Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.
One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.
Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.
None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.
In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).
In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.
The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.
This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.
Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga_mmio_init() is used only one time and not very helpful,
inline and remove it.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-5-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce TYPE_VGA_MMIO, a sysbus device.
While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inline vga_mm_init() in vga_mmio_init() to simplify the
next patch review. Kind of.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise we run the error handling code even for successful requests.
Fixes: 13b250b12a ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>
When closing the QEMU Gtk display window, it can occasionaly warn:
qemu-system-x86_64: Gtk: gtk_clipboard_set_with_data: assertion 'targets != NULL' failed
#3 0x00007ffff4f02f22 in gtk_clipboard_set_with_data (clipboard=<optimized out>, targets=<optimized out>, n_targets=<optimized out>, get_func=<optimized out>, clear_func=<optimized out>, user_data=<optimized out>) at /usr/src/debug/gtk3-3.24.30-4.fc35.x86_64/gtk/gtkclipboard.c:672
#4 0x00007ffff552cd75 in gd_clipboard_update_info (gd=0x5555579a9e00, info=0x555557ba4b50) at ../ui/gtk-clipboard.c:98
#5 0x00007ffff552ce00 in gd_clipboard_notify (notifier=0x5555579aaba8, data=0x7fffffffd720) at ../ui/gtk-clipboard.c:128
#6 0x000055555603e0ff in notifier_list_notify (list=0x555556657470 <clipboard_notifiers>, data=0x7fffffffd720) at ../util/notify.c:39
#7 0x000055555594e8e0 in qemu_clipboard_update (info=0x555557ba4b50) at ../ui/clipboard.c:54
#8 0x000055555594e840 in qemu_clipboard_peer_release (peer=0x55555684a5b0, selection=QEMU_CLIPBOARD_SELECTION_PRIMARY) at ../ui/clipboard.c:40
#9 0x000055555594e786 in qemu_clipboard_peer_unregister (peer=0x55555684a5b0) at ../ui/clipboard.c:19
#10 0x000055555595f044 in vdagent_disconnect (vd=0x55555684a400) at ../ui/vdagent.c:852
#11 0x000055555595f262 in vdagent_chr_fini (obj=0x55555684a400) at ../ui/vdagent.c:908
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211216083233.1166504-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On the last added dbus patch, I left a tiny BO:
==441487==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x611000025a70 at pc 0x7f0817bb764c bp 0x7ffde672ae60 sp 0x7ffde672ae58
WRITE of size 8 at 0x611000025a70 thread T0
#0 0x7f0817bb764b in dbus_vc_class_init ../ui/dbus.c:401
A cookie for ASAN! not you C :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 7f767ca35e ("ui/dbus: register D-Bus VC handler")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211222144032.443424-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Quote from:
High Definition Audio Specification 1.0a, section 3.3.35
Offset 80: {IOB}SDnCTL Stream Reset (SRST): Writing a 1 causes
the corresponding stream to be reset. The Stream Descriptor
registers (except the SRST bit itself) ... are reset.
Change the code to reset the Stream Descriptor Control and Status
registers except the SRST bit.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/757
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio recordings with the DirectSound backend don't sound right.
A look a the Microsoft online documentation tells us why.
From the DirectSound Programming Guide, Capture Buffer Information:
'You can safely copy data from the buffer only up to the read
cursor.'
Change the code to read up to the read cursor instead of the
capture cursor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Windows the jack_set_thread_creator() function and on MacOS the
pthread_setname_np() function with a thread pointer paramater is
not available. Use #ifdefs to remove the jack_set_thread_creator()
function call and the qjack_thread_creator() function in both
cases.
The qjack_thread_creator() function just sets the name of the
created thread for debugging purposes and isn't really necessary.
From the jack_set_thread_creator() documentation:
(...)
No normal application/client should consider calling this. (...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/785
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20211226154017.6067-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDB statck is as follows:
(gdb) bt
0 __lll_lock_wait (futex=futex@entry=0x56211df20360, private=0) at lowlevellock.c:52
1 0x00007f263caf20a3 in __GI___pthread_mutex_lock (mutex=0x56211df20360) at ../nptl/pthread_mutex_lock.c:80
2 0x000056211a757364 in qemu_mutex_lock_impl (mutex=0x56211df20360, file=0x56211a804857 "../ui/vnc-jobs.h", line=60)
at ../util/qemu-thread-posix.c:80
3 0x000056211a0ef8c7 in vnc_lock_output (vs=0x56211df14200) at ../ui/vnc-jobs.h:60
4 0x000056211a0efcb7 in vnc_clipboard_send (vs=0x56211df14200, count=1, dwords=0x7ffdf1701338) at ../ui/vnc-clipboard.c:138
5 0x000056211a0f0129 in vnc_clipboard_notify (notifier=0x56211df244c8, data=0x56211dd1bbf0) at ../ui/vnc-clipboard.c:209
6 0x000056211a75dde8 in notifier_list_notify (list=0x56211afa17d0 <clipboard_notifiers>, data=0x56211dd1bbf0) at ../util/notify.c:39
7 0x000056211a0bf0e6 in qemu_clipboard_update (info=0x56211dd1bbf0) at ../ui/clipboard.c:50
8 0x000056211a0bf05d in qemu_clipboard_peer_release (peer=0x56211df244c0, selection=QEMU_CLIPBOARD_SELECTION_CLIPBOARD)
at ../ui/clipboard.c:41
9 0x000056211a0bef9b in qemu_clipboard_peer_unregister (peer=0x56211df244c0) at ../ui/clipboard.c:19
10 0x000056211a0d45f3 in vnc_disconnect_finish (vs=0x56211df14200) at ../ui/vnc.c:1358
11 0x000056211a0d4c9d in vnc_client_read (vs=0x56211df14200) at ../ui/vnc.c:1611
12 0x000056211a0d4df8 in vnc_client_io (ioc=0x56211ce70690, condition=G_IO_IN, opaque=0x56211df14200) at ../ui/vnc.c:1649
13 0x000056211a5b976c in qio_channel_fd_source_dispatch
(source=0x56211ce50a00, callback=0x56211a0d4d71 <vnc_client_io>, user_data=0x56211df14200) at ../io/channel-watch.c:84
14 0x00007f263ccede8e in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
15 0x000056211a77d4a1 in glib_pollfds_poll () at ../util/main-loop.c:232
16 0x000056211a77d51f in os_host_main_loop_wait (timeout=958545) at ../util/main-loop.c:255
17 0x000056211a77d630 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
18 0x000056211a45bc8e in qemu_main_loop () at ../softmmu/runstate.c:726
19 0x000056211a0b45fa in main (argc=69, argv=0x7ffdf1701778, envp=0x7ffdf17019a8) at ../softmmu/main.c:50
From the call trace, we can see it is a deadlock bug.
vnc_disconnect_finish will acquire the output_mutex.
But, the output_mutex will be acquired again in vnc_clipboard_send.
Repeated locking will cause deadlock. So, I move
qemu_clipboard_peer_unregister() behind vnc_unlock_output();
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220105020808.597325-1-lei.rao@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)
This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.
[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e518d where we use a
shifted expression in a boolean context:
../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
} else if (LO_COMMPAGE) {
^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE TARGET_PAGE_SIZE
^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE (1 << TARGET_PAGE_BITS)
^
1 error generated.
The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.
Fixes: f5ef0e518d ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is PR_CAPBSET_READ, PR_CAPBSET_DROP and the "legacy"
PR_CAP_AMBIENT PR_GET_SECUREBITS, PR_SET_SECUREBITS.
All of these arguments are integer values only, and do not
require mapping of values between host and guest.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the host signal number to guest signal number
before returning the value to the guest.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220106225738.103012-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The kernel does not special-case arg2 != NULL, so
neither should we.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220106225738.103012-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Place it next to copy_from/to_user_oabi_flock64, the only users,
inside the existing target-specific ifdef. This leaves only
generic ipc structs in target_structs.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220107042600.149852-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-25-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-24-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-23-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fix missing PC from EXCP_DEBUG by
merging the case with EXCP_BREAKPOINT.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-21-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and SIGFPE; use force_sig (SI_KERNEL) for EXCP_DSPDIS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a typo for ESR_EC_DIVZERO, which is integral not floating-point.
Fix the if ladder for decoding floating-point exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reduce the number of ifdefs within cpu_loop().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This si_code was changed in 75abf64287cab, for linux 4.17.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This define is unused, and we have no similar define for
the other signal sub-codes.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These si_codes have been properly set by the kernel since the beginning.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and missing si_code for SIGBUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This si_code was changed in 4cc13e4f6d441, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These si_codes were changed in 535906c684fca, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Add SDHC support for SD card SPI-mode (Frank Chang)
-----BEGIN PGP SIGNATURE-----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=PEEr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging
SD/MMC patches queue
- Add SDHC support for SD card SPI-mode (Frank Chang)
# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/sdmmc-20220108:
hw/sd: Add SDHC support for SD card SPI-mode
hw/sd/sdcard: Rename Write Protect Group variables
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b2fcb0c575
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20220107153019.504124-1-sw@weilnetz.de
Signed-off-by: John Snow <jsnow@redhat.com>
Daniel P. Berrangé
Philippe Mathieu-Daudé
Gerd Hoffmann
Marc-André Lureau
Volker Rümelin
Rao Lei
zhenwei pi
Dario Binacchi
Peter Maydell
Richard Henderson
Stefan Weil