-audio is used like "-audio pa,model=sb16". It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device. The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.
In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend. For now,
keep it simple.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DEFINE_PROP_UINT64_CHECKMASK maro applies certain mask check agaist
user-supplied property value, reject the value if it violates the bitmask.
Co-developed-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-2-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update to c5eb0a61238d ("Linux 5.18-rc6"). Mechanical search and
replace of vfio defines with white space massaging.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These memops perform interleave decoding, walking down the
CXL topology from CFMWS described host interleave
decoder via CXL host bridge HDM decoders, through the CXL
root ports and finally call CXL type 3 specific read and write
functions.
Note that, whilst functional the current implementation does
not support:
* switches
* multiple HDM decoders at a given level.
* unaligned accesses across the interleave boundaries
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20220429144110.25167-34-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once a read or write reaches a CXL type 3 device, the HDM decoders
on the device are used to establish the Device Physical Address
which should be accessed. These functions peform the required maths
and then use a device specific address space to access the
hostmem->mr to fullfil the actual operation. Note that failed writes
are silent, but failed reads return poison. Note this is based
loosely on:
https://lore.kernel.org/qemu-devel/20200817161853.593247-6-f4bug@amsat.org/
[RFC PATCH 0/9] hw/misc: Add support for interleaved memory accesses
Only lightly tested so far. More complex test cases yet to be written.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-33-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accessor to get hold of the cxl state for a CXL host bridge
without exposing the internals of the implementation.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-32-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simple function to search a PCIBus to find a port by
it's port number.
CXL interleave decoding uses the port number as a target
so it is necessary to locate the port when doing interleave
decoding.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-31-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The concept of these is introduced in [1] in terms of the
description the CEDT ACPI table. The principal is more general.
Unlike once traffic hits the CXL root bridges, the host system
memory address routing is implementation defined and effectively
static once observable by standard / generic system software.
Each CXL Fixed Memory Windows (CFMW) is a region of PA space
which has fixed system dependent routing configured so that
accesses can be routed to the CXL devices below a set of target
root bridges. The accesses may be interleaved across multiple
root bridges.
For QEMU we could have fully specified these regions in terms
of a base PA + size, but as the absolute address does not matter
it is simpler to let individual platforms place the memory regions.
ExampleS:
-cxl-fixed-memory-window targets.0=cxl.0,size=128G
-cxl-fixed-memory-window targets.0=cxl.1,size=128G
-cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k
Specifies
* 2x 128G regions not interleaved across root bridges, one for each of
the root bridges with ids cxl.0 and cxl.1
* 256G region interleaved across root bridges with ids cxl.0 and cxl.1
with a 2k interleave granularity.
When system software enumerates the devices below a given root bridge
it can then decide which CFMW to use. If non interleave is desired
(or possible) it can use the appropriate CFMW for the root bridge in
question. If there are suitable devices to interleave across the
two root bridges then it may use the 3rd CFMS.
A number of other designs were considered but the following constraints
made it hard to adapt existing QEMU approaches to this particular problem.
1) The size must be known before a specific architecture / board brings
up it's PA memory map. We need to set up an appropriate region.
2) Using links to the host bridges provides a clean command line interface
but these links cannot be established until command line devices have
been added.
Hence the two step process used here of first establishing the size,
interleave-ways and granularity + caching the ids of the host bridges
and then, once available finding the actual host bridges so they can
be used later to support interleave decoding.
[1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications)
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema
Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both registers and the CFMWS entries in CDAT use simple encodings
for the number of interleave ways and the interleave granularity.
Introduce simple conversion functions to/from the unencoded
number / size. So far the iw decode has not been needed so is
it not implemented.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-27-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CXL Early Discovery Table is defined in the CXL 2.0 specification as
a way for the OS to get CXL specific information from the system
firmware.
CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host
bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software
is able to use this initiate the proper _OSC method, and get the _UID
which is referenced by the CEDT. Therefore the existence of an ACPI0016
device allows a CXL aware driver perform the necessary actions. For a
CXL capable OS, this works. For a CXL unaware OS, this works.
CEDT awaremess requires more. The motivation for ACPI0017 is to provide
the possibility of having a Linux CXL module that can work on a legacy
Linux kernel. Linux core PCI/ACPI which won't be built as a module,
will see the _CID of PNP0A08 and bind a driver to it. If we later loaded
a driver for ACPI0016, Linux won't be able to bind it to the hardware
because it has already bound the PNP0A08 driver. The ACPI0017 device is
an opportunity to have an object to bind a driver will be used by a
Linux driver to walk the CXL topology and do everything that we would
have preferred to do with ACPI0016.
There is another motivation for an ACPI0017 device which isn't
implemented here. An operating system needs an attach point for a
non-volatile region provider that understands cross-hostbridge
interleaving. Since QEMU emulation doesn't support interleaving yet,
this is more important on the OS side, for now.
As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge
Structure (CHBS) which is primarily useful for telling the OS exactly
where the MMIO for the host bridge is.
Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-26-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL host bridges themselves may have MMIO. Since host bridges don't have
a BAR they are treated as special for MMIO. This patch includes
i386/pc support.
Also hook up the device reset now that we have have the MMIO
space in which the results are visible.
Note that we duplicate the PCI express case for the aml_build but
the implementations will diverge when the CXL specific _OSC is
introduced.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-24-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement get and set handlers for the Label Storage Area
used to hold data describing persistent memory configuration
so that it can be ensured it is seen in the same configuration
after reboot.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-22-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This should introduce no change. Subsequent work will make use of this
new class member.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-21-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.
Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).
Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform. The creation of these windows
is later in this series.
The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"
Note: Dropped PCDIMM info interfaces for now. They can be added if
appropriate at a later date.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This works like adding a typical pxb device, except the name is
'pxb-cxl' instead of 'pxb-pcie'. An example command line would be as
follows:
-device pxb-cxl,id=cxl.0,bus="pcie.0",bus_nr=1
A CXL PXB is backward compatible with PCIe. What this means in practice
is that an operating system that is unaware of CXL should still be able
to enumerate this topology as if it were PCIe.
One can create multiple CXL PXB host bridges, but a host bridge can only
be connected to the main root bus. Host bridges cannot appear elsewhere
in the topology.
Note that as of this patch, the ACPI tables needed for the host bridge
(specifically, an ACPI object in _SB named ACPI0016 and the CEDT) aren't
created. So while this patch internally creates it, it cannot be
properly used by an operating system or other system software.
Also necessary is to add an exception to scripts/device-crash-test
similar to that for exiting pxb as both must created on a PCIexpress
host bus.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan.Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-15-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are going to be some potential overheads to CXL enablement,
for example the host bridge region reserved in memory maps.
Add a machine level control so that CXL is disabled by default.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-14-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The easiest way to differentiate a CXL bus, and a PCIE bus is using a
flag. A CXL bus, in hardware, is backward compatible with PCIE, and
therefore the code tries pretty hard to keep them in sync as much as
possible.
The other way to implement this would be to try to cast the bus to the
correct type. This is less code and useful for debugging via simply
looking at the flags.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-13-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Errata F4 to CXL 2.0 clarified the meaning of the timer as the
sum of the value set with the timestamp set command and the number
of nano seconds since it was last set.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory devices implement extra capabilities on top of CXL devices. This
adds support for that.
A large part of memory devices is the mailbox/command interface. All of
the mailbox handling is done in the mailbox-utils library. Longer term,
new CXL devices that are being emulated may want to handle commands
differently, and therefore would need a mechanism to opt in/out of the
specific generic handlers. As such, this is considered sufficient for
now, but may need more depth in the future.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the beginning of implementing mailbox support for CXL 2.0
devices. The implementation recognizes when the doorbell is rung,
handles the command/payload, clears the doorbell while returning error
codes and data.
Generally the mailbox mechanism is designed to permit communication
between the host OS and the firmware running on the device. For our
purposes, we emulate both the firmware, implemented primarily in
cxl-mailbox-utils.c, and the hardware.
No commands are implemented yet.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements all device MMIO up to the first capability. That
includes the CXL Device Capabilities Array Register, as well as all of
the CXL Device Capability Header Registers. The latter are filled in as
they are implemented in the following patches.
Endianness and alignment are managed by softmmu memory core.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL device is a type of CXL component. Conceptually, a CXL device
would be a leaf node in a CXL topology. From an emulation perspective,
CXL devices are the most complex and so the actual implementation is
reserved for discrete commits.
This new device type is specifically catered towards the eventual
implementation of a Type3 CXL.mem device, 8.2.8.5 in the CXL 2.0
specification.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL 2.0 component is any entity in the CXL topology. All components
have a analogous function in PCIe. Except for the CXL host bridge, all
have a PCIe config space that is accessible via the common PCIe
mechanisms. CXL components are enumerated via DVSEC fields in the
extended PCIe header space. CXL components will minimally implement some
subset of CXL.mem and CXL.cache registers defined in 8.2.5 of the CXL
2.0 specification. Two headers and a utility library are introduced to
support the minimum functionality needed to enumerate components.
The cxl_pci header manages bits associated with PCI, specifically the
DVSEC and related fields. The cxl_component.h variant has data
structures and APIs that are useful for drivers implementing any of the
CXL 2.0 components. The library takes care of making use of the DVSEC
bits and the CXL.[mem|cache] registers. Per spec, the registers are
little endian.
None of the mechanisms required to enumerate a CXL capable hostbridge
are introduced at this point.
Note that the CXL.mem and CXL.cache registers used are always 4B wide.
It's possible in the future that this constraint will not hold.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A CXL component is a hardware entity that implements CXL component
registers from the CXL 2.0 spec (8.2.3). Currently these represent 3
general types.
1. Host Bridge
2. Ports (root, upstream, downstream)
3. Devices (memory, other)
A CXL component can be conceptually thought of as a PCIe device with
extra functionality when enumerated and enabled. For this reason, CXL
does here, and will continue to add on to existing PCI code paths.
Host bridges will typically need to be handled specially and so they can
implement this newly introduced interface or not. All other components
should implement this interface. Implementing this interface allows the
core PCI code to treat these devices as special where appropriate.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Message-Id: <20220429144110.25167-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the NBD spec, a server that advertises
NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will
not see any cache inconsistencies: when properly separated by a single
flush, actions performed by one client will be visible to another
client, regardless of which client did the flush.
We always satisfy these conditions in qemu - even when we support
multiple clients, ALL clients go through a single point of reference
into the block layer, with no local caching. The effect of one client
is instantly visible to the next client. Even if our backend were a
network device, we argue that any multi-path caching effects that
would cause inconsistencies in back-to-back actions not seeing the
effect of previous actions would be a bug in that backend, and not the
fault of caching in qemu. As such, it is safe to unconditionally
advertise CAN_MULTI_CONN for any qemu NBD server situation that
supports parallel clients.
Note, however, that we don't want to advertise CAN_MULTI_CONN when we
know that a second client cannot connect (for historical reasons,
qemu-nbd defaults to a single connection while nbd-server-add and QMP
commands default to unlimited connections; but we already have
existing means to let either style of NBD server creation alter those
defaults). This is visible by no longer advertising MULTI_CONN for
'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation.
The harder part of this patch is setting up an iotest to demonstrate
behavior of multiple NBD clients to a single server. It might be
possible with parallel qemu-io processes, but I found it easier to do
in python with the help of libnbd, and help from Nir and Vladimir in
writing the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220512004924.417153-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The next patch wants to adjust whether the NBD server code advertises
MULTI_CONN based on whether it is known if the server limits to
exactly one client. For a server started by QMP, this information is
obtained through nbd_server_start (which can support more than one
export); but for qemu-nbd (which supports exactly one export), it is
controlled only by the command-line option -e/--shared. Since we
already have a hook function used by qemu-nbd, it's easiest to just
alter its signature to fit our needs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220512004924.417153-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_co_queue_restart_all is basically the same as qemu_co_enter_all
but without a QemuLockable argument. That's perfectly fine, but only as
long as the function is marked coroutine_fn. If used outside coroutine
context, qemu_co_queue_wait will attempt to take the lock and that
is just broken: if you are calling qemu_co_queue_restart_all outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker to qemu_co_queue_restart_all and to its sole
non-coroutine_fn caller; it then reimplements the function in terms of
qemu_co_enter_all_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because qemu_co_queue_restart_all does not release the lock, it should
be used only in coroutine context. Introduce a new function that,
like qemu_co_enter_next, does release the lock, and use it whenever
qemu_co_queue_restart_all was used outside coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_co_queue_next is basically the same as qemu_co_enter_next but
without a QemuLockable argument. That's perfectly fine, but only
as long as the function is marked coroutine_fn. If used outside
coroutine context, qemu_co_queue_wait will attempt to take the lock
and that is just broken: if you are calling qemu_co_queue_next outside
coroutine context, the lock is going to be a QemuMutex which cannot be
taken twice by the same thread.
The patch adds the marker and reimplements qemu_co_queue_next in terms of
qemu_co_enter_next_impl, to remove duplicated code and to clarify that the
latter also works in coroutine context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220427130830.150180-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle HostMemoryBackend creation and setting of ms->ram entirely in
machine_run_board_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -boot syntactic sugar for a compound property "-machine boot.{order,menu,...}".
machine_boot_parse is replaced by the setter for the property.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's true that these functions currently affect the batch size in which
coroutines are reused (i.e. moved from the global release pool to the
allocation pool of a specific thread), but this is a bug and will be
fixed in a separate patch.
In fact, the comment in the header file already just promises that it
influences the pool size, so reflect this in the name of the functions.
As a nice side effect, the shorter function name makes some line
wrapping unnecessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
igd-passthrough-isa-bridge is only requested in xen_pt but was
implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc
which is hereby resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-2-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
=t5eR
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
# c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
# iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
# 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
# Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
# 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
# NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
# =t5eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-scsi: move request-related items from .h to .c
virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio-scsi: don't waste CPU polling the event virtqueue
virtio-scsi: fix ctrl and event handler functions in dataplane mode
util/event-loop-base: Introduce options to set the thread pool size
util/main-loop: Introduce the main loop into QOM
Introduce event-loop-base abstract class
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.
Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).
Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.
Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.
Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():
$ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
--object iothread,id=iothread0 \
--device virtio-scsi-pci,iothread=iothread0 \
--blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
--device scsi-hd,drive=drive0
After this patch CPU is no longer wasted.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The thread pool regulates itself: when idle, it kills threads until
empty, when in demand, it creates new threads until full. This behaviour
doesn't play well with latency sensitive workloads where the price of
creating a new thread is too high. For example, when paired with qemu's
'-mlock', or using safety features like SafeStack, creating a new thread
has been measured take multiple milliseconds.
In order to mitigate this let's introduce a new 'EventLoopBase'
property to set the thread pool size. The threads will be created during
the pool's initialization or upon updating the property's value, remain
available during its lifetime regardless of demand, and destroyed upon
freeing it. A properly characterized workload will then be able to
configure the pool to avoid any latency spikes.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-4-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'event-loop-base' provides basic property handling for all 'AioContext'
based event loops. So let's define a new 'MainLoopClass' that inherits
from it. This will permit tweaking the main loop's properties through
qapi as well as through the command line using the '-object' keyword[1].
Only one instance of 'MainLoopClass' might be created at any time.
'EventLoopBaseClass' learns a new callback, 'can_be_deleted()' so as to
mark 'MainLoop' as non-deletable.
[1] For example:
-object main-loop,id=main-loop,aio-max-batch=<value>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-3-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce the 'event-loop-base' abstract class, it'll hold the
properties common to all event loops and provide the necessary hooks for
their creation and maintenance. Then have iothread inherit from it.
EventLoopBaseClass is defined as user creatable and provides a hook for
its children to attach themselves to the user creatable class 'complete'
function. It also provides an update_params() callback to propagate
property changes onto its children.
The new 'event-loop-base' class will live in the root directory. It is
built on its own using the 'link_whole' option (there are no direct
function dependencies between the class and its children, it all happens
trough 'constructor' magic). And also imposes new compilation
dependencies:
qom <- event-loop-base <- blockdev (iothread.c)
And in subsequent patches:
qom <- event-loop-base <- qemuutil (util/main-loop.c)
All this forced some amount of reordering in meson.build:
- Moved qom build definition before qemuutil. Doing it the other way
around (i.e. moving qemuutil after qom) isn't possible as a lot of
core libraries that live in between the two depend on it.
- Process the 'hw' subdir earlier, as it introduces files into the
'qom' source set.
No functional changes intended.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-2-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.
The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.
This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.
Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220505173619.488350-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler, so
we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the LASI device implementation from hw/hppa to hw/misc so that it is
located with all the other miscellaneous devices.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the DINO device implementation from hw/hppa to hw/pci-host so that it is
located with all the other PCI host bridges.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-23-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The pcspk device is the only user of the init_isa function, and the only
-soundhw option which does not create a new device (it hacks into the
PCSpkState by hand). Remove it, since it was deprecated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename VFIOGuestIOMMU iommu field into iommu_mr. Then it becomes clearer
it is an IOMMU memory region.
no functional change intended
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In a subsequent patch, VFIO will need to recognize if
a memory region owner is a TPM CRB device. Hence VFIO
needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So
let's add a stub function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When pulling or pushing an OS context from/to a CPU, we should
re-evaluate the state of the External interrupt signal. Otherwise, we
can end up catching the External interrupt exception in hypervisor
mode, which is unexpected.
The problem is best illustrated with the following scenario:
1. an External interrupt is raised while the guest is on the CPU.
2. before the guest can ack the External interrupt, an hypervisor
interrupt is raised, for example the Hypervisor Decrementer or
Hypervisor Virtualization interrupt. The hypervisor interrupt forces
the guest to exit while the External interrupt is still pending.
3. the hypervisor handles the hypervisor interrupt. At this point, the
External interrupt is still pending. So it's very likely to be
delivered while the hypervisor is running. That's unexpected and can
result in an infinite loop where the hypervisor catches the External
interrupt, looks for an interrupt in its hypervisor queue, doesn't
find any, exits the interrupt handler with the External interrupt
still raised, repeat...
The fix is simply to always lower the External interrupt signal when
pulling an OS context. It means it needs to be raised again when
re-pushing the OS context. Fortunately, it's already the case, as we
now always call xive_tctx_ipb_update(), which will raise the signal if
needed.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This reverts commit b1c0734905. (We
wanted to do so once the 7.1 tree opens, which has happened. The issue
reported in https://gitlab.com/qemu-project/qemu/-/issues/945 should be
fixed by the preceding patches.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-4-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is safe to call in an I/O context, and qcow2_do_open()
does so (invoked in an I/O context by qcow2_co_invalidate_cache()).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220412165836.355850-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Swap half-words (16-bit) and words (32-bit) within a larger value.
Mirrors functions of the same names within include/qemu/bitops.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Miller <dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-5-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The function isn't used outside of qio_channel_command_new_spawn(),
which is !win32-specific.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
GLib g_unix_open_pipe() is essentially like qemu_pipe(), available since
2.30.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It is only used by block/file-posix.c, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Per ast1030_v7.pdf, AST1030 HACE engine is identical to AST2600's HACE
engine.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The aspeed ast2600 accumulative mode is described in datasheet
ast2600v10.pdf section 25.6.4:
1. Allocating and initiating accumulative hash digest write buffer
with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial
state of hash library, and the initial state is already set by
crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add
padding message at the end of the accumulative data. Padding
message described in specific of MD5, SHA-1, SHA224, SHA256,
SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the
padding message internally.
* This patch is to remove the padding message which fed byguest
machine driver.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Support HACE28: Hash HMAC Key Buffer Base Address Register.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The embedded core of AST1030 SoC is ARM Coretex M4.
It is hard to be integrated in the common Aspeed Soc framework.
We introduce a new ast1030 class with instance_init and realize
handlers.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ]
Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v07.pdf, AST1030 SOC doesn't have SCU300, the pclk divider
selection is defined in SCU310[11:8].
Add a get_apb_freq function and a class init handler for ast1030.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-7-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ast1030 tmc(timer controller) is identical to ast2600 tmc.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-6-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 wdt controller is similiar to AST2600's wdt, but it has extra
registers.
Introduce ast1030 object class and increse the number of regs(offset) of
ast1030 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-5-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast2500_2520_datasheet_v1.8 and ast2600v11.pdf, the default value of
WDT00 and WDT04 is 0x014FB180 for ast2500/ast2600.
Add default_status and default_reload_value attributes for storing
counter status and reload value as they are different from ast2400.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-4-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v7.pdf, AST1030 ADC engine is identical to AST2600's ADC.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-2-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Guest code (u-boot) pokes at this on boot. No functionality is required
for guest code to work correctly, but it helps to document the region
being read from.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220318092211.723938-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600 clkin is always 25MHz, introduce clkin_25Mhz attribute
for aspeed_scu_get_clkin() to return the correct clkin for ast2600.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220315075753.8591-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600's HPLL register offset and bit definition are different from
AST2500. Add a hpll calculation function and an apb frequency calculation
function based on SCU200 register description in ast2600v11.pdf.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a platform bus to allow dynamic devices to be connected. This is
based on the ARM implementation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-4-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ARM virt machine currently uses sysbus-fdt to create device tree
entries for dynamically created MMIO devices.
The RISC-V virt machine can also benefit from this, so move the code to
the core directory.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the binary and device tree loading code to the machine done
notifier. This allows us to prepare for editing the device tree as part
of the notifier.
This is based on similar code in the ARM virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-2-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- share it between target/arm and target/riscv
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
-----BEGIN PGP SIGNATURE-----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=IPEn
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJqpu4ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pOQD/9G190+ntJm4Vndz0I6bCDP
# svDrWwsioOJ4q5Pah6517JACkwN5sx0adMGyAeRC3Kcbz5B2141vv9hJOnJmLB1D
# l6KbH8XZaftC0B8fXsPkaH6XEdBHGz6YbOZaLOTwmFqF9d18OFW4d8+CAvfldZRc
# +DYeolEhoL9eLTS16BlXPxb0LajQHhbN1Xdu3t8CGh31C52ZrG4h8cus6YMEDjfA
# rfBthh/2QvVFmDedIfX4QrlImCTs+bTaSkhUBmX6qakWII0QykItgQTEZ8IHEr8/
# QmG+xlkP1MmffyHU3F4inEVXpjCSzula4ycZpNVGsrTHYxLBzsTSD+EzicLHMZSt
# 64tQhLxPjAzC1MEHp7bJHyQXon7REWd6u1jPRlMWTGpZqbMMchBPjFrsxK3YPdvi
# a/8KIulXuX+GjzbOIHnpttIy+U0UrjTEyxjpk+Ay2iZ+U6+hA3i2ni++dzq9dYb6
# IiCl+o29r/7fNaWpG3b38kn9vpxjwAAw+qfwwSqyM+8/KMirgJ8rpEmUPei/h7fy
# vqpNlVxd1+Tzb3ljCXNRriZ05xo5I9LIb+dLAig1orENS7w3SzW/GnM+S7raOwQb
# u9mxNmbQJ1MhkjNC/6wzniBre6EBs31X2GIWeuiWe/js2YFPQC06b1WwIc/bYNUv
# anbECOS34mtxbExFfdlxUQ==
# =IPEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Apr 2022 07:38:38 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm: (54 commits)
hw/arm/smmuv3: Advertise support for SMMUv3.2-BBML2
target/arm: Advertise support for FEAT_BBM level 2
target/arm: Advertise support for FEAT_TTL
hw/arm/smmuv3: Add space in guest error message
hw/arm/smmuv3: Cache event fault record
target/arm: Use field names for accessing DBGWCRn
target/arm: Disable cryptographic instructions when neon is disabled
target/arm: Use tcg_constant for vector descriptor
target/arm: Use tcg_constant for do_brk{2,3}
target/arm: Use tcg_constant for predicate descriptors
target/arm: Use tcg_constant in do_zzi_{sat, ool}, do_fp_imm
target/arm: Use tcg_constant in SUBR
target/arm: Use tcg_constant in LD1, ST1
target/arm: Use tcg_constant in WHILE
target/arm: Use tcg_constant in do_clast_scalar
target/arm: Use tcg_constant in {incr, wrap}_last_active
target/arm: Use tcg_constant in FCPY, CPY
target/arm: Use tcg_constant in SINCDEC, INCDEC
target/arm: Use tcg_constant for trans_INDEX_*
target/arm: Use tcg_constant in trans_CSEL
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Record bit in the Context Descriptor tells the SMMU to report fault
events to the event queue. Since we don't cache the Record bit at the
moment, access faults from a cached Context Descriptor are never
reported. Store the Record bit in the cached SMMUTransCfg.
Fixes: 9bde7f0674 ("hw/arm/smmuv3: Implement translate callback")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220427111543.124620-1-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Like -set and -readconfig, it would not really be too hard to
extend -writeconfig to parsing mechanisms other than QemuOpts.
However, the uses of -writeconfig are substantially more
limited, as it is generally easier to write the configuration
by hand in the first place. In addition, -writeconfig does
not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping.
Just remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414145721.326866-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move sev firmware setup to separate function so it can be used from
other code paths. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220425135051.551037-3-kraxel@redhat.com>
Add possibility to change addresses where VNC server listens for new
connections. Prior to 6.0 this functionality was available through
'change' qmp command which was deleted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-3-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
=I1yM
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb into staging
nbd patches for 2022-04-26
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
# Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
# rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
# Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
# Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
# 5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
# jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
# =I1yM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Apr 2022 01:12:00 PM PDT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
* tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb:
nbd: document what is protected by the CoMutexes
nbd: take receive_mutex when reading requests[].receiving
nbd: move s->state under requests_lock
nbd: code motion and function renaming
nbd: use a QemuMutex to synchronize yanking, reconnection and coroutines
nbd: keep send_mutex/free_sema handling outside nbd_co_do_establish_connection
nbd: remove peppering of nbd_client_connected
nbd: mark more coroutine_fns
nbd: safeguard against waking up invalid coroutine
iotests/223: check new possibility of exporting bitmaps by node/name
qapi: nbd-export: allow select bitmaps by node/name pair
qapi: rename BlockDirtyBitmapMergeSource to BlockDirtyBitmapOrStr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename the type to be reused. Old name is "what is it for". To be
natively reused for other needs, let's name it exactly "what is it".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-2-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement nios2 Vectored Interrupt Controller (VIC).
VIC is connected to EIC. It needs to update rha, ril, rrs and rnmi
fields on Nios2CPU before raising an IRQ.
For that purpose, VIC has a "cpu" property which should refer to the
nios2 cpu and set by the board that connects VIC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-5-amir.gonnen@neuroblade.ai>
[rth: Split out nios2_vic.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-60-richard.henderson@linaro.org>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
