Alexander Graf <agraf@suse.de>
Back in the day when the bamboo target got introduced, the initial TLB was
dictated by KVM. TCG has been missing initial TLB values ever since, rendering
the target unusable for TCG usage.
This patch adds linear TLB maps the way Linux expects them, making the target
work.
Signed-off-by: Alexander Graf <agraf@suse.de>
To be able to support CPU reset, we need to put all register initialization
and initial state into a CPU reset hook instead of a function that is only
called once on bootup.
This is a preparation step for the initial TLB setting code and brings bamboo
more in line with what e500 and virtex already do.
Signed-off-by: Alexander Graf <agraf@suse.de>
When using TCG with a BookE PowerPC core, we need to explicitly initialize
the BookE timers with the correct frequencies.
This was missing for 440EP, since that code came from KVM and was never used
with TCG.
Signed-off-by: Alexander Graf <agraf@suse.de>
* stefanha/trivial-patches:
Makefile: Remove generated headers on clean
Makefile: Exclude tests/Makefile in unconfigured tree
lm32: Fix mixup of uint32 and uint32_t
tests: Silence gtester in Makefile
qemu-tool: Fix mixup of int64 and int64_t
* pmaydell/arm-devs.for-upstream:
arm: make the number of GIC interrupts configurable
hw/lan9118: Add save/load support
arm: Remove incorrect comment in arm_timer
vexpress, realview: Add (dummy) L2 cache controller
* kraxel/usb.37:
usb-redir: Improve some debugging messages
usb-redir: Try to keep our buffer size near the target size
usb-redir: Pre-fill our isoc input buffer before sending pkts to the host
usb-redir: Dynamically adjust iso buffering size based on ep interval
usb-redir: Clear iso / irq error when stopping the stream
usb: link packets to endpoints not devices
usb: add max_packet_size to USBEndpoint
usb/debug: add usb_ep_dump
usb-desc: USBEndpoint support
usb: add ifnum to USBEndpoint
usb: add USBEndpoint
xhci: Initial xHCI implementation
usb: add audio device model
usb-desc: audio endpoint support
usb: track altsetting in USBDevice
usb: track configuration and interface count in USBDevice.
usb-host: rip out legacy procfs support
Running `make distclean' followed by a new out-of-tree build would fail
due to stale generated QMP headers in the tree.
Commit 611b727374 (Makefile: remove more
generated files on clean) made sure generated sources are removed.
Also remove generated headers introduced in commit
e3193601c8 (qapi: use middle mode in QMP
server).
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Since commit dbfe06c62c (build:
split unit test builds to a separate makefile fragment),
in absence of config-host.mak an undefined $(SRC_PATH) breaks
`make distclean' due to /tests/Makefile not being include'able.
Fix by only including when config-host.mak is present.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit d23948b15a (lm32: add Milkymist
VGAFB support) introduced a stray usage of the softfloat uint32 type.
Use uint32_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This prettifies make output a little by avoiding a very long line.
As gtester prints the checks when they are run, no information is lost.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit cbcfa0418f (link the main loop and
its dependencies into the tools) introduced stray usages of int64.
Use int64_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Let's report specific errors so that management tools and users can
identify the problem.
Two new qerrors are needed:
* QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM
* QERR_DEVICE_IS_READ_ONLY for EACCES
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Over time these must have gotten out of order. Put everything back in
alphabetical order.
This is purely a clean up. In practice nothing depends on the order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We're supposed to keep qerror definitions and table entries in
alphabetical order. In practice this is not checked.
I haven't found a nice way to integrate this into the makefile yet but
we can at least have this script which verifies that qerrors are in
alphabetical order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
New QMP command to change the VNC password.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to
deal with HMP right now like readline support. Export it from the monitor so
we can consume it in hmp.c.
In short time, hmp.c will take over all of the readline bits.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also drops the leftover 'mon' argument.
This is a preparation for the next commits which will port the
eject and change commands to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.
Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current comment says that the arm_timers are restricted to between
32 KHz and 1 MHz, but sp804 TRM does not specify those limits.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the L2 cache controller on the ARM devboards which have one,
since we have a dummy model of it now. Note that the only non-MP board
with an L2x0 is the PB1176, which we don't model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before this patch we would allow the (iso) buffer to grow unlimited
(and it would under certain circumstances) leading to way too high
latencies for iso data streams.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is something which should have been done from the first version of
usb-redir, but wasn't.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note the bufpq_target_size id stored in the endpoint info struct,
even though it only used once. This is done because it will be
referenced from other code in a follow up patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And ignore status messages from the client which arrive after stream
stop (the stream stop send to the client and an error status reported by
the client my cross each other due to network latency).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add USBEndpoint for the control endpoint to USBDevices. Link async
packets to the USBEndpoint instead of the USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Start maintaining endpoint state at USBDevice level. Add USBEndpoint
struct and some helper functions to deal with it. For now it contains
the endpoint type only. Moved over some bits from usb-linux.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
