Commit Graph

242 Commits

Author SHA1 Message Date
Laurent Vivier e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Michael S. Tsirkin 6b4495401b pcie: fix link active status bit migration
We changed link status register in pci express endpoint capability
over time. Specifically,

commit b2101eae63 ("pcie: Set the "link
active" in the link status register") set data link layer link active
bit in this register without adding compatibility to old machine types.

When migrating from qemu 2.3 and older this affects xhci devices which
under machine type 2.0 and older have a pci express endpoint capability
even if they are on a pci bus.

Add compatibility flags to make this bit value match what it was under
2.3.

Additionally, to avoid breaking migration from qemu 2.3 and up,
suppress checking link status during migration: this seems sane
since hardware can change link status at any time.

https://bugzilla.redhat.com/show_bug.cgi?id=1352860

Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b2101eae63
    ("pcie: Set the "link active" in the link status register")
Cc: qemu-stable@nongnu.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:07:08 +03:00
Peter Xu e1d4fb2de5 kvm-irqchip: x86: add msi route notify fn
One more IEC notifier is added to let msi routes know about the IEC
changes. When interrupt invalidation happens, all registered msi routes
will be updated for all PCI devices.

Since both vfio and vhost are possible gsi route consumers, this patch
will go one step further to keep them safe in split irqchip mode and
when irqfd is enabled.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[move trace-events lines into target-i386/trace-events]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21 20:44:19 +03:00
Eric Blake c7eb39cbd4 qapi: Improve use of qmp/types.h
'qjson.h' is not a QObject subtype; include this file directly in
.c files that are using it, rather than abusing qmp/types.h for
that purpose.

Meanwhile, for files that include a list of individual QObject
subtypes, it's easier to just use qmp/types.h for that purpose.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:03 +02:00
Cao jin 1108b2f8a9 pci: Convert msi_init() to Error and fix callers to check it
msi_init() reports errors with error_report(), which is wrong
when it's used in realize().

Fix by converting it to Error.

Fix its callers to handle failure instead of ignoring it.

For those callers who don't handle the failure, it might happen:
when user want msi on, but he doesn't get what he want because of
msi_init fails silently.

cc: Gerd Hoffmann <kraxel@redhat.com>
cc: John Snow <jsnow@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Alex Williamson <alex.williamson@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-07-05 13:14:41 +03:00
Markus Armbruster a0efbf1660 range: Eliminate direct Range member access
Users of struct Range mess liberally with its members, which makes
refactoring hard.  Create a set of methods, and convert all users to
call them instead of accessing members.  The methods have carefully
worded contracts, and use assertions to check them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04 16:49:33 +03:00
Cao jin 5178ecd863 pci_register_bar: cleanup
place relevant code tegother, make the code easier to read

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-04 16:49:33 +03:00
Marcel Apfelbaum b86eacb804 hw/pci: delay bus_master_enable_region initialization
Skip bus_master_enable region creation on PCI device init
in order to be sure the IOMMU device (if present) would
be created in advance. Add this memory region at machine_done time.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04 14:50:01 +03:00
Daniel P. Berrange fec28134e5 trace: split out trace events for hw/pci/ directory
Move all trace-events for files in the hw/pci/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-28-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:16 +01:00
Cao jin 2cbb1a6826 msi_init: change return value to 0 on success
No caller use its return value as msi capability offset, also in order
to make its return behaviour consistent with msix_init().

cc: Michael S. Tsirkin <mst@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Hannes Reinecke <hare@suse.de>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>

Acked-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:03 +03:00
Cao jin 52ea63dea4 fix some coding style problems
It has:
1. More newlines make the code block well separated.
2. Add more comments for msi_init.
3. Fix a indentation in vmxnet3.c.
4. ioh3420 & xio3130_downstream: put PCI Express capability init function
   together, make it more readable.

cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:03 +03:00
Cao jin 97fe42f19b pci core: assert ENOSPC when add capability
ENOSPC is programming error, assert it for debugging.

cc: Michael S. Tsirkin <mst@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:03 +03:00
Peter Xu 4a94b3aa6d pci: fix pci_requester_id()
This fix SID verification failure when IOMMU IR is enabled with PCI
bridges. Existing pci_requester_id() is more like getting BDF info
only. Renaming it to pci_get_bdf(). Meanwhile, we provide the correct
implementation to get requester ID. VT-d spec 5.1.1 is a good reference
to go, though it talks only about interrupt delivery, the rule works
exactly the same for non-interrupt cases.

Currently, there are three use cases for pci_requester_id():

- PCIX status bits: here we need BDF only, not requester ID. Replacing
  with pci_get_bdf().
- PCIe Error injection and MSI delivery: for both these cases, we are
  looking for requester IDs. Here we should use the new impl.

To avoid a PCI walk every time we send MSI message, one requester_id
cache field is added to PCIDevice to cache the result when initialize
PCI device.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:02 +03:00
Dmitry Fleytman b56b9285e4 pcie: Introduce function for DSN capability creation
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:26 +08:00
Dmitry Fleytman 6383292ac8 pcie: Add support for PCIe CAP v1
Added support for PCIe CAP v1, while reusing some of the existing v2
infrastructure.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:26 +08:00
Dmitry Fleytman 3bdfaabbcf msix: make msix_clr_pending() visible for clients
This function will be used by e1000e device code.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:09 +08:00
Stefan Weil cb8d4c8f54 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18 15:04:27 +03:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Michael S. Tsirkin 226419d615 msi_supported -> msi_nonbroken
Rename controller flag to make it clearer what it means.
Add some documentation as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11 16:45:21 +02:00
Cao jin 9ae91bc43f pci core: function pci_bus_init() cleanup
remove unused param

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-02-25 13:14:18 +02:00
Cao jin 3dbc01ae87 pci core: function pci_host_bus_register() cleanup
remove unused param, and rename the other to a meaningful one.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-02-25 13:14:18 +02:00
Chen Fan 40f8f0c31b pcie_aer: expose pcie_aer_msg() interface
For vfio device, we need to propagate the aer error to
Guest OS. we use the pcie_aer_msg() to send aer error
to guest.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:28 -07:00
Chen Fan 8d86ada2a7 aer: impove pcie_aer_init to support vfio device
pcie_aer_init was used to emulate an aer capability for pcie device,
but for vfio device, the aer config space size is mutable and is not
always equal to PCI_ERR_SIZEOF(0x48). it depends on where the TLP Prefix
register required, so here we add a size argument.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:28 -07:00
Chen Fan 79095ef717 pcie: modify the capability size assert
Device's Offset and size can reach PCIE_CONFIG_SPACE_SIZE,
fix the corresponding assert.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:27 -07:00
Cao jin 9cfaa0079f change type of pci_bridge_initfn() to void
Since it can`t fail. Also modify the callers.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-16 12:05:18 +02:00
Michael S. Tsirkin e1e4bf2252 msix: fix msix_vector_masked
commit 428c3ece97 ("fix MSI injection on Xen")
inadvertently enabled the xen-specific logic unconditionally.
Limit it to only when xen is enabled.
Additionally, msix data should be read with pci_get_log
since the format is pci little-endian.

Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-16 12:05:18 +02:00
Stefano Stabellini 428c3ece97 fix MSI injection on Xen
On Xen MSIs can be remapped into pirqs, which are a type of event
channels. It's mostly for the benefit of PCI passthrough devices, to
avoid the overhead of interacting with the emulated lapic.

However remapping interrupts and MSIs is also supported for emulated
devices, such as the e1000 and virtio-net.

When an interrupt or an MSI is remapped into a pirq, masking and
unmasking is done by masking and unmasking the event channel. The
masking bit on the PCI config space or MSI-X table should be ignored,
but it isn't at the moment.

As a consequence emulated devices which use MSI or MSI-X, such as
virtio-net, don't work properly (the guest doesn't receive any
notifications). The mechanism was working properly when xen_apic was
introduced, but I haven't narrowed down which commit in particular is
causing the regression.

Fix the issue by ignoring the masking bit for MSI and MSI-X which have
been remapped into pirqs.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06 20:44:10 +02:00
Marcel Apfelbaum 0144f6f1ce hw/pci: ensure that only PCI/PCIe bridges can be attached to pxb/pxb-pcie devices
PCI devices can't be plugged directly into PCI extra root bridges
because their resources can't be computed by firmware before the ACPI
tables are loaded.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06 20:44:08 +02:00
Peter Maydell 97d5408f99 pci: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Cao jin 6ba9fe8695 fix bad indentation in pcie_cap_slot_write_config()
bad indentation conflicts with CODING_STYLE doc

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-06 15:42:38 +03:00
Cao jin 3f1e1478db enable multi-function hot-add
Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will get the notification to scan the slot.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-29 11:17:53 +02:00
Cao jin 0d1c7d88ad remove function during multi-function hot-add
In case user want to cancel the hot-add operation, should roll back,
device_del the added function that still don`t work.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-29 11:17:52 +02:00
Marc-André Lureau 43b11a91dd msix: implement pba write (but read-only)
qpci_msix_pending() writes on pba region, causing qemu to SEGV:

  Program received signal SIGSEGV, Segmentation fault.
  [Switching to Thread 0x7ffff7fba8c0 (LWP 25882)]
  0x0000000000000000 in ?? ()
  (gdb) bt
  #0  0x0000000000000000 in  ()
  #1  0x00005555556556c5 in memory_region_oldmmio_write_accessor (mr=0x5555579f3f80, addr=0, value=0x7fffffffbf68, size=4, shift=0, mask=4294967295, attrs=...) at /home/elmarco/src/qemu/memory.c:434
  #2  0x00005555556558e1 in access_with_adjusted_size (addr=0, value=0x7fffffffbf68, size=4, access_size_min=1, access_size_max=4, access=0x55555565563e <memory_region_oldmmio_write_accessor>, mr=0x5555579f3f80, attrs=...) at /home/elmarco/src/qemu/memory.c:506
  #3  0x00005555556581eb in memory_region_dispatch_write (mr=0x5555579f3f80, addr=0, data=0, size=4, attrs=...) at /home/elmarco/src/qemu/memory.c:1176
  #4  0x000055555560b6f9 in address_space_rw (as=0x555555eff4e0 <address_space_memory>, addr=3759147008, attrs=..., buf=0x7fffffffc1b0 "", len=4, is_write=true) at /home/elmarco/src/qemu/exec.c:2439
  #5  0x000055555560baa2 in cpu_physical_memory_rw (addr=3759147008, buf=0x7fffffffc1b0 "", len=4, is_write=1) at /home/elmarco/src/qemu/exec.c:2534
  #6  0x000055555564c005 in cpu_physical_memory_write (addr=3759147008, buf=0x7fffffffc1b0, len=4) at /home/elmarco/src/qemu/include/exec/cpu-common.h:80
  #7  0x000055555564cd9c in qtest_process_command (chr=0x55555642b890, words=0x5555578de4b0) at /home/elmarco/src/qemu/qtest.c:378
  #8  0x000055555564db77 in qtest_process_inbuf (chr=0x55555642b890, inbuf=0x55555641b340) at /home/elmarco/src/qemu/qtest.c:569
  #9  0x000055555564dc07 in qtest_read (opaque=0x55555642b890, buf=0x7fffffffc2e0 "writel 0xe0100800 0x0\n", size=22) at /home/elmarco/src/qemu/qtest.c:581
  #10 0x000055555574ce3e in qemu_chr_be_write (s=0x55555642b890, buf=0x7fffffffc2e0 "writel 0xe0100800 0x0\n", len=22) at qemu-char.c:306
  #11 0x0000555555751263 in tcp_chr_read (chan=0x55555642bcf0, cond=G_IO_IN, opaque=0x55555642b890) at qemu-char.c:2876
  #12 0x00007ffff64c9a8a in g_main_context_dispatch (context=0x55555641c400) at gmain.c:3122

(without this patch, this can be reproduced with the ivshmem qtest)

Implement an empty mmio write to avoid the crash.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-24 18:03:18 +02:00
Pavel Fedin a05f686ff3 hw/pci: Introduce pci_requester_id()
For GICv3 ITS implementation we are going to use requester IDs in KVM IRQ
routing code. This patch introduces reusable convenient way to obtain this
ID from the device pointer. The new function is now used in some places,
where the same calculation was used.

MemTxAttrs.stream_id also renamed to requester_id in order to better
reflect semantics of the field.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <5814bcb03a297f198e796b13ed9c35059c52f89b.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:13:07 +02:00
Markus Armbruster f8ed85ac99 Fix bad error handling after memory_region_init_ram()
Symptom:

    $ qemu-system-x86_64 -m 10000000
    Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
    upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
    Aborted (core dumped)

Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions.  Before the commit, we report the error and exit(1), in
one place, ram_block_add().  The commit lifts the error handling up
the call chain some, to three places.  Fine.  Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".

The three places are:

* memory_region_init_ram()

  Commit 4994653 (right after commit ef701d7) lifted the error
  handling further, through memory_region_init_ram(), multiplying the
  incorrect use of &error_abort.  Later on, imitation of existing
  (bad) code may have created more.

* memory_region_init_ram_ptr()

  The &error_abort is still there.

* memory_region_init_rom_device()

  Doesn't need fixing, because commit 33e0eb5 (soon after commit
  ef701d7) lifted the error handling further, and in the process
  changed it from &error_abort to passing it up the call chain.
  Correct, because the callers are realize() methods.

Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:

    @r@
    expression mr, owner, name, size, err;
    position p;
    @@
            memory_region_init_ram(mr, owner, name, size,
    (
    -                              &error_abort
    +                              &error_fatal
    |
                                   err@p
    )
                                  );
    @script:python@
        p << r.p;
    @@
    print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)

When the last argument is &error_abort, it gets replaced by
&error_fatal.  This is the fix.

If the last argument is anything else, its position is reported.  This
lets us check the fix is complete.  Four positions get reported:

* ram_backend_memory_alloc()

  Error is passed up the call chain, ultimately through
  user_creatable_complete().  As far as I can tell, it's callers all
  handle the error sanely.

* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()

  DeviceClass.realize() methods, errors handled sanely further up the
  call chain.

We're good.  Test case again behaves:

    $ qemu-system-x86_64 -m 10000000
    qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
    [Exit 1 ]

The next commits will repair the rest of commit ef701d7's damage.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18 14:39:29 +02:00
Paolo Bonzini 84090bbce9 pci: remove Link Training error from AER error list
The spec says:

    Undefined – The value read from this bit is
    undefined. In previous versions of this
    specification, this bit was used to indicate a Link
    Training Error. System software must ignore the
    value read from this bit. System software is
    permitted to write any value to this bit.

Do not allow injecting it.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:32 +02:00
Daniel P. Berrange 4595a48a10 maint: remove unused include for strings.h
A number of files were including strings.h but not using any
of the functions it provides

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Laszlo Ersek 0f288f854b hw/pci: fix pci_update_mappings() trace events
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):

  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
  pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20

The slot and function values are in reverse order.

Stick with the conventional BDF notation.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes: 7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10 12:15:30 +03:00
Benjamin Herrenschmidt 5af2ae2305 pci: Fix pci_device_iommu_address_space() bus propagation
he current code walks up the bus tree for an iommu, however it passes
to the iommu_fn() callback the bus/devfn of the immediate child of
the level where the callback was found, rather than the original
bus/devfn where the search started from.

This prevents iommu's like POWER8 (and in fact also Q35) to properly
provide an address space for a subset of devices that aren't immediate
children of the iommu.

PCIe carries the originator bdfn acccross to the iommu on all DMA
transactions, so we must be able to properly identify devices at all
levels.

This changes the function pci_device_iommu_address_space() to pass
the original pointers to the iommu_fn() callback instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10 11:05:40 +03:00
Peter Maydell 9bff5d8135 hw/pci: Use pow2ceil() rather than hand-calculation
A couple of places in hw/pci use an inline calculation to round a
size up to the next largest power of 2. We have a utility routine
for this, so use it.

(The behaviour of the old code is different if the size value
is 0 -- it would leave it as 0 rather than rounding up to 1,
but in both cases we know the size can't be 0.
In the case where the size value had bit 31 set, the old code
would invoke undefined behaviour; the new code will give a
result of 0. Presumably that could never happen either.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1437741192-20955-2-git-send-email-peter.maydell@linaro.org
2015-09-07 14:19:00 +01:00
Laurent Vivier e402463073 pci: allow 0 address for PCI IO/MEM regions
Some kernels program a 0 address for io regions. PCI 3.0 spec
section 6.2.5.1 doesn't seem to disallow this.

based on patch by Michael Roth <mdroth@linux.vnet.ibm.com>

Add pci_allow_0_addr in MachineClass to conditionally
allow addr 0 for pseries, as this can break other architectures.

This patch allows to hotplug PCI card in pseries machine, as the first
added card BAR0 is always set to 0 address.

This as a temporary hack, waiting to fix PCI memory priorities for more
machine types...

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13 14:08:29 +03:00
Chen Hanxiao 9a2a66238e pci_add_capability: remove duplicate comments
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-20 14:19:41 +03:00
Benjamin Herrenschmidt b2101eae63 pcie: Set the "link active" in the link status register
Some firmwares can test that and assume the device hasn't come
up if that bit isn't set

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-08 10:09:56 +03:00
Dr. David Alan Gilbert 7c59364d03 Print error when failing to load PCI config data
When loading migration fails due to a disagreement about
PCI config data we don't currently get any errors explaining
that was the cause of the problem or which byte in the config
data was at fault.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23 19:57:27 +03:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Eric Blake 34acbc9522 qobject: Use 'bool' inside qdict
Now that qbool is fixed, let's fix getting and setting a bool
value to a qdict member to also use C99 bool rather than int.

I audited all callers to ensure that the changed return type
will not cause any changed semantics.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22 17:40:00 +02:00
Gerd Hoffmann a94f0c5ca2 virtio-vga: add '-vga virtio' support
Some convinience fluff:  Add support for '-vga virtio', also add
virtio-vga to the list of vga cards so '-device virtio-vga' will
turn off the default vga.

Written by Dave Airlie and Gerd Hoffmann.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12 10:13:23 +02:00