Add unimplemented-device stubs for the various Power Policy Unit
devices that the SSE-200 has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-17-peter.maydell@linaro.org
The SSE-200 has two Message Handling Units (MHUs), which sit behind
the APB PPC0. Wire up some unimplemented-device stubs for these,
since we don't yet implement a real model of this device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-16-peter.maydell@linaro.org
The SYS_VERSION and SYS_CONFIG register values differ between the
IoTKit and SSE-200. Make them configurable via QOM properties rather
than hard-coded, and set them appropriately in the ARMSSE code that
instantiates the IOTKIT_SYSINFO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-15-peter.maydell@linaro.org
Create a cluster object to hold each CPU in the SSE. They are
logically distinct and may be configured differently (for instance
one may not have an FPU where the other does).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-14-peter.maydell@linaro.org
Give each CPU its own container memory region. This is necessary
for two reasons:
* some devices are instantiated one per CPU and the CPU sees only
its own device
* since a memory region can only be put into one container, we must
give each armv7m object a different MemoryRegion as its 'memory'
property, or a dual-CPU configuration will assert on realize when
the second armv7m object tries to put the MR into a container when
it is already in the first armv7m object's container
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-13-peter.maydell@linaro.org
The SSE-200 has two Cortex-M33 CPUs. These see the same view
of memory, with the exception of the "private CPU region" which
has per-CPU devices. Internal device interrupts for SSE-200
devices are mostly wired up to both CPUs, with the exception of
a few per-CPU devices. External GPIO inputs on the SSE-200
device are provided for the second CPU's interrupts above 32,
as is already the case for the first CPU.
Refactor the code to support creation of multiple CPUs.
For the moment we leave all CPUs with the same view of
memory: this will not work in the multiple-CPU case, but
we will fix this in the following commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-12-peter.maydell@linaro.org
For the IoTKit the SRAM bank size is always 32K (15 bits); for the
SSE-200 this is a configurable parameter, which defaults to 32K but
can be changed when it is built into a particular SoC. For instance
the Musca-B1 board sets it to 128K (17 bits).
Make the bank size a QOM property. We follow the SSE-200 hardware in
naming the parameter SRAM_ADDR_WIDTH, which specifies the number of
address bits of a single SRAM bank.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-11-peter.maydell@linaro.org
The SSE-200 has four banks of SRAM, each with its own
Memory Protection Controller, where the IoTKit has only one.
Make the number of SRAM banks a field in ARMSSEInfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-10-peter.maydell@linaro.org
The SSE-200 has 4 banks of SRAM, each with its own internal
Memory Protection Controller. The interrupt status for these
extra MPCs appears in the same security controller SECMPCINTSTATUS
register as the MPC for the IoTKit's single SRAM bank. Enhance the
iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE
variant in use does not have all 4 MPCs then the unused inputs will
simply result in the SECMPCINTSTATUS bits being zero as required.)
The hardcoded constant "1"s in armsse.c indicate the actual number
of SRAM MPCs the IoTKit has, and will be replaced in the following
commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-9-peter.maydell@linaro.org
Rename the files that used to be iotkit.[ch] to
armsse.[ch] to reflect the fact they new cover
multiple Arm subsystems for embedded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-8-peter.maydell@linaro.org
The Arm SSE-200 Subsystem for Embedded is a revised and
extended version of the older IoTKit SoC. Prepare for
adding a model of it by refactoring the IoTKit code into
an abstract base class which contains the functionality,
driven by a class data block specific to each subclass.
(This is the same approach used by the existing bcm283x
SoC family implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-6-peter.maydell@linaro.org
The Arm IoTKit was effectively the forerunner of a series of
subsystems for embedded SoCs, named the SSE-050, SSE-100 and SSE-200:
https://developer.arm.com/products/system-design/subsystems
These are generally quite similar, though later iterations have
extra devices that earlier ones do not.
We want to add a model of the SSE-200, which means refactoring the
IoTKit code into an abstract base class and subclasses (using the
same design that the bcm283x SoC and Aspeed SoC family
implementations do). As a first step, rename the IoTKit struct and
QOM macros to ARMSSE, which is what we're going to name the base
class. We temporarily retain TYPE_IOTKIT to avoid changing the
code that instantiates a TYPE_IOTKIT device here and then changing
it back again when it is re-introduced as a subclass.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-5-peter.maydell@linaro.org
Expose "start-powered-off" as a property of the ARMv7M container,
which we just pass through to the CPU object in the same way that we
do for "init-svtor" and "idau". (We want this for the SSE-200, which
powers up only the first CPU at reset and leaves the second powered
down.)
As with the other CPU properties here, we can't just use alias
properties, because the CPU QOM object is not created until armv7m
realize time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-4-peter.maydell@linaro.org
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcUkaiAAoJEPQH2wBh1c9AHsEIAIU0+FNjtdz7lNgyeBCSFCFa
/qWNk4+w6QBfhTTx/N0hGwh5/FvNYQhby8VHtZitE4/QcLbJwHYgWf14pwce3tP3
3qNB87AdQpKMpbajQM2x2Xy8lnlPeM7fe21Q/12vuX7AlEDT3gH+W9rg94bw2oFN
r+xBk6H5F2aVElw3CwMM7eary4+dPnnCQwAnoqM+g5hdpL+0scrIyARGw7v0hmSn
LDWESCM4a55lEYmwj1wS3J3uj6Fj00yzBvcEuCcT1GO+lXlV8/ciO9r2HqxVKwgz
4GAi/BERoMKjfn+/77/yI5flprPx2voNGgkyBY4C3z9ncnN6u02QBZSusBIWpSg=
=Kt4r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2019-01-31' into staging
Block patches:
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
# gpg: Signature made Thu 31 Jan 2019 00:51:46 GMT
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2019-01-31:
iotests: Allow 147 to be run concurrently
iotests: Bind qemu-nbd to localhost in 147
iotests.py: Add qemu_nbd_pipe()
nvme: use pci_dev directly in nvme_realize
nvme: ensure the num_queues is not zero
nvme: use TYPE_NVME instead of constant string
qemu-io: Add generic function for reinitializing optind.
block/sheepdog: Convert from DPRINTF() macro to trace events
block/file-posix: Convert from DPRINTF() macro to trace events
block/curl: Convert from DPRINTF() macro to trace events
block/ssh: Convert from DPRINTF() macro to trace events
scripts: add render_block_graph function for QEMUMachine
qapi: add x-debug-query-block-graph
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On FreeBSD 11.2:
$ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd'
Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write
After main option parsing, we reinitialize optind so we can parse each
command. However reinitializing optind to 0 does not work on FreeBSD.
What happens when you do this is optind remains 0 after the option
parsing loop, and the result is we try to parse argv[optind] ==
argv[0] == "aio_write" as if it was the first parameter.
The FreeBSD manual page says:
In order to use getopt() to evaluate multiple sets of arguments, or to
evaluate a single set of arguments multiple times, the variable optreset
must be set to 1 before the second and each additional set of calls to
getopt(), and the variable optind must be reinitialized.
(From the rest of the man page it is clear that optind must be
reinitialized to 1).
The glibc man page says:
A program that scans multiple argument vectors, or rescans the same
vector more than once, and wants to make use of GNU extensions such as
'+' and '-' at the start of optstring, or changes the value of
POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting
optind to 0, rather than the traditional value of 1. (Resetting to 0
forces the invocation of an internal initialization routine that
rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.)
This commit introduces an OS-portability function called
qemu_reset_optind which provides a way of resetting optind that works
on FreeBSD and platforms that use optreset, while keeping it the same
as now on other platforms.
Note that the qemu codebase sets optind in many other places, but in
those other places it's setting a local variable and not using getopt.
This change is only needed in places where we are using getopt and the
associated global variable optind.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190118101114.11759-2-rjones@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a new command, returning block nodes (and their users) graph.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181221170909.25584-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some files claim that the code is licensed under the GPL, but then
suddenly suggest that the user should have a look at the LGPL.
That's of course non-sense, replace it with the correct GPL wording
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548255083-8190-1-git-send-email-thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
apci_1_compatible should be acpi_1_compatible.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190125094047.22276-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Include the cluster number in the hash we use to look
up TBs. This is important because a TB that is valid
for one cluster at a given physical address and set
of CPU flags is not necessarily valid for another:
the two clusters may have different views of physical
memory, or may have different CPU features (eg FPU
present or absent).
We put the cluster number in the high 8 bits of the
TB cflags. This gives us up to 256 clusters, which should
be enough for anybody. If we ever need more, or need
more bits in cflags for other purposes, we could make
tb_hash_func() take more data (and expand qemu_xxhash7()
to qemu_xxhash8()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190121152218.9592-4-peter.maydell@linaro.org
For TCG we want to distinguish which cluster a CPU is in, and
we need to do it quickly. Cache the cluster index in the CPUState
struct, by having the cluster object set cpu->cluster_index for
each CPU child when it is realized.
This means that board/SoC code must add all CPUs to the cluster
before realizing the cluster object. Regrettably QOM provides no
way to prevent adding children to a realized object and no way for
the parent to be notified when a new child is added to it, so
we don't have any way to enforce/assert this constraint; all
we can do is document it in a comment. We can at least put in a
check that the cluster contains at least one CPU, which should
catch the typical cases of "realized cluster too early" or
"forgot to parent the CPUs into it".
The restriction on how many clusters can exist in the system
is imposed by TCG code which will be added in a subsequent commit,
but the check to enforce it in cluster.c fits better in this one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190121152218.9592-3-peter.maydell@linaro.org
The m25p80 models dummy cycles using byte transfers. This works well
when the transfers are initiated by the QEMU model of a SPI controller
but when these are initiated by the OS, it breaks emulation.
Snoop the SPI transfer to catch commands requiring dummy cycles and
replace them with byte transfers compatible with the m25p80 model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20190124140519.13838-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ROM devices go via MemoryRegionOps->write() callbacks for write
operations and do not dirty/invalidate that memory. Device emulation
must be able to mark memory ranges that have been modified internally
(e.g. using memory_region_get_ram_ptr()).
Introduce the memory_region_flush_rom_device() API for this purpose.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190123212234.32068-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fix block comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recent microbit firmwares panic if the TWI magnetometer/accelerometer
devices are not detected during startup. We don't implement TWI (I2C)
so let's stub out these devices just to let the firmware boot.
Signed-off by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190110094020.18354-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The device is called via-ide and the modelled IDE controller is not
specific to 82C686B but is also usable independently. Therefore, change
function name prefixes accordingly to match device name.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 2905ced862c8d2ad509d73152171ce2472d72605.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
Now that no CMD646 specific parts are left in CMD646BAR (all remaining
members are really PCI IDE specific) this struct can be deleted moving
the memory regions for PCI IDE BARs to PCIIDEState where they better
belong. The CMD646 PCI IDE model is adjusted accordingly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 4b6cb2ae150dc0d21178209e4beb1e35140a7325.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The io mem ops callbacks are not specific to CMD646 but really follow
the PCI IDE spec so move these from cmd646.c to pci.c to allow other
PCI IDE implementations to use them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: a2b1b2b74afdc78330b8b75605687f683a249635.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The cmd646 io mem ops callbacks only need the IDEBus which is
currently passed via a CMD646BAR struct. No need to wrap it up like
that, we can pass it directly to these callbacks which then allows to
drop the IDEBus from the CMD646BAR.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 7a31c155c9899869794499d841d30c7ef32aae47.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
There was a pointer to PCIIDEState in CMD646BAR which was set but
not used afterwards. Get rid of this unused variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1e352f091aa601fb2e19771aac46529fe278dd91.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.
-----BEGIN PGP SIGNATURE-----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=xxTj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190123a' into staging
Migration pull 2019-01-23
New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.
# gpg: Signature made Wed 23 Jan 2019 15:54:48 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190123a:
migration: introduce pages-per-second
vmstate: constify SaveVMHandlers
tests: add /vmstate/simple/array
migration/rdma: unregister fd handler
migration: unify error handling for process_incoming_migration_co
migration: add more error handling for postcopy_ram_enable_notify
migration: multifd_save_cleanup() can't fail, simplify
migration: fix the multifd code when receiving less channels
Fix segmentation fault when qemu_signal_init fails
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following QMP command leads to a crash when iothreads are used:
{ 'execute': 'device_del', 'arguments': {'id': 'data'} }
The backtrace involves the queue restart coroutine where
tgm->throttle_state is a NULL pointer because
throttle_group_unregister_tgm() has already been called:
(gdb) bt full
#0 0x00005585a7a3b378 in qemu_mutex_lock_impl (mutex=0xffffffffffffffd0, file=0x5585a7bb3d54 "block/throttle-groups.c", line=412) at util/qemu-thread-posix.c:64
err = <optimized out>
__PRETTY_FUNCTION__ = "qemu_mutex_lock_impl"
__func__ = "qemu_mutex_lock_impl"
#1 0x00005585a79be074 in throttle_group_restart_queue_entry (opaque=0x5585a9de4eb0) at block/throttle-groups.c:412
_f = <optimized out>
data = 0x5585a9de4eb0
tgm = 0x5585a9079440
ts = 0x0
tg = 0xffffffffffffff98
is_write = false
empty_queue = 255
This coroutine should not execute in the iothread after the throttle
group member has been unregistered!
The root cause is that the device_del code path schedules the restart
coroutine in the iothread while holding the AioContext lock. Therefore
the iothread cannot execute the coroutine until after device_del
releases the lock - by this time it's too late.
This patch adds a reference count to ThrottleGroupMember so we can
synchronously wait for restart coroutines to complete. Once they are
done it is safe to unregister the ThrottleGroupMember.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190114133257.30299-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qapi_event_send_FOO() functions emit events like this:
QMPEventFuncEmit emit;
emit = qmp_event_get_func_emit();
if (!emit) {
return;
}
qmp = qmp_event_build_dict("FOO");
[put event arguments into @qmp...]
emit(QAPI_EVENT_FOO, qmp);
The value of qmp_event_get_func_emit() depends only on the program:
* In qemu-system-FOO, it's always monitor_qapi_event_queue.
* In tests/test-qmp-event, it's always event_test_emit.
* In all other programs, it's always null.
This is exactly the kind of dependence the linker is supposed to
resolve; we don't actually need an indirection.
Note that things would fall apart if we linked more than one QAPI
schema into a single program: each set of qapi_event_send_FOO() uses
its own event enumeration, yet they share a single emit function.
Which takes the event enumeration as an argument. Which one if
there's more than one?
More seriously: how does this work even now? qemu-system-FOO wants
QAPIEvent, and passes a function taking that to
qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and
passes a function taking that to qmp_event_set_func_emit().
It works by type trickery, of course:
typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict);
void qmp_event_set_func_emit(QMPEventFuncEmit emit);
QMPEventFuncEmit qmp_event_get_func_emit(void);
We use unsigned instead of the enumeration type. Relies on both
enumerations boiling down to unsigned, which happens to be true for
the compilers we use.
Clean this up as follows:
* Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit()
instead of the value of qmp_event_set_func_emit().
* Generate a prototype for PREFIX_qapi_event_emit() into
qapi-events.h.
* PREFIX_ is empty for qapi/qapi-schema.json, and test_ for
tests/qapi-schema/qapi-schema-test.json. It's qga_ for
qga/qapi-schema.json, and doc-good- for
tests/qapi-schema/doc-good.json, but those don't define any events.
* Rename monitor_qapi_event_queue() to qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
qemu-system-FOO.
* Rename event_test_emit() to test_qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
tests/test-qmp-event.
* Add a qapi_event_emit() that does nothing to stubs/monitor.c. This
takes care of all other programs that link code emitting QMP events.
* Drop qmp_event_set_func_emit(), qmp_event_get_func_emit().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typos fixed]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114133139.27346-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clang v7.0.1 does not like the __int128 variable type for inline
assembly on s390x:
In file included from fpu/softfloat.c:97:
include/fpu/softfloat-macros.h:647:9: error: inline asm error:
This value type register class is not natively supported!
asm("dlgr %0, %1" : "+r"(n) : "r"(d));
^
Disable this code part there now when compiling with Clang, so that
the generic code gets used instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Clang version 3.4.2 does not know the -Wpragmas option yet and bails
out with an error when we try to disable it in linux-user/qemu.h.
Fortunately, clang has a __has_warning() macro which allows us to add
an explicit check for the option that we want to ignore. With that we
can check for the availability of "-Waddress-of-packed-member" properly
and do not need the "-Wpragmas" at all here.
Fixes: 850d5e330a
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 2974e916df introduced the VirtioNetRscChain structure which
refer to a VirtIONet, declared later, thus required VirtIONet typedef
to use a forward declaration.
However, when compiling with Clang in -std=gnu99 mode, this triggers
the following warning/error:
CC hw/net/virtio-net.o
In file included from qemu/hw/net/virtio-net.c:22:
include/hw/virtio/virtio-net.h:189:3: error: redefinition of typedef 'VirtIONet' is a C11 feature [-Werror,-Wtypedef-redefinition]
} VirtIONet;
^
include/hw/virtio/virtio-net.h:110:26: note: previous definition is here
typedef struct VirtIONet VirtIONet;
^
1 error generated.
make: *** [rules.mak:69: hw/net/virtio-net.o] Error 1
Fix it by removing the duplicate typedef definition.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the ppc code with clang and -std=gnu99, there are a
couple of warnings/errors like this one:
CC ppc64-softmmu/hw/intc/xics.o
In file included from hw/intc/xics.c:35:
include/hw/ppc/xics.h:43:25: error: redefinition of typedef 'ICPState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct ICPState ICPState;
^
target/ppc/cpu.h:1181:25: note: previous definition is here
typedef struct ICPState ICPState;
^
Work around the problems by including the proper headers in spapr.h
and by using struct forward declarations in cpu.h.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with Clang in -std=gnu99 mode, there is a warning/error:
CC ppc64-softmmu/hw/intc/xics_spapr.o
In file included from /home/thuth/devel/qemu/hw/intc/xics_spapr.c:34:
/home/thuth/devel/qemu/include/hw/ppc/xics.h:203:34: error: redefinition of typedef 'sPAPRMachineState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct sPAPRMachineState sPAPRMachineState;
^
/home/thuth/devel/qemu/include/hw/ppc/spapr_irq.h:25:34: note: previous definition is here
typedef struct sPAPRMachineState sPAPRMachineState;
^
We have to remove the duplicated typedef here and include "spapr.h" instead.
But "spapr.h" should not be included for the pnv machine files. So move
the spapr-related prototypes into a new file called "xics_spapr.h" instead.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Header files requiring PixelFormat already include "ui/qemu-pixman.h".
To clean "qemu/typedefs.h", move the declaration to "ui/qemu-pixman.h"
(removing the forward declaration).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Header files requiring MouseTransformInfo already include "ui/console.h".
To clean "qemu/typedefs.h", move the declaration to "ui/console.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring DisplayState/DisplaySurface already include "ui/console.h".
To clean "qemu/typedefs.h", move the declarations to "ui/console.h"
(removing DisplaySurface forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
