The BEV flag controls whether the boot exception vector is still
in place when starting a kernel. When cleared the exception vector
at EBASE (or hard coded address of 0x80000000) is used instead.
The early stages of the linux kernel would benefit from BEV still
being set to ensure any faults get handled by the boot rom exception
handlers. This is a moot point for system qemu as there aren't really
any BEV handlers, but there are other good reasons to change this...
The UHI (semi-hosting interface) defines special behaviours depending
on whether an application starts in an environment with BEV set or
cleared. When BEV is set then UHI assumes that a bootloader is
relatively dumb and has no advanced exception handling logic.
However, when BEV is cleared then UHI assumes that the bootloader
has the ability to handle UHI exceptions with its exception handlers
and will unwind and forward UHI SYSCALL exceptions to the exception
vector that was installed prior to running the application.
Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Correct addresses passed around in semihosting to use a data type suitable
for both 32-bit and 64-bit targets.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Version: GnuPG v1
iQEcBAABAgAGBQJVis6zAAoJEJykq7OBq3PIB24H/in+3QORzkisfV4Z3t1AePZj
CZk4ETMKIVpDozD/3FmezqMyj7sMaX4fkBBvwxsaNC3Lvj6evr7b99iU8R20qthk
qhrfSyFsOtG+cx7MpkUpF5lXiQDhuYY1waLbPi9ql4FWyhuFU7wpsyhAJivCcBUr
rUVR+EEZrAutzq1EaY60GJJ3MKkkSVcPNZM+EEtdfMbceKpOGrkZmptUIUw6FWt9
Fs8ZyLI88H2Xny+nzBNB5yjqskI6oGWBzJXRWXeDGBOu9Z+OPQYJWT0ij3mxikju
fWDopvK0HokJPrMM536p8IauzORjOl09O0HYAXGpdpJAOU6il1XcCi6euAFiNOk=
=JjTf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Wed Jun 24 16:37:23 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
net: simplify net_client_init1()
net: drop if expression that is always true
net: raise an error if -net type is invalid
net: replace net_client_init1() netdev whitelist with blacklist
net: add missing "netmap" to host_net_devices[]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJVisx5AAoJEJykq7OBq3PIbasIALJC/7BEyCSEubcjH25CIzao
D20ufmo8/Et6KGuD1r2zdGRXQ79q/SDCGStQK8QEEfvRxPMehngfCUb5aJXkcGbu
/bRIaHh7DFxSiPGJI1/1wwR1MC7tjjR6ZrpSd2OTF0VOZvuXlP3noWpX1eiRAcvu
ekK2vvYtDi03/Xzhbx8MIRSuYPAdh/tXZ3mrDfUQNrtO47QYAxh0C9ABzZVrHJCa
RFCFXPoqZroOcrVe20ZHLt82AUL0H3cfHvF74Z+LbOlPJ7JbP/5+PzLisAqX7VeE
VYvK78mQih41Ww+qYYx4lwhUMUW1fYYnN/MHpdU2LBHcF/tPqxz5kyvQ6GJhD5w=
=rdVl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Wed Jun 24 16:27:53 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
virito-blk: drop duplicate check
qemu-iotests: fix 051.out after qdev error message change
iov: don't touch iov in iov_send_recv()
raw-posix: Introduce hdev_is_sg()
raw-posix: Use DPRINTF for DEBUG_FLOPPY
raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINT
Fix migration in case of scsi-generic
block: Use bdrv_is_sg() everywhere
nvme: Fix memleak in nvme_dma_read_prp
vvfat: add a label option
util/hbitmap: Add an API to reset all set bits in hbitmap
virtio-blk: Use blk_drain() to drain IO requests
block-backend: Introduce blk_drain()
throttle: Check current timers before updating any_timer_armed[]
block: Let bdrv_drain_all() to call aio_poll() for each AioContext
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the union and move the hubport creation into the !is_netdev case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
Both is_netdev and !is_netdev paths already check that
net_client_init_func[opts->kind] is non-NULL so there is no need for the
if statement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
When a -net type is used that was not compiled into the binary there
should be an error message.
Note the special case for -net none, which is a no-op.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
It's cumbersome to keep the whitelist up-to-date. New netdev backends
should most likely be allowed so a blacklist makes more sense than a
whitelist.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
Although hmp-commands.hx lists "netmap" as a valid host_net_add type,
the command rejects it because it's missing from the list.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
in_num = req->elem.in_num, and req->elem.in_num is
checked in line 489, so the check about in_num variable
is superflous, let's drop it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1435138164-11728-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit f006cf7fa9 ("qdev-monitor:
Propagate errors through qdev_device_add()") dropped a meaningless error
message. This change in output caused qemu-iotests 051 to fail:
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
Update 051.out so the test passes again.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1435071369-30936-1-git-send-email-stefanha@redhat.com
*) Do not use AI_ADDRCONFIG on listening sockets, because this flag
makes it impossible to explicitly listen on '127.0.0.1' if no global
ipv4 address is configured additionally, making this a very
uncomfortable option.
*) Add AI_V4MAPPED hint for connecting sockets.
If your system is globally only connected via ipv6 you often still want
to be able to use '127.0.0.1' and 'localhost' (even if localhost doesn't
also have an ipv6 entry).
For example, PVE - unless explicitly asking for insecure mode - uses
ipv4 loopback addresses with QEMU for live migrations tunneled over SSH.
These fail to start because AI_ADDRCONFIG makes getaddrinfo refuse to
work with '127.0.0.1'.
As for the AI_V4MAPPED flag: glibc uses it by default, and providing
non-0 flags removes it. I think it makes sense to use it.
I also want to point out that glibc explicitly sidesteps POSIX standards
when passing 0 as hints by then assuming both AI_V4MAPPED and
AI_ADDRCONFIG (the latter being a rather weird choice IMO), while
according to POSIX.1-2001 it should be assumed 0. (glibc considers its
choice an improvement.)
Since either AI_CANONNAME or AI_PASSIVE are passed in our cases, glibc's
default flags in turn are disabled again unless explicitly added, which
I do with this patch.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cscope and TAGS files work in source directory rather than the build
directory, also, don't ask users to run configure first, because they
may have an out of tree build.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Doesn't appear to make a difference, but let's use it consistently.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recent commit 3751d7c "vl: allow full-blown QemuOpts syntax for
-global" overloaded its existing argument syntax DRIVER.PROP=VALUE
with QemuOpts syntax. Unambigious as long as no DRIVER contains '='.
Its documentation claims that "the two syntaxes are equivalent."
Improve it to spell out how exactly the old syntax gets desugared into
the new one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is an attempt to rearrange configure --help output a bit
and consolidate pairs of --enable/disable into its own section.
After this, help text is easier to sort, manage and read.
More descriptive text can be added as well, since we now have
more space.
While at it, mention en/dis-able-vte.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
libcacard.pc file lists only one package in Requires
field, which is nss, while glib-2.0 is also a requiriment.
Furthermore, for libraries used internally by the library
(this is the way nss and glib are used by libcacard),
Requires.private shold be used instead of Requires.
Fix both issues.
This does not affect linking of qemu because it links
with objects from libcacard directly.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When loading migration fails due to a disagreement about
PCI config data we don't currently get any errors explaining
that was the cause of the problem or which byte in the config
data was at fault.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 72ac97cdfc added two equivalent versions of decimal128Local.h,
one in libdecnumber/dpd/ and another in include/libdecnumber/dpd/.
Being identical by the code, the two files however differs in the
licensing terms. The one in libdecnumber/dpd/ (which is being
removed by this patch) is licensed as GPL3.1 (plus gcc runtime
exception), which, as far as I know, is not compatible with GPL-2.
This file is not used (it is included from
include/libdecnumber/dpd/decimal128.h, so version in include/ is
used).
More, the version in include/ can also be removed, since none
of the 3 defines from that file are actually used by the code.
Even more, one of the defines from there, decimal128SetSign,
is redefined (to equivalent value) in libdecnumber/dpd/decimal128.c,
but again, never used.
What a mess...
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The help text says --extra-ldflags is appended to LDFLAGS so make it so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit c1d322e604.
The original commit fixes a bug when assigning a large number of
devices which require option roms to a guest. (One known
configuration that needs extra memory is having more than 4 emulated
NICs assigned. Three or fewer NICs seems to work without this
functionality.)
However, by unilaterally increasing maxmem, it introduces two
problems.
First, now libxl's calculation of the required maxmem during migration
is broken -- any guest which exercised this functionality will fail on
migration. (Guests which have the default number of devices are not
affected.)
Secondly, it makes it impossible for a higher-level toolstack or
administer to predict how much memory a VM will actually use, making
it much more difficult to effectively use all of the memory on a
machine.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This is done indirectly by adjusting two typedefs and helps emphasizing
that the respective tables aren't supposed to be modified at runtime
(as they may be shared between devices).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Functions setting errno commonly return just -1, which is of no
particular use in the log file.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Expecting the ROM BAR to be written with an all ones value when sizing
the region is wrong - the low bit has another meaning (enable/disable)
and bits 1..10 are reserved. The PCI spec also mandates writing all
ones to just the address portion of the register.
Use suitable constants also for initializing the ROM BAR register field
description.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
The code introduced to address XSA-126 allows simplification of other
code in xen_pt_initfn(): All we need to do is update "cmd" suitably,
as it'll be written back to the host register near the end of the
function anyway.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Until now, an SG device was identified only by checking if its path
started with "/dev/sg". Then, hdev_open() would set the bs->sg flag
accordingly. The patch relies on the actual properties of the device
instead of the specified file path.
To this end, test for an SG device (e.g. /dev/sg0) by ensuring that
all of the following holds:
- The specified file name corresponds to a character device
- The device supports the SG_GET_VERSION_NUM ioctl
- The device supports the SG_GET_SCSI_ID ioctl
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Message-id: 1435056300-14924-6-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Get rid of several #ifdef DEBUG_FLOPPY and substitute them with
DPRINTF.
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-5-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Building the QEMU tools fails if we #define DEBUG_BLOCK inside
block/raw-posix.c. Here instead of adding qemu-log.o in block-obj-y
so that DEBUG_BLOCK_PRINT can be used, we substitute the latter with
a simple DPRINTF() (that does not cause bit-rot).
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-4-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
During migration, QEMU uses fsync()/fdatasync() on the open file
descriptor for read-write block devices to flush data just before
stopping the VM.
However, fsync() on a scsi-generic device returns -EINVAL which
causes the migration to fail. This patch skips flushing data in case
of an SG device, since submitting SCSI commands directly via an SG
character device (e.g. /dev/sg0) bypasses the page cache completely,
anyway.
Note that fsync() not only flushes the page cache but also the disk
cache. The scsi-generic device never sends flushes, and for
migration it assumes that the same SCSI device is used by the
destination host, so it does not issue any SCSI SYNCHRONIZE CACHE
(10) command.
Finally, remove the bdrv_is_sg() test from iscsi_co_flush() since
this is now redundant (we flush the underlying protocol at the end
of bdrv_co_flush() which, with this patch, we never reach).
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-3-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of checking bs->sg use bdrv_is_sg() consistently throughout
the code.
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-2-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Until now the vvfat volume label was hardcoded to be
"QEMU VVFAT", now you can pass a file.label=labelname option
to the -drive to change it.
The FAT structure defines the volume label to be limited to
11 bytes and is filled up spaces when shorter than that. The
trailing spaces however aren't exposed to the user by
operating systems.
[Added missing comment '#' characters in block-core.json to fix build
errors.
--Stefan]
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1434706529-13895-2-git-send-email-w.bumiller@proxmox.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The function bdrv_clear_dirty_bitmap() is updated to use
faster hbitmap_reset_all() call.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 555E868A.60506@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each call of the virtio_blk_reset() function calls blk_drain_all(),
which works for all existing BlockDriverStates, while draining only
one is needed.
This patch replaces blk_drain_all() by blk_drain() in
virtio_blk_reset(). virtio_blk_data_plane_stop() should be called
after draining because it restores vblk->complete_request.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Message-id: 1434537440-28236-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch introduces the blk_drain() function which allows to replace
blk_drain_all() when only one BlockDriverState needs to be drained.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1434537440-28236-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
