Some registers are defined to have immutable bits, this commit
will implement that behavior.
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230105102349.2181856-1-quic_mliebel@quicinc.com>
This patch manually suppresses a warning for an unused variable
(yynerrs) emitted by bison.
This warning has been triggered for the first time by clang 15.
This patch also disables `-Wextra`, which is not usually adopted in
QEMU. However, clang 15 triggers the warning fixed in this patch even in
absence of `-Wextra`.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221221155327.1504117-1-ale@rev.ng>
The patch renames the identifier of the 32bit register
HEX_REG_P3_0 to HEX_REG_P3_0_ALIASED.
This change is to intended to provide some warning that
HEX_REG_P3_0 is an aliased register which has multiple
representations in CPU state and therefore might require
special handling in some contexts. The hope is to prevent
accidental misuse of this register e.g the issue reported
for the signals tests failure [here][1].
[1]: https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-3-quic_mthiyaga@quicinc.com>
Adds checks to the hashst and hashchk instructions to only execute if
enabled by the relevant aspect in the DEXCR and HDEXCR.
This behaviour is guarded behind TARGET_PPC64 since Power10 is
currently the only implementation which has the DEXCR.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Message-Id: <20221220042330.2387944-3-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Define the DEXCR and HDEXCR as special purpose registers.
Each register occupies two SPR indicies, one which can be read in an
unprivileged state and one which can be modified in the appropriate
priviliged state, however both indicies refer to the same underlying
value.
Note that the ISA uses the abbreviation UDEXCR in two different
contexts: the userspace DEXCR, the SPR index which can be read from
userspace (implemented in this patch), and the ultravisor DEXCR, the
equivalent register for the ultravisor state (not implemented).
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221220042330.2387944-2-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's not leave developers in the dark where this log message comes
from.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
kvm_ppc.h is missing various declarations from "cpu.h":
target/ppc/kvm_ppc.h:128:40: error: unknown type name 'CPUPPCState'; did you mean 'CPUState'?
static inline int kvmppc_get_hypercall(CPUPPCState *env,
^~~~~~~~~~~
CPUState
include/qemu/typedefs.h:45:25: note: 'CPUState' declared here
typedef struct CPUState CPUState;
^
target/ppc/kvm_ppc.h:134:40: error: unknown type name 'PowerPCCPU'
static inline int kvmppc_set_interrupt(PowerPCCPU *cpu, int irq, int level)
^
target/ppc/kvm_ppc.h:285:38: error: unknown type name 'hwaddr'
hwaddr ptex, int n)
^
target/ppc/kvm_ppc.h:220:15: error: unknown type name 'target_ulong'
static inline target_ulong kvmppc_configure_v3_mmu(PowerPCCPU *cpu,
^
target/ppc/kvm_ppc.h:286:38: error: unknown type name 'ppc_hash_pte64_t'
static inline void kvmppc_read_hptes(ppc_hash_pte64_t *hptes,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The fid instruction (Floating-Point Identify) puts the FPU model and
revision into the Status Register. Since those values shouldn't be 0,
store values there which a PCX-L2 (for 32-bit) or a PCX-W2 (for 64-bit)
would return. Noticed while trying to install MPE/iX.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Qemu currently emulates a 32-bit CPU only, and crashes with this error
when it faces a 64-bit load (e.g. "ldd 0(r26),r0") or a 64-bit store
(e.g. "std r26,0(r26)") instruction in the guest:
ERROR:../qemu/tcg/tcg-op.c:2822:tcg_canonicalize_memop: code should not be reached
Add checks for 64-bit sizes and generate an illegal instruction
exception if necessary.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Typo had double-writes to data registers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1363
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The values in env->flags are a subset of tb->flags.
Restore only the bits that belong.
Cc: qemu-stable@nongnu.org
Fixes: ab419fd8a0 ("target/sh4: Fix TB_FLAG_UNALIGN")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20221212011345.GA2235238@roeck-us.net>
[rth: Reduce to only the the superh_cpu_synchronize_from_tb change]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmOc2BEACgkQewJE+xLe
RCKqFwf/U/uWaQiF59OXyLHj9PR/bTf7PmZL12g8MTrntzmtIpRiTQb7ajJaLwyn
TcCG9j9Ss6kWBq+LH5TBvstnSN9/3qEgnj2b26y6EAn85mSh6fai4foUPjXFUy7m
2Of0kuc2WKmwxN9C2iw6Hm6pbL3FSnYzKtBuSFzYyAIS0doLFT97zE97XnBtTQ4C
49JdNgQW9CKt7cCpKTcQA4N3ZO8LdARdvOtTShX1++qd4Trm0haTGRdaygSrTlS7
Eeqs4nbakKEE6VH2iltPGKX+KHbMCf2ZW7lefxHi+EuzE0DBIVoM64UnalyFfcSU
hVMGF15HgAIAjecim0Y4AbPB/zVlEw==
=PC9+
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20221216-1' of https://github.com/quic/qemu into staging
1)
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
# gpg: Signature made Fri 16 Dec 2022 20:41:53 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20221216-1' of https://github.com/quic/qemu: (21 commits)
target/hexagon: import additional tests
target/hexagon: call idef-parser functions
target/hexagon: import parser for idef-parser
target/hexagon: import lexer for idef-parser
target/hexagon: prepare input for the idef-parser
target/hexagon: introduce new helper functions
target/hexagon: make helper functions non-static
target/hexagon: make slot number an unsigned
target/hexagon: import README for idef-parser
target/hexagon: update MAINTAINERS for idef-parser
Hexagon (target/hexagon) Use direct block chaining for tight loops
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Hexagon (target/hexagon) Add overrides for various forms of jump
Hexagon (target/hexagon) Add overrides for compound compare and jump
Hexagon (target/hexagon) Add overrides for direct call instructions
Hexagon (target/hexagon) Remove next_PC from runtime state
Hexagon (target/hexagon) Remove PC from the runtime state
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
Hexagon (target/hexagon) Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend gen_tcg_funcs.py in order to emit calls to the functions emitted
by the idef-parser, if available.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-11-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-10-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-9-anjo@rev.ng>
Introduce infrastructure necessary to produce a file suitable for being
parsed by the idef-parser. A build option is also added to fully disable
the output of idef-parser, which is useful for debugging.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-8-anjo@rev.ng>
These helpers will be employed by the idef-parser generated code, to
correctly implement instruction semantics. "Helper" functions, in the
context of this patch, refers to functions which provide a manual TCG
implementation of certain features.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Niccolò Izzo <nizzo@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-6-anjo@rev.ng>
Make certain helper functions non-static, making them available outside
genptr.c. These functions are required by code generated by the
idef-parser.
This commit also makes some functions in op_helper.c non-static in order
to avoid having them marked as unused when using the idef-parser
generated code.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-5-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-4-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-3-anjo@rev.ng>
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Hexagon inner loops end with the endloop0 instruction
To go back to the beginning of the loop, this instructions writes to PC
from register SA0 (start address 0). To use direct block chaining, we
have to assign PC with a constant value. So, we specialize the code
generation when the start of the translation block is equal to SA0.
When this is the case, we defer the compare/branch from endloop0 to
gen_end_tb. When this is done, we can assign the start address of the TB
to PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-12-tsimpson@quicinc.com>
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Recall that Hexagon allows packets with multiple jumps where only the
first one with a true predicate will actually jump. We can use
tcg_gen_goto_tb/tcg_gen_exit_tb when the packet contains a single
PC-relative branch or jump. If not, we use tcg_gen_lookup_and_goto_ptr.
We add the following to DisasContext in order to delay the branching
until the end of packet commit (in gen_end_tb)
branch_cond
The TCGCond condition under which the branch is taken
When branch_cond == TCG_COND_NEVER, there isn't a single
direct branch in this packet.
When branch_cond != TCG_COND_ALWAYS, the value is in
hex_branch_taken
branch_dest
The destination of the branch
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-10-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-9-tsimpson@quicinc.com>
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
These instructions will not be generated by idef-parser, so we override
them manually.
Test cases added to tests/tcg/hexagon/usr.c
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221108162906.3166-4-tsimpson@quicinc.com>
Here are example instructions with a predicated .tmp/.cur assignment
if (p1) v12.tmp = vmem(r7 + #0)
if (p0) v12.cur = vmem(r9 + #0)
The .tmp/.cur indicates that references to v12 in the same packet
take the result of the load. However, when the predicate is false,
the value at the start of the packet should be used. After the packet
commits, the .tmp value is dropped, but the .cur value is maintained.
To fix this bug, we preload the original value from the HVX register
into the temporary used for the result.
Test cases added to tests/tcg/hexagon/hvx_misc.c
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-3-tsimpson@quicinc.com>
This enables us to reduce the number of parameters to many functions
In particular, the generated functions previously took all 3 as arguments
Not only does this simplify the code, it improves the translation time
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-2-tsimpson@quicinc.com>
Convert the xtensa CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-20-peter.maydell@linaro.org
Convert the tricore CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-19-peter.maydell@linaro.org
Convert the sparc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-18-peter.maydell@linaro.org
Convert the sh4 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-17-peter.maydell@linaro.org
Convert the rx CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-16-peter.maydell@linaro.org
Convert the riscv CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-15-peter.maydell@linaro.org
Convert the ppc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-14-peter.maydell@linaro.org
Convert the openrisc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-13-peter.maydell@linaro.org
Convert the nios2 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-12-peter.maydell@linaro.org
Convert the mips CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-11-peter.maydell@linaro.org
Convert the microblaze CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-10-peter.maydell@linaro.org
Convert the m68k CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-9-peter.maydell@linaro.org
Convert the loongarch CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-8-peter.maydell@linaro.org
Convert the i386 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-7-peter.maydell@linaro.org
Convert the hexagon CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-6-peter.maydell@linaro.org
Convert the cris CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20221124115023.2437291-5-peter.maydell@linaro.org
Marco Liebel