Add test cases to test several error cases that must be
generated by invalid failover configuration.
Add a combination of coldplug and hotplug test cases to be
sure the primary is correctly managed according the
presence or not of the STANDBY feature.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211208130350.10178-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the test if bzip2 is not available, and run it after they are
uncompressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xlnx_dp_read allows an out-of-bounds read at its default branch because
of an improper index.
According to
https://www.xilinx.com/html_docs/registers/ug1087/ug1087-zynq-ultrascale-registers.html
(DP Module), registers 0x3A4/0x3A4/0x3AC are allowed.
DP_INT_MASK 0x000003A4 32 mixed 0xFFFFF03F Interrupt Mask Register for intrN.
DP_INT_EN 0x000003A8 32 mixed 0x00000000 Interrupt Enable Register.
DP_INT_DS 0x000003AC 32 mixed 0x00000000 Interrupt Disable Register.
In xlnx_dp_write, when the offset is 0x3A8 and 0x3AC, the virtual device
will write s->core_registers[0x3A4
>> 2]. That is to say, the maxize of s->core_registers could be ((0x3A4
>> 2) + 1). However, the current size of s->core_registers is (0x3AF >>
>> 2), that is ((0x3A4 >> 2) + 2), which is out of the range.
In xlxn_dp_read, the access to offset 0x3A8 or 0x3AC will be directed to
the offset 0x3A8 (incorrect functionality) or 0x3AC (out-of-bounds read)
rather than 0x3A4.
This patch enforces the read access to offset 0x3A8 and 0x3AC to 0x3A4,
but does not adjust the size of s->core_registers to avoid breaking
migration.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <1628059910-12060-1-git-send-email-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vhost-user-blk-test needs the qemu-storage-daemon, otherwise it
currently hangs. So make sure that we build the daemon before running
the tests.
Message-Id: <20210811094705.131314-1-thuth@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
OSS-Fuzz found sending illegal addresses when querying the write
protection bits triggers an assertion:
qemu-fuzz-i386: hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t): Assertion `wpnum < sd->wpgrps_size' failed.
==11578== ERROR: libFuzzer: deadly signal
#8 0x7ffff628e091 in __assert_fail
#9 0x5555588f1a3c in sd_wpbits hw/sd/sd.c:824:9
#10 0x5555588dd271 in sd_normal_command hw/sd/sd.c:1383:38
#11 0x5555588d777c in sd_do_command hw/sd/sd.c
#12 0x555558cb25a0 in sdbus_do_command hw/sd/core.c💯16
#13 0x555558e02a9a in sdhci_send_command hw/sd/sdhci.c:337:12
#14 0x555558dffa46 in sdhci_write hw/sd/sdhci.c:1187:9
#15 0x5555598b9d76 in memory_region_write_accessor softmmu/memory.c:489:5
Similarly to commit 8573378e62 ("hw/sd: fix out-of-bounds check
for multi block reads"), check the address range before sending
the status of the write protection bits.
Include the qtest reproducer provided by Alexander Bulekov:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed.
Reported-by: OSS-Fuzz (Issue 29225)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/450
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210702155900.148665-4-f4bug@amsat.org>
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
-----BEGIN PGP SIGNATURE-----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=8708
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging
Some qemu updates for IPMI and I2C
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210708172556.1868139-6-titusr@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210708172556.1868139-4-titusr@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series
Hardware Programming Guide" limit the sampling range from 4000 Hz to
44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables
3-2 and 3-3).
Later, section 6-15 (DSP Commands) is more specific regarding the 41h /
42h registers (Set digitized sound output sampling rate):
Valid sampling rates range from 5000 to 45000 Hz inclusive.
There is no comment regarding error handling if the register is filled
with an out-of-range value. (See also section 3-28 "8-bit or 16-bit
Auto-initialize Transfer"). Assume limits are enforced in hardware.
This fixes triggering an assertion in audio_calloc():
#1 abort
#2 audio_bug audio/audio.c:119:9
#3 audio_calloc audio/audio.c:154:9
#4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15
#5 audio_pcm_sw_init_out audio/audio_template.h:175:11
#6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9
#7 AUD_open_out audio/audio_template.h:503:14
#8 continue_dma8 hw/audio/sb16.c:216:20
#9 dma_cmd8 hw/audio/sb16.c:276:5
#10 command hw/audio/sb16.c:0
#11 dsp_write hw/audio/sb16.c:949:13
#12 portio_write softmmu/ioport.c:205:13
#13 memory_region_write_accessor softmmu/memory.c:491:5
#14 access_with_adjusted_size softmmu/memory.c:552:18
#15 memory_region_dispatch_write softmmu/memory.c:0:13
#16 flatview_write_continue softmmu/physmem.c:2759:23
#17 flatview_write softmmu/physmem.c:2799:14
#18 address_space_write softmmu/physmem.c:2891:18
#19 cpu_outw softmmu/ioport.c:70:5
[*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html
OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174
Fixes: 85571bc741 ("audio merge (malc)")
Buglink: https://bugs.launchpad.net/bugs/1910603
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210616104349.2398060-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This test case has the same tests as tests/virtio-blk-test.c except for
tests have block_resize. Since the vhost-user-blk export only serves one
client one time, two exports are started by qemu-storage-daemon for the
hotplug test.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The m25p80 test depends on the Aspeed SMC controller to test our
SPI-NOR flash support. Reflect this dependency by changing the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210407171637.777743-17-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds a test for the Aspeed Hash and Crypto (HACE) engine. It tests
the currently implemented behavior of the hash functionality.
The tests are similar, but are cut/pasted instead of broken out into a
common function so the assert machinery produces useful output when a
test fails.
Co-developed-by: Cédric Le Goater <clg@kaod.org>
Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210409000253.1475587-4-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the autogenerated fuzzer test cases as the basis for a set of am53c974
regression tests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-13-mark.cave-ayland@ilande.co.uk>
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
3c3b656885.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Clean up the writes to the configuration space and the PM region, and
rename the test to lpc-ich9-test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the virtio-scsi device,
restrict it to its availability.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the megasas device,
restrict it to its availability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A simply qtest that checks for correct number of netdevs in the response
of the query-netdev.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a simple qtest to exercise the new system counter device in the
SSE-300.
We'll add tests of the system timer device here too, so this includes
scaffolding (register definitions, etc) for those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-45-peter.maydell@linaro.org
Adjust the timeouts for the benchmarks (Meson 0.57 allows 0 to mean
infinite) and for the longest running tests. These are the
times that I measured and the corresponding timeouts. For generic
qtests, the target that reported the longest runtime is included.
unit tests:
test-crypto-tlscredsx509 13.15s 45s
test-crypto-tlssession 14.12s 45s
qtests:
qos-test 21.26s 60s (i386)
ahci-test 22.18s 60s
pxe-test 26.51s 60s
boot-serial-test 28.02s 60s (sparc)
prom-env-test 28.86s 60s
bios-tables-test 50.17s 120s (aarch64)
test-hmp 57.15s 120s (aarch64)
npcm7xx_pwm-test 71.27s 150s
migration-test 97.09s 150s (aarch64)
qom-test 139.20s 240s (aarch64)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a QTest for NPCM7XX SMBus's single byte mode. It sends a
byte to a device in the evaluation board, and verify the retrieved value
is equivalent to the sent value.
Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210210220426.3577804-5-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a simple test of the CMSDK dual timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210128114145.20536-6-peter.maydell@linaro.org
Message-id: 20210121190622.22000-6-peter.maydell@linaro.org
Add a simple test of the CMSDK watchdog, since we're about to do some
refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-5-peter.maydell@linaro.org
Message-id: 20210121190622.22000-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a simple test of the CMSDK APB timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-4-peter.maydell@linaro.org
Message-id: 20210121190622.22000-4-peter.maydell@linaro.org
Add a test case for pvpanic-pci device. The scenario is the same as pvpanic
ISA device, but is using the PCI bus.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
[PMM: added code to free dev and pcibus, which the oss-fuzz
build otherwise complains about as a leak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We add a qtest for the PWM in the previous patch. It proves it works as
expected.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.
Users can alter input value by using qom-set QMP command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAl/SDVIACgkQUaNDx8/7
7KFF3BAAvYPgi/XJN0caP0qbxZy7GvBA1nmINQq910d1ARz04Vin8K6oj9x02taq
1MMhk9KryNRF1VuT98eya8u9htsg1OxrosqSAwjrtI72oSRWLGSl1Ww0sKIPcBET
OUq8pfAv+gW5lVWRkpnEA4Ly33PMTp5zfT3sy0riuSf+Z7Mg/8Lk28tNSOYu6hBl
LUZddcweMshishrJ46F1SSwWFfdZ2+5Y1eLSDRGwn8Ba5xy6SI3UDQVFze1vFmo3
h1Sd9s2tVJtJn4It2op41XKQX99uoGUy98CYVrbAd/1euZIm/6c4ju9upZiFUU/p
wm8I1njd5ybdPzRmJkJ8zQxsblgvw/Ua0YLmX/4aFsPUlKPyomOr++YMXcyrThEY
cxezJsSmj5f/oVaGRULbRVR8hhaM18RLBgwQAbfNSOTylmFa+URT6FLR4mnysfhz
zv76xt6S8BIS8CAgxqB13tj4tQPXUansQsuVTWwRwE8mHd5Vkhau2oOQR5n9cV+n
FNjvmqUN7ICtekmwMmBdNOI4yiGBY1ckcj/UoCzkuAYK444kzTqFfB4CZABNhs5f
/fjAsWAvYtqsLFUWCUnpHkxyq/8N0hpSZc0DI3FDPsup4/NlRG17p+DcrNqimwIE
SZ1I28YYdmoh1igMQK46x7UvvnceCCXkHAnR+nGix8jOpSCWLKs=
=abAb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20201210' into staging
Aspeed patches :
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
# gpg: Signature made Thu 10 Dec 2020 11:58:10 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20201210:
aspeed: g220a-bmc: Add an FRU
aspeed/smc: Add support for address lane disablement
ast2600: SRAM is 89KB
aspeed: Add support for the g220a-bmc board
hw/misc: add an EMC141{3,4} device model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QTests perform five tests on the Xilinx ZynqMP CAN controller:
Tests the CAN controller in loopback, sleep and snoop mode.
Tests filtering of incoming CAN messages.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-4-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Largely inspired by the TMP421 temperature sensor, here is a model for
the EMC1413/EMC1414 temperature sensors.
Specs can be found here :
http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.
Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RNG module returns a byte of randomness when the Data Valid bit is
set.
This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.
A qtest featuring some simple randomness tests is included.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The watchdog is part of NPCM7XX's timer module. Its behavior is
controlled by the WTCR register in the timer.
When enabled, the watchdog issues an interrupt signal after a pre-set
amount of cycles, and issues a reset signal shortly after that.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: deleted blank line at end of npcm_watchdog_timer-test.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test won't work if qemu was compiled without CONFIG_NPCM7XX, as
pointed out by Thomas Huth on a different patch.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201023210637.351238-2-hskinnemoen@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Starting with meson 0.56, colons are used to separate the subproject name
from the test name. Use dash or slash depending on what looks nicer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test exercises the various modes of the npcm7xx timer. In
particular, it triggers the bug found by the fuzzer, as reported here:
https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02992.html
It also found several other bugs, especially related to interrupt
handling.
The test exercises all the timers in all the timer modules, which
expands to 180 test cases in total.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20201008232154.94221-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the device fuzzer finds more and more issues.
For every fuzz case, we need not only the fixes but also
the corresponding test case. We can analysis the reproducer
for every case and find what happened in where and write
a beautiful test case. However the raw data of reproducer is not
friendly to analysis. It will take a very long time, even far more
than the fixes itself. So let's create a new file to hold all of
the fuzz test cases and just use the raw data to act as the test
case. This way nobody will be afraid of writing a test case for
the fuzz reproducer.
This patch adds the issue LP#1878263 test case.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200921160605.19329-1-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
[thuth: Slightly adjusted commit message, removed empty lines]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test 067 from qemu-iotests is executing QMP commands to hotplug
and hot-unplug disks, devices and blockdevs. Because the power
of the text-based test harness is limited, it is actually limiting
the checks that it does, for example by skipping DEVICE_DELETED
events.
tests/qtest already has a similar test, drive_del-test.c.
We can merge them, and even reuse some of the existing code in
drive_del-test.c. This will improve the quality of the test by
covering DEVICE_DELETED events and testing multiple architectures
(therefore covering multiple PCI hotplug mechanisms as well as s390x
virtio-ccw).
The only difference is that the new test will always use null-co:// for
the medium rather than qcow2 or raw, but this should be irrelevant for
what the test is covering. For example there are no "qemu-img check"
runs in 067 that would check that the file is properly closed.
The new tests requires PCI hot-plug support, so drive_del-test
is moved from qemu-system-ppc to qemu-system-ppc64.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the extra sources and extra dependencies of qtests are held
in two separate dictionaries. Use the same trick as tests/meson.build
to combine them into one. This will make it easier to update the
documentation for unit tests and qtests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
arm-cpu-features got dropped from the AArch64 tests during the meson
conversion shuffle.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-6-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Laurent Vivier