Code grew a bit, had to disable CONFIG_USB_UAS to make the
bios for the old machine types continue top fit into 128k.
git shortlog since 1.7.4:
Eric Northup (2):
init_virtio_blk, init_virtio_scsi: reset HBA on error
vp_init_simple: enable PCI bus-mastering before relying on DMA.
Gabriel L. Somlo (1):
SMBIOS: Check for aggregate tables & entry point in fw_cfg
Gerd Hoffmann (4):
smbios: catch zero-length strings
pci: improve io address space allocation
xhci: allocate scratch pad buffers
vga: rework bar detection, add virtio-vga
Johannes Krampf (5):
build: Remove unneccesary semicolons from acpi_extract scripts.
build: Make print statements in scripts python3 compatible.
build: Be explicit that we want integers when dividing for python3 compat.
build: Avoid sort() on unordered classes for python3 compatibility.
build: Be careful with unicode and byte strings for python3 compatibility.
Kevin O'Connor (79):
build: Don't trash the .config file when src/Kconfig changes.
Remove the pmm handle argument from _malloc().
Clear the total block transfer count on error.
Remove unnecesary updates of the disk op->count field.
Always perform thread cleanup on MainThread stack.
pvscsi: Don't store reference to struct pci_device.
pvscsi: Always run entirely in 32bit mode.
pvscsi: Remove use of LOWFLAT and GLOBALFLAT macros.
usb: Replace EHCI to UHCI/OHCI synchronization with new scheme.
Minor - pciinit.c - order header files and use static on local functions.
Minor - fix misspelling in romfile.c comment.
ehci: memset the qTD structures in ehci_alloc_intr_pipe
build: Update kconfig to version in Linux 3.13.
scripts: Allow encodeint.py to take integers in hex notation.
coreboot: Support alternative locations for CBFS.
debug: Add runtime option to not report the debug serial port to the OS.
debug: Only call serial_debug_preinit() at startup.
debug: Unify the SeaBIOS debug version banner.
xhci: Use 64bit writes to ERDP register.
xhci: Fix incorrect direction setting on status transmissions.
xhci: Set the interval parameter on interrupt pipes.
xhci: Verify PAGESIZE register before initializing driver.
xhci: Allocate and free the xhci inctx structure on each use.
xhci: Move set_address code from xhci_control to xhci_alloc_pipe.
xhci: Eliminate 'struct xhci_device'.
xhci: Support xhci controllers with 64 byte contexts.
xhci: Allow the XHCI USB controller to be enabled for coreboot.
xhci: Don't use a dummy endpoint count in configure command.
xhci: Report the "protocol defined" and PSIC bits of extended capabilities.
xhci: Support USB hubs on xhci controllers.
Add call32_params() helper function.
Add space between DTYPE_* definitions.
xhci: Run the XHCI driver entirely in 32bit mode.
Remove pci_writel() and pci_readl() functions.
xhci: Check if scratch pad allocation fails.
Increase maximum size of permanent high memory area.
usb: USB 3 devices encode bMaxPacketSize0 field.
usb: Move default pipe max packet size code from xhci to main code.
xhci: Use the same endpoint initialization code in xhci_alloc_pipe()
xhci: Add copyright notice to usb-xhci.c
vgabios: Make sure exported structs use PACKED.
vgabios: Simplify the bios save state area.
vgabios: Simplify save/restore mechanism.
vgabios: Attempt to detect old x86emu and force a fault.
vgabios: Don't interpret TAB character.
vgabios: Refactor write_teletype and write_chars.
vgabios: Make sure stdvga_list_modes() doesn't overrun the buffer.
coreboot: Add support for a "links" file to have aliases in CBFS.
Enhance nullTrailingSpace() so that it can also skip leading spaces.
coreboot: Move links file processing to its own function.
vgabios: Fix PMM allocation request size.
smbios: Default all values to zero.
usb: Only disable HID devices if both USB_MOUSE and USB_KEYBOARD are off.
Minor - fix some typos in comments.
Replace CONFIG_THREAD_OPTIONROMS with a runtime config setting.
acpi: Move acpi parsing logic from acpi.c to biostables.c / paravirt.c.
smbios: Move smbios parsing logic from smbios.c to biostables.c.
Move PirAddr definition from pirtable.c to biostables.c.
Use biostables.c for copying bios tables even when generating them.
Document no new changes to pirtable.c, mptable.c, acpi.c, and smbios.c.
apm: Remove old Bochs mechanism for shutdown/suspend/standby.
Minor - remove unused includes from pci.c.
vgabios: Add option to control use of standard VGA IO ports.
vgabios: Split vgafb_scroll() into separate move and clear functions.
vgabios: Rewrite vgafb.c graphics operations to set of 4 standard operators.
vgabios: Introduce text_address().
vgabios: Add support for manipulating framebuffers in high memory.
Set the color attribute when calling vgabios print character.
vgabios: PMM scan was incorrectly depending on a zero %ds segment.
coreboot: Make coreboot table searching available to other code.
vgabios: Initial support for coreboot native vga vgabios.
Minor - replace some tab characters that slipped into the code.
Factor out smbios table walking from display_uuid to smbios_next().
vgabios: Define PlatformRunningOn to make compile happy.
If an int 1587 call is made from an option rom, stay in bigreal mode.
xhci: Use msleep() instead of mdelay() for port status delay.
build: Make sure romlayout.o is recompiled on Kconfig change.
Fix int 1589 calls when CONFIG_ENTRY_EXTRASTACK is enabled.
acpi: Fix acpi dsdt compile warning.
Laszlo Ersek (1):
init_virtio_scsi(): reset the HBA before freeing its virtio ring
Marcel Apfelbaum (3):
resume: restore piix pm config registers after resume
hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
hw/pci: check if pci2pci bridges implement optional limit registers
Roger Pau Monne (1):
ld: don't hardcode "-melf_i386"
Sander Eikelenboom (1):
Prevent build failure by not splitting line in the middle of arguments to checkrom.py script
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We got the wrong version of stl_p, the one that bswaps as appropriate
for the target. Since x86 is always little-endian, the "_le_" routine
will resolve to what we want.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Commit e586822a5 broke the bsd-user build when it removed the
CONFIG_UNAME_RELEASE define but forgot to remove the use of it
in bsd-user. Fix this in the simplest possible way (bsd-user
doesn't make any use at all of the qemu_uname_release variable
except to allow it to be pointlessly set by the user, so this
is all we need to do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1399648001-20980-1-git-send-email-peter.maydell@linaro.org
* remotes/bonzini/configure:
libcacard: remove libcacard-specific CFLAGS and LIBS from global vars
build: simplify and fix fix-obj-vars
build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax
build: add support for per-object -cflags and -libs to all rules
Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG)
Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL)
Makefile: strip tools and modules too
build: simplify Makefile.target around unnest-vars invocations
build: simplify Makefile.target a bit, use just one rule for softmmu
build: Fix per-object variables for Makefile.target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTbSUxAAoJEJykq7OBq3PIh+EH/1pfLspteDS4hlTZZ8D5r+iN
AEmemUQpMDGawLHQSJcK3xgNWSz5ei3HxLuXz9+5f3ZhP+ECsrTnf+60uzHkdd6j
axG1viAHEBtX0ZumTdo0XY6FtCZmCRqRz8nfqxs1Q3O7UtZaDqLf1m/BNguw5K8G
VHtuPAVidTWcS6QT6CoEdJ4coA3F8ZuK1viTU2nsBE28lqB99ZG9Zkr2pOCXXra2
5d6OIZYyc+PNW2HuNZTmma41aVoYJnT797qr2cLbZ3q38ykwmWU6cNrLsf+O91yT
wnsCG6g1MdQb9mwVp0spPU/X/IuKbRg449XOzY9Ko4HmuSn1Inf6gUIBMigecjQ=
=wmRq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 09 May 2014 19:57:53 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
glib: fix g_poll early timeout on windows
block: qemu-iotests - test for live migration
block: qemu-iotests - update 085 to use common.qemu
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests
block/raw-posix: Try both FIEMAP and SEEK_HOLE
gluster: Correctly propagate errors when volume isn't accessible
vl.c: remove init_clocks call from main
block: Fix open flags with BDRV_O_SNAPSHOT
qemu-iotests: Test converting to streamOptimized from small cluster size
vmdk: Implement .bdrv_get_info()
vmdk: Implement .bdrv_write_compressed
qemu-img: Convert by cluster size if target is compressed
block/iscsi: bump year in copyright notice
block/nfs: Check for NULL server part
qemu-img: sort block formats in help message
iotests: Use configured python
qcow2: Fix alloc_clusters_noref() overflow detection
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There was some modulo logic to ensure that Microblaze always booted into
physical RAM regardless of the elf entry. Removed it, as QEMU should fail
gracefully when given a bad elf, rather than attempt to run it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The TCSR register has only 11 valid bits. This is now used by the
linux kernel to auto-detect endianness, and causes Linux 3.15-rc1
and later to hang when run under qemu-microblaze. Mask valid bits
before writing the register to solve the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The MER register only has two valid bits. This is now used by
the linux kernel to auto-detect endianness, and causes Linux 3.15-rc1
and later to hang when run under qemu-microblaze. Mask valid bits before
writing the register to solve the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
[Edgar: Untabified]
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The INDEX_op_call case has just been obsoleted; the mov and movi
cases have not been reachable for years. Attempt to document this
both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT.
Because of the TCG_OPF_NOT_PRESENT change, this must be done for
all targets in a single commit.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The move opcodes are special in that their constraints must cover
all available registers. So instead of checking the constraints,
just use the available registers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoid allocating a tcg temporary to hold the constant address,
and instead place it directly into the op_call arguments.
At the same time, convert to the newly introduced tcg_out_call
backend function, rather than invoking tcg_out_op for the call.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that all backends do define TCG_TARGET_INSN_UNIT_SIZE,
remove the fallback definition.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using a 16-byte aligned structure achieves best results, both for code
cleanliness and compiled code size. However, this means that we can't
use the trick of encoding the slot number into the low 2 bits.
Thankfully, we only ever use slot2, so make that explicit in the names
of the relocation functions, and drop the code for other slots.
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
To be defined by the tcg backend based on the elemental unit of the ISA.
During the transition, allow TCG_TARGET_INSN_UNIT_SIZE to be undefined,
which allows us to default tcg_insn_unit to the current uint8_t.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
To avoid C undefined behaviour when patching generated code,
provide wrappers tcg_patch8/16/32/64 which use the usual memcpy
trick, and use them in the i386 backend.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoid stores to unaligned addresses in TCG code generation, by using the
usual memcpy() approach. (Using bswap.h would drag a lot of QEMU baggage
into TCG, so it's simpler just to do direct memcpy() here.)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The code which patches x86 jump instructions assumes it can do an
unaligned write of a uint32_t. This is actually safe on x86, but it's
still undefined behaviour. We have infrastructure for doing efficient
unaligned accesses which doesn't engage in undefined behaviour, so
use it.
This is technically fractionally less efficient, at least with gcc 4.6;
instead of one instruction:
7b2: 89 3e mov %edi,(%rsi)
we get an extra spurious store to the stack slot:
7b2: 89 7c 24 64 mov %edi,0x64(%rsp)
7b6: 89 3e mov %edi,(%rsi)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Currently all what's needed for single file libcacard/vcard_emul_nss.c
(libnss cflags) and hw/usb/ccid-card-emulated.c (libcacard includes)
together with the libs is added to global QEMU_CFLAGS and libs_softmmu.
Use the cflags only where really used (for two mentioned files), and
libs only where needed.
While at it, rename variables to better reflect reality: libcacard_*
is really nss_*.
This needs a bit more tweaking: $(NSS_LIBS) should not contain $glib_libs
(ditto for _cflags). But in order to fix it, some more preparations
should be made first. So add a FIXME comment.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fix-obj-vars has the undesired side effect of breaking -cflags
-objs and -libs variables in the toplevel Makefile.objs. The
variables in the toplevel Makefile.objs do not need any fix,
so fix-obj-vars need not do anything.
Since we are touching it, remove the now unnecessary $(if)
in the callers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_poll has a problem on Windows when using
timeouts < 10ms, in glib/gpoll.c:
/* If not, and we have a significant timeout, poll again with
* timeout then. Note that this will return indication for only
* one event, or only for messages. We ignore timeouts less than
* ten milliseconds as they are mostly pointless on Windows, the
* MsgWaitForMultipleObjectsEx() call will timeout right away
* anyway.
*/
if (retval == 0 && (timeout == INFINITE || timeout >= 10))
retval = poll_rest (poll_msgs, handles, nhandles, fds, nfds, timeout);
so whenever g_poll is called with timeout < 10ms it does
a quick poll instead of wait, this causes significant performance
degradation of QEMU, thus we should use WaitForMultipleObjectsEx
directly
Signed-off-by: Stanislav Vorobiov <s.vorobiov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an initial, simple live migration test from one
running VM to another, using monitor commands.
This is also an example of using the new common.qemu functions
for controlling multiple running qemu instances, for tests that
need a live qemu vm.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new functionality of common.qemu implements the QEMU control
and communication functionality that was originally in test 085.
This removes that now-duplicate functionality, and uses the
common.qemu functions.
The QEMU commandline changes slightly due to this; in addition to
monitor and qmp i/o options, the new QEMU commandline from inside
common.qemu now introduces -machine accel=qtest.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This creates some common functions for bash language qemu-iotests
to control, and communicate with, a running QEMU process.
4 functions are introduced:
1. _launch_qemu()
This launches the QEMU process(es), and sets up the file
descriptors and fifos for communication. You can choose to
launch each QEMU process listening for either QMP or HMP
monitor. You can call this function multiple times, and
save the handle returned from each. The returned handle is
in $QEMU_HANDLE. You must copy this value.
Commands 2 and 3 use the handle received from _launch_qemu(), to talk
to the appropriate process.
2. _send_qemu_cmd()
Sends a command string, specified by $2, to QEMU. If $3 is
non-NULL, _send_qemu_cmd() will wait to receive $3 as a
required result string from QEMU. Failure to receive $3 will
cause the test to fail. The command can optionally be retried
$qemu_cmd_repeat number of times. Set $qemu_error_no_exit
to not force the test the fail on exit; in this case,
$QEMU_STATUS[$1] will be set to -1 on failure.
3. _timed_wait_for()
Waits for a response, for up to a default of 10 seconds. If
$2 is not seen in that time (anywhere in the response), then
the test fails. Primarily used by _send_qemu_cmd, but could
be useful standalone, as well. To prevent automatic exit
(and therefore test failure), set $qemu_error_no_exit to a
non-NULL value. If $silent is a non-NULL value, then output
to stdout will be suppressed.
4. _cleanup_qemu()
Kills the running QEMU processes, and removes the fifos.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The current version of raw-posix always uses ioctl(FS_IOC_FIEMAP) if
FIEMAP is available; lseek with SEEK_HOLE/SEEK_DATA are not even
compiled in in this case. However, there may be implementations which
support the latter but not the former (e.g., NFSv4.2) as well as vice
versa.
To cover both cases, try FIEMAP first (as this will return -ENOTSUP if
not supported instead of returning a failsafe value (everything
allocated as a single extent)) and if that does not work, fall back to
SEEK_HOLE/SEEK_DATA.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The docs for glfs_init suggest that the function sets errno on every
failure. In fact it doesn't. As other functions such as
qemu_gluster_open() in the gluster block code report their errors based
on this fact we need to make sure that errno is set on each failure.
This fixes a crash of qemu-img/qemu when a gluster brick isn't
accessible from given host while the server serving the volume
description is.
Thread 1 (Thread 0x7ffff7fba740 (LWP 203880)):
#0 0x00007ffff77673f8 in glfs_lseek () from /usr/lib64/libgfapi.so.0
#1 0x0000555555574a68 in qemu_gluster_getlength ()
#2 0x0000555555565742 in refresh_total_sectors ()
#3 0x000055555556914f in bdrv_open_common ()
#4 0x000055555556e8e8 in bdrv_open ()
#5 0x000055555556f02f in bdrv_open_image ()
#6 0x000055555556e5f6 in bdrv_open ()
#7 0x00005555555c5775 in bdrv_new_open ()
#8 0x00005555555c5b91 in img_info ()
#9 0x00007ffff62c9c05 in __libc_start_main () from /lib64/libc.so.6
#10 0x00005555555648ad in _start ()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clocks are initialized in qemu_init_main_loop. They are not needed before it.
Initializing them twice is not only unnecessary but is harmful: it results in
memory leak and potentially can lead to a situation where different parts of
QEMU use different sets of timers.
To avoid it remove init_clocks call from main and add an assertion to
qemu_clock_init that corresponding clock has not been initialized yet.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The immediately visible effect of this patch is that it fixes committing
a temporary snapshot to its backing file. Previously, it would fail with
a "permission denied" error because bdrv_inherited_flags() forced the
backing file to be read-only, ignoring the r/w reopen of bdrv_commit().
The bigger problem this revealed is that the original open flags must
actually only be applied to the temporary snapshot, and the original
image file must be treated as a backing file of the temporary snapshot
and get the right flags for that.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/qmp-unstable/queue/qmp: (38 commits)
Revert "qapi: Clean up superfluous null check in qapi_dealloc_type_str()"
qapi: Document optional arguments' backwards compatibility
qmp: use valid JSON in transaction example
qmp: Don't use error_is_set() to suppress additional errors
dump: Drop pointless error_is_set(), DumpState member errp
qemu-option: Clean up fragile use of error_is_set()
qga: Drop superfluous error_is_set()
qga: Clean up fragile use of error_is_set()
qapi: Clean up fragile use of error_is_set()
tests/qapi-schema: Drop superfluous error_is_set()
qapi: Drop redundant, unclean error_is_set()
hmp: Guard against misuse of hmp_handle_error()
qga: Use return values instead of error_is_set(errp)
error: Consistently name Error ** objects errp, and not err
qmp: Consistently name Error ** objects errp, and not err
qga: Consistently name Error ** objects errp, and not err
qmp hmp: Consistently name Error * objects err, and not errp
pci-assign: assigned_initfn(): set monitor error in common error handler
pci-assign: propagate errors from assign_intx()
pci-assign: propagate errors from assign_device()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 25a7017555.
Turns out the argument *can* be null: QEMU now segfaults if it
receives an invalid parameter via a qmp command instead of throwing an
error.
For example:
{ "execute": "blockdev-add",
"arguments": { "options" : { "driver": "invalid-driver" } } }
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>