Commit Graph

178 Commits

Author SHA1 Message Date
Mark Cave-Ayland a879306ca1 sun4m: don't connect two qemu_irqs directly to the same input
The sun4m board code connects both of the IRQ outputs of each ESCC to the
same slavio input qemu_irq. Connecting two qemu_irqs outputs directly to the
same input is not valid as it produces subtly wrong behaviour (for instance
if both the IRQ lines are high, and then one goes low, the PIC input will see
this as a high-to-low transition even though the second IRQ line should still
be holding it high).

This kind of wiring needs an explicitly created OR gate; add one.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201219111934.5540-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-01-06 11:41:37 +00:00
Peter Maydell 3391953660 hw/sparc: Make grlib-irqmp device handle its own inbound IRQ lines
Currently the GRLIB_IRQMP device is used in one place (the leon3 board),
but instead of the device providing inbound gpio lines for the board
to wire up, the board code itself calls qemu_allocate_irqs() with
the handler function being a set_irq function defined in the code
for the device.

Refactor this into the standard setup of a device having input
gpio lines.

This fixes a trivial Coverity memory leak report (the leon3
board code leaks the IRQ array returned from qemu_allocate_irqs()).

Fixes: Coverity CID 1421922
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201212144134.29594-2-peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-01-06 11:41:37 +00:00
Paolo Bonzini 2c65db5e58 vl: extract softmmu/datadir.c
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:18 -05:00
Paolo Bonzini 377ce9cb0f sparc: remove bios_name
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201026143028.3034018-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:06 -05:00
Mark Cave-Ayland c4210bc17d sparc32-ledma: don't reference nd_table directly within the device
Instead use qdev_set_nic_properties() to configure the on-board NIC at the
sun4m machine level.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200926140216.7368-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-28 07:59:25 +00:00
Mark Cave-Ayland cb0fa36b31 sun4m: use qdev properties instead of legacy m48t59_init() function
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201016182739.22875-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-18 16:21:42 +01:00
Eduardo Habkost 8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Eduardo Habkost 0056d51bf7 esp: Rename ESP_STATE to ESP
Make the type checking macro name consistent with the TYPE_*
constant.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20200902224311.1321159-40-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 13:20:22 -04:00
Eduardo Habkost 8110fa1d94 Use DECLARE_*CHECKER* macros
Generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:27:09 -04:00
Eduardo Habkost db1015e92e Move QOM typedefs and add missing includes
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:26:43 -04:00
Thiago Jung Bauermann 24f675cd3b sparc/sun4m: Use start-powered-off CPUState property
Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.

Now secondary_cpu_reset() becomes equivalent to main_cpu_reset() so rename
the function to sun4m_cpu_reset().

Also remove setting of cs->halted from cpu_devinit(), which seems out of
place when compared to similar code in other architectures (e.g.,
ppce500_init() in hw/ppc/e500.c).

Finally, change creation of CPU object from cpu_create() to object_new()
and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's
not possible to set a property after the object is realized.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-8-bauerman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-08 10:08:43 +10:00
Thiago Jung Bauermann 3d0c102092 sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()
We rely on cpu_common_reset() to set cs->halted to 0, it's redundant to do
it in main_cpu_reset().

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-7-bauerman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-08 10:08:43 +10:00
Peter Maydell dd8014e4e9 ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
 accumulated things.  Highlights are:
 
  * Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
  * Add documentation on the (very confusing) pseries NUMA configuration
  * Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
  * Fix icount for a number of POWER registers
  * Many cleanups to error handling in XIVE code
  * Validate size of -prom-env data
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl87VpwACgkQbDjKyiDZ
 s5LjIxAAs8YAQe3uDRz1Wb9GftoMmEHdq7JQoO0FbXDQIVXzpTAXmFLSBtCWKl6p
 O1MEIy/o48b5ORXJqSDSA5LgxbHxYfHdIPEY5Tbn/TGvTvKyCukx9n11milUG8In
 JxRrOTQBnQAAHkLoyuZyrWKOauC0N1scNrnX9Geuid13GcmqHg1d2alXAUu8jEeC
 HSiVmtMqqyyqTx2xA4vfhaGuuwTthnKNfbGdg9ksVqBsCW+etn6ZKGImt8hBe3qO
 5iqbQZvFbkpzgbjkhDzUDM6tmUAFN55y/Y+y7I8Tz4/IX7d3WbdqpplwrXXVWkpq
 2gcBBjQ/9a1hPTBRVN9jn4CvHfhILBfeHIElUiLpSTQZQQALymTnnI2pLCgKoEFX
 LcchXbjiX+pZ2OJnAijpwBcknjgT2U/ZNyiqHJfSQ6jzlYx1YtUf4xGUsgloSiK8
 9QDK8o2k0Cm8Be+lPMBMmTctoi8bq+8SN5UUF710WQL235J58o9+z1vuGO2HVk3x
 flBtv/+B890wcCDpGU80DPs/LSzR0xTTbA5JsWft2fvO569mda0MoWkJH5w6jvSc
 ZLYqljCzFCVW+tKiGHzaBalJaMwn0+QMDTsxzP3yTt5LmmEeRXpBELgvrW64IobD
 xBeryH3nG4SwxFSJq+4ATfvUzjy/Eo58lTTl6c53Ji8/D3aFwsA=
 =L9Wi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging

ppc patch queue 2020-08-18

Here's my first pull request for qemu-5.2, which has quite a few
accumulated things.  Highlights are:

 * Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
 * Add documentation on the (very confusing) pseries NUMA configuration
 * Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
 * Fix icount for a number of POWER registers
 * Many cleanups to error handling in XIVE code
 * Validate size of -prom-env data

# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
  spapr/xive: Use xive_source_esb_len()
  nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
  spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
  ppc/xive: Simplify error handling in xive_tctx_realize()
  spapr/xive: Simplify error handling in kvmppc_xive_connect()
  ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
  spapr/xive: Fix error handling in kvmppc_xive_post_load()
  spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
  spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
  spapr/xive: Rework error handling in kvmppc_xive_get_queues()
  spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
  spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
  spapr/xive: Rework error handling of kvmppc_xive_mmap()
  spapr/xive: Rework error handling of kvmppc_xive_source_reset()
  spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
  spapr: Simplify error handling in spapr_phb_realize()
  spapr/xive: Convert KVM device fd checks to assert()
  ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
  ppc/xive: Rework setup of XiveSource::esb_mmio
  target/ppc: Integrate icount to purr, vtb, and tbu40
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 09:35:21 +01:00
Marc-André Lureau 2c44220d05 meson: convert hw/arch*
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up
from there when building the per-emulator static_library.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:33 -04:00
Paolo Bonzini 243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Greg Kurz 37035df51e nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
Since commit 61f20b9dc5 ("spapr_nvram: Pre-initialize the NVRAM to
support the -prom-env parameter"), pseries machines can pre-initialize
the "system" partition in the NVRAM with the data passed to all -prom-env
parameters on the QEMU command line.

In this case it is assumed that all the data fits in 64 KiB, but the user
can easily pass more and crash QEMU:

$ qemu-system-ppc64 -M pseries $(for ((x=0;x<128;x++)); do \
  echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \
  done) # this requires ~128 Kib
malloc(): corrupted top size
Aborted (core dumped)

This happens because we don't check if all the prom-env data fits in
the NVRAM and chrp_nvram_set_var() happily memcpy() it passed the
buffer.

This crash affects basically all ppc/ppc64 machine types that use -prom-env:
- pseries (all versions)
- g3beige
- mac99

and also sparc/sparc64 machine types:
- LX
- SPARCClassic
- SPARCbook
- SS-10
- SS-20
- SS-4
- SS-5
- SS-600MP
- Voyager
- sun4u
- sun4v

Add a max_len argument to chrp_nvram_create_system_partition() so that
it can check the available size before writing to memory.

Since NVRAM is populated at machine init, it seems reasonable to consider
this error as fatal. So, instead of reporting an error when we detect that
the NVRAM is too small and adapt all machine types to handle it, we simply
exit QEMU in all cases. This is still better than crashing. If someone
wants another behavior, I guess this can be reworked later.

Tested with:

$ yes q | \
  (for arch in ppc ppc64 sparc sparc64; do \
       echo == $arch ==; \
       qemu=${arch}-softmmu/qemu-system-$arch; \
       for mach in $($qemu -M help | awk '! /^Supported/ { print $1 }'); do \
           echo $mach; \
           $qemu -M $mach -monitor stdio -nodefaults -nographic \
           $(for ((x=0;x<128;x++)); do \
                 echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \
             done) >/dev/null; \
        done; echo; \
   done)

Without the patch, affected machine types cause QEMU to report some
memory corruption and crash:

malloc(): corrupted top size

free(): invalid size

*** stack smashing detected ***: terminated

With the patch, QEMU prints the following message and exits:

NVRAM is too small. Try to pass less data to -prom-env

It seems that the conditions for the crash have always existed, but it
affects pseries, the machine type I care for, since commit 61f20b9dc5
only.

Fixes: 61f20b9dc5 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter")
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1867739
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159736033937.350502.12402444542194031035.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-14 13:34:31 +10:00
Markus Armbruster 5325cc34a2 qom: Put name parameter before value / visitor parameter
The object_property_set_FOO() setters take property name and value in
an unusual order:

    void object_property_set_FOO(Object *obj, FOO_TYPE value,
                                 const char *name, Error **errp)

Having to pass value before name feels grating.  Swap them.

Same for object_property_set(), object_property_get(), and
object_property_parse().

Convert callers with this Coccinelle script:

    @@
    identifier fun = {
        object_property_get, object_property_parse, object_property_set_str,
        object_property_set_link, object_property_set_bool,
        object_property_set_int, object_property_set_uint, object_property_set,
        object_property_set_qobject
    };
    expression obj, v, name, errp;
    @@
    -    fun(obj, v, name, errp)
    +    fun(obj, name, v, errp)

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Convert that one manually.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually.  The other files using RXCPU that way don't need
conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
2020-07-10 15:18:08 +02:00
Markus Armbruster 3c6ef471ee sysbus: Convert to sysbus_realize() etc. with Coccinelle
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle script:

    @@
    expression dev, errp;
    @@
    -    qdev_realize(DEVICE(dev), NULL, errp);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), errp);

    @@
    expression sysbus_dev, dev, errp;
    @@
    +    sysbus_dev = SYS_BUS_DEVICE(dev);
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);
    -    sysbus_dev = SYS_BUS_DEVICE(dev);

    @@
    expression sysbus_dev, dev, errp;
    expression expr;
    @@
         sysbus_dev = SYS_BUS_DEVICE(dev);
         ... when != dev = expr;
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(DEVICE(dev), NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

Whitespace changes minimized manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:05:28 +02:00
Markus Armbruster df70796916 qdev: Convert uses of qdev_create() manually
Same transformation as in the previous commit.  Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15 22:05:08 +02:00
Markus Armbruster 3e80f6902c qdev: Convert uses of qdev_create() with Coccinelle
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion.  More to come in
this series.

Coccinelle script:

    @ depends on !(file in "hw/arm/highbank.c")@
    expression bus, type_name, dev, expr;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr;
    identifier DOWN;
    @@
    -    dev = DOWN(qdev_create(bus, type_name));
    +    dev = DOWN(qdev_new(type_name));
         ... when != dev = expr
    -    qdev_init_nofail(DEVICE(dev));
    +    qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);

    @@
    expression bus, type_name, expr;
    identifier dev;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr, errp;
    symbol true;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

    @@
    expression bus, type_name, expr, errp;
    identifier dev;
    symbol true;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name.  Covered by the
next commit's manual conversions.

Missing #include "qapi/error.h" added manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:00:10 +02:00
Markus Armbruster d6b78ac8ec sparc/leon3: Fix to put grlib,* devices on sysbus
leon3_generic_hw_init() creates a "grlib,ahbpnp" and a "grlib,apbpnp"
sysbus device in a way that leaves them unplugged.

Create them the common way that puts them into the main system bus.
Affects machine leon3_generic.  Visible in "info qtree":

     bus: main-system-bus
       type System
    +  dev: grlib,ahbpnp, id ""
    +    mmio 00000000fffff000/0000000000001000
    +  dev: grlib,apbpnp, id ""
    +    mmio 00000000800ff000/0000000000001000
       dev: grlib,irqmp, id ""

Cc: Fabien Chouteau <chouteau@adacore.com>
Cc: KONRAD Frederic <frederic.konrad@adacore.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609122339.937862-22-armbru@redhat.com>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2020-06-15 21:36:21 +02:00
Philippe Mathieu-Daudé acd2a001e0 hw/sparc/leon3: Map the UART device unconditionally
The UART is present on the chipset regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200608172144.20461-2-f4bug@amsat.org>
2020-06-09 09:21:10 +02:00
Philippe Mathieu-Daudé 28c78fe818 hw/misc/empty_slot: Name the slots when created
Directly set the slot name when creating the device,
to display the device name in trace events.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-8-f4bug@amsat.org>
2020-06-09 06:59:44 +02:00
Philippe Mathieu-Daudé 6007523a80 hw/misc/empty_slot: Move the 'hw/misc' and cover in MAINTAINERS
Add an entry for the 'empty_slot' device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-7-f4bug@amsat.org>
2020-06-09 06:59:44 +02:00
Philippe Mathieu-Daudé 077f0f3dad hw/sparc/sun4m: Use UnimplementedDevice for I/O devices
These devices are not slots on a bus, but real I/O devices
that we do not implement. As the ISDN ROM would be a ROMD
device, also model it as UnimplementedDevice.

Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <20200510152840.13558-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-09 06:59:34 +02:00
Markus Armbruster d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Markus Armbruster 7eecec7d12 qom: Drop object_property_set_description() parameter @errp
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.

There are 85 calls of object_property_set_description() and
object_class_property_set_description().  None of them can fail:

* 84 immediately follow the creation of the property.

* The one in spapr_rng_instance_init() refers to a property created in
  spapr_rng_class_init(), from spapr_rng_properties[].

Every one of them still gets to decide what to pass for @errp.

51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal.  I'm actually surprised none of them violates the Error
API.

What are we gaining by letting callers handle the "property not found"
error?  Use when the property is not known to exist is simpler: you
don't have to guard the call with a check.  We haven't found such a
use in 5+ years.  Until we do, let's make life a bit simpler and drop
the @errp parameter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
2020-05-15 07:06:49 +02:00
Philippe Mathieu-Daudé ec7b217510 hw/sparc: Use memory_region_init_rom() with read-only regions
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17 15:18:48 +01:00
Philippe Mathieu-Daudé ea0ac7f6f8 hw: Make MachineClass::is_default a boolean type
There's no good reason for it to be type int, change it to bool.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200207161948.15972-3-philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-02-28 14:57:19 -05:00
Igor Mammedov b2554752b1 sparc/sun4m: use memdev for RAM
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
  MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.

Patch moves ram size check into sun4m_hw_init() and drops
ram_init() moving remainder to sun4m_hw_init() as well,
as it was the only place that called it.

Also it rewrites impl. of RamDevice a little bit, which
could serve as an example of frontend device for RAM backend.
(Caveats are:
  1. it doesn't check for memdev backend being mapped
     since it's been  usurped by generic machine to handle
     majority of machines which don't have RAM frontend device
  2. it still lacks 'addr' property and still has hardcoded
     sysbus_mmio_map() in board init. If done right, board should
     set 'addr' property and bus/machine plug handler should map
     it during device realize time.
)
Further improvements were left as exercise for the future,
since frontends are out scope of RAM conversion to memdev.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-71-imammedo@redhat.com>
2020-02-19 16:50:01 +00:00
Igor Mammedov fe3e7b71e6 sparc/leon3: use memdev for RAM
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
  MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-70-imammedo@redhat.com>
2020-02-19 16:50:01 +00:00
Aleksandar Markovic 6cdda0ff4b hw/core/loader: Let load_elf() populate a field with CPU-specific flags
While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:

  - load_elf()
  - load_elf_as()
  - load_elf_ram()
  - load_elf_ram_sym()

The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.

CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>

Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-29 19:28:52 +01:00
Marc-André Lureau 4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Peter Maydell b952544fe8 * Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
 * Cooperlake CPU model fixes (Xiaoyao)
 * i386 gdb fix (mkdolata)
 * IOEventHandler cleanup (Philippe)
 * icount fix (Pavel)
 * RR support for random number sources (Pavel)
 * Kconfig fixes (Philippe)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
 LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
 hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
 HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
 W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
 irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
 =48jx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)

# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (38 commits)
  chardev: Use QEMUChrEvent enum in IOEventHandler typedef
  chardev: use QEMUChrEvent instead of int
  chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
  monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
  monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
  virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
  vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
  vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
  vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
  ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
  hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
  hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
  hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
  hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
  hw/ipmi: Remove unnecessary declarations
  target/i386: Add missed features to Cooperlake CPU model
  target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
  target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
  hw/rtc/mc146818: Add missing dependency on ISA Bus
  hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-10 17:16:49 +00:00
Marc-André Lureau e23ae617f6 leon3: use qdev gpio facilities for the PIL
As Peter Maydell once said:
"Creating a gpio pin on some object that isn't yourself
looks a bit odd, but all this leon3 code is modifying
the CPU object from the outside anyway. Someday we might
tidy it up, but not today."

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-07 17:24:29 +04:00
Marc-André Lureau ab4c072d2f leon3: use qemu_irq framework instead of callback as property
"set_pin_in" property is used to define a callback mechanism where the
device says "call the callback function, passing it an opaque cookie
and a 32-bit value". We already have a generic mechanism for doing
that, which is the qemu_irq. So we should just use that.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
2020-01-07 17:24:29 +04:00
Philippe Mathieu-Daudé 7bebc358df hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
Only the OpenBIOS and SLOF firmwares use the CHRP NVRAM layout.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191231183216.6781-14-philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07 12:08:39 +01:00
Philippe Mathieu-Daudé 819ce6b2a5 hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory
The M48T59 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24 20:20:45 +02:00
Markus Armbruster 54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster 650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Like Xu 33decbd2d3 hw: Replace global smp variables with MachineState for all remaining archs
The global smp variables in alpha/hppa/mips/openrisc/sparc*/xtensa codes
are replaced with smp properties from MachineState.

A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-10-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Mark Cave-Ayland fcd23a6787 sun4m: set default display type to TCX
Commit 6807874d55 "sun4m: obey -vga none" changed the sun4m machines so that
they could be started without a framebuffer installed, but as no default
display type was configured the machines would start in headless mode without
an explict -vga option.

Set the default display type for all sun4m machines to TCX so that they will
start with a framebuffer if one is not specifically requested.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-07-02 22:49:08 +01:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Richard Henderson 5a59fbce91 target/sparc: Use env_cpu, env_archcpu
Cleanup in the boilerplate that each target must define.
Replace sparc_env_get_cpu with env_archcpu.  The combination
CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Philippe Mathieu-Daudé d5a42d1942 hw/sparc: Implement fw_cfg_arch_key_name()
Implement fw_cfg_arch_key_name(), which returns the name of a
sparc32-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-7-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-23 14:10:31 +02:00
Peter Maydell 27cb89d1d3 Mostly bugfixes and cleanups, the most important being
"megasas: fix mapped frame size" from Peter Lieven.
 In addition, -realtime is marked as deprecated.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJc3rY3AAoJEL/70l94x66D91kH/21LLnL+sKmyueSM/Sek4id2
 r06tHdGMdl5Od3I5uMD9gnr4AriiCZc9ybQDQ1N879wKMmQPZwcnf2GJ5DZ0wa3L
 jHoQO07Bg0KZGWALjXiN5PWB0DlJtXsTm0C4q4tnt6V/ueasjxouBk9/fRLRc09n
 QTS379X9QvPElFTv3WPfGz6kmkLq8VMmdRnSlXneB9xTyXXJbFj3zlvDCElNSgWh
 fZ7gnfYWB1LOC19HJxp1mJSkAUD5AgImYEK1Hmnr+BMs2sg6gypYNtp3LtE5FzmZ
 HSdXYFyPkQV9UyTiV1XBs3bXJbGYj5OApfXCtwo/I2JtP+LhHBA2eq1Gs3QgP98=
 =zSSj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Mostly bugfixes and cleanups, the most important being
"megasas: fix mapped frame size" from Peter Lieven.
In addition, -realtime is marked as deprecated.

# gpg: Signature made Fri 17 May 2019 14:25:11 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (21 commits)
  hw/net/ne2000: Extract the PCI device from the chipset common code
  hw/char: Move multi-serial devices into separate file
  ioapic: allow buggy guests mishandling level-triggered interrupts to make progress
  build: don't build hardware objects with linux-user
  build: chardev is only needed for softmmu targets
  configure: qemu-ga is only needed with softmmu targets
  build: replace GENERATED_FILES by generated-files-y
  trace: only include trace-event-subdirs when they are needed
  sun4m: obey -vga none
  mips-fulong2e: obey -vga none
  hw/i386/acpi: Assert a pointer is not null BEFORE using it
  hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity
  hw/acpi/piix4: Move TYPE_PIIX4_PM to a public header
  memory: correct the comment to DIRTY_MEMORY_MIGRATION
  vl: fix -sandbox parsing crash when seccomp support is disabled
  hvf: Add missing break statement
  megasas: fix mapped frame size
  vl: Add missing descriptions to the VGA adapters list
  Declare -realtime as deprecated
  roms: assert if max rom size is less than the used size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-17 16:17:34 +01:00